When iTunes closes I get " iTunes has Stopped Working message"?

iTunes works and runs fine on my Vista Ultimate system, however, every time I close iTunes I get a message stating that iTunes has stopped working. I havn't noticed any functionality loss, it's just that the dialog box is annoying. I just did a recent clean install of my Vista OS. Was the same way on last two versions of iTunes. Ran and installed Windows updates, reinstalled iTunes and Quicktime. Created and additional user and same message for that user.
Running Norton 360, Ghost 12, Logitech 518 mouse G15 Keyboard, and software is Nero 7 ultra, Pinnacle Studio 11, PowerDVD 7, Call of Duty: UO.
Any suggestions?
ty

Hi,
I experience a similar issue.
iTunes runs fine, and I can sync my nano as I did on XP.
When I listen to music through my Airtunes device, music streams just fine,
but when I close iTunes, I get the "Stopped working"-message.
If I change back so I listen on the computer instead, and then close iTunes, everything closes just fine without the error.
The error is reported as follows in Event Viewer:
Faulting application iTunes.exe, version 7.4.3.1, time stamp 0x46f9e539, faulting module iTunes.exe, version 7.4.3.1, time stamp 0x46f9e539, exception code 0xc0000005, fault offset 0x001227ac, process id 0x1348, application start time 0x01c80b73fd90b27c.
Do you also use AirTunes when you get the error?
Any help would be greatly appreciated.

Similar Messages

Why am I continually getting "Firefox has stopped working" messages?

Seems like constantly, several times a day, I receive the message "Firefox has stopped working" and that Microsoft or Windows is searching for the problem, and then it shuts down. When I open Firefox again, it takes me right back where I left off, with another open window. Also, since running an update a week or so ago, every time I click to open another site I get hit with the "Do you want Mozilla to allow this change?" That didn't happen before. Both are very annoying. I also lost my RoboForm toolbar unless I juggle back and forth the "Full Page" setting after dropping down the open menu bars. I am not, by any means, a computer whiz, so most of the help FAQs are written above my knowledge of computers level. Now when I just clicked "Automatically add" Troubleshooting info, at the bottom of this page, I got a pop up that said " Firefox prevented this site from asking you to install software on this computer". Now I'm really lost! I don't want to reset back to Default because I'll never get back the settings I currently have.

Regarding the message about allowing a change, is there more information about what the change is?
You have quite a few plugins, and they might not all be necessary. To minimize the influence of add-ons while you're troubleshooting this problem, I suggest the following.
Open the Add-ons page using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Plugins.
* Set unrecognized or rarely used plugins to "Never Activate"
* Consider setting "player" type plugins such as QuickTime, Silverlight, and Shockwave Flash to "Ask to Activate" so that sites cannot run them automatically. As you discover sites you want to allow to run the player every time, you can click the notification icon in the address bar (looks like a small Lego block) and give permission there.
In the left column, click Extensions.
* Remove unrecognized extensions, or disable them
* Disable rarely used extensions (for example, you don't use it daily)
Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Hopefully this will help keep Firefox more stable.

Since upgrading to 4.0, get "Firefox has stopped working" message constantly.

Just upgraded to 4.o yesterday and now it constantly crashes. I can navigate no more than 2-3 pages before I get the message "Firefox has stopped working" and the session shuts down. How can I go back to a previous version of Firefox? Or do I just revert back to using IE, which works fine?

Did you try to disable plugins as well?
*https://support.mozilla.org/kb/Troubleshooting+plugins
If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website, or open the crash reports page via "Help > Troubleshooting Information".
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter

Keep getting Skype has stopped working message

This started last night (2/13/12) .. I keep getting a message saying Skype is not working. I have tried everything I can find online! I have uninstalled and reinstalled it several times .. it wont uninstall in safe mode .. I have tried the (run - %appdata%\skype) and that didn't work .. I looked in my event viewer and found this code ( http:// schemas.microsoft.com/win/2004/08/events… ) but still have not been able to figure out how to fix this issue .. I signed on with another computer to my account so I know its working .. any thoughts?? Please help

Im having the same problem and i have tried all of the same things that you have nothing in the forums has seemed to work. My skype stopped working 3/11/12 looks like yours hasnt worked for alot longer. Have you ben able to find a solution yet?

