When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

Similar Messages

  • Ever since I upgraded to IOS 7 on my iPad, it does not remember my passwords, even though I check "keep me signed on".  Is there a setting somewhere that I am missing?  I did not have this issue with the previous OS.  Thank you.

    Ever since I upgraded to IOS 7 on my iPad2, it does not remember my passwords, even though I check "keep me signed on".  Is there a setting somewhere that I am missing?  I did not have this issue with the previous OS.  Thank you.

    Thank you, James, but I do have a WiFi connection on the iPad mini. The Numbers files update on my iPad third generation and iPhone just fine when connected to the same network.
    Do you have any other suggestions?
    Thank you!

  • Can you use 2 sets of bluetooth headphones at the same time with the Ipad 4?

    Hi, I was wondering if anyone could tell me if I can use 2 sets of bluetooth headphones at the same time with the Ipad?
    It is so my children can watch a film or listen to music together.
    Thanks

    No

  • Can't get Netflix to recognize an iTunes purchase keeps coming us with "the credit card information that you entered does not appear to be valid

    Can't get Netflix to recognize an iTunes purchase keeps coming us with "the credit card information that you entered does not appear to be valid'? Netflix says not them?

    The message you received indicates that the phone is locked to a carrier other than the one for which you have a SIM. You'll need to take the issue up with Apple. Nothing you do with iTunes is going to make a difference. 
    I'm quite surprised that the UK Apple Store replaced a U.S. purchased phone. They usually won't.
    Best of luck.

  • How can i get my logic3 istation (ip106) to charge my ipod 4gen with the latest iOS?

    how can i get my logic3 istation (ip106) to charge my ipod 4gen with the latest iOS? i had recently bought it for my ipod to play and charge my ipod

    Is it compatible with iOS 5.0.1? Some users have reported that after updating to iOS 5/5.0.1 their dock no longer worked.
    Have you contacted the manufactuer?

  • Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

    Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy.  It is a Macbook Pro  osx 10.6.8 (late 2010).

    Almost certainly none of the above!  Try each of the following in this order:
    Select 'Reset Safari' from the Safari menu.
    Close down Safari;  move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
    Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
    Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
              defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

  • My mini iPad won't let me slide the bar to turn it on or off.  Can't get in to the settings either.  What do I do.

    My mini iPad won't let me slide the bar to turn it off or on.  Can't get into it at all to get to settings.  What do I do.

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Two objects created at the same time with the same hashcode

    We have this object with the following constructor:
    2010-06-24 00:10:31,260 [LoadBalancerClientSubscriber(3)(pid:24312)] INFO  com.intel.swiss.sws.netstar.application.caching.framework.data
    set.synchronizer.DatasetSynchronizer - Initializing dataset synchronizer for: [/nfs/iil/iec/sws/work/damar/ds_cama/tmp/ds_126631277304794
    /d81], i am com.intel.swiss.sws.netstar.application.caching.framework.dataset.synchronizer.DatasetSynchronizer@2ed3cae0
    2010-06-24 00:10:31,260 [LoadBalancerClientSubscriber(5)(pid:24315)] INFO  com.intel.swiss.sws.netstar.application.caching.framework.data
    set.synchronizer.DatasetSynchronizer - Initializing dataset synchronizer for: [/nfs/iil/iec/sws/work/damar/ds_cama/tmp/ds_126631277304794
    /d31], i am com.intel.swiss.sws.netstar.application.caching.framework.dataset.synchronizer.DatasetSynchronizer@2ed3cae0Note that two objects are created by different threads with exactly the same hash code. Any idea if/how this is possible?

    isocdev_mb wrote:
    The last part definitely suggests already that relying on uniqueness is incorrect. Hash codes are very often equal on distinct objects, viz. new String("java").hashCode == new String("java").hashCode(). Use a class level counter as suggested earlier.For that case we would of course expect the hashCodes to be equal, since the objects are equal. But even in the case of non-equal objects that don't override hashCode, you can still get the same value. Or, for that matter, non-equal objects that do override it. There are 2^32 possible hashCode values. There are 2^64 possible Long values. That means that there are 2^32 Longs that have a hashCode of 1, 2^32 Longs that have a hashCode of 2, etc.
    And for non-equal objects...
    package scratch;
    import java.util.Set;
    import java.util.Map;
    import java.util.HashMap;
    public class HashCodeIsNotUnique {
      public static void main(String[] args) throws Exception {
        Map<Integer, Integer> hashCodeCounts = new HashMap<Integer, Integer>();
        int numObjects = 10000;
        for (int i = 0; i < numObjects; i++) {
          Object obj = new Object();
          int hashCode = obj.hashCode();
          if (!hashCodeCounts.containsKey(hashCode)) {
            hashCodeCounts.put(hashCode, 0);
          hashCodeCounts.put(hashCode, hashCodeCounts.get(hashCode) + 1);
        for (Map.Entry<Integer, Integer> entry : hashCodeCounts.entrySet()) {
          int key = entry.getKey();
          int value = entry.getValue();
          if (value > 1) {
            System.out.println(key + " occurred " + value + " times");
    9578500 occurred 2 times
    14850080 occurred 2 times

  • Can't get my Macbook Pro to work after I've plugged in the iPhone.

