When I try to import .olm files from my external hard drive back up, where do they go? It says on different forums they go to the "on my computer" folder but they are not there

When I try to import .olm files from my external hard drive back up, where do they go? It says on different forums they go to the "on my computer" folder but they are not there.
I go through all the instructions but then my emails do not appear. I'm starting to panic a bit!

You might want to try asking on the MS Office Outlook forum - http://answers.microsoft.com/en-us/mac/forum/macoutlook - since those are Outlook files.
Also note which method you're using to create a backup.
Clinton

Similar Messages

  • Can I import .MTS files from an external hard drive into Final Cut Pro X?

    Can I import .MTS files from an external hard drive into Final Cut Pro X?

    Luis Sequeira1 wrote:
    b) Use an utility like Clipwrap or MPEG Streamclip to convert the mts file to a quicktime (mov) file
    Luis,
    Just to clarify one point…in order for Streamclip to convert the MTS I believe a plug-in like the AVCCAM QuickTime importer from Panasonic needs to be installed. (Credit David McClain over at the FCS boards for that info.)
    Russ

  • Importing .mxf Files from an external hard drive...

    Any advice or tips would be greatly appreciated. My problem comes close to others discussed, but I haven't been able to find a duplicate post. And I apologize for the length; I just want to give you as much info. as possible (I also put details in my signature) to help you help me.
    I shot a short film using Panasonic's HVX200 camera, filming in HD 720p/24p, and downloaded each P2 card through a PC laptop into a LaCie Brick external hard drive. I was originally planning on editing the footage with Adobe Premiere Pro 2.0, but became frustrated with how much trouble it was having handling the .mxf files. Assured by Apple salespeople that FCP 5 would have no problem importing the footage from an external hard drive, I purchased the computer described in my signature.
    Now I know that FCP/Apple only supports importing footage from the P2 card directly, and not from an external hard drive. A representative from ProMax.com was able to help me out, however. First, he had me copy the footage files onto my Mac internal drive from the external hard drive. Then, he had me select IMPORT -> PANASONIC P2. Then, I was to highlight the CONTENTS folder and import away. And it worked... sort of.
    There are two major problems: 1) During this transfer, not all of the footage is making it across. I import it, and then get the much-talked about "one or more P2 clips failed to import; probable incomplete or corrupt clips" warning. After checking the original video folder on the internal hard drive and comparing it to the number of clips FCP imported, I learned that I had lost around 20 clips/video files at one point. Other shooting day transfers worked completely smoothly with all of the files imported (we split up the footage by shooting day, without touching or changing the CONTENTS folders). So, some transfers work and some don't. And 2) When I try to import the files from our 4th day of shooting, I get a "Selected path does not contain a P2 volume." Nothing is imported.
    So, that's my situation, and I'm getting very desperate. I know that I'm not doing things in the Apple-supported way, but I'm really hoping there's still someway to successfully get the files from the external hard drive into FCP completely. It seems to work some of the time.
    Final notes: When importing, I make sure to import the entire CONTENTS folder. There is never a LASTCLIP.TXT file listed under it in the window, but some of the days of footage have transferred perfectly, so I'm hoping that's not a dealbreaker. If it is, isn't there some way to rebuild a lastclip.txt file? I don't even know if that's the issue. And one last note: In most of my folders, the "CLIP" folder has a number of files in it. In the 4th day's footage that I can't import at all, I noticed that the CLIP folder is empty. And on the days where FCP isn't importing all the files (like I mentioned above), there isn't a CLIP file for every single VIDEO file. Could this be the main problem? Along this line, is there a way to somehow put the footage on the external hard drive back through a p2 card and then into the Mac?
    Okay, I'll stop typing. Thank you so, so much for any help.
    Tom
    PowerMac G5 (Dual 2.3 GHz)   Mac OS X (10.4.6)   Quicktime 7.1.1 - Final Cut Pro 5.1 - Aforementioned External Hard Drive: LaCie Brick (FAT 32 based)
    PowerMac G5   Mac OS X (10.4.6)  