When launching InDesign CS4, getting CS4 has stopped working

When I check the application event viewer,
Log Name:      Application
Source:        Application Error
Date:          4/19/2011 9:30:13 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      .casto.local
Description:
Faulting application name: InDesign.exe, version: 6.0.0.352, time stamp: 0x48bf8dab
Faulting module name: AGM.dll, version: 4.19.26.1744, time stamp: 0x48b60248
Exception code: 0xc0000005
Fault offset: 0x00244fc5
Faulting process id: 0x1784
Faulting application start time: 0x01cbfe95e76be0a9
Faulting application path: C:\Program Files\Adobe\Adobe InDesign CS4\InDesign.exe
Faulting module path: C:\Program Files\Adobe\Adobe InDesign CS4\AGM.dll
Report Id: 274a3009-6a89-11e0-981e-000ffec30344
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-04-19T13:30:13.000000000Z" />
    <EventRecordID>2740</EventRecordID>
    <Channel>Application</Channel>
    <Computer>natws-pshah.casto.local</Computer>
    <Security />
</System>
<EventData>
    <Data>InDesign.exe</Data>
    <Data>6.0.0.352</Data>
    <Data>48bf8dab</Data>
    <Data>AGM.dll</Data>
    <Data>4.19.26.1744</Data>
    <Data>48b60248</Data>
    <Data>c0000005</Data>
    <Data>00244fc5</Data>
    <Data>1784</Data>
    <Data>01cbfe95e76be0a9</Data>
    <Data>C:\Program Files\Adobe\Adobe InDesign CS4\InDesign.exe</Data>
    <Data>C:\Program Files\Adobe\Adobe InDesign CS4\AGM.dll</Data>
    <Data>274a3009-6a89-11e0-981e-000ffec30344</Data>
</EventData>
</Event>
This is a new install of CS4 on a new workstation running Windows 7 32bit. All other parts of CS4 work ok.

HI Peter
Thank you so much for this link. I tried installing it but it seems that I already have the patch installed.
I am having a problem launching both InDesign and Illustrator for CS4 but get the error message below when I launch the program.
Do you have any suggestions on this please?
I am using Win7 32bit. I have not installed Adobe Acrobat or Photoshop from CS4 as I am using that from the Adobe eLearning Suite 2.5
Would appreciate any help if you have the time.
Thanking you
Rajesh

Untill today FF has been great now when starting get firefox has stopped working message

Windows 7 pro. HP Pavilion D3 laptop 4 gb Ram. All was good up until this morning and then FF will not open just get below error. Have uninstalled and reinstalled no joy

Please make sure of the following:
*All windows updates are up to date:
*[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
*[https://www.mozilla.org/en-US/plugincheck/ Update any outdated plugins]
*Try a new profile: [[Use the Profile Manager to create and remove Firefox profiles]]

"Firefox has stopped working" message everytime the browser is closed

Everytime I close the browser, I get "Firefox has stopped working" message. I have Firefox 18 on a Windows 7 64-bit machine.
I also uninstalled and re-installed firefox but the issue still remains

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
#Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
'''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
* '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
* '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
#Go to the Windows Start menu and click on "Computer".
#In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
#Find the "Program Files (x86)" folder or "Program Files" folder.
#* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
#* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
#Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
Now, go ahead and reinstall Firefox:
#Double-click the downloaded installation file and go through the steps of the installation wizard.
#Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

HT203175 After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time.

"itunes has stopped working" message when syching iphone

Need help..
Ever since I installed the update for the apple software on my PC, when I try to sync my iphone 4 on the last step of synching I get a window popping up saying that "itunes has stopped working". Then I get prompted to close the programme.
I run Windows 7, and cannot understand why it does this.
If anyone can help, I would greatly appreciate it.

Not sure what you've seen/tried so far, so I'll run you through my standard advice as of this morning, Marty.
There's a bug with 10.1.0.54, Amanda, that is causing "iTunes has stopped working messages" (citing CoreAudioToolbox.dll in the Problem Reports for the error) for some folks when importing CDs with the AAC encoding, adding/converting files to AAC, and in some cases syncing devices (when the convert to 128 kbps AAC option is enabled).
Short of rolling back your iTunes to 10.0.1.22 and your Apple Application Support to 1.3.2 (CoreAudioToolbox.dll is kept in the Apple Application Support program files), there's a few possible workarounds.
(1) Change your importing prefs to use a different encoding (won't help with the device syncing variation though), and/or disable the convert to 128 kbps AAC when syncing option.
(2) Replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 as per:
http://discussions.apple.com/thread.jspa?messageID=12576816#12576816
(3) Or, replace your CoreAudioToolbox.dll version 7.9.4.0 with a shadow copy of a 7.9.3.0 as per:
http://discussions.apple.com/thread.jspa?messageID=12583499&#12583499
(3 and 4 do help with the device-syncing variation.)

After upgrading, I am getting the dreaded "iTunes has stopped working" message. I've followed all of the troubleshooting tips on the forum without success. Fortunately, it works on my other computers. Running Win7 pro.

After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch. I've tried the troubleshooting tips on the Forum without success (though most are pretty old...). Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep. Anybody else with this issue??

My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi

Trying to play amovie just downloaded. Keep getting "Itunes has stopped working" message.

Trying to play a movie just downloaded. Keep getting "I tunes has stopped working" message. Any suggestions for fixing this?

Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Getting itunes has stopped working message after downloading to Windows 8.1

Getting ITunes has stopped working message after 10 seconds after downloading to Windows 8.1

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2

One solution for 'iTunes has stopped working' message

This worked in my case for iTunes 10.5 on a Dell Inspiron 1525 running 32-bit Vista. Symptoms started after I had to re-install it. Suddenly, whenever I tried to dl anything from the store, the dl would hit 100%, then I'd get the error message and DEP would then shut down the program. Upon re-starting, the dl wouldn't be in my apps list. (However, the actual dl WAS in my iTunes folder -- it's just that iTunes couldn't 'see' it.)
I followed all all -- and I mean ALL -- the Apple guides over the course of 2 days with no success, even after numerous re-installs. Also tried every obsure suggestion I came across in the forums here -- and there were a lot!
What finally worked for me were the suggestions at this link:
http://www.vistax64.com/tutorials/87249-unable-install-latest-version-program-vi sta.html
Following the suggestions there, I discovered uninstalled 'debris' residing in the App Data\Local and App Data\Roaming folders, specifically two Apple folders with content. I manually deleted these. These locations aren't mentioned in the Apple guide to manually uninstalling your iTunes. (http://support.apple.com/kb/ht1923)
I also discovered debris throughout the registry which I removed manually with regedit. (Make backups of your registry before you go rummaging around in there! The usual warnings apply...)
I also found two Quicktime files residing in the main Windows directory. (Ver 10.5 no longer installs Quicktime and I had un-installed my previous versions) I don't think these made a difference but 'off with their heads' anyway. (^-~)
BTW, all of this occurs after I used Revo Uninstaller in moderate mode. So even it didn't catch all the leftover debris. (I'm not brave enough to try it on a more aggressive setting...)
Thought I pass this on in hopes it saves someone some grief....

iTunes has stopped working message after having it open for one minute.
I open itunes and a message comes up after a minute "itunes has stopped working". I got the update automatically to my Windows 7 64 bit pc 10.5.0.142. After reading tons of probelms online about version 10.5
I have decided to do nothing for now. Seems people are putting hours into trying to fix it. I was going to uninstall and reinstall but seems that isn;t working for to many people.
How do we get some help from apple?
Anyone have any answers??? APPLE HELP please!!!!!!!!!!!!!!!

ITunes has stopped working message after having it open for one minute.

It's fully updated to iOS 5 and was working fine until now. Running on Windows 7 and worked flawlessly till this point. Any tips? I already uninstalled and reinstalled. Only security software I run is Microdoft Security Essesntials and that has never been an issue. At a loss here.

iTunes has stopped working message after having it open for one minute.
I open itunes and a message comes up after a minute "itunes has stopped working". I got the update automatically to my Windows 7 64 bit pc 10.5.0.142. After reading tons of probelms online about version 10.5
I have decided to do nothing for now. Seems people are putting hours into trying to fix it. I was going to uninstall and reinstall but seems that isn;t working for to many people.
How do we get some help from apple?
Anyone have any answers??? APPLE HELP please!!!!!!!!!!!!!!!

I get a "Palm desktop by access application has stopped working" message when switching to the Month calendar view.

I have a Z22 and am running Access version 6.2.2 on a PC with Vista.
When I move from Day, Week or Year to Monthly view in the Calendar, I get the "Palm Desktop by Access Application has stopped working" (and then the Windows message saying they are checking for a solution, which they never seem to find).
Does any one know 1) how to fix this and 2) what is the cause ? Am I running old software which I need to update ?
Thanks.
Post relates to: Palm Z22

Thank you, aeisha_anis for the steps to correct this problem. I verified that I must have corrupted calendar data as the PALM Desktop does come up and work when I follow your first 4 steps and remove the data from it. I can't, however, get through the importing step at the end of your instructions. I've tried a few times and am afraid I may have messed up the data file as it now is only showing a datebook. mdb and a datebook.bak file under the DateBook folder I copied to my desktop, but no datebook.dab folder as it was showing before and I never did find the datebook.dat file you mentioned. I still have all of my current calendar data on my Palm Centro but I can't get it to sync with the Palm Desktop without getting the "Palm Desktop by ACCESS Application has stopped working" message. Do you have any ideas on how to fix this problem? Thanks much!

Getting "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine

I am getting a "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine. I already tried running setup.exe as an administrator with the same results. I have Microsoft .NET Framework 4.5.1 installed on the affected machine. Could this be the cause of this issue? Or does someone know the root cause of such error?
Solved!
Go to Solution.

Hi - are you getting it at the start of installation, during or after 100% progress has finished?
Is it just LabVIEW you're installing, or is it drivers too, in which case, what was the last large package that was installing at the time?
This could be caused by the NVIDIA chipset driver :
https://decibel.ni.com/content/message/46299?tstart=-130
Thanks
Sacha
// it takes almost no time to rate an answer

When iTunes closes I get " iTunes has Stopped Working message"?

Similar Messages

Maybe you are looking for