When moving material from Uml-zone, we -zone etc.

When moving material from UML-zone, We-zone, etc. Can you get the system to generate individual SU#'s.
I have 30 items of XYZ, I want to move all 30 at one time and generate 30 individual SU#'s......Is there a way?

Yes, this is possible and standard
If you post a material document to place the stock into the interum storage type try LT06 and use the document as a refrence, you will need to maintain the LE quantity in your material masters and the system will automaticaly propose the correct number of SU when you click "palletization".
if you do not maintain the LE you can enter the qty as (for example) 60 X 3000EA / 1 x 2500EA (or whatever unit of measure you use)
This is very standard for WM and easy to do once the configuration is in place and you learn the transactions.
LT06-LT12
Edit: if this doesn't fit for your needs please provide more info about the transactions you currently use to put the stock into the WE-zone and how you are currently moving it out

Similar Messages

How can I preserve the date and time of photos when moving them from iPhone to iPhoto and then to other folders on my computer?

In the past I’ve had no problem moving photos from my iPhone 4 into various folders on my computer while retaining their original date and time. I would import into iPhoto, then drag the photos from iPhoto into other folders via the Finder or Adobe Bridge (which is my principal image organizer). The original date and time of the photo would always travel with the jpeg into iPhoto and then into other folders. However, sometime during a recent session transferring photos in this way, the dates of the photos started to change at the point when I copied them out of iPhoto. Within iPhoto itself, the various original dates of the photos are retained. But in Finder and Bridge, copies of those same photos all carry the same (worthless) date: the date and time that they were imported from my iPhone. I can’t figure out what would have changed on my Mac to make it start re-dating my photos. I was happily dragging and dropping photos, and suddently I started to lose the original dates. Did I inadvertently change some settings? (I am running OS 10.6.8 and using iPhoto 8.)

(I use iPhoto only to import from my iPhone; I organize all my images, including thousands of RAW files, in folders on a big external drive.)
Why are you using iPhoto at all? use image capture or drag and drop the photos
The problem is that the files I am copying are getting stripped of the EXIF metadata
eliminating iPhoto from your work flow will eliminate one oppertunity to have this happen For photos in iPhoto it is best to export them rather than drag an drop them - this assures your EXIF and IPTC data is correct and uptodate
Why would I be able, over many years, to retain EXIF metadata in photos imported from an iPhone--then one day find that the same workflow strips such photos of EXIF data?
Because exporting is the supported way to "export" photos - I never drag and drop photos out of iPhoto and I never use thrid party programs on the photos in the iPhoto library - try exporting as suggested above and see if that is the solution
LN

Computer freezes when moving files from USB, or to another partitioned HD

Hello, i've been moving files from two USB's to my Macintosh HD, and when I do that, the computer kinda freezes up, i can move the cursor, but not kinda click anywhere, and then a minute after or something, it gets normal again, but the transfer is going horribly slow. this happens when i move from Macintosh HD, to Macintosh HD 2 (a partitioned one). the files are 2 gb each USB. which means im transferring 4 gb at the time.

Neurot wrote:
I have 6 folders on my hard drive. These folders were created by downloading a bunch of rar files, then extracting them each to their own folder. I have not touched the permissions, so they should be the default of me having read/write and everyone else having read (correct me if i'm wrong).
Using two Finder windows, I drag and drop the six folders from one hard drive to another, and hold down the Apple key so that it moves instead of copies. I let go and it starts copying the files (since there is no "move", but rather a "copy and then delete").
I would recommend you don't use this method to move a lot of files between drives. it's much safer first to copy and if the copy is successful to delete the original afterward. there was a data loss bug in OS X a while back that wold sometimes lead to total loss on both the source and the target when doing this.
this bug is supposed to be long fixed but still...
How is the hard drive you are moving the files to formatted? what yo describe sometimes happens when moving a lot of stuff to or from FAT formatted drives. also, repair both drives in disk utility. repair disk, not permissions.
Message was edited by: V.K.

