When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up.  What gives?

When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up.   Do I need this software?  Can I just download the pictures to my Mac without using the Canon software?

When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up
You need to contact Canon - or read the software specs - it sounds like the software you got form them is not supported by your computer
Do I need this software?
Probably not - exactly what about it do you want?
Can I just download the pictures to my Mac without using the Canon software?
Probably - if you are shooting JPEG - launch iPhoto and in the iPhoto preferences set action when a camera is connected to launch iPhoto and connect your camera - iPhoto should launch and you should be able to import
Some cameras need to be set to mass storage mode - read your camera manual for details and procedures
If you are using RAW then your camera needs to be on this list and you need the versions of software noted - http://support.apple.com/kb/HT4757 - for older OS versions you can use google to find the list of supported cameras
LN

Similar Messages

  • Installing EOS Digital Solution Disk Ver 25.2

    Trying to install EOS digital solution Ver 25.2 to PC. At very start, options are "ASIA" or "OCEANIA". But I am Europe? Should I put in Asia and continue? Or have I been supplied with a wrong Disk?

    When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up
    You need to contact Canon - or read the software specs - it sounds like the software you got form them is not supported by your computer
    Do I need this software?
    Probably not - exactly what about it do you want?
    Can I just download the pictures to my Mac without using the Canon software?
    Probably - if you are shooting JPEG - launch iPhoto and in the iPhoto preferences set action when a camera is connected to launch iPhoto and connect your camera - iPhoto should launch and you should be able to import
    Some cameras need to be set to mass storage mode - read your camera manual for details and procedures
    If you are using RAW then your camera needs to be on this list and you need the versions of software noted - http://support.apple.com/kb/HT4757 - for older OS versions you can use google to find the list of supported cameras
    LN

  • After installing eos digital solutions disk ver 24.1,get error message (see Below)

    I am installing in win7 /64 and can't run any of the programs on the eos digital solutions disk ver 24.1.  I have tried different resolutions on my monitor including 1024x768 but end up with the same message.,I get an error message as follows:  " this software doesn support screen res. lower than 1024x768" but my res is set higher!!  
    could someone please help?
    Solved!
    Go to Solution.

    maxebaldwin wrote:
    I am installing in win7 /64 and can't run any of the programs on the eos digital solutions disk ver 24.1.  I have tried different resolutions on my monitor including 1024x768 but end up with the same message.,I get an error message as follows:  " this software doesn support screen res. lower than 1024x768" but my res is set higher!!  
    could someone please help?
    Solution disk 24.1 is pretty old; you should install the latest updaters from the Canon site before trying again.
    That said, the problem may not be in the Canon software at all, but in the driver for your monitor. If the driver is sufficiently primitive, the Canon software may not be able to tell what resolution your monitor is capable of. Try to find and install the manufacturer's latest driver.
    Bob
    Boston, Massachusetts USA

  • EOS Digital Solution Disk

    if I don't have a CD-ROM on my laptop, how do I install the Canon EOS Digital Solution Disk?

    Go Here:
    http://www.usa.canon.com/cusa/support/consumer/eos_slr_camera_systems/eos_digital_slr_cameras
    Enter your camera model, and then go to Drivers and Software.

  • I purchased a book from Kobo online and when I try to open it Adobe Digital Editor

    I purchased a book from Kobo online and when I try to open it Adobe Digital Editor says it needs to be authorized by a Vendor ID.  when I go to my ADE account it says a Vendor ID has already been created.  How do I get to access my book (which I have already purchased twice!).  Thanks.

    Why not use the Kobo reader, Kobo app, or Kobo program as needed?
    Read Anytime, Anywhere with Free Kobo eReading Apps

  • I have an Apple 10.5.8 and just purchased a Canon MX726 printer to use with my computer but I get a message saying the software is not supported.  My computer skills are fairly modest; is an attempt to make this printer work with this computer doomed?

    I have an Apple using Mac OS X10.5.8 and just purchased a Canon MX726 printer to use with my computer but I get a message saying the software is not supported.  My computer skills are fairly modest; is an attempt to make this printer work with this computer doomed?

