When playing netflix with the HDMI cable attached to my iphone it freezes up??

When I attach my iphone to my TV via an Hdmi cable, it freezes up and stops continually???
Can I fix this?

You couldn't turn the machine on because it was already on (and therefore warm), although the screen was asleep and refusing to wake properly. When you held down the power button as I had suggested, the machine turned off as it's supposed to do, and when you restarted it, it started normally, as I expected it would.

Similar Messages

  • IPad 1 will it stream Netflix with the HDMI adaptor?

    Will IPad 1stream Netflix with HDMI adaptor? In HD.

    i believe it will play with the hdmi cable and all the out put cables
    but not 100 % sure about HD video, i would imagine so, its so hard to find real hd video on netflix, computer hd content can be different from set top box hd content.
    the one thing that netfix won't do is play over airplay they won't support it

  • I get no audio on the tv with the hdmi cable with my mc book pro 2008

    Connect your computer to a samsung tv with hdmi cable and audio only I get the laptop, I do not get any option in system preferences to change the audio or anything, thanks hope someone can help me

    Your model cannot carry sound through an HDMI adapter. If you have an auido in port on your TV, you can probably use a 1/8" stereo cable to carry the sound from your computer to your television.
    Good luck,
    Clinton

  • Labview locks at startup with the network cable attached

    I have an embedded application that is running winXP and Labview 7 Express.  I have my VI running from the startup menu as I have no keyboard, mouse or monitor normally attached.  the application uses TPC to commincate over a wireless network.  When I boot the computer with the network hooked up Labview locks up and a few minutes later the computer shuts down.  If I close Labview from Task Manager and restart the app it works fine.  The TPC part of the application is not running until a toggle switch is activated so the TCP part of the program is not active at start up. 
    Any help would be appreciated.

    Is it possible that Labview is trying to run the application before windows has fully come up?

  • Problem with the HDMI cable.

    Hi folks.
    I was living in another country where I have had my TV and MacBook Pro Retina there with the Samsung TV via HDMI cable I was watching movies. Everything was perfect.
    Recently moved to another country, I brought with my of course my MacBook and HDMI cable.
    The problem now is, I have the very same Samsung TV and everytime I connect the TV with MacBook the TV displays green. Sounds work perfect. I can see everything but with the green thing on TV.
    I bought another HDMI cable thought the problem would get solved, but the same problem even with the new HDMI cable.
    Do you know how to solve this problem, guys?
    Thank you so much.

    Hi Alinem7!
    Here is an article that will help you troubleshoot this issue:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • I have an iPhone 4S and bought the Universal Dock, I use the iPod and move photos, but I can not move slides on TV with the HDMI cable. What can I do?

    I always use Keynote for presentations and would like to use the Universal Dock to put the Iphone and move slides. Someone got something?

    Have you tried this without the universal dock?

  • Re: Qosmio X300-12H - Screen blank if I connect the HDMI cable to my TV

    Hello all,
    I'd be most grateful if anyone could help with this..
    I updated my laptop and then re-started to find that the screen just stayed blank after the Windows start up stuff. I eventually found that by removing the HDMI cable to my tv it all worked fine again;)
    However, as soon as I plug in my tv with the HDMI cable the screen goes blank again:(
    PLEASE HELP!!
    Many thanks,
    Sam

    Hey!
    yeah this is really strange, am getting the same issue with my X300-11T.
    i connect the HDMI cable while my nvidia control panel is open it shows that the samsung tv is connect.
    then shortly after the laptop screen goes blank. on the TV it shows Toshiba-PC in the corner but the screen is blank.
    tried to use the FN keys, but no response. have to restart the computer and disconnect the HDMI.
    tried messing with settings in the nvidia control panel, windows display settings, and control but still nothing.
    running on vista premium 32-bit.
    am not using the driver from the toshiba site though i got them from nvidia, am gonna try an see if maybe thats the reason.
    is anyone whos getting this problem using the display driver from toshiba?

