When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First -  close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

Similar Messages

  • Shared videos won't play because the 'operation could not be completed'. Solutions?

    I have recently shared some videos with some friends over iCloud photo share but they will not play because 'the operation could not be completed'. Is there a solution for this other than deleting and starting again?

    mc,
    In your first post you stated:
    I checked permissions and nothing came up wrong.
    Did you accomplish that by using "Repair Disk Permissions" in Disk Utility, or did you actually check the "Ownership & Permissions" of your Desktop Folder using the "Get Info" command in the Finder?
    Click on your Desktop in Macintosh HD>Users>yourusername, and then choose Finder>File>Get Info. Under "Ownership & Permissions," it should say "You can {Read & Write}."
    If that is not selected, then change it to "You can {Read & Write}."
    ;~)

  • I have had 4 mac computers and after years of downloading songs from itunes, I keep recieving a message that I need to set up an account.  when I try to make a new account, i get an error that says i already have an account.  please help!

    I have had 4 mac computers and after years of downloading songs from itunes, I keep recieving a message that I need to set up an account.  when I try to make a new account, i get an error that says i already have an account.

    Have you tried checking the Store drop-down menu in the iTunes interface to see if you are signed in the existing account?

  • Every time i try to create a new movie or a trailer an error message appear saying:"the operation could not be completed. no other information is available about the problem."

    every time i try to create a new movie or a trailer an error message appear saying:"the operation could not be completed. no other information is available about the problem."

    Open the iCloud preference pane and uncheck the Contacts box. Do the alerts stop?

  • What does "The operation could not be completed because an error occurred when creating frame 0 (error -1)." mean, and why does it keep happening?

    So I've been trying to export a video file from Motion 5 (and FCPX), and I keep recieving the message "The operation could not be completed because an error occurred when creating frame 0 (error -1)". I've found the problem has something to do with a video file in the project, Ive tried multiple versions of said file, in multiple formats (.mov, h264, etc.), and I keep getting the same result.  The file was originaly a 640x480 wmv file. Any suggestions?

    I ended up figuring out a solution, but I'll get to that in a sec.
    To answer your question, I converted the .wmv file in a program called Media Converter (available in the App store), and converted it to an h.264 file (then later to a .mov file, and then to an .mpg). I could view the file, and work with it in projects, but any project I tried to output with any version of said file, would result in the afor mentioned message, with the same results in FCPX (and Compressor 4 as well).  I tried multiple frame rates, resolutions, files types, re-converting the file, all with no luck.  My impression from said experiments, and reading other discussions was that it was a corrupt file. 
    Then I got frisky...and a little desperate. I brought the converted file (the .wmv to .mov) into Motion 4... and an export worked first try.  So I exported a pro-res file from Motion 4, and used that file in the already built Motion 5 project, and voila! 
    So, who knows what that means in real terms, as for the whats and whys.

  • HT203477 it says save operation could not be completed when I make a new project... what happened?

    it says save operation could not be completed when I make a new project... what happened?

    This is happening to me as well. No solutions from anyone. When it happens, it does not matter which drive I try to save to ... it won't create a new event or project ANYWHERE. I usually have to reboot.

  • What happen of"The operation could not be complete...

    i have a serius problem of this kind of stuff...
    What the meaning of"The operation could not be completed"
    when i perform update of my phone massage in nokia pc suite, it came out of this kind of error...
    so that i cant get any massage form my phone, who can help me in this problem? i was in a urgen. Thank you very much!

    You can try to execute PC Suite Cleaner with option "Problem using Nokia PC Suite". It is told (http://europe.nokia.com/A4144912) that that should fix this kind of problem.
    BTW, what model of phone you are using and how many messages you have in Inbox?

  • When restoring an iPhoto library I got an "unexpected error" message and the operation could not be completed. Is my best choice to try again?

    One of my external hard drives died. I had several iPhoto libraries in it. Fortunately, I used Time Machine to backup to a Time Capsule and I can see all the iPhoto library icons in Backups.
    When restoring the first iPhoto library, after three hours, I got an "unexpected error" message and the operation could not be completed. Indeed, the restored library is smaller than the library in Backups. Is my best choice to try again and replace the restored library (which apparently must be missing some photos)? It would mean another 3 hours plus of restoration with fingers crossed...
    Any suggestions? Thank you in advance!