    10.8 if you must, but on the link above...
    Canon PIXMA MX726 drivers for OS X 10.6/10.7/10.8/10.9
    MX720 series Scanner Driver Ver. 19.1.0 OS X 10.6/10.7/10.8/10.9
    26.75 MB
    Download
    ICA Driver Ver. 3.1.0 (OS X 10.6/10.7/10.8/10.9)
    3.44 MB
    Download
    Quick Menu Ver. 2.2.0
    2.31 MB
    Download
    Canon IJ Network Tool Ver. 4.2.0 for Intel Mac (OS X 10.5/10.6/10.7/10.8/10.9)
    4.38 MB
    Download
    My Image Garden Ver. 2.0.1
    290.88 MB
    Download
    Easy-PhotoPrint EX Ver. 4.5.0 (OS X 10.7/10.8/10.9)
    102.19 MB
    Download
    MX720 series CUPS Printer Driver Ver. 10.84.1.0 (OS X 10.7/10.8/10.9)
    13.76 MB
    Download
    Speed Dial Utility Ver. 1.3.0 (OS X 10.6/10.7/10.8/10.9)

  • HT201342 I have just opened an icloud email address and am unable to open ANY of the messages in my INBOX. I keep getting the message, "Cannot open this item. This operation is not supported until the entire message is downloaded. Download the message and

    I have just opened a new icloud email address and am unable to open ANY of the messages in my INBOX. For each item I get the message "Cannot open this item. This operation is NOT supported until the entire message is downloaded. Download the message and try again". I now have no clue what I need to do to open these items. Help please.

    What version of iPhoto do you have installed?  Is if one of the versions shown as not compatible in this screenshot?
    If it is then go to the App Store and download iPhoto 9.5.  It will be free if you have an iPhoto 9 or later verson currently.
    OT

  • Before upgrading my system from Snow Leopard to Mountain Lion I had taken a backup of iPhoto in my external drive. But now when I try to open that package, I'm directed to app store to buy new iPhoto. How can I retrieve my photos without buying iPhoto?

    Before upgrading my system from Snow Leopard to Mountain Lion I had taken a backup of iPhoto library in my external drive. But now when I try to open that package, I'm directed to app store to buy new iPhoto. Why would apple install iPhoto by default with Snow Leapord and make us import all our photos in it at the first place, and now ask for money if we want to retrieve our photos back on mountain lion? What if they make contacts a paid app with the next OS upgrade, and then bully us to pay money if we want our contacts? This is something very dissappointing on Apple's part. I need answers here.

    I fail to remember if the installer gave me an option to keep my applications.
    The Mountain Lion installer will not delete applications. It will only mark applications, that are not compatible with your current system with a "forbidden" sign in the icon. And you cannot launch them.
    Does your iPhoto icon in the Applications folder look like this?
    Then your iPhoto version is incompatible and cannot run with Mt. Lion. If it is iPhoto '11, with a versionnumber starting with 9.x.x., you can upgrade it by downloading a newer version from the Apple downloads site  http://support.apple.com/kb/DL1650.
    But if you have 8.x.x, you need to buy an upgrade.
    Regards
    Léonie

  • Problem viewing forms.This form is not supported with the current version of Adobe Reader.Upgrade to the latest version for full support. That does that mean exactly?

    Problem viewing forms.This form is not supported with the current version of Adobe Reader.
    Upgrade to the latest version for full support.
    What exactly do I need to do?

    That means you were probably using Adobe Acrobat to view PDF's. Acrobat is totally unnessary, you can view PDF's in Preview (Applications - Preview).
    BTW PLEASE complete your profile. It's very difficult to help  someone when they don't provide any information about their system. You can easily do this by clicking Your Stuff in the upper right of this page, then click Profile and fill in the pertinent information.

  • HT5219 My Macbook Air (Late 2010) Will not let me install Thunderbolt to Gigabit Ethernet adapter software. It says "This software is not supported on your system." What can I do to stop this and install the adapter software?

