When installing Server 2008 Datacenter from disc, I get the error message "Windows could not parse or process the unattent answer file for pass [specialize].
This is a clean install from s disc onto a 3TB GPT drive. This is for testing. I'm not concerned with finding a more practical solution for this installation.
There is no image or answer file involved. But at the "Completing Installation" phase, I receive this error message about an answer file.
Has anyone else expecrienced this problem? The only results I find here are regarding actual imaging with answer files.
EDIT: [Redacted]
EDIT 2: Since this now happens with every single installation of Server 2008 on this system, I feel the need to keep this open and elaborate on my situation.
I originally installed Server 2008 on the 2TB partition of this 3TB drive. The partition type was MBR. I reinstalled it (there was a false alarm for malicious software) since it was a fresh install without updates or anything else installed. And for the
second time, it installed fine.
I decided to make the most of my 3TB drive and try GPT partitioning. So I went into the command prompt > diskpart > ran "clean" on the disk, then "convert GPT"
That is when I tried another install of Server 2008 and received this error message about an answer file.
I decided to convert it back to MBR and get on with what I wanted to test in the first place. So I went into Diskpart again, ran "clean", rand "convert MBR" and started the install. But this resulted in the same error message about an
answer file.
I went back to Diskpart, "clean"ed the disk, ran "convert dynamic" to make sure it was dynamic, then tried the install again, with the same result.
Now, I've tried installing on the disk as GPT, MBR basic and MBR dynamic. I've tried a different installation disc, as well. I got the same result. At this point, I'm going to switch hard drives, but I'm still open to input. Thanks for reading!
Hi,
As you swapped the hard disk, whether the same issue occurs again if you redo the same steps?
I asked "OEM or retail" because of this known issue:
"Windows could not parse or process the unattend answer file for pass [specialize]" error message when you perform an in-place upgrade in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2425962
An answer file may already contain in the disc which causes the issue.
If issue still exists you can click Shift + F10 during the installation process to see the log. Check if the installation error for detailed information.
If you have any feedback on our support, please send to [email protected]
Similar Messages
-
I set up a playlist in itunes and when I try so sync it to my iphone, I get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occurred. Using itunes 10.5.2.11 and Windows Vista 64. Any help? Thanks in advance!
I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!
-
When I try to purchase Mountain Lion i get an error message: "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed."
I can purchase other apps, why not Mountain Lion. I get the same message on my wife's IMAC.The only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Hope it helps. -
what to do when a error message says could not be restored because the firmware file is not compatible
Were you updating/restrore via the Restore/update button in iTunes?
Try deleting the existing ufirware file and try again
It is located here:
IPSW file location for Mac and Windows -
Using Windows 8.1 with Directx11, when I lauch Photoshop Elements 12 Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the latest version, Directx11, as verified by running dxdiag.
Maybe you need to enable Direct Play under Legacy Components in the Turn Windows Features on or off dialog.
1. Right click on the windows start Logo on the taskbar, select Control Panel and click on Programs
2. Under Programs and Features click on Turn Windows Features on or off and then under Legacy Components enable Direct Play -
i am getting this for the first time when i sync .iphone 3gs error message itunes could not sync calendars to the iphone because the sync server failed to sync iphone
I have tried the suggestion to reset the sync log to no avail. Anyone have another idea? This just started after I downloaded 4.3.5.
-
I have a new device. When selecting the language and country I am trying to connect to a wifi connection and getting the error 'Your Iphone could not be activated because the activation server cannot be reached. Try connecting to your Iphone to iTunes to activate it, or try again in a few minutes.
Where exactly did you get this phone?
Do you have a SIM in the phone?
There are 2 primary causes for this.
Either you don't have a SIM in the phone, which is REQUIRED to activate it, or the phone was hacked to unlock it. -
When I quit Photoshop CS6, the following message appears:
" Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
Can you help?
Thanks,
cjpnmYou may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0 -
I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service", when I checked on my network settings i was not able to find the cellular data network tab ( where we use to input APN manually). i even tried to restore my iPhone to its factory settings, Still it remains the same. i cant able to connect to Internet using cellular data. help me...Plz..
