When I try to sync my iPod iCal with my MBP iCal via WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete"

When I try to sync my iPod iCal with my MBP (OS 10.7) iCal via iTunes and WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete because the downloading never completes because I am not connected to the internet.
Why does syncing iCal need Safari Safe Browsing Data? How can I turn this off?

See:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
"Safari Downloading Safe Browsing Data" is just some data that is synce with the computer. To turn off on the Mac go to System Preferencs>iCloud and turn off Safari

Similar Messages

We have stopped getting any software updates, and now we can't sync our new iPad with iTunes, b/c it won't update. It says it's up to date, but it's still on a 10 version.

Our computer won't update. We can't hook up a new printer, or hook up any new i-devices, b/c the software updates are not working.

Backup just your users files off the machine before doing anything and unmount and disconnect the drive.
Upgrade to Snow Leopard and run the Software update until clear
Provided your machine is working good, Snow Leopard is a darn good upgrade for a 10.5 box. Especially if it's freshly installed.
Do not upgrade that older machine to OS X 10.7 or later (or to Mavericks 10.9) it's too out of date (old), it will be slow and your PPC based software will no longer work. (will under Snow Leopard/Rosetta)
Currently 10.6.8 is fine with your iOS devices and geting security updates, we still have 25% OS X market share still, but eventually a new machine is likely in order for you soon.
I advise breaking in a new Mavericks 10.9 machine, avoid upgrading that older one past 10.7, use it for backup or sell it.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still

When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https:

Question
When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https: Is there a solution?

Try some basic troubleshooting.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

I lost a lot of tracks while syncing my ipod touch with iTunes. I have managed to get some of them back with a free download, but iTunes will not let me dowload whole albums which I have paid for. It does recognise that they have been purchased. What do n

As I've already said to get this far: I have lost a lot of tracks while syncing my iPod Touch with iTunes. I have managed to get free downloads of some of the single tracks, but when I try to download entire albums the system informs me that I have already purchased them and a pop-up window informs me I can get them back from my "Purchased" file. I would not be trying to dowload them again if they were anywhere on the iPod, would I? The other problem seems to be that with single tracks I don't know before I hit the purchase button if I have picked it from the right album and I have had to pay for it again.
I feel that I have been totally ripped off by iTunes and, apart from ranting on this forum, I don't seem to be able to let my feelings known. It's like a guy from my local record store coming round and nicking my albums and telling me that it's tough!
The point here is folks, that it was syncing two Apple sites which caused the loss of these tracks and from what I've read elsewhere this is a regular fault. And please don't tell me that it's my fault for having a pc. Apple shouldn't sell a product for pc, when it doesn't work on pc!

- Are you saying that they are not listed in your Purchased section?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Are they listed in your Puchases history when you log into your account on your computer?
- Are they still available now for purchase? If not then you are out of luck
If they are still available and listed in your Puchase History then contact iTunes
http://www.apple.com/support/itunes/

I updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks

i updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks

To show the battery percentage used go to settings
from there click general scroll to usage and select
scroll to bottom of page for battery usage select on.
This will show the icon battery and the percent numbers on the top right.
When phone is connected to an outlet sometimes it does not always show complete charge. I do not understand why but it is what it is.
FYI I sent reply to you not to deggie. You can have your own satisfaction to reply direct.

HT201210 Facing a problem while setting MAC 6.1. My version is 5.1. The activation does not complete.

Facing a problem while setting MAC 6.1. My version is 5.1. The activation does not complete.

Hacked or jailbroken iPhone will have this problem.
BTW, it's IOS 6.0.1 not MAC.

Hi, my itunes will not work. I get a message saying it is out of date. But I have uninstalled and reinstalled itunes and I get the same message?

hi, my itunes will not work. I get a message saying it is out of date. But I have uninstalled and reinstalled itunes and I get the same message?

When uninstalling iTunes on your windows computer, there is a specific way it must be done in order to completely uninstall all components of the software. Ensure you follow the article for your correct OS.
Did you do this when uninstalling??
Windows XP - http://support.apple.com/kb/HT1925.
Windows Vista or Windows 7 - http://support.apple.com/kb/HT1923.

Why is my iPad suddenly not opening the Yahoo home page? I get a message saying Safari can not open the page due to too many redirects. This started yesterday. I shut my iPad down and still no luck.

Why is my iPad suddenly not opening the Yahoo home page? I get a message saying Safari can not open the page due to too many redirects. This started yesterday, and I have already tried shutting off my iPad.

When I try to open an image by double clicking on it in Bridge, I get a message telling me to log in to Creative Cloud. I am running CS6, and the default should be to open files in Photoshop 6 or in Adobe Raw (if it's a Raw file). I don't want to log in

When I try to open an image by double clicking on it in Bridge, I get a message telling me to log in to Creative Cloud. I am running CS6, and the default should be to open files in Photoshop 6 or in Adobe Raw (if it's a Raw file). I don't want to log into CC since I am not a subscriber, and this means that I have to work around, and go back to Bridge, and tell it to open the file in Adobe RAW. However, this does not work for older psd files which for some reason cannot be opened in RAW. How do I return to the process of simply allowing RAW files to open automatically in Adobe RAW, and simply right clicking on the image in Bridge to bring up the option of opening it in Photoshop?

