When I try to open an image straight from bridge to PS cs5 it trys to open it in Painter

Whwhat is causing Bridge to try to open images in painter

Click on edit/preferences/file type associations and migrate to the file type.  Change defalult from Painter to CS5.  May have to navigate to photoshop.exe location.

Similar Messages

  • Why won't files open in Camera Raw from Bridge?

    I am trying to open files in Camera raw from Bridge but get the following message.
    "Bridge's parent application is not active."
    Both Bridge and CS5 are open and I have opened camera raw previously.
    Any suggestions.
    Cheers

    Ah this is just because I haven't fully updated my bridge yet, but the solution still works fine
    Date: Mon, 10 Oct 2011 13:25:37 -0600
    From: [email protected]
    To: [email protected]
    Subject: Why won't files open in Camera Raw from Bridge?
        Re: Why won't files open in Camera Raw from Bridge?
        created by Noel Carboni in Adobe Camera Raw - View the full discussion
    The video shows replacing a current DLL file with one from last year - the key issue being that the files found in the Bridge and Photoshop folders are DIFFERENT. Why would this be?  I checked a PS CS5.1 installation myself and the files are already the same. Is there an illegitimate copy of Photoshop being used or something, causing these files to differ? -Noel
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3963527#3963527
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3963527#3963527. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Camera Raw by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • When I choose to open a new tab from a website, such as facebook, it always opens it in a new window. How do I change this to just opening a new tab. I tried changing the tab settings but it did not work

    When I choose to open a new tab from a website, such as facebook, it always opens it in a new window. How do I change this to just opening a new tab. I tried changing the tab settings but it did not work. I did not have the problem until I started using firefox 4.

    It is probably a JavaScript link.
    You can probably force it where you want it with a keyboard shortcut
    either "Ctrl+click" or "Ctrl+Shift+click". see
    * Firefox and other Browser Keyboard Shortcuts (Comparison Table)<br>http://dmcritchie.mvps.org/firefox/keyboard.htm
    ''Did that work?''
    Some styles that provide a warning as to the type of link:
    * No Follow links, mouseover id of other links - userstyles.org<br>http://userstyles.org/styles/10987
    * Change cursor on some links with JS. - userstyles.org<br>http://userstyles.org/styles/233
    * Link Warning - Themes and Skins for Mozilla - userstyles.org<br>http://userstyles.org/styles/1301
    * Link warning (cursor hover) - various filetypes - userstyles.org<br>http://userstyles.org/styles/2538
    * Red hand cursor for .pdf links - userstyles.org<br>http://userstyles.org/styles/553

  • Does iPhoto automatically edit my images straight from sd card BEFORE I import to iPhoto and edit myself?

    HI, Hope you can help with my query.  Does iPhoto automatically edit my images straight from my sd card BEFORE I import to iPhoto and edit myself?

    My Photography teacher told me yesterday morning that my 'images levels ‘ are being changed by my iPhoto.
    Just a couple of long shots, but there is an ever-so-slight possibility that what s/he's seeing is the result of changing the colour profile of the images? Adobe RGB to sRGB for instance? That would - or could - make the images seem a little different.
    And, of course, if the images are Raws then there could also be a significant difference between the preview rendered in camera and the one rendered by iPhoto.
    But in neither case would this mean the image has been edited in any way.
    Regards to Kildare.

  • I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac

    I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac

    The Mk III requires an updated version of Camera RAw, so run Help --> Updates and install it.
    Mylenium

  • Problem using Image Processor from Bridge

    I have been using the Image Processor to process photos from Bridge for quite some time. However, I recently received an error message when I try to initiate Image Processor from Bridge and I have not been able to find any help topics that address my problem: I select images in Bridge to process, then click "Tools>Photoshop>Image Processor". Photoshop opens and the familiar Image Processor dialog box opens. Item 1 in the dialog box says "Process files from Bridge only" and has the number of files I have selected in parenteses. I select the file type and other settings in #3, and preferences in #4. When I click "Run", I get an error message window that says: "Script Alert. There were no source files that could be opened by Photoshop". The Image Processor works if I open the files in Photoshop first, then run it by selecting "File>Scripts>Image Processor" and tell it to process all open files.
    Would someone be able to help me with this problem?
    Thanks, Larry

    Usually when it worked before and not now, and you have added no new software or hardware I recommend resetting the preferences.  Hold down the Ctrl key and click on the Bridge icon to start.  You should get a reset window with 3 options.

