When I transfer to the Develop module I get a message " The Folder could not be found"
The photo shows up but I am unable to edit the photo. What am I doing wrong?
If you are still using a Cloud-acquired version then yes you should uninstall and reinstall using a licensed version.
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
Similar Messages
-
When I typed in -/Library/Keychains/ in the Go To Folder box, I got the message that the folder could not be found. Possibly related to that, when I did a permissions repair I got this message "SUID file sys/Lib/CoreS...has been modified and will not be repaired. How can I undo the problems that Mavericks 10.9.1 seems to have caused?
1. You need to type or paste in ~/Library/Keychains/ and not -/Library/Keychains/.
2. If the repair permissions message refers to ARDAgent, it's normal.
(95401) -
ipod touch..when I plug in to laptop, itunes comes up and I get this message. "Itunes could not connect to thehe Ipod because it is locked with a passcode. You must enter your passcode on the ipod b/4 it can be used with Itunes" It is stuck on the cord/itunes screen and cannot go any further...HELP
Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.
-
Get error message that server could not be found when sending email thru iPhoto
I have established a icloud/mobile me account. Trying to use iphoto to send photos with emails and always get error message that server coule not be found.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
When trying to sync my iPad I am getting a message stating that iTunes could not connect to the iPad "iPad " because an error occurred while reading from the device
Hi Centreless,
If you have difficulty with your iPad not being able to connect to iTunes in order to sync, you may want to try the troubleshooting steps in this article -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks for using Apple Support Communities.
Best,
Brett L -
"The folder could not be found" error message
I recently had Windows XP problems sever enough to cause me to reformat my hard drive and reinstall XP and all my programs. This resulted in drive letter assignments different from what I had before. I saved copies of my LR catalog in multiple locations to be safe. When I open Lightroom and point to the Catalog I get the error above when in the Develop Module and a "offline or missing" error code when in the Library Module. Obviously LR is looking for the files where they were before. I had been working with image files stored on K:\ but now those files are on H:\. I see three solutions: 1) do a reassignment of drive letters in Windows; 2) move the files from drive H:\ to drive K:\; 3) edit the target drive spec within the LR catalog (is this doable?). Does anyone have any comments on the merits of these solutions and any caveats to observe along the way? TIA, njb
Right click on the top level missing folder, then choose Find MIssing Folder from context menu. This will open a dialog from which you can navigate your way to the new location. Once selected Lr should relink to the missing files
-
The folder could not be found in the develop module
I moved the photos from C: to D: as my c drive out of space, now if I open the catalog I cannot edit the file How can I re point the catalog to drive D?
Adobe Lightroom - Find moved or missing files and folders
-
Please help
Try resetting your iPad. Press and hold the top lock button and the home button until it shuts off. Then press and hold the lock button. Release it once you see the Apple logo.
-
When I try to download 6.0 I get a message saying it could not be opened
Refuses to download
If you can read the message you could provide the exact wording.
With the exact wording somebody could pull up more information from a search here, or through Google. That could even be you.
However since we have gone from 4.0 to 5.0 to 6.0, you might check out Fire Wall problems.
* Firewalls - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Firewalls
* Firewalls | How to | Firefox Help<br>https://support.mozilla.com/kb/Firewalls -
The "view and organize photos" mode seems to work just fine, but when I attempt to open the "edit and enhance photos" mode, I get an error box with this message: "Could not load the FastCore Routines module because the file could not be found", and then it shuts down after I click ok. I have installed the 5.0.2 patch and have uninstalled and reinstalled the program, to no avail. I had no firewall running when installing the program, nor do I own the program "Clean Sweep". What can I do?
Thanks for any help
OS = Windows Vista.CANNOT LOAD FASTCORE ROUTINES, MMX CORE ROUTINES,
MULTIPROCESSOR SUPPORT NOT FOUND
SUCCESSFULLY REPAIRED - STEP BY STEP
I made the repair for Elements 5 on an XP version Operating System PC by doing this:
I went to....
Start / All Programs / Accessories / Windows Explorer
and selected.....
My Computer / C:
which is my drive with its operating system where Photoshop is installed.
I then clicked....
Documents and Settings
Then - in each - of the three icons I found.....
All Users, Default User, and Owner
I went into....
Application Data / Adobe / Photoshop Elements
In that last file I removed ALL the contents.... IN EACH !
After rebooting, my Photoshop Elements 5 started to work.
I think with research and all I invested five hours. May this save you 4 1/2.
I was paranoid and put the contents of each file into a new file I identified
clearly in case it I have to replace one of the parts out in the future.
I hope this is of help to some future reader.
Other comments here seem to indicate that this solution has
worked in version 4 and up and fixed early versions of Vista.
This appears to be a common problem after a drive repair or partitioning.
Why they can't just tell us this is a mystery to me.
-- Bon Courage! --
Ken -
When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.
When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.
-
After upgrading to Maverick, when I double click on the attachment I get this message "...could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location." It happens for all types of files.
Any suggestions as how to fix this?
I'm on a Mac OS X 10.9.3 with Thunderbird 24.5.0Thunderbird > preferences (I think on a mac) and under attachments set the folder
-
I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??
I haven't kept records of the songs I have paid for, and a number of songs have recently been displaying this message, making me search my computer for them. Most I have been able to find, but this one immediately "disappeared" the moment I attempted to play it after downloading...... how do I either get it back or get my money back???How did you do this move? Unless you know what you are doing you have to move the whole, complete iTunes folder.
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381 -
When I click on an Icon on my desktop to take me to a site (such as Google) I get a message that it could not find the location. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened. Then when I close the window I see that the message is still there. I have to close it separately. Any suggestions? Oh, and this only happens if Firefox is NOT already active. If I have another Firefox window open when I click on the Icon, it just opens as expected. This message appears no matter which site Icon I select. It did not happen before I upgraded to ver 9.0.
Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz -
I saved a file on my mac on Word, but today when I went to review it, it said the "document could not be found" and then asked if i wished to locate the file myself, but when I went to do so it said the same thing again. How do I find this file?
Let's go out and come in again!
What version of Word on what Mac running what version of OS X?
Did you give the file a name? In what location did Word last save a file - because that is where it is likely to be.
Maybe you are looking for
-
How to install windows based applications on macbook?
i am trying to install certain computer games like call of duty on mac ......which i had on my PC but when i click on setup file well it just shows .....this file cannot run on mac...so what do i have to do to make it work on mac???please do tell
-
DVD software that supports adding 24 bit/96 kHz stereo PCM to video
Does anyone know which DVD authoring software supports adding stereo PCM 24 bit/96 kHz files created by say recording using the Audigy 2ZS ?Most DVD authoring/burning software I've seen only seems to recognize/support 48 kHz sampled PCM audio, but vi
-
XL Reporter- Report by Sales Rep show the same sales rep for all customers.
Hi, When creating a report using XL reporter, Sales report by Item detail for all customers with selection by Sale rep ( expression) parameter, the report shows the name of the first selected sales rep name all through the report. Please comment if t
-
Lightroom 5 Video: any way to import w/out audio or remove audio during export?
I 'd like to use some lightroom presets on my video files but need to drop the audio. Any way to do this when either importing or exporting? Can't find a way - thanks!
-
Updating iOS: Errors 3014 and -1
I'm trying to update the iOS on my iPhone 4 and got error 3014. I took off the security firewall, made sure the iTunes software was up to date, made sure the windows firewall was off, ran the iTunes network diagnostics (showing green lights for every