    The problem didn't turn out to be as complicated as I had thought. The process I described above ended up working fine, and I'll explain how. And this is a cool workaround, because the AppleCare helpers told me that they didn't think it would work (FCP P2 import is only supported straight from the P2 card/viewer or the camera).
    I hooked up my external hard drive to the Power Mac G5, and copied the files and folders onto my internal scratch disk. Then, I opened FCP and chose IMPORT -> Panasonic P2. I chose the "CONTENTS" folder for each day's filming, and imported them in, no problems. There was no visible "lastclip.txt" file shown (under the "CONTENTS" folder or anywhere else), but this didn't seem to cause any problems.
    The reason that not all of the footage was bring imported (the aforementioned "one or more P2 clips failed..." warning) was because we were missing clip files (in the CLIP folder) corresponding to certain video files (in the VIDEO folder). Luckily, we had just forgotten to transfer all of them from the original external hard drive, and once we transfered them completely, FCP could read all the video files. FCP needs a clip file for every video file in order to make it work (that's why our aforementioned "Day 4" could not be read; we hadn't copied all of the clip files over with the video files).
    Even after we did this, we STILL were getting the "one or more P2 clips..." warning for our Day 5. After taking a look at all the folders, we figured out that there were still more files in the VIDEO folder than in the CLIP folder, even after we transferred them all over. Finally, we figured out what had happened. For some reason, some of the audio files for some of the clips had been included in the VIDEO folder for our Day 5. There is no way we did this accidentally; somehow, the HVX200 placed some of the audio files into both the VIDEO and AUDIO folders. And FCP was trying to read those as video files, and therefore couldn't find the corresponding clips in the CLIP folder. After making sure that those audio files were also in the AUDIO folder, we simply deleted them from the VIDEO folder and stopped getting the "failed to import" warning.
    Final thing to share: If we had actually been unable to find the corresponding clip files in our original external hard drive, we had also found a potential solution (that we didn't end up needing to try). You can record from FCP back onto the P2 card, in the hopes that the clip files would be regenerated when you re-import it into FCP. I received a PDF file about this process, and I'm not sure how to put it up on the page here. If interested in this described process (which, again, I can't fully vouch for), feel free to email me at [email protected] and I can forward it to you.
    Hope this helps.
    PowerMac G5   Mac OS X (10.4.6)  
    PowerMac G5   Mac OS X (10.4.6)  

  • How do I import wav files from an external hard drive into itunes converting to aac?

    I have 270 gig of wav files on an external hard drive.  I am having trouble finding a way to import these into itunes while converting to aac

    Note that .wav files do not carry a tag. If you import files of the form ..\<Artist>\<Album>\## <Name> into iTunes it will fill in the name property as the filename ## <Name> and all other fields will be blank.  Assuming there is useful data in the path to capture, use Edit > Preferences > Avanced and disable the Keep... and Copy... options before adding the tracks to iTunes. You can then use the script TagFromFilename to fill in the blanks. Once this information is there you can convert the files to their new format and the converted files will inherit the track details.
    You might want to consider initially converting to Apple Lossless which could halve the physical size of the collection with no loss of quality, and permanently embed the tag details. You can then choose to make a downsampled collection while retaining the full quality lossless copies and completely discarding the .wav originals.
    tt2

  • How do I copy backed-up files from an external hard drive back to my MBA, but under a different user than the one from which they were backed up?

    On the advice of the Chicago Mac Genius Bar, in order to get better performance on my few years old MBA, I copied my Home folders (but not Library) to an external hard drive, created a new user, deleted the old user, and tried to copy the Home folder contents from the external hard drive back to the MBA under the new user. However, I get an error message and can't open most of the folders on the external hard drive (e.g. "The folder “Desktop” can’t be opened because you don’t have permission to see its contents.") Help! Thanks.

    As captfred says, yes (as long as the drive is formatted for a Mac, not Windoze).
    You might want to review the [Time Machine Tutorial|http://www.apple.com/findouthow/mac/#timemachinebasics] and perhaps browse [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

  • How do I import .mxf files from an external hard drive onto FCP 5.1.4?

    I have an external hard drive and it is full of .mxf files. I am trying to import them but when I click import-folder, the only thing it imports from the Contents is the Icons folder.
    Next, I try to log and capture. It tells me I can only capture now, so I click "Now" and a viewer window flashes with nothing in it, then disappears. And then nothing happens.
    Also, I don't even see the "Log and Transfer" button. Is that because my version is too old?
    Can someone who knows a lot more than me give me guidance so I can be concerned with actually editing it in my time sequence? Thank you!