  • Using Image Processor from Bridge

    I'm trying to use the image processor from within Bridge. I have done this several times in the past, as recently as last week.
    I have some files selected in Bridge. I select "Tools>Photoshop>Image Processor" and the dialog box opens. Step 1 indicates that I have files to process (10 in this instance), and I have JPEG selected as the file type to process. When I click "Run", I get an error message that says "Script Alert" in the title. The message in the window says "There were no source files that could be opened by Photoshop".
    I opened the same 10 files in Photoshop, and I was able to run the Image Processor on them while they were open in Photoshop. I'd rather not do this unless I have to.
    I haven't added any new programs or plug ins since the last time I used the Image Processor from Bridge.
    I had the same problem in early June, and the solution suggested then fixed the problem. I'm experienceing the same problem today, and the same solution doesn't seem to be working now.
    The previous solution was to reset the preferences by holding down the Ctrl key and clicking on the Bridge icon to start. A reset window with 3 options popped up. Now, w
    I would sincerely appreciate any help you could give me with this.
    Thanks,
    Larryhen I hold the control key down and click on the Bridge icon, I don't get the reset window. I tried it by control-clicking on the Bridge icon from within Photoshop, and I tried it by control-clicking on the Bridge icon from my desktop with Photoshop closed.

    Read you original post again and your last post and now I am confused.
    You said you reset your Bridge preferences, yet in post #1 you said " I hold the control key down and click on the Bridge icon, I don't get the reset window. I tried it by control-clicking on the Bridge icon from within Photoshop, and I tried it by control-clicking on the Bridge icon from my desktop with Photoshop closed.
    So with this said you have not reset the preferences unless you have gone in and deleted the file.  The Bridge Icon is the one one the desktop that you click to start Bridge.
    BUT, in last post you say you have a Mac.  So to reset preference believe it is Cmd key.
    No matter how you do it you need to get the reset window with the 3 reset options.

  • CS5 Crashes using Image Processor from Bridge

    Photoshop CS5 64 and 32 crashes when using the image processor from Bridge after 200 images or so.  Converting 1000 RAW files to PSD or PSD to JPEG takes multiple reloads.  any ideas?

    I've encountered a non-repeatable variation of this problem from time to time: crash occurs at startup of image processor when Photoshop is open and has been running for some time.  (I've not seen the error where Bridge > Image Processor causes launch of Photoshop.)  Once I've started a run it has not failed to complete all images (but I'm not converting RAW files and not as many files as 1000).  ScriptingSupport.8li is listed in event log problem signature.

  • Batch image processing from bridge cause photoshop to crash

    But first it goes ahead and processes the images selected in Bridge. All of them like even over a hundred at a time (great time saver!). Then displays a message for each image in one error dialogue saying, "Sorry Photoshop couldn't process the image. . ." for each image.
    It also saves the images to the a folder above (in hierarchy) instead of the folder I select in the batch dialogue. I've tried using Batch process from within Photoshop and get the same result as image process from Bridge.
    While I am able to do the processing I need, it's annoying to have the force quit Photoshop each time, and Then to move the processed images where they belong.
    I am on a G5, 4mb ram, OSX 10.4.11. Photoshop CS3 #10.0.1, and bridge CS3 # 2.1.1.9.
    I usually do the updates when I'm alerted, but haven't heard of anything recently.
    Any ideas?

    Hi SSPrengel
    OK - maybe this will shed some light
    Try changing the size to something very small.- see below
    Try changing the compression. Not affected by the level of Quality (2% 50% or 100%) - all fail to load
    Try changing whether a color-profile is embedded or not. Not an option AFAIK in LR Export
    Try changing if the metadata is minimized or not. Not an option AFAIK in LR Export
    Try changing if the JPGs are exported relative to the source image or some fixed location. Exported to a specific location.
    If I use the Image export resize option it loads OK (resize to 1000*673 from 3916*2634).
    Older exports (from LR2.3 and earlier, of the same size image, and source DNG are OK)
    A centre crop from the Image (1205*691) is OK. A marginal crop (2 edges)  (3838*2552) is OK whereas a very slight crop at (3693*2614) FAILS
    The camera is Leica M8, images is in Leica RAW format (DNG).
    It appears to be function of Image export size (reduced either by Cropping or by 'Resizing on Export'
    Looks like a bug in LR2.6
    Message was edited by: V64
    PS I am using a G5 PowerMac with Tiger OSX

  • I used my military (.mil) address as the backup for my appleID account, but now that I need to open the verification email from apple, the .mil doesnt allow me to open and verify that I am who I am?