Issue in moving material from unres to qual using 322 mvt. type

There is a scenario in which user trying move the material from unres to quality using movement type 322 in MB1B.
error: Stock posting possible in qm only.
Material Master: activated for the material.
query; Is it possible to use mb1b to move from unres to qual?
What are other way to bring the unrestricted to quality, is that any material qm view setup required to achieve this.
Edited by: kkr_chandran66 on Jan 7, 2011 1:57 PM

We need to put it first into quality from unrestricted and then return.
Dear from unrestricted to QI you can bring back through MB1B 322 movement type it is standard process but in your case it is not allowing because the stock which is in unrestricted was cleared means usage decision stock posted by UD so to bring back that stock in QI again you need to reverser that UD first for that refer my previous reply and apply note which will reverse the lot.
what is the normal process steps for vendor return.{quote}
Make a returnable purchase order,do the delivery to vendor through MIGO 161 movement type with reference to the returnable purchase order.
Cheers
KK

Moving material from quality to unrestricted

Hi Experts,
We have a scenario where the user has given the UD but the stock posting tab was missing in the QA32 screen, so stock posting could not be done. Now in the stock overview the material is available in quality stock only. We want to take the material to unrestricted stock. Inspection types 01, 08 and 09 are active in material master. Please advise how to proceed? If we try to transfer material from quality to unrestrictedthrough 321 movement in MB1B, we are getting error message "change inspection stock in QM only ". Please advise.
Regards
Sm.

Hi
08 is Stock transfer
The QM component cannot manage stock movements for inspection lots that were created manually.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/89/9bb43418e43b4ae10000009b38f83b/frameset.htm
This inspection lot is created automatically during stock transfer or created manually ?
Alagesan

Anyone using 4.0 Beta 5 on MAC and noticing Adobe Flash creating boxes when moving away from site where flash is used?

Just upgraded to FF 4.0 beta 5 - noticing that when I visit a new page that uses Flash, I navigate away or to other sites and the box that Flash used is blanked out and super-imposes itself over the page. That means when I move from the flash page, the only thing I can do it close the browser and reopen.
Yes, I am using 10.1 (or whatever the latest flash is for my MAC - that also has all its updates). Reverted back to FF 4.0 beta 4 and NO PROBLEM using the older beta version. HELP.

That sounds like a known problem on OS X. From the known issues section of the [http://www.mozilla.com/en-US/firefox/4.0b5/releasenotes/ Firefox 4 Beta 5 Release Notes]
"Plugin content can be rendered incorrectly leaving blank white squares over web content. Scrolling or switching tabs will often fix the problem, although sometimes you must close the tab which contains that plugin content (see [https://bugzilla.mozilla.org/show_bug.cgi?id=592453 bug 592453])"
This should be fixed in the next beta.

Material description is missing when replicating material from R/3 to CRM

Hi Experts,
I am facing middleware error.
I have replicated a material from R/3 to CRM system.
I am able to see all the details in CRM except the material description in CRM.
The material i have replicated from R/3 to CRM has a description in R/3 but the same description is missing in CRM and it is showing blank.
Please help me to solve this.
Thanks

Hi,
Go to the COMM_PRSHTEXT see the table entries is there are not. Pass product GUID in this table and check.
Regards
Srinu

Whole gallery disappear when moving it from another folder

Hope i can get some clues here of something i find more than strange.
I was working on Photoshop and moving some images within Bridge and i noticed my Iphoto Library was inside another subfolder, to clarify i keep it in an external drive. So i grab it (the libray) and drag it outside the other folder when i noticed i was actually copying the whole library outside.
I stop the action and i moved the library instead, then i have a message saying that it was a folder already named 'Iphoto Library' in that location (the half copy one) and if i want to replace it, i press ok to replace, then its copying into new location...a window pops up and reads -error action cannot be continue- and the my whole library disappear. No original one nor even the copy bit, gone..
I search through with every keywords, Trash, even making a search in finder for JPEG bigger than 100kb..
I am talking here about over 20,000 pictures, so it is really strange if i'm not bump even into one image at all, and how a folder can just delete itself, specially a big one like that.
It makes no sense.
Any help?

Welcome to the Apple Discussions.
Here's a tip: choose between iPhoto and Bridge. Using Bridg on photos managed by iPhoto makes it very easy to damage the iPhoto Library. So, one of the other is my first advice.
So i grab it (the libray) and drag it outside the other folder when i noticed i was actually copying the whole library outside.
When you move an item on the same volume then it just moves. When you move an item between volumes then it gets copied. This sounds like you've moved your Library from one volume to another.
Were you doing these moves with Bridge or the Finder?
o it is really strange if i'm not bump even into one image at all, and how a folder can just delete itself, specially a big one like that.
It didn't delete itself, you deleted it, I'm afraid. It sounds like you made a partial copy then copied the partial copy over the original.
Check out a file recovery software such as File Salvage
Regards
TD

Getting error Can't read from the source or disk when moving documents from one folder to another folder in the library

