When I visit a link the color does not change, and if it does, it reverts to the unvistied color in a day.

When I visit a site the color of the link seldom changes to the color I have selected. also even when it does change, it reverts to the unvisited color in a day or so.

Hi.
That is happening (most likely) because Firefox is not storing your browsing history for long, or at all. Go into Tools > Options > Privacy and make sure the configurations are set as you want them to be. If they are, it's likely you have some security software that's erasing your Firefox's history (and possible other browsers' if you have them installed). The most likely suspects are antiviruses, firewalls and security suites, but clean-up utilities like CCleaner are also capable of cleaning Firefox's browsing history and other personal data. Make sure you don't have them configured to do so.
I should remind you, however, that some sites (they are rare, though) don't have their links change color when visited. That happens only when their authors deliberately make them not change the colors. You can force websites to use a color scheme of your choice by going into Tools > Options > Content > Colors... and unticking "Allow pages to choose their own colors". You can also configure the color scheme in that screen.
I hope this helps.

Similar Messages

My email on att does not connect and if it does it takes forever

MMy email does not connect and if it does it takes forever. What is my oriblem

You have to provide email to access app store,dont expect walk in and walk out

I keep getting a pop up dialogue box telling me the URL is not supported and that it can't connect to the server, even though I am able to surf the net

I keep getting a pop up dialogue box telling me the URL is not supported and that it can't connect to the server, even though I am able to surf the net

Are you using OS X Server here, or is this a connection with some other server? If this is OS X Server, what version is running?
Please post a screen shot of the dialog box, and an example of a URL that's failing. (You can use ⌘⬆4 (command shift 4) to activate the screen capture mechanism, and the camera icon here to upload the image. Please make sure you don't include any sensitive information in what you're uploading.)

My lab top,while browsing on internet site,got stucked. The cursor was not moving and I was unable to close down the laptop. Finding no alternative I just pressed and held the startup switch for a few seconds and got it closed but can,t restart. Help plse

I can not start the device after I shut it down by pressing & holding the start button. I took this measure because I was not able to force quit/shut down while on internet. The program was not responding and laptop got hot.. Any body help please....
Aarzu

If a SMC reset fails to bring life to the MBP, make an appointment at an Apple store genius bar for a FREE evaluation.
http://support.apple.com/kb/ht3964
Ciao.

HP Officejet 4500, problem with printer. Does not print and no files to be printed in the que

Hp all in one printer I send documents to be printer, but nothing will appear in the "see whats printung menu. This usually happens when I try to print from incoming documents/menus. Most print jobs from Word when from my own computer will print, but not from outside sources. Help

Hello,
Are you trying to print those external documents also from Word or different application. If different application, please ensure before clicking the print command correct printer icon is selected.
I work for HP but my posts and replies are my own.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

When moving my iphone from one computer to another, the apps do not follow and if I purchase an app on the new computer, it seems that all previous apps on the iphone will be lost How do I import the previous apps to the new computer?

When moving my iphone from one itunes computer to another, the apps installed on the original computer do not show on the new one. How do I get those apps to be recognized on the new computer without deleting them all from my iphone as it asks.

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

Cursor does not change and dock is not responding

mac mini mid 2011, 10.9.5 logitech wireless keyboard and mouse (wave). Dell 20 something inch monitor with lighting to mini display to hdmi.
My cursor will get stuck on the arrow and not change on text input fields or the index finger to select links. If it does change at some random point, it will stay to whatever it changes, until it decides to change again. This will change every 10 to 15 minutes depending on how heavy I'm using it. The dock is also not responsive. If it is hidden, it will not pop up, if it is up on magnify, it will not magnify. Once in a great while it will magnify, but only to one spot and will not change.
In addition, when I hover the mouse, things will not appear or recognize the mouse, like a print or zoom on the bottom of a pdf, or even a field on some web pages. It will not allow me to select some fields. www.jobs.ca.gov is the best example, I can not type a search or select a position. One time I even had the system settings icon stuck to my mouse and could not put it back on the dock. It followed the mouse, when I would single click, it would stay where it was, unless it was at the dock. If I double clicked it would open.
I've only had this mini for about 4 months, this problem has only been going on for the past couple weeks. There have not been any changes in those past few weeks that I'm aware of. I did upgrade to 2 4gb ram 6 weeks ago and did a software update to 10.9.5 about 2 weeks ago, but I was hoping that would fix this problem. It did not.
I was also having tons of problems with safari about a week ago, but a reboot into a certain mode, then back to normal reboot solved that.
Thanks everyone in advance for you time and help.