<moved from Adobe Creative Cloud to Bridge General Discussion>

When i try to connect my new ipad to my home wifi i get a message saying unable to join the network BTHub and my only option is to dismiss

when i try to connect my new ipad to my home wifi i get a message saying unable to join the network BTHub and my only option is to dismiss

If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. Contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
See also here: http://www.apple.com/support/ipad/wifi/

I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?

I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?

Hi,
PSC 1315 no longer supported for scanning since Mac OS X v10.5 or while using any newer OS, there is no scan software provided by either HP or Apple (Image Capture)
You may find this information stated below for Leopard, the same apply for any newer OS version:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01234231&cc=us&dlc=en&lc=en &os=219&product=374568&sw_lang=
Image capture will not recognize your device as well, only print is supported as you may find listed for teh PSC 1310 Series below:
http://support.apple.com/kb/HT3669#HP
Although there is no official scanning support for your device you may still try the 3rd party VueScan software which list your scanner as supported and compatible with Mountain Lion:
http://www.hamrick.com/vuescan/hp_psc_1310.html
Shlomi

I can not connect to the internet while using my ipad I get a message saying Safari could not open the page because the server stopped responding need help thank you

I CAN NOT CONNECT TO THE INTERNET WHILE USING MY IPAD I KEEP GETTING A MESSAGE SAYING SAFARI COULD NOT OPEN THE PAGE BECAUSE THE SERVER STOPPED RESPONDING PLEASE HELP THANK YOU

Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

When I try to share a Numbers spreadsheet with other Mac users, (via iMessages) it doesn't open on Numbers app but instead on Numbers for iCloud beta, on their browser.

When I try to share a Numbers spreadsheet with other Mac users, (via iMessages) it doesn't open on Numbers app but instead on Numbers for iCloud beta, on their browser. and worse all the letters appear out of format and unreadable.
Is there any option that i'm getting wrong
How can we solve this.
Usualy we use Google drive documents to share some spreadsheets, but we wanted to share the same document with numbers (that's much better) but it doesn't work as easily as in google drive and doesn't even remotely works how it was supposed.

When I try to share a Numbers spreadsheet with other Mac users, (via iMessages) it doesn't open on Numbers app but instead on Numbers for iCloud beta, on their browser. and worse all the letters appear out of format and unreadable.
Don't know why those letters wouldn't display properly; maybe something to do with their settings at Safari > Preferences > Advanced > Default Encoding or similar setting in whatever browser they are using. But it's really easy for them to download the document via the "wrench" in the Numbers for iCloud menu. Then they can open it in the Numbers app.
For "real-time" collaboration, I think you all need to be accessing Numbers for iCloud via the browser.
SG

I downloaded an album recently, but I guess my internet was going in and out the whole time, and now 5 of the 14 songs will cut out after a few seconds. How can I re-download those few songs?

I downloaded an album recently, but I guess my internet was going in and out the whole time, and now 5 of the 14 songs will cut out after a few seconds. How can I re-download those few songs?

Welcome to the Apple Community.
Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

After using my browser (any of them) for a period of time I get a message saying that a page can't be opened. I have to reboot again. Clearing the cache doesn't help.

After using my browser (any of them) for a period of time I get a message saying that a page can't be opened. I have to reboot again. Clearing the cache doesn't help. It's very annoying. It even happened in the middle of a chat with Apple online support. I'd be very grateful for help!

Several things come to mind ... when you say your wife uses the same system with a different login and doesn't have issues, that suggests looking at your login items. Go to System Preferences (on your dock or on your hard drive in Applications), accounts, and on your account look at login items. Anything there that shouldn't be or isn't used? If you don't know, create a new account for yourself with no login items, and see if you still have the issue.
Next, I would run OnyX, which is a free disk maintenance program. You can download it from http://www.titanium.free.fr/download.php . Do the tasks on the cleaning and maintenance tabs. Before using any disk maintenance software, you should have a system backup. I periodically run it, and others have found that it can help with performance.
You might look at how you're system is using memory. You should have enough but it's easy to check. Bring up the Activity Monitor (on your hard drive in Applications/Utilities), and look at the system memory tab. Note page ins and page outs. If page outs are 10% to 15% more than page ins, you can use more memory for the programs you run. A page out occurs when memory is full and OS X has to write a section of memory to the hard drive. Too much of this can really impact performance. The optimal situation is for page outs to be zero. Note these values reset on a system boot.

When I try to sync my iPod iCal with my MBP iCal via WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete"

Similar Messages

Maybe you are looking for