When logging into my work webmail, my mac displays tons of blue boxes with question marks in them

when logging into my work webmail, my mac displays tons of blue question marks - can anybody help?

Is it happening only with that one site?

Similar Messages

  • Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a quesitonmark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-key

    Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a question mark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-keylogger in ZA (an old, and no longer successful fix). Can anyone help? I need my question marks at work.
    Thanks!
    PS. my keyboard language is not set to French.
    == This happened ==
    Every time Firefox opened
    == I tried to type a "?" in a work email using remote access.

    Perform the suggestions mentioned in the following articles:
    * [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
    * [[Troubleshooting extensions and themes]]
    Check and tell if its working.
    May not be related to your problem but some of your Firefox Plugins are out-dated
    * Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
    * '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

  • HELP! Getting Blue Q with question marks when visiting web sites

    I see from the replies to similar posts that is is recommended to use the default settings under Advanced/ mime settings, in Quick time
    I always had all boxes checked in all the categories as my preference would be to have Quick time play every thing. And encountered no problems .
    I recently purchased flip4mac studio and now every thing is all messed up, web pages that used to work fine as far as saving content to my desk top or downloads folder, or copying and pasting urls, for sharing now work no more, I get the blue Q with the question mark as shown in these web sites I am completely hobbled as far as sharing my videos.
    [Post Edited by Hosts due to adult content]
    What are the correct settings for quicktime preferences ?
    and please explain kiosk mode , I do have Macromedia flash player installed, and I guess Adobe, when I visit different sites with video, and I control click on the player I am able to tell which player is playing the media, only quicktime offers the save to my computer option, this is how I wound up with flip 4 mac, it was recommended to play content , I also just upgraded my safari to the beta version
    iMac G5/G4 12 inch Power book   Mac OS X (10.4.9)  

    "What are the correct settings for quicktime preferences ?"
    Make sure you have the latest versions of Adobe Flash Player Software
    QuickTime Preferences > Advanced > MIME Stettings > Miscellaneous.
    Deactivate the "Flash Media" option.
    This tells the browser not to to display Flash Media and lets the newly installed Adobe software work its magic.
    ==================
    If the above thread doesn't help, try this...
    Thanks to QuickTimeKirk........
    Quit QuickTime.
    Open User (Home)/Library/Preferences and delete any .plist file with QuickTime in its name. Don't worry as a new one will be created.
    Open System Preferences/QuickTime and see if the window and tabs work as they should.
    The following post should be helpful also: http://discussions.apple.com/thread.jspa?threadID=779076&tstart=0
    ===================
    Since you are using Safari then I suggest that you check out Safari 2.0 Help Webpages aren't working (indicated by boxes with question marks)
    "I recently purchased flip4mac studio"
    Then you should contact Flip4Macs technical customer service and/or post in their forums if none of the above suggestions works out.
    Flip4Mac Community Forum
    Flip4Mac Support Center
    Good luck!

  • Mac Mini 2011 shows a folder with question mark

    Good morning,
    I reinstalled last night lion newly via recovery mode (internet) and somehow the internt connection was lost at night. So I tried it again and the installation of lion stucks after all was finally downloaded and the mac mini has booted up again. I see only the text "installing" and a progressbar below, nothing else.
    When I try to start the mac mini normally I see only a folder with a question mark.
    So, what to do?!
    Greetings and thanks for the help!

    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • When website or messages are opened that include pictures,all we get is a blue square with question mark I the centre. No pictures

    When we access a site,or receive email with pictures we often get a blue square with a question mark in it, no picture ?

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • Only a box with question mark when I turn on macbook air

    how do i fix my computer when only a box with a question mark is on screen when I turn it on

    Click here and follow the instructions.
    (121080)

  • MacAir using AD for authentication. In AD, there is a network home assigned to that user. When logging into that account on the Mac, it takes 1-2 minutes after entering credentials, before displaying an error that it could not connect to it, every time.

