When I trying to attach files to my hotmail.Firfox always stucked and dead, it's not happen on my IE.

when I trying to attach files to my hotmail.Firfox always stucked and dead, it's not happen on my IE.

Try:                                               
- iOS: Not responding or does not turn on           
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable                                                       
- Try on another computer                                                       
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar                                     

Similar Messages

  • When I open my RAW files in Photoshop CC they are grainy and the JPEGS are not. What is going on? It doesn't seem to have anything to do with my CACHE levels either.

    When I open my RAW files in Photoshop CC they are grainy and the JPEGS are not. What is going on? It doesn't seem to have anything to do with my CACHE levels either.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • My ipod touch is not list as a device on itunes.  When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

    My ipod touch is not listed as a device when connected to my computer.  As suggested I attempted to download the latest of itunes.  I got an
    ox8007054f error code and the down load will not complete.  I have also tried to restore my computer to an earlier setting, but it will
    not accept the change.

    Have you looked at this completed previos discussion. It discusses 0x8007054F.
    Re: Error message when trying to install iTunes

  • Why when i tried to attach a document from pages it will send in jpeg not text?

    Why when I tried to attach a document from pages it will send in jpeg(image)?
    How can I attach pages to email in simple text format?

    Possibly.
    You could test that by dropping a largish image into a test Pages document and duplicating it until your document won't send.
    Some eMail clients have ceiling levels for file sizes, as do some receiving servers.
    Also test to see if you can simply export your file to pdf, in which case it will be retained on your iPad. That would be a first step.
    Peter

  • I am trying to organize a zip file with a bunch of links and files. But when I drag an image file to a folder, it always "Snaps to grid" instead of just landing where I put it.

    I am trying to organize a zip file with a bunch of links and files. But when I drag an image file to a folder, it always "Snaps to grid" instead of just landing where I put it. All of the files are going into the same zip file but I want them visually in the space that I put them and not at the bottom of the snap to grid folder location they are looking like.  I am trying to  drag and drop files in groups so that I can group them for now, but image files always do their own "sort by" when I drag them from my web pages. Links don't do it though.  I tried resetting the folder, and deleting the DS files. No luck.

    You keep asking variants on this same question. You've had replies in all your other threads. If you can't find them, go here and click where it says Activity:
    Thomas Cannon Jr.

  • HT1351 I've encoded a vinyl LP record into digital format and recorded it onto an usb as MP3 file. But when I tried to copy it onto my ipod classic, I get a message stating "was not copied to the ipod because it cannot be played on this ipod". Why?

    I've encoded a vinyl LP record into digital format and recorded it onto an usb as MP3 file. But when I tried to copy it onto my ipod classic, I get a message stating "was not copied to the ipod because it cannot be played on this ipod". Why?

    I was refering to the "sample rate", normally 44.1 KHz, the iPod might not be able to play tracks with a non-standard rate. Otherwise I'm not sure what the issue might be.
    tt2

  • When i try to attach files in hotmail, i get a message that silverlight plugin has crashed and error report indicates error about plugin-container.exe ; ihave the latest silverlight plugin. what to do?

    * I work on windows XP
    I have latest fire fox and silver light plugin
    * "silver light plugin has crashed" is what i get when i try to attach files in hotmail
    * error report indicates about plugin-container.exe.
    * where to find plugin-container.exe. to install and try

    Hi,
    Please also try to '''Disable''' the Silverlight add-on in '''Tools '''('''Alt '''+ '''T''') > '''Add-on''' > '''Plugins''' before opening Hotmail. You may still be able to attach files.

  • TB crashes with trying to attach files or pictures

    I'm running Windows 8.1, TB 24.6.0,
    TB often crashes when I attempt to attach files or pictures to an email. I noticed that it happens when browsing for the attachment file (or picture) in folders into which files are displayed in thumbnail and not so if showing only the file name (no thumbnails). Do you know if this has been reported or fixed?
    Thanks,
    Mip

    I located this bug https://bugzilla.mozilla.org/show_bug.cgi?id=802825 which indicates there is a third element.
    Some have apparently been helped by updating their flash software.
    You say Thumbnails, these often use third party DLL files to display them or generate them. Is there a specific file type in the crashing folders that is not in others, like PDF or word or some other application entirely. As the DLL has unloaded before the crash report is generated the devs are looking for a common link. Currently anti virus programs are suspect (scanning the files that are accessed to generate the thumbnails. But any observations you can offer would help here I think.

  • HT201407 hi there my iphone 3gs is an openline but im using 02 sim card..when i am trying to update it on itunes it restore all the system..but when im trying to activate it..it dosent want to activate and my sim is no longer detecting on my phone..any id

    hi there my iphone 3gs is an openline but im using 02 sim card..when i am trying to update it on itunes it restore all the system..but when im trying to activate it..it dosent want to activate and my sim is no longer detecting on my phone..any ideas on ho

    I wa aware
    I was rather hoping it might generate some info  that might be of use to help OP  it doesn't make much  sense as it stands without a  tedious  Q&A session

  • I turned off my iPod touch and when I tried to turn it back on, it won't load and just sits on the black screen with the Apple logo.... HELP!!!):

    I turned off my iPod touch and when I tried to turn it back on, it won't load and just sits on the black screen with the Apple logo.... HELP!!!):