Where did you purchase it from? There are lots of iPhones sold as "unlocked" which are carrier locked phones that were hacked and are not officially unlocked. These phones are subject to re-locking to the original carrier, particularly when updated.
-
I restored my iPhone and when sync with iTunes is in progress I receive the error message "iTunes could not back up the iPhone because a session could not be started with the iPhone." Any suggestions on what to do?
Hi Judy,
Im using windows 7 and im not a computer wizard, i've tried the method by using the instruction for Win7 but it does not work, same problem still exist.
Could uninstall itunes and reinstall it back on my pc fix my problem, please advise...... Many Thanks!
VBR,
ray -
When I sync my iPhone5 with my Macbook Pro I get the following message "iTunes could not sync calendars to the iPhone because the iPhone disconnected". The strange this is that the phone did not disconnect because it sync my contacts and is charging.
Why does this happen? I have tried several cables and it does the same thing.Try:
https://discussions.apple.com/message/15519179#15519179 -
When I try to update Elements 9 I get an error message despite the fact that the update seems to download completely. Why?
Windows 7. Thanks, but why then do I get a downloading frame that seems
to indicate that it IS updating?
Mila and Bill
On 2014-12-12 14:44, Barbara B. wrote:
WHEN I TRY TO UPDATE ELEMENTS 9, I GET AN ERROR MESSAGE EVEN THOUGH IT APPEARS TO DOWNLOAD THE UPDATE COMPLETELY. WHY?
created by Barbara B. in Photoshop Elements - View the full discussion -
I am getting the following message: iTunes could not sync calendars to the iPad because the sync server failed to sync the iPad. Help!
Found the solution at http://support.apple.com/kb/HT1692.
In my case, resetting the sync history and disabling the add-ins fixed the problem. -
when I try to access iTunes Store I get an error message stating feature not available in the uk store
Exact same thing is happening to me. Couldn't find where to view the Itunes version number after a quick look. I hate the "simplified" interface by the way. On windows 8.1. Really starting to hate itunes, very buggy, and apple device locked down content (I'm looking at you TV shows and Movies) make it a pain to use.
-
Using WindowsXP, and e-mail via Yahoo,browser is Firefox 4.0.I get the following error message when accessing yahoo mail site:"http://us.f831.mail.yahoo.com/dc/launch?action=welcome&yy=1782408664&.rand=0qrsdp1o...Windows can not find(the above address is inserted here).make sure you typed the name correctly,and try again". After this message is displayed on my desktop it begins to fade,and the inbox of my yahoo mail is then displayed..I am able to work all functions of the mail without problems.( I might add at this point that i access the mail program via a desktop icon).When I close out of the program the error message box with the error described above is displayed again on my desktop.I must click on the "X" to remove it.I can access my yahoo mail via Internet Explorer with no problem,as well as accessing via my yahoo home page.
Here's an image of the ERROR Message. I'm not sure how this forum works -- if this image is an attachment or if it shows up in the body of this reply.
Here goes...
Maybe you are looking for
-
Time Capsule/usb hard drive- How to get Time Machine to back it up
I installed Time Machine with no problems. A 1 TB LaCie hard drive is attached by usb cable to the TC. The LaCie is seen by finder and I can open, edit and save files to it and so can the Macbook Pro on my network. Time Machine backed up my internal
-
How to write "Conn. info" in "dbco"
i want to connect to oracle . i do not know hot to set "Conn. info " field when use tcode "dbco" who can give a example? pls help me
-
I've found this line of code in my formsweb.cfg file, but to be honest I have no clue what it's doing. HTMLbeforeForm=<SCRIPT LANGUAGE="JavaScript">window.opener = top;</SCRIPT> Anyone know what this code might be responsible for?
-
Macbook Pro Retina awakes from sleep to grey mode of my wallpaper
I just bought a new MacBook Pro Retina with NVidia Graphics Card and OS X 10.10.2. When the computer is put to sleep overnight and I wake it in morning by opening lid, a strange thing occurs. The screen first shows my chosen wallpaper in a grey mode
-
I just forgot the wallet password,what should i do now? Solved! Go to Solution.