    I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
    Mount the TC sparsebundle and verify it using disk utility.
    A5 here. http://pondini.org/TM/Troubleshooting.html
    You might also like to load the widget in Time Machine so you get whatever the full error message is..
    I cannot find any reference to the error code you are getting..
    My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
    Use the manual methods pondini recommends.
    http://pondini.org/TM/FAQ.html
    Q16 17
    Use ethernet only. Turn off wireless so it does not enter the situation.

  • Please help i can't share my project I did try in all of them and it doesnt work it apears like that........ The share operation Master File has failed The operation could not be completed because an error occurred when creating frame 608 (error -1). and

    I did try in all of them and it doesnt work it apears like that........
    The share operation Master File has failed
    The operation could not be completed because an error occurred when creating frame 608 (error -1).
    and i dont know what to do plese hlp me....
    Re: when i try to share my project to quicktime aroun 50% appears error -1 and i can't share it what to do please help 

    Double post…

  • Launch PB in CS5 and get "The operation could not be completed."

    I had been using the PB plug-in previously and it worked fine.  Since that time, I have installed no new hardware or drivers but have installed Topaz Adjust 4 filter.  Now, when I have an image opened in PS CS5 and I click Filters -> Pixel Bender -> Pixel Bender Gallery... I get a modal dialog with the title Error and the message "The operation could not be completed."  I tried reinstalling the extension and no luck.
    Here's some relevant info:
    Adobe Photoshop Version: 12.0.1 (12.0.1x20100625 [20100625.r.1146 2010/06/25:17:40:00 cutoff; r branch]) x32
    Operating System: Windows XP 32-bit
    Version: 5.1 Service Pack 3
    System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2
    Physical processor count: 2
    Processor speed: 3073 MHz
    Built-in memory: 2045 MB
    Free memory: 360 MB
    Memory available to Photoshop: 1634 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1050, right: 1400
    Video Card Number: 1
    Video Card: NVIDIA GeForce FX Go5600 (Sony)
    Driver Version: 6.14.10.4690
    Driver Date: 20031106141200.000000-000
    Video Card Driver: nv4_disp.dll
    Video Mode: 1400 x 1050 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce FX Go5600 (Sony)
    Video Card Memory: 64 MB
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5\
    Temporary file path: C:\DOCUME~1\matt\LOCALS~1\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Startup, 73.2G, 12.2G free
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5\Plug-ins\
    Additional Plug-ins folder: not set
    ...snip...
    Installed plug-ins:
    ...snip...
       Pixel Bender Gallery 12.0
    ...snip...
       Topaz Adjust 4 10.0
    ...snip...
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
       Access CS Live
       CS Review
       CS News and Resources
    Installed TWAIN devices: NONE

    I take it you've rebooted your machine a few times since all this has happened? Something must have changed to cause this problem. You could try deleting the Photoshop preferences and the Pixel Bender plugin preferences. You doublechecked that you have the latest drivers from nVidia (and you did so by manually comparing the result provided on the nVidia driver page with the driver version found in the Display preferences? Are you running on a laptop? If so, who is the manufacturer?

  • PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC

    Dear Adobe Community,
    I got my first imac a few days ago, and i decided to install Adobe CC.
    When i want to run Adobe Bridge, says "the operation could not be completed", the same happens with Adobe After Effects.
    And I also have a problem with Premiere, when i want to export a project says that premiere must close.
    This is the try version, is this a problem of Adobe or Apple? i'm very worried
    Help!
    Thank you!
    Ivana

    Muchas gracias!!! Ha funcionado!
    El 11/02/2014, a las 00:02, Federico Platon <[email protected]> escribió:
    Re: PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
    created by Federico Platon in Foros de usuario a usuario - View the full discussion
    Confirma que se trata de una cuestión de permisos.
    Por cierto te aconsejos actualices la 9.1  a 9.2, posiblemente se habría arreglado así también.
    Bueno los pasos son:
    2. Select Go from the Finder Menu.
    3. Select Computer.
    4. Select Macintosh HD.
    5. Select Users.
    6. Select your user profile.
    7. Right click on user profile. Select Get Info.
    8. Go to bottom and unlock with admin password to make changes.
    9. Make sure your user profile has Read and Write privileges by selecting from dropdown menu.
    10. Go down to wheel at very bottom and select Apply to enclosed items. This should allow Adobe Bridge to run properly.
    Creo que no se necesita traducción.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6107188#6107188
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6107188#6107188
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6107188#6107188. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Foros de usuario a usuario at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Install Problem "Error: -48  The operation could not be completed... "