  • When I plug my phone into my PC with the USB cable an ad starts playing on my PC. How do I stop this?

    When I plug my phone into my PC with the USB cable an advertisement starts playing on my PC. The advertisement is for an add-on product called Backup Assistant Plus. How can I stop this?
    I read of a work-around to stop this, but it does not meet my needs. The work-around is to change your USB connection option from "mass storage device" to the one of the options about uploading pictures. This would not work for me because I'm connecting the cable so I can access the phone's memory as a mass storage device!
    This is a seriously obnoxious problem affecting millions of people. It's a common conversation in bars, and all the iPhone fans are saying--yea, I told you so, stuff from Motorola is junk. I'd recommend that it be fixed as soon as possible!
    Model: Droid Razr
    Android version: 4.0.4

    Yes, you can stop it. When you plug in the phone, down in the lower right of your screen, click and pull up the Motorola Device Manager. Do as you please with it.

  • My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver.

    My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver.  This only occurred on the rented video and on recorded shows on my cable DVR. previews and other content on Apple TV are fine. Any ideas??

    Previews and trailers do not contain 5.1 audio.
    If you have recently moved your setup, you may have inadvertently changed some of the settings on your receiver. It certainly sounds as though it is unable to play the 5.1 audio from the Apple TV.

  • Since upgrading the IOS 8 on my IPad 2 I can longer get a full screen on my TV when connected with an HDMI cable. anything I should change in my settings? Right now my iPad is mirrored on the TV with a black box all around the edge

    Since upgrading the IOS 8 on my IPad 2 I can longer get a full screen on my TV when connected with an HDMI cable. anything I should change in my settings? Right now my iPad is mirrored on the TV with a black box all around the edge

    I have reached the same conclusion in the mean time. I have done a bit of investgation in to other grahics cards and am seeing some that show SPDIF connections from the card to the mother board. I was not familar with SPDIF but it did a little bit of sluething. It is of course a digitally enconded voice. I am guessing that in that case the mother board ( assuming it supports this hardware option) would use this output and be able to translate that digital audio to its other audio outputs. That is a lot of guessing of course. I think my "solution" might  be a whole new desktop - a rather drastic course of action! I was in the proceess of getting ready to upgrade this machine anyway with a new graphics card (which I will now return), go to Win 7, and maybe even a new digital TV reciever,  and I don't want to throw good money after bad anyway.
    Thanks for your comments

  • Can you hook up your iPod Touch 4th generation with an HDMI cable to your HDTV and play videos from your iPod to the TV?

    I'm trying to find out if I can hook up my iPod touch 4th gen. iOS 5.0.1 to my HDTV with an HDMI cable and have it mirror what I do on the iPod Touch like mirroring videos for example. I need to find out and if so, how?

    You can only output content to your TV if the App you are using supports the TV Out functionality. Mirroring is not supported on the iPod Touch.
    If you still want to output content from your iPod to your TV, make sure you have the right cables as described here.
    iPhone, iPad, iPod: TV out support
    B-rock

  • I want to link my Mac Mini through my independent hifi system, which forms part of my home tv system which is the monitor I am using with the Mac Mini. The hdmi cable I am using comes from the receiver of the tv. I cannot get sound from the Mac Mini. Do

    I cannot link my new MacMini with my TV's sound system. It's a Pioneer screen & receiver with an independent Pioneer Amp. The Mac Mini does not pick up the sound through the hdmi cable, so how do I get sound going through the MacMini so I can appreciate the music and films I want to hear. Do I need another piece of Apple kit? I have seen 'Express' on Apples web site. Surely I dont have to pay for this as well?
    I used to have an Apple TV box which had a seperate audio connection from my Pioneer Amp and it worked great.
    Help will be appreciated

    The Mac Mini is going to be used for an Internet connection on the Pioneer Plasma/receiver so I can also play stored films from a seperate hard drive. The receiver has an HDMI connection which I have connected the Mac Mini too. the picture is fine, but there is no sound. I have checked the 'sound' settings on the Mac Mini and it registers the Pioneer PDP receiver is connected but states it has no audible connection?