    Help me

    "This software is not supported on YOUR SYSTEM" seems to be a recurring theme in Apple Support site offerings for MacBook Pros and I suspect that Apple didn't really work this issue thoroughly enough to make their hardware updates viable.
      You are not alone, Raigbow.  Many MacBook Pro users are finding the Apple Support update packages are not doing what their support instructions indicate should be happening.
      I believe this is a bigger issue of Apple not thinking of previously sold units as worthy of solid support.  After the one year warranty, unless you buy more warranty - and I have - the half-hearted but very thorough documentation of non-working "fixes" shows they aren't all that concerned with your happiness as a user.... Only as a potential buyer of the next Apple showcase item. 
      After that, they will be on to the next big thing.  Kind of like the Japanese model, in which old things are discarded. 
    But save your work, your data, as the only fix the manufacturer will offer is to wipe your drive and reinstall the original software. 
    Or use the iCloud to save everything you do and value, since the device you use to access it is short-term.. Don't get too attached to your MAC, because it is terminal in nature.

  • HT4644 I'm experiencing a similar problem with an LG Flatron monitor which my MBP no longer recognizes  I've tried installing the updates listed above but have not been succesful. Everytime I get a message saying that this software is not supported on my

    I'm experiencing a similar problem with an LG Flatron monitor which my MBP no longer recognizes.  I've tried installing all the updates listed above but have not been succesful. Everytime I get a message saying that this software is not supported on my system. Can anyone tell me why I can't install the updates?

    Hello Philly,
    I believe that when you reset your ipod(command given from the computer, right?)  touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
    I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
    ~Remember, I am just giving an educated guess on limited information

  • Error message: this computer is not supported by the system recovery media.

    I replaced a bad samasung hard drive in my Pavilion dv6z 3200 with a Seagate Momentus XT 750 GB 7200RPM SATA 6Gb/s 32 MB Cache 2.5 Inch Solid State Hybrid Drive ST750LX003 and when trying to restore Windows 7 64 bit OS get the error message "this computer is not supported by the system recovery media"

    Is the new hdd at least as large a capacity as the original? Can be larger capacity, but sometimes smaller will cause error.
    Enter BIOS by tapping F10 key. Is all system info intact/complete?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • My computer is authorized, but when I try to open a recently downloaded audio file I get asked for my "Audible username and password"  and my AppleID and password do not work

    My computer is authorized, but when I try to open a recently downloaded audio file I get asked for my "Audible username and password"  and my AppleID and password do not work.

    thats because audible isnt apple provided, its a third party app/website so you'll have to get it from them

  • Can't install Canon EOS Digital Solution disk

    Hi,
    Have got a problem installing 'EOS digital solution disk' which came with my Canon EOS 400D digital SLR camera. Here is a description of what happens:
    I click on 'CANON EOS Digital Installer' icon as instructed. First something called 'MasterInstaller' launches, and I select 'Europe' then 'UK' when prompted. The main menu appears again and I select 'Install', then 'Next' then 'Easy Install'.
    I 'Agree' the terms, then hit 'Next' in Starting Installation window.
    At this point, 'Installer' launches and a window appears with the text "Preparing to install ImageBrowser" (with a blue striped barber pole type line beneath) but nothing happens. The blue stripes do not 'move' as is normally the case when something is working. It just locks up, and usually the Mac beachball of death will spin. I've tried leaving it ages to sort itself out, but nothing changes.
    When I go into the 'Force Quit' option from the pull down menu in Finder, (as everything is stuck) the 'Installer' and 'MasterInstaller' are usually highlighted in red, I guess meaning they've either crashed or got lost. Sometimes the Finder joins in too (being highlighted in red).
    I'm not running any other applications, and I've tried doing a Custom Install, (instead of 'Easy') and choosing only 1 application at a time, and disconnected my external drive but to no avail.
    I tried emailing Canon, but they have just suggested I try loading it onto another Mac but I don't have one or access to one either.
    Some help would be appreciated.
    P.S. Gave disk to my partner to try on his PC and he said it loaded ok, so I assume it's not a faulty disk.