    In our AD, all users have a network home that is set (smb://home for example). For some of our Mac users using AD for authentication, there is a 1-2 minute delay between entering their credentials and the OS being presented. The OS does not present itself until the user dismisses the alert: "There was a problem connecting to server home".Local users on the same machines do not have that problem.
    It remains in the dock as User's Network Home as a ? that I am unable to remove, and there is also a 'Unknown' in the log-in items for the user as well (that I am also unable to remove).
    Is there anyway to disable this share? Or to stop the Mac from trying to connect to it before loading the OS?

    In our AD, all users have a network home that is set (smb://home for example). For some of our Mac users using AD for authentication, there is a 1-2 minute delay between entering their credentials and the OS being presented. The OS does not present itself until the user dismisses the alert: "There was a problem connecting to server home".Local users on the same machines do not have that problem.
    It remains in the dock as User's Network Home as a ? that I am unable to remove, and there is also a 'Unknown' in the log-in items for the user as well (that I am also unable to remove).
    Is there anyway to disable this share? Or to stop the Mac from trying to connect to it before loading the OS?

  • I am not able to use my CORRECT user name and password when logging into some websites. I am using a new c omputer with Vista business.

    If I use my laptop with XP, I have no problems. I also can login on my son's computer that is running Vista premium. What is the problem?? I have tried disabling add ons, virus software, defragging, disk clean up, clearing history, cookies, cache.

    "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
    "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
    <br />
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />

  • Mac Shows Folder With Question Mark On Startup?

    Hey Guys!
    I currently own a Macbook Air First Genereation (2008) running on Lion 10.7.5 (upgraded from Snow Leopard)
    Recently, when I was just using the Macbook Air, the Hard disk started spinning and was creating a lot of noise well I just ignored it and gave it a hard reboot
    So the next day wehn I booted my mac it was showing a folder with question mark on startup. I tried going to recovery (holding option on startup) but neither Macintosh HD or Recovery HD was being shown. I tried a internet recovery but it was not even entering Internet Recovery. I tried Single User mode, that didn't work.
    I really don't know what to do now, I am panicking cause I don't have a backup and all my schoolwork is inside there.
    Please reply soon and thanks in advance if you can help me
    A youtube tutorial or online step by step tutorial would be great!

    My tutorial is simple: pack up the MBA and charger and head for the nearest Apple store or Apple reseller. The error you see can mean three things: (1) your drive's system files are damaged, (2) your drive's directory or partition are damaged, or (3) your drive is dead. The fact that you can't boot into the recovery mode pretty much eliminates #1. It is possible that your drive's partition table was damaged but were that the case I'd expect that Internet recovery would work. So I strongly suspect #3.

  • How do I delete ..when logging into my email.. it populates my entire email address .. how do I stop this ?

    how do I delete.. when logging into my email.. it populates my entire email address.. how do I stop this ?????

    Hi Roam.
    Message understood.
    I managed to delete me and substitute her as Administrator. Thanks.
    you ask what machine I am now using, I am a Windows man, currently using XP Pro SP3 and have been for 10 years. A friend from the Education Dept gave me a phased out Mac with OS X in an endeavor to convert me.
    At first I was very impressed but as time went on I found that the Mac was not as user friendly as I had thought. The terminology was foreign to me, and where Windows placed thing automatically into place, with Mac I had to physically pick up and re-locate programs.
    But what really turned me off was that nearly every thing that I wanted to do I had to go to the net and try and find drivers or whatever to overcome my problems.
    A point in question, I purchased an external USB dual layer DVD burner. When connected to XP, it was recognized instantly and within a few minutes I as up and going. With the Mac, it is not even recognized let alone getting it to work!
    And then there are all the other little things like printing. In windows every thing from every page I can print, Ctrl + P. With the Mac, I am still trying to find out how to print a page from the Help menu.
    Enough said. My daughter is interested and that is all that counts. Let her work it all out, she is smarter (an younger) than me.
    Regards

