When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing
When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing happoned
First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem.
Similar Messages
-
my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!
If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808
-
I really need to get this fixed
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPhone4S: tried to update to iOS6 and now will only show "connect to iTunes" screen
I've got an iPhone4S and tried to update to iOS6 via iTunes. While installing, a message came up on my computer saying that "iOS6 could not be installed due to an unknown reason" (I'm paraphrasing b/c I didn't write it down, figuring that I could just re-do it). Ever since that message came up, neither iTunes or my computer recognizes that the phone is plugged in. Also the phone sceen is stuck on the "connect to iTunes" screen, which displays the USB cable with an arrow pointing to an iTunes logo. I've done the 10 seconds reset, updated iTunes, etc., and everything else that the iPhone troubleshooting suggests. Nothing is working, and my phone is totally un-usable. PLEASE HELP!!! Thanks!
1)I tried tinyumbrella. But it stills stucks in Recorvery Loop.
2)Tried also using DFU mode buty tinyumbrella isn't detecting the device in DFU mode.
3)I also tried iRecovery and results are same.
4)Is there anyother way to break the recovery loop as i don't have any backup for my device. -
when i started updating my iphone by itune that time my computer shut down and update collapse from that time my screen shows only itune logo and a cable to connect this. already i did but now my phone is not showing in itune
You must have the credentials that were used to turn on Find my iPhone on the device. Without them, you can not get past the activation lock.
-
I dropped my ipod touch 3 generation into some water. I let it dry off completely befor turning it back on. Now it shows me the itunes logo and the usb cord picture. I restored my ipod, and now it won't connect to itunes or my computer. What should I do?
Hey
Does it charge when connected, if not you may have broken it..
You can always try an apple Genius at an Apple Store,
Jason -
i tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it doesnt show up on my computer
Hi there starbaeza,
You may find the information in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
-Griff W. -
I updated my phone to ios7 and it told me to connect to iTunes. When I did the phone said it needed to be restored. I did this and then iTunes said it can't be as it isn't eligible so now my phone won't turn on. Help please!
You can try to restore it via recovery mode as show in the link below:
http://support.apple.com/kb/ht1808 -
haw do i get my ipod 2 work after i accedently wiped evry thin off and now it just shows a screen with the lead and a itunes bubble
dennisfromabertillery wrote:
haw do i get my ipod 2 work after i accedently wiped evry thin off and now it just shows a screen with the lead and a itunes bubble
Connect to your computer, fire up iTunes and do a Restore: From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore. -
My iPad conveys that it is disabled, and that I need to connect to iTunes. When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the scree with the number board to open with a password. How do I fix this?
You will need to restore it. The sidebar of your iPad appears on itunes even if you dont enter the passcode. There's the option to restore it. More info:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software -
My iPad conveys that it is disabled, and that I need to connect to iTunes. When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the screen to open with a password. How do I fix this?
You will need to restore it. It may not sync, but the iPad's sidebar has to appear you can restore it and it will be as the last time ou synced it to iTunes. For more info:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software -
my iphone's screen was smashed resulting in not able to unlock passcode and now i can't connect to itunes to synced with my divice before sending in for repair. what can i do
Sorry, there is nothing you can do.
FYI: Damage like that is not covered by warranty, & all Apple will offer you is an out of warranty replacement...cost, in the US, for an iPhone 4, is US $149. -
I just updated my iPod to iOS 6 and now it won't connect to iTunes, and iTunes says to restore it, but if I restore it I will lose all of my data. What do I do?
Uhless this program will get the iPod out of recovery mode you will have to restore via iTunes.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
The number pad would not let me type in a 1 2 3 for my 4 digit code. After numerous tries, the phone now says iphone disabled connect to itunes. When I connected to itunes, it asked for the code which I was unable to enter. Help!
Open iTunes on computer, connect iPhone to computer with USB cable. Hold both Home and Power buttons on iPhone until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware.
-
I have tried to update my Iphone 4S today to IOS 7.0.6 and now my iphone wont connect to itunes as it says that it is detected that it is in recovery mode and needs restoring. How do I restore it? I cannot get my phone on at all?
Click restore in itunes.
Maybe you are looking for
-
Purchase order Price History Print Problem
Respected Members, When i am executing the tcode ME1P then it is showing suppose seven records and as soon as i click on print icon ,one spool request is getting generate. When i am seeing that spool request it is showing seven pages ie each page wit
-
Training and Events Mgt Correspondences (BOKF-FIX)
Hello, Am getting the following error when i try to print the correspondence for definite place of confirmation. Variables Without Values PPVAR - TLAND AttenAdd:Country key PPVAR - TSTRS Attendee's street PPVAR - T_ORT Attendee's city PPVAR - T_PLZ
-
Display jsp files with .html extension
my problem is very straight forward i want all my jsp pages to be shown with .html extension. like if i have a page test.jsp and I access it through a hyperlink Test then in the browser's address bar i want it test.html .. any ideas ..
-
I have a Sony Handycam DCR-PC109 connected to my PC with a USB cable. The PC is running Windows XP. The camcorder is set to Streaming and the video is playing on the camera's display screen. In Premiere Elements 3 I click on Capture and Import not ac
-
Im unable to set a song as a ringtone.
Hello - I'm unable to set a song as a ringtone inspite of following the procedures. Please help