    So it still said Keys out of order ? That is a pretty serious error that Disk Utility rarely is able to repair. I would run it again and report to us exactly what is reported when you attempt a repair (not verify) please.
    Hi Dale,
    Well, the plot thickens....
    I kept running the DU repair (about 5 or 6 times), and interestingly enough kept getting EXACTLY the same message:
    Checking HFS Plus volume
    Checking Extents Overflow file
    Checking Catalog file
    Keys out of order
    Rebuilding Catalog B-tree
    Repair completed
    No details or other messages about what the specific problem was. (Is there a way to find out?)
    Well, I took another look on the link you posted and ran an 'fsck'. (I still have no idea what that means but it sounded as if it may throw up some info.) Indeed it did and here's what appeared after I typed '/sbin/fsck -fy':
    ** /dev/rdiskOs9
    ** Root file system
    ** Checking HFS Plus volume
    ** Checking Extents Overflow file
    ** Checking Catalog file
    diskOs9: 0x8 (UNDEFINED)
    Keys out of order
    (4, 1886)
    ** Rebuilding Catalog B-tree
    diskOs9: 0x8 (UNDEFINED)
    ** The volume Mac Hard Disk could not be repaired.
    sh-2.05a#
    (Hopefully there aren't any typos, I just typed this in myself, having written down the info on paper.)
    Obviously the DU knows there's a problem, but simply thinks it's fixing it every time I run a repair. A bit like Groundhog Day I guess....
    Now what??
    Cath

  • HT1237 My MacBookPro9,2 gets error message: "This software is not supported on your system." Audio jack is ignored. What else can I do?

    MACBOOK Pro 13-inch Mid 2012
    2.9GHz Intel Core i7
    8GB 1600 MHz DDR3
    Intel HD Graphics 40000 512 MB
    Mac OS X Lion 10..5 (11G63)
    Model Identifier:                    MacBookPro9,2
    Boot ROM Version:          MBP91.00D3.B08
    SMC Version (system):          2.2f44
    Passed Last Power on Self-Test
    The MacBook EFI Updater File that I downloaded from the Apple website for Support:
    http://support.apple.com/kb/HT1237
      --> shows my Model McBookPro 9,2 as needing
    EFI Boot ROM version MBP91.00D3.B08 (EFI 2.9) (http://support.apple.com/kb/DL1593)
    SMC version 2.2f44 (SMC 1.8) (http://support.apple.com/kb/DL1633)
    I downloaded and tried to run both the files
    MacBookProEFIUpdate2.9.dmg 9/19/12
    AND
    MacBookProSMCUpdate.pkg
    as offered on this matrix, which instructs:
    "This article lists firmware updates that were released for Intel-based Macs. They update the firmware that originally shipped from the factory. If your computer does not appear on this list, an update from the factory firmware is not necessary.
    If you are unsure whether your computer needs a particular update, simply download and open the update installer. The installer will alert you if the firmware update is already installed or not needed."
    and instead of a message telling me of the proper update
    "This software is not supported on your system."
    So, why would the manual updater not tell me I already have the proper SMC and EFI updates?
    What is the reason I get the message that the software I downloaded from Apple Support is not supported on my system?
    Is this indicative of a larger problem with my MACBOOK PRO? 

    [email protected],
    why were you trying to reïnstall the Boot ROM and SMC versions that were already installed on your MacBook Pro?
    I agree that  a “not supported” message is certainly less clear than an “already installed” message would have been.

Maybe you are looking for

  • Reverse Telecine error

    Does any one know what an "Error-43" means in the reverse telecine log? I am not able to batch reverse or single clip reverse any of my clips. The process stops 3/4 of the way through, I have tried many different clips and settings but keep getting e

  • Error applying 11.2.0.1 OLAP B Patch (#10130392)

    Hi When I try to apply the 11.2.0.1 OLAP B Patch (#10130392) i get an error Following is the trace of the output Invoking OPatch 11.1.0.6.6 Oracle Interim Patch Installer version 11.1.0.6.6 Copyright (c) 2009, Oracle Corporation. All rights reserved.

  • [SOLVED]ps not found, and path is ok have I a rootkit?

    Hi! Often use ps aux, but yesterday remanded me ps not found, I've been looking and I have found that saying that goes some thinking of reformatting or others others who if use much  the ps happens. shocked!?!? No joke, This is in stack overflow,  sa

  • Kuler Air app & Mac Widget are no longer supported

    Adobe will no longer be updating or supporting Adobe Kuler desktop (Air) or the Kuler Mac widget.  If you have this app installed on your computer, you can continue to use it, but, we will no longer be providing bug fixes, updates, or making them ava

  • New Acrobat 3D Version 8 Update

    The Adobe® Acrobat® 3D Version 8 update contains several updated dynamic link libraries (DLLs) that provide support for more recent versions of CAD file formats when using Acrobat 3D Version 8 and Acrobat 3D Toolkit Version 8. It also fixes a number