  • SQL error 942 when logging into shadow system ECC 6.0 upgrade

    Hello,
    I am upgrading an ECC 5.0 system to ECC 6.0, and am trying to log into the shadow system to correct a few activation errors. With just about every transaction I attempt, I get the following error:
    SQL error 942 occurred while accessing program SAPM
    Here is an excerpt from the relevant trace file under /usr/sap/put/<SID>/<Instance>/work:
    A  GENER request remote generation: SAPMS380.
    A  GENER starting inline generation: SAPMS380 (reason: no process available fo
    r remote generation).
    A  GENER got lock for program SAPMS380.
    C  *** ERROR => OCI-call 'OCILobWrite' failed with rc=942
    [dboci.c      2561]
    C  *** ERROR => ORA-942 occurred when writing to a LOB
    [dbsloci.c    10366]
    C  sc_p=112780f80,no=112,idc_p=1127973a0,con=0,act=1,slen=123,smax=1024,#vars=5,
    stmt=11315e9c0,table=REPOLOAD
    C  prep=0,lit=0,nsql=0,lobret=1,#exec=1,dbcnt=1,upsh_p=0,ocistmth_p=11315f5b8
    C  IN : cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=1,upto=4294967295,rsize=45,vmax=3
    2,bound=1,iobuf_p=112b1c8a0,vda_p=113161020
    C       lobs=1,lmax=4,lpcnt=0,larr=112b1b4c0,lcurr_p=0,rret=0
    C  OUT: cols=1,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=1,upto=0,rsize=4,vmax=64,bound=0,
    iobuf_p=0,vda_p=1131617a0
    C       lobs=1,lmax=4,lpcnt=1,larr=112b1b5c0,lcurr_p=112b1b5c0,rret=1
    C  UPDATE "REPOLOAD" SET "QDATA" = :A0 WHERE "PROGNAME" = :A1 AND "R3STATE" = :A
    2 AND "MACH" = :A3  RET\
    C  URNING "QDATA" INTO :A4;
    B  ***LOG BY4=> sql error 942    performing PUT on table REPOLOAD   [dbrepolo#?
    @ 964] [dbrepolo0964 ]
    B  ***LOG BY0=> ORA-00942: table or view does not exist [dbrepolo#? @ 964] [dbre
    polo0964 ]
    Table REPOLOAD does exist. I am investigating whether it has something to do with the SAPUSER table, but I would appreciate any other ideas anyone may have. I did not encounter this error until the phase ACT_700.
    Regards,
    L. Lessmiller

    Hello Sunny,
    Thanks for your reply. I have looked at Notes 662644 and 400241 thoroughly and cannot find anything wrong with privileges for SAPR3 or SAPR3SHD, nor can I find anything wrong with the OPS$ mechanism.
    Regards,
    L. Lessmiller

  • How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID promts the previously used email user IDs... Want to disable this feature---How can ot be done ?

    Question
    How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID prompts the previously used email user IDs... Want to disable this feature---How can it be done ?

    *Click the (empty) input field on the web page to open the drop down list
    *Highlight an entry in the drop down list
    *Press the Delete key (on Mac: Shift+Delete) to remove it.
    *http://kb.mozillazine.org/Deleting_autocomplete_entries
    * Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    * Tools > Options > Privacy > History: "Remember search and form history"
    * https://support.mozilla.com/kb/Remembering+passwords
    * https://support.mozilla.com/kb/Form+autocomplete

  • For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent  problems when logging into some  websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop compuHelp

    For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent  problems when logging into some  websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is  a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
    Can anyone suggest any HELP
    Thank You

    For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent  problems when logging into some  websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is  a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
    Can anyone suggest any HELP
    Thank You

