When I wire connect my ipad to mac where the backup goes
When I wire-connect my ipad to my mac, iTunes opens up and it says along with other information that mac will back up my laptop. I wish to know where the Back up goes, I mean where my ipad informations are stored as back-up ?
Further, now I am going to wire-connect my iPhone to mac and I wish to transfer my iPhone photos to mac, since my iphone capacity is less. Please tell me how to transfer photos / albums from iPhone to mac when I am wire-connecting to mac.
Thanks in advance
Scy.ms
On a Mac, from http://support.apple.com/kb/HT4946, the backup is stored under :
Mac: ~/Library/Application Support/MobileSync/Backup/
Though you probably won't be able to make much, if any, sense of the files within that backup unless you restore it onto a device.
In terms photos, you should be able to copy those that you've taken with the phone to your Mac via Image Capture, Aperture and iPhoto.
Similar Messages
-
when connecting my Ipad on mac mini and launching Itunes, the "INFO" is not displayed and my calendar and contacts are not synchronized
Thanks for your advice. However my private informations have nothing to do on a wandering cloud that floats on high over US vales and hills ( and credit to William WORDSWORTH for his poetry)
-
I set up my iPad mini without a computer and have been using it for months. Now, when trying to connect it to my mac it asks if I want to set up as new iPad or restore from back up (Which I don't have).
Is there a way I can connect to my computer and itunes without losing everything I've done on it for the past months?Go ahead and set it up as new. It's just new as far as iTunes is concerned. Shouldn't result in the loss of anything.
-
How to connect my ipad with mac using bluetooth?
how to connect my ipad with mac using bluetooth?
You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
iOS: Supported Bluetooth profiles -
How to connect my ipad in mac pro
how to connect my ipad in mac pro
I have already connect the USB port but it's not connected my ipad
-
I can connect to iTunes on apple TV, but get "invalid I.d. Or password" message when trying to connect with iPad or iPhone. What the...?
Hi Boscoboi,
Welcome to the Support Communities!
You may need to check the settings for your iTunes Store on the iPad and iPhone.
Sign out of the iTunes account, restart the device and sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
If these basic steps don't resolve your issue, then follow the advice in this article for connectivity issues with iTunes:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
- Judy -
When I connect my ipad or ipod to the computer, itunes does not show them as a "device".
When I connect my ipad or ipod to the computer, itunes does not show them as a "device", however my computer can see they are connected. so it seems to be a problem with itunes. i have tried re-installing itunes and it still doesnt work.
My Iphone does show as a device when connecteing wirelessly.
Its not a problem with the driver becasue the computer can see the devices, so its a problem in itunes.Hello mimward,
It sounds like Windows can see your devices, but iTunes is not seeing them. I would use the troubleshooting in the following article named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?
I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).
-
I Connected My IPad 1st Generation To The Computed To Have It updated And I Lost All of My Pictures, How Do I Get Them Back?? Help, Please!
Did you backup the iPad first? If you did - restore from the backup in order to restore the photos in the Saved Album on your iPad. If the photos were synced to the iPad, then sync them back again via iTunes.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
If you did backup first, you will be restoring your most recent backup and you should be OK. But know that when you restore from a backup, you restore everything that is in that backup onto the iPad .... All documents, device settings, all data and so on. You cannot just select photos to restore to the iPad. It's all or nothing. -
I upgraded the Pages version on my iPad and iPhone some weeks ago. The App has not synced previous data on both AND it's unstable on both. Luckily I didn't upgrade on my Mac where the old version is working ok!
You need the new versions of both to sync data between them. If you don't have the new versions on your Mac, they will not sync.
BTW, the new versions do NOT overwrite the old on Mac. When you install them, the old versions are retained. -
When I sync my iPhone to my Mac computer the items that I have put in my phone iCal sync to the computer, but the items that I have entered on my computer iCal do not sync to my phone. How do I fix this?
look here
http://www.apple.com/support/ical/ -
My laptop quit so how do I connect my ipad and iPhone to the new one and make it work?
My laptop quit so how do I connect my ipad and iPhone to the new one and make it work?
Hello Tamthom,
It sounds like you would like to sync your phone to your new computer. I would start by using the following article to transer your iTunes and App Store purchases to your computer from your phone.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
Note: If you had content that was not purchased from the iTunes Store you will need to re import the content from its original media, to your iTunes library separately.
Then backup your device to iTunes with this article:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
After your puchases are transferred, and your device is backed up you can Erase and Sync the device, and restore your backup to it, that way moving forward you can sync it like you used to.
Thank you for using Apple Support Communities.
Regards,
Sterling -
When I forward an email from my Mac Mail, the body of the email I just forwarded shows as an attachment in the recipients outlook. Is there a way to change this so my clients don't have to open an attachment to read something that I forwarded to them?
Open Terminal in Utilties and copy/paste
This will send the attachment embedded inline. (This works in Snow Leopard, but not sure about Lion. Do a test first. If it doesn't work, just google "send attachment embedded + Lion." You don't actually have to send the message to see how it will appear.)
defaults write com.apple.mail DisableInlineAttachmentViewing 0
To reverse the setting, change the 0 to a 1
However, whether this will work or not will depend on what the e-mail client on the receiver's end does with it. -
the airplay icon is appeared in iTunes 12 on windows but when trying to connect it tell me this message (the connection is timed out)
Hello atef from egypt,
Thanks for using Apple Support Communities.
To help resolve this issue where your computer cannot connect to your AirPlay-enabled device, please follow the information outlined below.
Wi-Fi Connection
If you are experiencing intermittent playback or significant network lag with AirPlay, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your AirPlay-enabled device.
Ensure that other devices aren't trying to stream to the same Apple TV at the same time.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
Ethernet Connection
Temporarily disable firewalls (both network and local) and security software. Security software and firewalls may block ports that AirPlay uses to stream content. You can often resolve issues with security software by updating, correctly configuring, or uninstalling security software.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
Take care,
Alex H. -
When trying to restore my ipad, itunes says that the software is corrupt
when trying to restore my ipad, itunes says that the software is corrupt
Check to see if Share My Location has been turned off. If it has, enable it, then try to turn off Find my iPhone again. It worked for my iPhone 6 on IOS 8.2
Maybe you are looking for
-
I am getting "Fatal Error: null" when connection to P6v8.3.2 DB using P6 Integration API
I am getting "Fatal Error: null" when connection to P6v8.3.2 DB using P6 Integration API. I can connect via P6 client using admin account but cannot connect using P6 API. If I provide invalid credentials it says that the credentials are incorrect. Wh
-
Synchronus file to jdbc Adapter configuration.
Hi , I want to configure for Synchronus File to Jdbc Adapter. Can anyone tell me how to do it. hemant
-
Lightroom Mobile cannot access Camera Roll
Lightroom Mobile is working fine, with one exception. On the ipad, when I try to add jpgs (not raw) from the Camera Roll it says "Please allow Lightroom to access photos in IOS settings." When I go Settings/Privacy/Photos it says "Apps that have req
-
WF Question: Call Transaction From Business Object Not works
Hi Frinds I need some help in Business Object ZBUS2012 I have a method that run a report (ALV) in the PO nubmer I have a drill down to me23n with parameter BES (EBELN) when I click the PO me23n Opened Empty without the PO Number. If i try to run the
-
Change of Sales Order automatically changes the purchase order
Hi I am working on a scenario where a as soon as a sales order is created it will also create a purchase order on plant which will supply the item to the plant on which sales order is created.This works fine. Now when I change sales order( order