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    Restart / Reset
    http://support.apple.com/kb/ht1430

  • When you create a PostScript file you must rely on system fonts and use document fonts

    I got this error:
    "When you create a PostScript file you must rely on system fonts and use document fonts. Please go to the printer properties, "Adobe PDF Settings" page and turn OFF the option "Rely on system fonts only; do not use document fonts."
    This strikes me as bad practice. I only want to use system fonts and document fonts will muck me up.
    That being said, I could not easily find a way to fix this with Acrobat Pro XI. I opened Control Panel (Windows 8) and found the printer and mucked around in the various ways to get to change the PDF settings (there are several ways, and some of them present the choices as bold and not just regular). I found two separate switches for "Rely on system fonts only; do not use document fonts" and turned both off, BUT that did not work.
    Frustrated, I went back to FrameMaker and clicked File > Print Setup and then for the PDF printer, Printer Properties. There I found a THIRD instance of "Rely on system fonts only; do not use document fonts" that was set differently than the other two. This was the setting the error message meant. Change this one.
    Thanks for the convoluted UI, Adobe. What a pain, but there is the answer for all who follow after....

    > Windows 7 and Frame 7.2.
    This is not a supported configuration and probably does not work, due (I'm guessing) to driver API changes from XP to Win7, which would affect generating PDF and Ps output. This would affect Save-as-PDF and Print-to-Ps+Distill (unless you have a newer version of the full Acrobat product).
    As it happens, I'm going to attempt something similar: FM 7.0 on Win7 64 Pro. However, I'm going to install that old FM in "XP Mode".
    XP Mode is a 32-bit virtual machine running actual Windows XP inside Win7. It is (now maybe "was") available for Windows 7 Enterprise, Professional and Ultimate (but not Basic, Home or not-so-Premium). When XP went off support life earlier this month, Mr.Bill may have taken down the ability  to download XP Mode (or not, since some large enterprises are able to  purchase continued support for XP at some great cost). XP Mode never was supported for Win8. There are other VMs for Windows available.
    If XP Mode is still available, you also need a CPU that has hardware virtualization, which all recent 64-bit AMD processors do, but which is fused-off in many low end 64-bit Intel processors. AMD processors need a separate unobvious hot-fix patch installed before you do anything else about XP Mode.

  • Problems converting PDF to MS Word document.  I successfuly converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file.  I have a large manuscript and I separated each chapter to assist with the co

    Problems converting PDF to MS Word document.  I successfully converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file.  I have a large manuscript and I separated each chapter to assist with the conversion; like I said, first 4 parts no problem, then conversion failure.  I attempted to convert the entire document and same result.  I specifically purchased the export to Word feature.  Please assist.  I initially had to export the Word Perfect document into PDF and attempting to go from PDF to MS Word.

    Hi sdr2014,
    I'm sorry to hear your conversion process has stalled. It sounds as though the problem isn't specific to one file, as you've been unable to convert anything since the first four chapters converted successfully.
    So, let's try this:
    If you're converting via the ExportPDF website, please log out, clear the browser cache, and then log back in. If you're using Reader, please choose Help > Check for Updates to make sure that you have the most current version installed.
    Please let us know how it goes.
    Best,
    Sara

  • HT3775 can a .mov file be recovered if the record was accidentally shut down from loss of power? i was recording from the AJA Pro Ki when we lost power, the file is there but it wont play and comes up with the message, "The document "SC1ATK63.mov" could n

    Can a .mov file be recovered if the record was accidentally shut down from loss of power? i was recording from the AJA Pro Ki when we lost power, the file is there but it wont play and comes up with the message, "The document “SC1ATK63.mov” could not be opened. The movie is not in a format that QuickTime Player understands."

    Hi,
    Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
    Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
    Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
    In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through.

  • My ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

    my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

    - Charge the iPod for half an hour.  Then reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
    - If still problem, place the iPod in recovery mode and then try to restore the iPod.  For recovery mod see:
    iPhone and iPod touch: Unable to update or restore

  • HT4528 My Apple ID or password is not recognized when I tried to download an app. I reset my password but it still did not work. My id and password worked fine on this website.

    My Apple id and password is not recognized when I tried to download an app. I reset my password but it still did not recognize it. This website recognized it.

    Did you go to Settings>iTunes and App Stores and sign out and sign back in?

Maybe you are looking for

  • Power info. inconsistent

    Sometimes, my PowerBook's battery doesn't last very long (10-15 min.). It doesn't show a low battery warning any more. Every time, when I check, the info. under "Power" are different. The 'condition' has always been "good", but charge numbers and cyc

  • I have a MacBook mac os x 10.6.8

    When I try to open Finder it will not launch, I get error 10810 showing. All help greatfully appreciated PS I am not a pro on computers so not to technical with the answers please thanks

  • HT201209 How to load my itunes account if I'm outside the USA?

    I'm here in Kuwait so please help me load the PIN I bought last night.

  • Power Loss

    When the AC adapter is plugged, in and the macbook pro is on, it says most of the time that I have 97% battery charge and that the power source is the Power Adapter. When the plug is pulled the computer dies on me. In addition the computer wont turn

  • Vat Code Determination

    Hi, I've looked at past threads relating to the config of vat code determination and it seems that our current config setting for the tax calculation is set up correctly. Currently the config is defaulted to 'Tax Calculation occurs in backend' . Howe