    #36 - One or More P2 files failed to import.
    Shane's Stock Answer #36 - "One or more clips failed to import..."
    Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
    What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
    ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
    ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
    ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.
    Shane

  • How do I import movie files from my external hard drive into I-Tunes?

    Hello
    I have a whole load of movies and tv shows stored on an external hard drive. I would like to import a few of them into I-Tunes and then on to my Ipad because I'm going travelling tonight.
    I'm dragging the file into I-Tunes but it won't copy. They are mp4 files.
    I have one mkv file which I am trying to drag also.
    If anyone has any tips I would be grateful.

    im not sure why the mp4's wont go i, but the mkv is not a supported format. i would look into some sort of video converter.

  • Why can't I import video files from an external hard drive?

    I am using Adobe Premiere Elements 12 on Mac OSX 10.7.5 trying to import video files from a Lacie Rugged External Hard Drive using both firewire and usb, neither with any luck. The error message I receive is:
    "You're trying to import a file from a DVD or a Removable Media.  Please use Video Importer for importing Videos and Image Importer for importing images. "
    We can't import through the video importer either because the hard drive doesn't show up. We can, however, drag the videos to the desktop and do it that way but we'd like to avoid doing that if possible.
    Thanks
    By the way, the external hard drive is formatted FAT32 if that matters

    Tacomedia
    http://www.cnet.com/how-to/how-to-set-up-an-external-hard-drive-for-use-with-os-x/
    Please check out the above with regard to your external hard drive FAT32 and Mac computer question
    By the way, the external hard drive is formatted FAT32 if that matters
    SG has already commented on this in his initial reply to you. I thought that the above might blend in to supplement what he has said.
    I will watch for further developments in your troubleshooting with SG.
    ATR

  • How to import recovered files from an external hard drive

    My hard drive crashed. I got a new one and of course lost my itunes.  I had the recovered data put on an external hard drive.  How do I re import my data back into Itunes?

    Hello David,
    Thank you for using Apple Support Communities!
    If you have the entire iTunes library folder on that recovered drive, you can copy it to your new computer and use this article to choose that iTunes library that you just copied to the new computer.
    iTunes: How to open an alternate iTunes Library file or create a new one
    http://support.apple.com/kb/HT1589
    Otherwise, you would need to use the Add File to Library function.
    Adding music and other content to iTunes
    http://support.apple.com/kb/HT1473
    Regards,
    Sterling

  • HT4991 When I try to import word files from email it says importing then few seconds later shuts pages app

    When I try to import word files from email it says importing then few seconds later shuts pages app

    Peggy, thanks for the try. I think you are on to something about the multitude of sections in the sample document.
    I think the many many sections are a result of the formating to make the word document look just like the legal case book (multiple columns of text, special sections, graphical headnotes summaries etc). The doc opens just fine in Word for windows 2000, XP and 2003. Maybe I can request a NON columnar flowing word doc that will be possible to open with Pages 3.
    In the meantime, the other good options for these legal document downloads, PDF and HTML are not good options for processing the files with Pages. I sure hope the interoperability of Pages 3 is enhanced soon. I would rather not buy the Office 2008 for the Mac if I could stick with Apple's products.
    By the way, do you know...... is there a business, marketing, or technical reason (maybe all 3)) why Text Editor seems to have greater capabilities than Pages 3 (like HTML and similar functions)?
    Thanks, Brian

  • I imported files from an external hard drive to Itunes on a new computer.  they imported & play fine, but the ratings & playlists are gone & i am unable to update any info.  I found a file name playlist on old drive & imported now most files are missing!

    I imported files from an external hard drive to Itunes on a new computer.  they imported & play fine, but the ratings & playlists are gone & i am unable to update any info.  I found a file name playlist on old drive & imported now most files are missing!  Help!

    Can you locate the iTunes Library.itl file on the old drive? Ideally you would have simply copied over the entire iTunes folder structure from <User's Music> on the old computer into <User's Music> on the new one to transfer the library will all playlists, ratings, play counts etc. intact.
    tt2

  • My hard drive failed. I was able to restore my files from an external hard drive. I have my bookmarks saved but am not able to import them into Firefox as the only option is to import them from another browser. Any suggestions?

