When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

FingerPrint is not listed as supported on this page: AirPrint Basics
You might check with the makers of FingerPrint.

Similar Messages

  • Text font size changed automatically from normal to huge

    What could cause the font size to go from normal to huge?

    Thanks for the note.  I gave up on the Verizon site (there was no place to go to get one of those FAQ answered) and went to Bing and asked the question, hit the return key and found the answer in the first search topic that came up.  It did give me the answer of increase or decrease font size using the volume keys on the side of the phone.  Now you can disable that particular function so you don't accidentally increase the font size.  Thanks again.

  • Auto numbering changes when the font size changes

    Help.
    I get files made in InDesign CS4 that have paragraph styles assigned to create numbered lists within the body. They are fine as they are when they are opened.
    When I make changes they often- not always- change to 'continue from previous number' instead of staying 'start at 1'. The changes I have make are to change the document size, the font size and the margins.
    Is there something I am doing that allows them to change, or is there something that I can do to keep them from changing?

    Hi,
    Your doubt is not yet clear.
    I think u have not used smartstyles just changed the Font.
    To Test it if data is not coming from driver program,then just excute the smartform-(Press F8) .
    The Print Page will be seen to you.
    Accordingly you can undrstand whether it is decreased or not.
    Affable,
    Arbind

  • Why does the font size change unexpectedly when I use the touchpad with my new HP laptop with Windows 8?

    Frequently the font size will change when the touchpad is touched. This is annoying! Is there a setting adjustment I can make to keep this from happening?

    This is very experimental, but since no one else has replied...
    I'm not sure which computers are affected, but Firefox has some support for touchpad "gestures" on multi-touch touchpads. Most of the ones that affect the zoom level of the page are the "pinching" gestures, like a smartphone screen. However, it seems that by default a "tap" will reset the zoom level, and that might be the problem here.
    Could you try this?
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''gest''' and pause while the list is filtered
    (3) Double-click '''browser.gesture.tap''' and change it to... I'm not sure whether there is a command for "do nothing" but you could try typing or pasting in '''cmd_selectNone''' which cancels the current text selection in the page (if any).

  • When I try to type in pop-up window while using webbased templates, the cursor moves to the location/address bar

    I use web-based templates for formulating replies to email queries of customers. When I click on a template, pop-up windows open for entering all non-general/specific details in the template. With the installation of the new version of Firefox, what happens is that when I try to type in the pop-up window, the cursor automatically moves to the address/location bar ! This was not the case with the old firefox. How do I prevent my cursor to move automatically to the address bar ?

    Hi jaideepdesai,
    Do you have the accessibility type in page option turned on?
    I think it is [http://kb.mozillazine.org/Inline_autocomplete]
    I it is definitely one of these: browser. urlbar.
    See [http://kb.mozillazine.org/Firefox_:_FAQs_:_About:config_Entries About:config entries]
    By default a new window should open the cursor in the search field on the page. Resetting Firefox will get you back to the default on about:support page.

  • In WebHelp, when I mouse over a link, the font size changes.

    Either after I generate to WebHelp or View in RoboHelp, when I mouse over a hyperlink text, the font changes from large to small text. My step is a 11pt font, my body text is 10pt. It appears the 11 pt. font switches to 10pt font when I mouse over it. Any way to fix this?
    Also noticed that when I have a note at 9 pt, and mouse over a link, the text changes to 10pt.
    So now it appears in most of my topics with links within a step or note. In a body, the text appears fine (or stays the same) when you mouse over a link.

    Not believing that either.
    You should be able to edit your CSS in a text editor. If you are not sure what to do, set up a simple project using your CSS. Any text will do and create a link.
    See the Contact page on my site and follow the instructions there.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • When I try to print, I get one page with a header and the background image, another page with the content, and a third page with a footer and background image. How can I make it print properly?

    Also, if I print to a .pdf, the background does not show up even if I have the checkbox checked to print background image.
    The site I'm trying to print is:
    [http://www.puertovallartatours.net/coupons-discounts.htm http://www.puertovallartatours.net/coupons-discounts.htm]

    I did not have the HP printer software for Mac OSX installed properly. Once installed the problem went away.

  • When I try to print an Email item only he left half of the page prints. This is all that shows in Preview also.

    I use a MacBook. Someone in the family recently used my computer and they may have made a change of which I am not aware.'''bold text'''

    Problems like that with Firefox printing look like they are fixed in Firefox 4.