I had this same problem and was searching for answers. I also prefer using a circle instead of crosshairs. I hope you've figured it out by now, but, if you haven't, here is the answer (I am using Elements 9, but, it should work for other versions I think):
1. Open up Elements Editor, Click on Edit, Click on Preferences, Click on Display & Cursors.
2. Under Painting Cursors, select Full Size Brush Tip
3. (optional) - if you want crosshairs within your circle, then also select Show Crosshair in Brush Tip.
4. Click ok.
Now use the brush, and it should have a circle to use.
P.S. Sometimes if you have your Caps Lock key on, that removes the circle as well.

ATT hooked up new u-verse router, now time capsule does not work and airport utility does not see it ?

ATT hooked up the new U-verse router replacing the older 2wire router. Old 2wire router worked fine with Airport +Time Capsule. Now only the amber light flashes. When I try to reconnect with Time Machine it does not find the Time Capsule nor does the airport utility find the Time Capsule. Any help?

Okay, the 3801HGV also doesn't bridge - but there is a workaround. Info on the workaround comes from 'SomeJoe7777' at this link:
http://forums.att.com/t5/Residential-Gateway/U-verse-for-BUSINESS-2Wire-3600HGV- bridge-mode-or-another-AT-amp/td-p/2707013
As for connecting to your TC: the 3801HGV uses a default IP address of 192.168.1.254. It passes out IP addresses to your networked devices, and all of those IP addresses will be 192.168.1.something. The TC uses a default IP address of 10.0.1.1. As your primary router, if the TC's defaults weren't changed, the TC would be handing out addresses to your networked devices that are 10.0.1.something.
If your computer has an IP address of 192.168.1.something, it won't be able to see the TC if the TC's address is 10.0.1.1 (or anything else that's not 192.168.1.something). Hopefully that makes sense!
Go into System Preferences on your Mac, and click the Network icon. Click on Ethernet on the left side, and you'll be able to see what IP address your Mac has been given. My guess is that it has a 192.168.1.something address from the 3801HGV.
If I'm right about the 192.168.1.x address, and that your TC is running with 10.0.1.x addresses, then that's why your Mac can't see your TC. In this case, you need to change the Mac's Ethernet setup to manually set your Mac to a 10.0.1.x address for the TC to see. To do this, go to System Preferences, then Network, then click Ethernet on the left side.
Set the Configure IPv4 dropdown to 'Manually', and it will open up some places for you to fill in information:
IP Address: 10.0.1.15 (or a similar number that won't conflict with your TC's address, but starts with 10.0.1)
Subnet Mask: put in 255.255.255.0
Router: 10.0.1.1 (I'm assuming here that your TC was running with the default IP address; if it was something different, then set Router to whatever IP address your TC was using.)
Then, click the Apply button to make your changes active.
Now, since your Mac's IP address will be in the right "subnet" for your TC, they should be able to see each other. (It's kind of like having to live on the same block as someone to be able to talk with them. In general, if your computers don't have similar addresses, they can't talk to each other. Of course that's simplified greatly, but you probably get the idea...)
Once you've got the IP addresses matched up, you should be able to see your TC. At that point, you can update the TC to work with the 3801HGV. I recommend setting it to bridge mode, but if you can follow SomeJoe7777's advice, go for it!

My iPhone just turned on after some damage but the brightness will not change and I can't see anything how do I change it.

My iPhone had water damage and I have had it in rice for at least a month. This morning it started to play music and I got so excited. I plugged it up and left it and when I turned it on the brightness was all the way down. So I thought I just left it this way by when I tried to change it my phone said it was all the way up. I would want to use this phone again how do you change the brightness?

Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Also, plug it in to mains power and let it fully charge.

I have update ios5.1 now wifi does not working and wifi hotspot does not displaying in setting

Dear All,
I have update ios5.1 last week on my iphone4 16GB. Now Wifi is not working and Wifi Hotspot not displaying in setting menu.
Pls help. What can i do now
Senthil

Can you tap the little "i" in the blue circle and "Forget this Network"

Still Images not changing and title cards doing same.