  • I cant figure out why my HTC Droid DNA is no longer recognized by my computer when i hook it up with the USB cable that came with the phone.

    I used to be able to just plug in my phone with the USB cable to my Windows 7 computer and browse phone storage with no issues. Now my computer sees it as an android phone but when it tries to automatically install the drivers for my phone on the computer, i get an access denied error message. No option on the phone that i can see that allows me to mount phone as a usb drive. This used to work just fine with nothing more than just hooking up the cable. What gives??

        Let's get that access granted again, e_rock_b. The HTC DNA doesn't have a special USB Mass Storage Mode that needs to be turned on. Usually, it's as simple as connecting and browsing http://vz.to/1jktbZD as you mentioned. If your computer is no longer allowing that easy access, try the steps at http://vz.to/1jktvr6.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • My Mac simply ignores my Iphone when I connect it with the USB cable. WHY? how Can I fix it?

    My Mac simply ignores my Iphone when I connect it with the USB cable. WHY? how Can I fix it?
    I was able to connect the first time, but after that my computer simply rejects the Iphone and nothing happens. The Iphone doesn't spin or try to reboot even! .
    WHAT to do? I got it today.

    When you say it ignores your iPhone, do you mean it does not appear in iTunes if you launch iTunes? Or it does not appear in Finder? Or does not appear in iPhoto? Or you get an error message?

  • HT1551 the apple tv seems to be on and is plugged into the tv with an hdmi cable and the hdmi port is selected, but the tv is flashing that this is "not supported mode" even though this samsung tv has two hdmi ports

    I have my new apple tv connected to my tv with an hdmi cable, but nothing appearing on the screen.  any suggestions?

    I just fixed mine by following the steps in this article http://www.xlr8yourmac.com/archives/aug14/080814.html 
    Basically, turn off file sharing, remote sharing etc... in apple preferences and it worked.  Apple support didnt help and told me to take back the device !  I initially restarted, rebooted,reset apple tv,  updated, unplugged everything including the router- unchecking the sharing boxes in preferences is the only thing that worked.

Maybe you are looking for

  • Quick Font Sampling Not Working in Illustrator CC 2014 18.1.0

    I just updated Illustrator CC 2014 to version 18.1.0 and have lost a feature I've come to depend upon to try out different fonts. I don't know what to call the feature, but this is how it worked: With a type box selected or type highlighted, I would

  • Installing iOS 4.1 on iPhone 3Gs using iTunes 9.2.1

    I'm trying to instal iOS 4.1 on an iPhone 3Gs using iTunes 9.2.1 with no luck, it seems. When I follow the instructions as per the Apple website I just get a message saying "This version of iTunes (9.2.1) is the current version". Can anyone shed some

  • How to pass dynamic logical expression to function module

    Hi, I'm using FM META_READ_TABLE as below: As mentioned above im using META_READ_TABLE FM to get company codes from CSKS table of ECC. Below is the code im using:    DATA:i_opt type STANDARD TABLE OF RFC_DB_OPT, i_fld type STANDARD TABLE OF RFC_DB_FL

  • No 64-bit long ints in LabVIEW 7? [Also: beta version of 64-bit LabVIEW?]

    Is there no primitive data type in LabVIEW 7 that corresponds to a 64-bit long int? [I guess LabVIEW would call it either I64 or U64...] Please, please tell me I'm wrong - if I'm right, this is an unacceptable state of affairs. And, if I'm right - wh

  • TextField and TextArea do not update

    I have a table with a TextArea and a TextField. The table shows certain rows from a database based on a filter. The filter basically only shows rows owned by a certain user. When I change ownership, the particular row from the table disappears as it