  • I have a small Spreadsheet created in xls format dependent on the use off url hyperlinks, when i send by email to Numbers on my ipad 2 I loose the ability to hyperlink what am I doing wrong

    I have a Small spreadsheet Created in XLS Format on my home PC when I email to my Ipad 2 and open in Numbers I loose the Hyperlinks
    what am I doing wrong, I also need to be able to generate and edit  hyperlinks on the I Pad as I maynot have a PC availiable

    This forum is dedicated to Numbers on Mac OS X.  So there maybe some people who have Numbers on an iOS device here but they seem to less active.  There is a forum for Numbers on iOS you can post in.
    The iWork on iOS forum is here:
    https://discussions.apple.com/community/app_store/iwork_for_ios
    I personally do not have iWork on any iOS device but can still ask questions that may help.
    1) are the cells with URLs completely empty after opening in iWork on the iOS device?
    2) can you show what the spreadsheet on the PC looks like?  specifically regarding the URLs?

  • When  i try to access my email on my ipad using safari i cant get thru

    i have an ipad 2. when i go to a home page using safari, i can not click a link and go to the next page it only partial loads

    if its hot mail its desined not to word "windows" but if you download the app it will work

  • Why does Photoshop CS5 cease working when I try to print a file on my Canon Lasershot LBP7200?

    I am using Photoshop CS5 extended with the latest upgrade 12.0.4.0 installed. My OS is Windows 7 with the latest updates installed. I have a Canon Lasershot LBP7200 Cdn printer installed as a network printer. When I try to print, e.g., a jpeg file using the print command I get an error message that says Photoshop has stopped working and will be shut down. This did not happen before i started installing the updates for Photoshop -- the print commmand in v. 12.0 worked OK. I have tried uninstalling and reinstalling both the printer and Photoshop but this makes no difference - the file will still not print in v. 12.0.4.0 and the application crashes.
    Here is the error message in the application log:
    Faulting application name: Photoshop.exe, version: 12.0.4.0, time stamp: 0x4d9d8cbc
    Faulting module name: CNAP2SMK.DLL, version: 4.4.5.2, time stamp: 0x48bf6e6d
    Exception code: 0xc000000d
    Fault offset: 0x0000df3a
    Faulting process id: 0x1e00
    Faulting application start time: 0x01cc2a70dc9c1900
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS5\Photoshop.exe
    Faulting module path: C:\Windows\system32\spool\DRIVERS\W32X86\3\CNAP2SMK.DLL
    Report Id: 58ca671c-9664-11e0-a05a-00271337ef93
    Here is the Windows error reporting message - no response from Microsoft to the error report:
    Fault bucket , type 0
    Event Name: BEX
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: Photoshop.exe
    P2: 12.0.4.0
    P3: 4d9d8cbc
    P4: CNAP2SMK.DLL
    P5: 4.4.5.2
    P6: 48bf6e6d
    P7: 0000df3a
    P8: c000000d
    P9: 00000000
    P10:
    Can anyone help me resolve this annoying situation please?
    Hibiscus08

    I thought of something you can try...  Not a very great chance of success, but not too difficult to implement (if a bit geeky)...
    Just in case this might be because of recent security changes Adobe has made regarding loading DLLs, it might be interesting to try putting the name of the folder containing the Canon DLLs into your system's PATH.
    1.  You'll need to figure out in what folder CNAP2SMK.DLL resides.  That's not trivial, as Windows normally avoids searching in System folders by default.  Possibly the most reliable way is to start a CMD window As Administrator then type in the following command:
    DIR C:\CNAP2SMK.DLL /S
    2.  The above command may take a long time to run.  Assuming it finally does yield a folder name containing the DLL file and its cousins as installed by the Canon print driver installer, click Start, then right-click Computer, then choose Properties.  Then click Advanced system settings.
    3.  In the System Properties dialog, click the [Environment Variables...] button.
    4.  In the User variables section at the top, you may already have a PATH variable defined.  If so, double-click it.  If not, click the [New...] button and add the PATH variable.  If it already existed, add a semicolon (;) then the folder name you got from step 1.  If the variable is new, just add the folder name.
    5.  OK out, then log off and back onto Windows.
    6.  Do a test print.
    7.  If it doesn't help, you can go through the same steps to remove the folder from the PATH.
    -Noel

  • I photo crashes when I try to print

    I upgraded to Leopard and installed iLife 08.
    When I try to print photos and click customize so I can choose paper type, size, etc- the app crashes!
    The print dialog box looks slightly different from my old version of i photo-but now I can't choose the size, glossy paper or anything.
    I am still using my same printer Epson RX500
    I can choose these options using Microsoft Word- so it seems like an iPhoto issue.
    Help!

    Delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder and try again.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Firefox 28 hangs when I try to print to Acrobat PDF printer

    Hello all!
    I have observed a problem when I try to print a webpage in Firefox v28 using the Acrobat PDF Printer (Acrobat Pro 9.5.5) installed in a Virtual Machine (VMware View 5.2) with Windows 7 64 bits. The printing dialog hangs (no response) after the "Save as" pdf dialog. Then I have to force Firefox to close, and afterward a Acrobat PDF conversion dialogs appears with the progress bar stopped at the middle. I also have to close this afterwards.
    The others programs (Office, IE, Notepad...) are able to print through the PDF printer without problems. The problem appeared after the automatic update to Firefox v28, since when I downgrade to Firefox v26 the problem disappears.
    I checked a similar configuration in a physical computer (W7 64 bits, Acrobat Pro 9.5.5, Firefox v28), and everything runs good, so I think it is a change that happened in Firefox v28 that has some problem with the VM configuration. I also have tried to change the Firefox profile, reset Firefox and reset the printing settings and reinstall Acrobat. No luck.
    I would like to know if somebody know some change in Firefox v28 related with the printing or related to some service or update that can have some problem in the virtual machine.
    Any help is welcome!
    Thanks!

    When you updated, did you reset the printer settings in '''about:config''' under '''print.print_printer'''?

  • Running Mavericks, when I try to print on my  HP LaserJet 1320tn I get the message  "Printing - The printer is in use." and nothing happens. Worked fine with Mountain Lion.

    I'm running Mavericks and when I try to print on my networked HP LaserJet 1320tn I get the message  "Printing - The printer is in use." and nothing happens. The same set up works fine's with Mountain Lion. I am uptodate. Any thoughts?

    Hi,
    Thanks, but these suggestions aren't helping.
    I have
    1. tried to print form a different add
    2. deleted and reinstaled the printer
    3. deleted and reinstall the printer drivers
    4. reset the printing system
    there's no problem with the printer or the wireless as (1) i can print using my partner's mac with mountian lion and (2) I can see the printer on my own mac (mavericks)
    Any more suggestions?
    Thanks
    Laurie

  • Changing the font size when sending email out from the iPad with MobileMe

    Is there a way from the iPad, or from my MacBook to the iPad, that I can increase the size of the font when typing outgoing mail? I use MobileMe on both my iPad and MacBook. My sister has cataracts and she needs the type size larger than what is already set on the iPad outgoing mail. I can make the type size larger for my incoming mail - I guess I did it through iPad settings -but I can't seem to figure out how to make it larger for my outgoing mail. I would prefer to be able to answer her on my iPad than having to switch back to my Mac each time she writes. Thank you.

    I guess what I am looking for is a toolbar when I am sending email so that I can change the font size, change the typeface, make words bold, underline them
    I don't think you will find any app that does that, it's the kind of feature only Apple can add. You can tell them here:
    http://www.apple.com/feedback/ipad.html

Maybe you are looking for

  • CS5 and Flash Pro CS5.5 fail to install on OSX 10.7

    I have Lion OS X at an intel core 2 duo macbook air. When I had Snow Leopard, I have installed Adobe CS5 sucessfully, and then removed it because of storage issues. Now I can't install neither CS5, nor Flash CS 5.5. The first one is the dvd image of

  • Already bound: 8080

    Hi, I am new to JBI and tried a composite application after going through sample codes. I created 4 independent projects: 2 web applications (web services), 1 BPEL module and 1 composite application. Both web services expose some web methods. I have

  • Behaviour of "Party Submenu HD" buttons

    I used the prefab party menu and its prefab submenu of EncoreCS4.. The buttens of the submenu are filled with the first frame of the related movie in the timeline. However most of my movies start with a crossfade from black. Consequently all my butto

  • Re-buying previously purchased music (new computer)

    Hi guys, I just installed iTunes on a new laptop. I haven't had an ipod for a couple of years, but naturally the old itunes account is still there. I can't find the music I bought back then (which makes sense) but I also don't seem able to re-buy the

  • Mac suddenly won't open some websites, only on safe mode

    Hi I need some help     Mac  stop showing  some websites  in my particular case  (www.globo.com) . I'm trying for almost  5 days and nothing. Just today by morning  the website enters but for few moments after the connections with thw websites don't