If i was to add 5 images into i movie and hit play when the image is meant to change it doesnt, it changes on the clip after the one is is meant to. Title cards do the same.
Its like some where to clip is being told to run for longer than i can see!

Welcome to the forum.
Along with John's question regarding the pixel x pixel size, have you thought about doing the work with the stills in PrPro, and then just Exporting as is necessary (or using ADL)? While Encore has a limited SlideShow feature, it is designed to work better with AV files, than stills.
Good luck,
Hunt

TS4424 i have reinstalled both updates as advised above, but mail v4.6 still does not work and I still get the same error message on mail 4.5

I have reinstalled both updates as advised above but mail v4.6 still does not work and mail v4.5 continues to have the same error message?

Maybe some help here.
http://support.apple.com/kb/TS4424

Tables are deleted but database size does not change in sql server 2008r2

Hi All,
20GB Tables are deleted in my database but database size does not change and disk size showing same size.

Hi ,
I have ran the Disk usage by Top Tables report and Identified couple of tables with unwanted data for last 5 years. I have deleted the data for the first 3 years and then ran the Disk usage by Top Tables report again. When I compared the report before
and after the data deletion, I have noticed certain facts which is not matching with what I know or learned from experts like you. The following are the points where I am looking for clarification:
1.Reserved (KB) has been reduced. I was expecting the data Reserved (KB) will remain the same after the data deletion.
2. The Data(KB) and Indexes(KB) fields have been reduced as expected. The Unused(KB) field have been increased as expected.
I was expecting the total of Data(KB) and Indexes(KB) field space gained will be equal to the Unused(KB) field gained after deleting the data. But that is not the case. When I deducted(subtracted) the difference in the Reserved(KB)(Difference before
and after data deletion) field from the Total of space gained from the data deletion is equal to the Unused(KB) gained field value.
I am not a SQL expert and not questioning but trying to understand whether we really gain space by deleting data from the tables. Also keen to get the concepts right, but my testing by deleting some records confused me.
Looking ahead to all your expert advice.
Thanks,
Vennayat

My keyboard does not change language in facebook log in

I just bought MacBook Pro 15'4 I am in general new user with mac !!! My primary keyboard language is English and my secondary is Greek. When i try to log in to my facebook account i wrote my e-mail (in english of course) and my password is in greek and when i change the input source to greek does not change and greek became transparent in the language bar at the top !! I don't have an idea why cannot let me change the language only in this step to put my psw. I am using Safari and Chrome too, and is happening in both browsers too !!! I would be greateful and apriciated if someone can help me !!!

thanks a lot for your help !!! i downoladed firefox and the same problem when i will go to put my psw only in this step cannot let me change from english to greek !!!! why this is happening ??? i think that,this is a browser problem not macbook's or keybord problem !?!
*and it still does it when i change the primary language to greek again

Keynote background opacity does not change

Hi all,
I want to make a transparent background on on Keynote'09 5.1.1 (1034). The background colour opacity does not change for some unknown reason.
This is the way I do it: open keynote - select a white or black theme - open the inspector - go to slide inspector - go to appearance - set background as colour fill - double click on the slide icon on the bottom of the inspector to open the colour inspector - set opacity to 0% - close the colour inspector - open it again and the opacity is 100% again.
Please help!

butterflymika01
ilyasmussin is right. There is a way to change the opacity level of a background image in Keynote.
This discussion is not about changing the opacity of an image, it is about how to create
a transparent background, refer to the the original post quoted below.
I am trying to export a video with a transparent background. in Keynote.
I explained in my last post that the background layer can not be made transparent in Keynote as there is no alpha channel in Keynote. The background layer will always be filled with either an image or a colour matte.
What you describe, is changing the opacity of an object, which the original poster knows how to do.
This Keynote canvass should explain the difference between opacity and transparency, the same image is placed on an orange object with different properties applied:
1 - 0 % transparency and 100% opacity
2 - 100 % transparent background using an alpha chanel created in Photoshop,
and 100 % opacity
3 - 0 % transparency and 50% opacity
4 - 100 % transparent background and 50% opacity

When I visit a link the color does not change, and if it does, it reverts to the unvistied color in a day.

Similar Messages

Maybe you are looking for