    Hey, I plugged my iPhone into my Macbook Pro 13" and the macbook just turned off itself. Now I cant start the mac back up again. I have unplugged the iphone usb. And the magsafe adapter keeps flashing green and orange and I cannot get any life in the Macbook. I've tried pretty much everything and I'm just going to post this in hope to get an answer before i turn it in to the Apple guys.

    If the HDD will boot the MBP externally and not when installed inside the MBP, usually indicates a bad internal connection.  Usually a new SATA cable will solve the problem.
    I would urge you to contact Apple Customer Support and get replacement installation disks.  They will need to know the serial number of the MBP (which is on the bottom) and there is a charge.
    Ciao.

  • Can you facetime on two iGadgets (pad 2 & touch 4 - both iOS6) with the same apple ID?

    Can you facetime on two iGadgets (pad & touch - both iOS6) with the same apple ID?

    Yes, they can both have the same Apple Id, but you must use a separate device Id.  For the pad and pod that would usually be a different individual e-mail address for each.  If you attempt to use the same e-mail for both, Facetime will not work.  (Its like picking up the phone and dialing your own number)

  • Is student version released at the same time with the full version?

    I downloaded the LR4 to see how it compares to a LR2 I have at the moment. Adobe clearly states that users testing the beta can get the full version after March 31, but I did not find any information regarding the the student version release. Has adobe released the student versions simultaneously with the full versions, upon product release?

    In the past, the student version has been the same price as the upgrade, and it has been possible to upgrade to a standard version from a student version. If that continues to hold, you'll be able to get LR4 immediately for the equivalent of the student price. Notice the "if" in that statement.
    Hal

  • Can I record video and line in mixer at the same time with iPod touch?

    Can I record video and line in mixer audio at the same time, with the iPod touch?

    What is a "line in imxer audio" You can use an externeral mic plugged into the headphone jack to record auid for a video using the 4G iPod's camera.

  • I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my  contacts  instead of the addresses stored in my comcast account.  How can I get rid of the Facebook email addresses? The

    I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my  contacts  instead of the addresses stored in my comcast account.  How can I get rid of the Facebook email addresses? The comcast addresses are stored in the comcast (xfinity) app.  I do not use the "mail" or "contacts" apps ....I go straight to comcast (xfinity).  I wish I could start over!!!  thanks.
    iPad

    I could be wrong, but it sounds like Facebook imported to your contacts.  I have the Xfinity app on my new ipad, too, but none of my stored contacts from the online version are showing, only what I manually entered into the iPads contacts are there.  When I did add the FB app, I did not grant it permission to push and pull from my ipad (not a fan of FB knowing every detail about me), so that may be where our difference lies.  You could try to open the app and change your privacy settings, or delete it and then reinstall without granting permissions to integrate.
    I'm sure someone here with a lot more knowledge then me can probably diagnose your issue better, though.  Good luck!

  • There is a little camera icon on a movie clip when I try to import it to iMovie from my iPad. I have reimported several times with the same result. When I disconnect the iPad I can no longer view the clip. Help!

    There is a little camera icon on a movie clip when I try to import it to iMovie from my iPad. I have reimported several times with the same result. When I disconnect the iPad I can no longer view the clip. Help!

    Hi eawaters,
    If you are having issues importing video from your iPad to your Mac for use in iMovie, you may find the following article helpful:
    iOS: Import personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/ht4083
    Regards,
    - Brenden

  • I recently bought a new macbook pro and set it up using the migration assistant and my mac mini.  I can't get the text message forwarding feature to work with both computers.

    I recently bought a new macbook pro and set it up using the migration assistant from my mac mini.  I can't get the text message forwarding feature to work with both computers.  It keeps saying that I only have 2 devices setup, my iPad and my macbook pro.  When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device.  I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer.  Any ideas?

    Thanks, Sig.
    The old computer is a 2.6 Ghz Intel Core 2 Duo
    The new one is a 2.3 GHz intel core i7
    In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem.  Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page.  Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
    If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them. 
    (I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

Maybe you are looking for

  • Why am i getting a shadow type display when i attempt to start up firefox after clicking on icon?

    I recently deleted an older version of Firefox that my dad had been using on his user account and i noticed as he had explained to me that when i clicked on Firefox to start it up and make sure its on my computer as a second option to our primary Goo

  • How can i transfer photos from my macbook to my imac without altering their quality

    I am trying to transfer photos from my macbook to my imac, with the same version og iphoto, but it seems that the imac is having trouble to give me clean photos, as if it was putting 2 images, one on the other.... any suggestion for a clean and quick

  • Debug Background Job

    Hello Experts, I want to debug standard T- Code 'F110' (Automatic Payment Run). Basically wat it does is just submit one program SAPF110S but as a background job i.e SUBMIT SAPF110S AND RETURN                       USER SY-UNAME                      

  • Oracle text search - special characters issue

    Hi. I'm facing a real annoying problem with text search query, and everything I've tried failed... I have a table with a varchar column indexed by text index. The column contains special characters like '&', ',' and mainly- '-'. Since I want to disre

  • JDBC-FILE(Stored procedure)

    HI Experts, I have a requirement as follows stored procedure->stored procedure->File. ie initially a stored procedure would be executed(which i could execute with help of option in the jDBC communication channel).This would result in a resultset bein