    I used my military (.mil) address as the backup for my appleID account, but now that I need to open the verification email from apple, the .mil doesnt allow me to open and verify that I am who I am?

    Hey Edgew7,
    Thanks for the question. The following resource may provide a solution:
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    3. Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't work, try these steps:
    1. Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    2. Tap Settings > iCloud and try to sign out.
    3. Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    4. Tap Settings > iCloud and sign in with the new Apple ID.
    Thanks,
    Matt M.

  • Tiff previously edited in ACR will not open in Camera RAW from Bridge

    Yes, I have googled this and found instances going back to 2010 with no satisfactory answer. I have Photoshop 5.1 and the latest ACR and Bridge that work with it. 2011 MAC Mini 10.8.2.
    I scanned a landscape oriented printed email image at 800 spi as a portrait orientation and saved it as a tiff. I opened this tiff in Preview and decided it needed more than minor tweaks so I opened it in ACR from Bridge, made a few adjustments and saved it. I thought I could see what I was doing better if it was in landscape orientation again so I opened it in Preview and rotated 90 deg CCW, saved it as a tiff. Going to Bridge I found Open in Camera Raw greyed out. I went back to Preview to see if I could get what I needed in its Tools while viewing it in landscape. Adjustments took forever this time, so I gave up and took a look at the image characteristics. Rotating in Preview had changed the image size to 3.3333...... times larger at 240 ppi still aRGB, still a tiff. This has never happened before, including slow adjustments
    I duplicated the rotated file and changed it back to 800 ppi and normal size, went to Bridge, Camera Raw still greyed out. Original unrotated image
    that had been edited in ACR and saved will still open in ACR.
    All kinds of strange things have happened since updating to 10.8.2, but I don't think this is one of them because of the complaints I have seen that date back to 2010. I did a full maintenance routine, i e cleared RAM, reboot in single user with fsck -fy, repaired permissions, back up with SuperDuper which repairs permissions again. Then I tried Bridge again, original will open, rotated won't.
    Anyone know the answe?

    The answer is that making edits in ACR and saving it creates layers in the tiff and Bridge will then not open it again in ACR unless you flatten it. I still don't know why Preview increased the image size by 3.333.....x or why ACR increased the tiff file size by 2.6x and why the flattened tiff is 2x the file size of the original scan but the image dimensions are the same. This stuff apparently is above the pay grade of anyone in google, too.

  • While browsing in Releaselog, I can't open a new Tab from a link(Ctrl left button). It opens in the same Tab and has just started happening

    While browsing in Releaselog, I can't open a new Tab from a link(Ctrl left button). It opens in the same Tab and has just started happening this week. All other websites are ok.

    You're welcome

  • I have some windows minimized. When I try to open up another window from the start menu, even the minimized windows open up.

    When I first open up a window from the start menu, just one window opens up. But when others are at the bottom (minimized) and I go to open up a new window from the start menu, all the minimized windows open up, too.

    That can a problem with the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    See:
    * [[Troubleshooting extensions and themes]]

  • How do you make photoshop be the default program to open image files from bridge?

    I just installed CS5.5 and tried to open some pictures but it keeps opening in Windows live photo gallery. I don't even see opening in photoshop as an option when I right click and scroll down to "open with" (for jpeg images). I never had this issue with CS3, bridge just automatically opened files in photoshop.
    Thanks!

    I found a similar thread that might help. Let me know if it works: http://forums.adobe.com/thread/423584?tstart=0

  • Opening an image file from DOS console

    I want to open an image from a program running in DOS console.
    I've tried FileChooser and FileDialog, I select the file but it is never opened.
    Is doing this possible?
    What should I use?
    thanks.

    The ImageIcon class can get an image from a URL and you can create a JLabel that uses the ImageIcon.
    Or, you can use Toolkit.getDefaultToolkit().createImage(file_name) to create an Image and use that Image to create an ImageIcon.
    Or you can create an Image (using either method above) and use it with a Canvas (or panel) and drawImage() using the Graphics in the paint() method.

Maybe you are looking for