  • Resume from suspend problem when logged into gnome

    The computer is a Dell Inspiron 1525. 
    Suspend and resume work perfectly when at gdm login screen or on virtual terminal  If logged into gnome, calling pm-suspend correctly suspends and resumes.
    The problem occurs when the lid is closed.  The computer properly suspends to ram, but when the lid is opened I just get a black screen and I have to switch to a virtual terminal and restart gdm.
    I have tried adding the resume HOOK and removing the autodetect HOOK as described on the pm-utils wiki page.  I've also tried modifying the scripts in /etc/acpi but it seems like they are ignored when logged into gnome.
    Until updating earlier this week, everything worked fine.
    Any suggestions?  Please let me know if I can supply any more information to help diagnose this.
    Thanks in advance,
    Chris

    Kaffeine wrote:
    schuay wrote:
    Same problem here, Acer Aspire One 250, latest updates from testing.
    Any solutions??
    I solved my problem by using a fresh user directory. I guessed the problem came for a screwed configuration somewhere, I coudln't isolate it.
    You're right, thanks for the hint. Suspending with a new user/userdirectory worked.
    I'm not sure I want to do that though, since this is my girlfriends laptop and deleting her entire gnome configs is not something that sounds smart to me

  • When logged into Aruba Central, how do I search IAPs with a particular label?

    Q: When logged into Aruba Central, how do I search IAPs with a particular label?
    A: This is a very common request from many of the Aruba Central customers. For example, an administrator wants to quickly look at the status of all IAPs serving the guests in the campus? Or If he wants to immediately track down the IAPs only in the warehouse.
    In such cases, this feature would be really handy and helps us to give immediate glance of the required IAPs.
    How does this work ?  
    For Aruba Central, to help in such cases, one needs to first assign the access points with appropriate labels.  As we discussed above, all IAPs in the warehouse, can be labeled with a label string as  "warehouse". Similarly, an IAP in the guest lobby, can be labeled with a "lobby IAP" label.
    Aruba Central would then group these IAPs in the backend and index the seacrh, to be ready to pull up the list when you search with a particular label.
    Now, here is how you search the list of IAPs with a particular label:
    1. On the Central web interface, next to search text box, is the "Filter" icon.
    2. Click on the "Filter" icon and it would list out all the labels that has been assigned across devices.
    3. Select the label you need to search for and click on search.

    CarterFamily,
    Essentially, unless something odd is going on, the issue might be an incorrect Registry key entry.  If that is the underlying cause of the problem, then correcting the Registry should allow you to recover your profile.
    You might try the the following fix.
    Find, Open, and follow the procedure in the file named:  Temporary Profile Error
    Kind Regards,
    Dragon-Fur

Maybe you are looking for

  • Grab is not working. It's taking pictures fine, but the pictures are colored lines.

    I have used Grab in the past just fine. It takes nice, big pictures of anything on my screen. Yesterday, I used grab like I normally would, and it took a picture that was the same size as what I had selected, but the picture wasn't there. It was just

  • How can I get the functionality of the old "Spaces" in Mission Control?

    How can I make Lion show a space number on the top of the screen so I can see which space I am in? How can I make Lion switch spaces in a ring? ie? 1, 2, 3, 4, 5, 6, 1, 2, 3,  ... How can I make lion switch directly to a numbered space?  ie: 1, 4, 5,

  • Search user vith DBMS_LDAP.search_s  return LdapErr: DSID-0C090627 error

    Hi all, I have a problem. I need to search a user in my LDAP AD. I want to check if my user exists without using password. I wrote this procedure create or replace procedure search_user_ldap IS l_retval                     PLS_INTEGER; l_session     

  • Calling funcntions from OA Framework

    Hi OAF Guru's I have a task regarding calling function of a pl/sql package from OAFramework. I will explain a little my requirement. Function is taking 3 parameters(one is IN,the other is OUT variables). When I calling this function from the AMImpl,

  • SAP Best practice for Oracle installation on HPux

    Hi - I am looking for SAP best practices document to install ERP6 on Oracle 10G platform HPUNIX 31. Is there any sap best practices guide? Also, for Dev system, I am planning to install ABAP and JAVA stacks in one database. What do I need to do in da