Hi,
When we try to move documents from one folder to another folder in the document library using "Open with explorer" getting beloe error.
Can read from the source file or disk.
The user having below permission for the Library as well as site.
Fullcontrol,Limited access--->Given directly
Read,Limited access--->Givin through the all Test grp
Contribute,Limited Access-->given through test members grp
Read,Limited access---> givin through The group grp
Could you please help me anyone....
Thanks

Hi Reddy,
If you are moving files in two libraries in different sites, then the error will occur and it is by design that there are limitations on the DAV move commands that the DAV client is respecting.
https://social.msdn.microsoft.com/Forums/en-US/6245f332-c609-4a7b-8e00-c8b5e46f7759/cant-move-files-using-windows-explorer-cant-read-from-source?forum=sharepointgeneral
If you are moving files in the same library, I recommend you to use Wireshark to reveal the error message and enable IIS
Trace Logging for Failed Requests to examine the IIS log file for troubleshooting.
https://social.msdn.microsoft.com/Forums/en-US/47cd569d-98f2-4cca-b78e-fd178c097285/cant-read-from-the-source-file-or-disk?forum=sharepointgeneralprevious
To narrow down the issue scope, I recommend you to test with another library and see if the copy in explorer can work.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Sound changes when moving mp3 from quicktime to itunes

When I move a mp3 from quicktime to itunes the sound changes. itunes makes it sound a little worse from the original mix. I dont think its the equalizer becuase i tried fooling around with that and tuning it off for a better result.
So the mp3 sounds perfect in quicktime but terrible in itunes whats my problem?

I figured out that if i bring it into itunes as mp4 instead of mp3 it sounds alright.
So you are not moving the MP3 from QT to iTunes as you wrote in your first post. You are converting from AAC to MP3.
i tried to burn it and i think it automatically converts it back to mp3 for the burn
No.
If you have audio CD selected in iTunes prefs -> Advanced - Burning, it will convert them to an audio CD.
It willnot convert any other time unless you tell it to convert.
is there a way to burn it while maintaining the mp4 quality??
Select Audio CD or Data CD and it will burn an audio file or the MP4 file.

Imovie 11: When moving clips from event to project, the top of the video clip is cut off.

I'm working with a new project. When I add clips from an event to the project window, the top of the video clip is cut off. Quite a bit of it is cut off. It happens on every clip. The aspect ratio is correct and I've set the video to fit in frame. How can I fix this? I would really appreciate any help.

You may have stabilization turned on in the project. On one of the clips, click on the small gear icon at the start of the clip and select Clip Adjustments. In the Inspector that opens, uncheck the box "Smooth Clip Motion" against Stabilization. If this fixes it for you, do the same for the other clips.
Also, it's a good idea to turn off certain preferences in iMovie>Preferences (an iMovie menu item). In the Browser tab uncheck the boxes for both "Automatically stabilize clips that have been analyzed" and "Apply rolling shutter correction for clips that have been analyzed". See this picture:
The stabilization process causes a zoomed in effect on the video, as it has to "average" the pixels in order to smooth any shaky motion. You therefore lose a certain amount of the picture, depending on the extent of stabilization applied. Here's what iMovie Help states (in part) about this process:
"iMovie stabilizes video by analyzing the camera motion in the video and then moving the picture the opposite way to steady it onscreen. In this process, iMovie zooms in on the picture slightly. The amount of unstable motion in the clip determines how much zooming is necessary.
Zooming in crops out some of the picture, but you can fine-tune the level of stabilization to strike the right balance between keeping the video steady and retaining as much of the picture as possible."
John

OST corrupt when moving Mailbox from Exchange 2010 to Exchange 2010

Anyone come across this?
Moving a mailbox on Exchange 2010 to Exchange 2013 - the outlook client wont connect, if you remove the OST and allow outlook to recreate it comes good again.
outlook client knows the mailbox has moved as it connects to the new server
Not happening to every mailbox
thak=nks

Hi,
After you move mailbox from Exchange 2010 to Exchange 2013, Outlook should still work.
Is there any error message when these affected users try to connect? If there is, please post here for further analysis.
I saw someone failed to connect to the new Exchange server after they moved mailbox, then they restarted the Microsoft Exchange Information Store service and restarted Outlook, it worked.
If you haven't tried this, you can restart the Microsoft Exchange Information Store service to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Folder settings when moving files from pc to mac