    -My hard drive failed.
    -I was able to restore my files from an external hard drive.
    -My bookmarks are saved to a folder on my new hard drive.
    -I am not able to import them from this folder on my hard drive into Firefox.
    - the only option Firefox offers for importing bookmarks is to import them from another browser...is there another way?

    In Firefox the bookmarks are saved in a database file called places.sqlite in the profile folder. If you have got this file from the external hard drive you can restore the bookmarks by copying this file to your current profile folder. For details of the location of the profile folder see either https://support.mozilla.com/kb/Profiles or http://kb.mozillazine.org/Profile_folder_-_Firefox

  • How do i import my library from an external hard drive. Exported it as had to wipe pc and reinstal windows but when i try to import nothing happens

    How do i import my library from an external hard drive. Had to export it as had to reinstal windows due to a conflict between windows and i-tunes. Wen i try to import nothing happens despite selecting the file. Can you import from an i-phone to i-tunes?

    What do you mean bye exported the library? 
    There is nothing to export or import.
    The correct process to backup the iTunes library would be to copy the ENTIRE iTunes folder from the computer to the external drive.

  • HT201250 Is there a possibility to recover erased files from an external hard drive that was reformatted by the Time Machine?

    Is there a possibility to recover erased files from an external hard drive that was reformatted by the Time Machine?

    Basics of File Recovery
    Files in Trash
    If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location.  OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
    If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone.  Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • How do i copy my files from my external hard drive onto my imac

    how do i copy my files from my external hard drive onto my imac

    You should be able to 'migrate them' without having to do so during a reinstall, from an external drive. In some cases, you may be able to use TimeMachine software even if the drive had not been used as a backup.
    The usual way, though, is to drag & drop copy from one to another (volume or folder) you created in there and have open. Or drag an item on top of the icon of a hard disk drive when it is mounted on the desktop. I'm used to working with open folders and windows, because that works best; and then see if I want to change how things look inside their destination. This helps should I later want to burn them to a DVD and have it correct. And I want to know where they are.
    I had more links to some information about importing or migrating data into a Mac from an external, a week ago, but can't find them now. A few good links to pages, but I think I posted what I did find directly to answer someones question about it; and believe the info was in an Apple Support article about TimeMachine, near the lower part of the page with blue words with a disclosure triangle, so you could read more in that page. But I don't believe these two are correct in that TimeMachine (some versions) only allow wireless backup to a drive in a base station unit such as Apple sells, for this. The link I saw simply said how to work around not using the wireless stuff. Maybe it was a dated item, not in these?
    See a main general portal to TimeMachine support,
    here: http://www.apple.com/support/timemachine/
    Or basics that may not provide optional copy methods:
    Mac Basics - Time Machine backs up your mac:
    http://support.apple.com/kb/ht1427
    Perhaps a search of Apple Support database (or even ASC discussions?) would yield ideas, and perhaps find what may work for the kind of files you want to copy, and where they can be found & used later. Are the files for specific applications? Or images, music, etc?
    Good luck & happy computing!
    edited.

Maybe you are looking for

  • Adobe reader 9.0 + Adobe Acrobat 5.0 on Internet explorer 7.0 ?

    Hello! I possess Adobe Acrobat 5.0 to create some PDF documents I possess Adobe Reader 9.0 to read some PDF The 2 programs operate WindowsXP SP3 well. I don't manage to open a PDF file with Internet Explorer 7.0 = he looks for has open Acrobat instea

  • Regarding Line Item Selection and product category

    Hi Experts, We are having a requirement in Line Item Selection in Oppurtunity.The requirement is that we need to display only the product categories belonging to that particular company(for eg Product Categories belonging to Company X) by restricting

  • Sub queries and Triggers

    Hey everybody,  I'm having this problem creating this trigger.. This errors keeps popping up "Only one expression can be specified in the select list when the subquery is not introduced with EXISTS" The code is intended to send a message to the selle

  • Open Mail Attachment without having to save file

    I'm pretty sure I should be able to double click the icon for an attachment in Mail and it should open with the program from my preferences. I can't even right click the file, choose open with, and select what I want to open with. Mail just sits ther

  • Passing Parameters to a Fragment

    I want to use a fragment as a header with 2 levels of tabbed panes. The tabs will be selected with CSS classes. How best can I pass the parameters to the fragment? I could make "groupname" and "pagename" session variables, but is there a way to pass