    I am unable to install the "Take Picture Action Installer" from http://automator.us/downloads.html#1026
    The error message is "Error: -48. The operation could not be completed because there is already an item with that name."
    However I created a test user on the system and was able to do the install there just fine. Anyone know how I could fix the problem?
    Thanks

    Hi Aaton
    I have not had a problem with that download (since your post)
    There is an Automator "Take Picture" action which is owned by the system (Macintosh HD/System/Library/Automator/) which appears under the Image Capture library
    The .zip file which you downloaded should go into Your user name/Library/Automator/ and is named "NYHTPROD-Take Picture.action" and appears under the Photo Booth library. It says that is the destination in the panel when you unzip the file
    Suggest you have a look around those libraries and check things are as they should be then try again
    chris

  • The Operation could not be completed. No other information is available about the problem.

    MAC OSX 10.8.5
    Processor 2.7 GHz
    Memory 4GB1333 MHz DDR3
    Logic Pro 9.1.8 (1700.67) 32 BIT
    "The Operation could not be completed. No other information is available about the problem."
    Uploaded on google drive a series of project files. downloaded them and now the message above is what pops up effectively blocking me from my work. After talking with google support, they confirmed the successful upload and download with no file corruption. All file extensions are the same. Can someone please help.
    Sincerely,
    Butta Love

    Try the following..
    Compress the audio files before uploading them to Google.. using Apple's built in file compressor... (Right/Control click on an audio file and choose compress from the popup menu...
    Download from Google and then decompress audio files..
    Now test in Logic and see if you get the same issue....

  • "The operation could not be completed" problem wit...

    I have just upgraded to 6.83 from 6.81 and every time when I use the phone manager the error message "The operation could not be completed" appear (although despite the messages, it works well). I try to search the problem in the faq as well as in the forum. There turn out to be a solution to use the cleaner program. However, the program will not work with 6.83 nor Vista. I try to reinstall the PC suite but it fails. Anyone has encountered the problem or is there any solution?

    13-Apr-200706:11 AM
    migget wrote:
    You can try to manually register file ole32.dll. In my computer, it seems to be in folder ..\system32 and ..\syswow64.
    I tried but the problem is still there.

  • Contacts application error: The Operation could not be completed. No other information is available about the problem.

    I get about one or two of these error messages, from Contacts each day: "The Operation could not be completed. No other information is available about the problem." It seemed to start after I deleted some of what appeared to me to be the duplicate cards between "On My Mac" and iCloud. I have Contacts version 9.0 in OS X 10.10 Yosemite on a MacBook Pro (15-inch, Early 2011). Anyone else seen this error?

    Try the following..
    Compress the audio files before uploading them to Google.. using Apple's built in file compressor... (Right/Control click on an audio file and choose compress from the popup menu...
    Download from Google and then decompress audio files..
    Now test in Logic and see if you get the same issue....

Maybe you are looking for

  • Steps to to enhance the existing cube and get the data from r/3

    I am at entry level. if i want to enhance an existing cube and pull data from R/3 into the cube what are the main steps i do. in my scenario - this is SD module. The infocude is  custom cube(CONTRACT cube) . I have to enhance this existing custom cub

  • Photoshop CS4 Extended ...Program's 'Help' does not work

    I have PS CS4 Extended ... the Help command does not work ... I get a message saying "there was an error launching th eAdobe Help application. You may need to reinstall the application and Help component. IK have un-installed the program completely a

  • Downloading songs from iPOD to new computer

    OK, seems like a common problem, yet all the FAQs and questions don't seem to get me where I need to go. My first authorized computer is fritzed, can't access itunes, so I loaded new version of itunes onto my new computer and want to download all of

  • XML QUERY HELP NEEDED

    Hi, Need help in writing a query. SQL> SELECT xmlelement("P",xmlforest(P.process_id AS Ppid),   2   xmlagg(xmlelement("PI",XMLFOREST( PI.question_id AS PIqid,   3   PI.process_id AS PIpid,   4   PI.innertext AS PItext),   5   xmlagg(Xmlelement("PO",x

  • Multiprocessing broken on CS5, OSX 10.5.8, AE 10.0.1.19

    We've been going around and around with our tech staff trying to solve this problem with no avail.  I first posted it here: http://forums.adobe.com/thread/780555?tstart=0 but wanted to make a new thread to see if anyone had a solution. Our company up