Hi all. I have a embarassingly simple question, but I just haven't been able to figure it out on my own or find the answer under the search function. I recently got my first mac (a macbook pro, osx lion), and I've just gotten around to transferring some of my old pc files to the new macbook.
I had thought all I had to do was to drag and drop the files onto an external hard drive and then drag onto the desktop of the macbook (for example, the My Documents folder, etc.), and that's exactly what I did.
Here's my issue: when I open the "My Documents" on the desktop, the window is completely empty (Get Info shows that I am supposedly able to read&write). However, when I go to Finder > All My Files, I do see files from my pc, and the extension bar says that they are located in Desktop > My Documents.
So what gives? Is there a view/preference setting I haven't quite figured out yet? For organizational purposes, I would prefer not to sort through the files from my pc in the All My Files window.

http://forums.parallels.com/
And maybe some tips or troubleshooting tutorials on dealing with XP and Windows.
I thought Parallels now included Acronis or something? maybe Paragon.
Even Fusion, which can import a Parallels installation might be worth talking to and looking into.
http://communities.vmware.com/community/vmtn/desktop/fusion

Alternate layout created when moving pages from one document to another

I'm using CC on Windows 7 - I have 2 documents that I want to merge and make into 1 [I know people will want to know why I would want to do this - each document is the result of a different data merge - data merge can only handle one master page - so I have 2 datamerges - 2 files - and just need to merge the 2 files]
This used to work beautifully in ID 5.5 - now when I use the pages panel to move the pages to the other document - it creates an alternate layout - it is then very difficult for me to interlace alternating pages - - I use dot be able to just move the pages into place - but with eh 2 layouts it is behaving differently and in a way I do not understand. Is there any way I can get around this? or avoid the alternate layout and just have one. The 2 page sizes are identical so it is not a problem of varying size - the paragraph styles are all the same as well. I have tried to delete the alternating style but it will delete all the pages as well.
Thanks

Maybe its time for me to Replace my Preferences, because I also have 8.0.2, and I tried the same thing with two new documents based on the same preset - it still made an alternate layout. When the moved page is placed in the middle of several pages (say - after page 2, of 6 pages) all the pages after the inserted one become part of the new alternate layout. In this example, I had a six-page document, and moved one page of the other identical document to After Page 3 Here's the result

Sql server Configuration option when moving packages from dev env to production env

hi folks:
Our SSIS engine is SQL2008R2 and I am in charge of ssis package development and deployment from dev env to production env.
This is what I've done using configurations to move packages from dev to production.
1. on my local machine, I've created a database called SSIS_Config and a table that stores all
configration settings
CREATE TABLE [dbo].[SSIS Configurations]
ConfigurationFilter NVARCHAR(255) NOT NULL,
ConfiguredValue NVARCHAR(255) NULL,
PackagePath NVARCHAR(255) NOT NULL,
ConfiguredValueType NVARCHAR(20) NOT NULL
2. on dev ssis server, there is the same table [dbo].[SSIS Configurations] on SSIS_Config db which stores all configurations
Once package has been deployed to dev env and run with success, I'll move it from dev to prod
3. On Prod ssis server, there is the same table [dbo].[SSIS Configurations] on SSIS_COnfig db which stores all configurations
once ssis pkg has been deployed using deployment manifest, it runs without errors as all production db connection
will be updated manually in the table [dbo].[SSIS Configurations]
Our production env is unique as it's completely locked down and the only way to connect is through remote in session.
At this moment, I am maintaining three [dbo].[SSIS Configurations] tables : on my local machine, on SSIS dev server and on SSIS prod server.
This works fine so far as I am the sole developer... Soon, we will have more developers joined to develop ssis package .
I am wondering if there is anyway to cut the table maintained on my local machine and only use ones on dev server and prod server ?
I've tried using the table on dev server to disperse connectionstrings, it works file on dev env. However, when I deployed to product server,
since there is no sql connection between dev and prod, the configuration information can not be retrieved and theirfore package is failed.
Any ideas on how to move packages from local to dev to prod env.?
Thanks
Hui
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Thanks Nearby BI guy. Am I correct that in your SSIS packages, there is only one connection manager which gets ConnectionStr populated from package configurations which is .xmlconfig
file and you then use expressions to populate connectionStrs of other connection managers through the ssisconfiguration tables?
Also for the one on Production environment, the contents of .xmlconfig has to be manually
changed in order to match the one on production env.
Is that correct?
I am thinking about using environment variables to point to the Config Database on each
local/dev/prod environment, but some environments may have strict policy on the usage of environment variables.
thanks
Hui
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

When moving material from Uml-zone, we -zone etc.

Similar Messages

Maybe you are looking for