When printing slides with notes, only notepart shown on screen is included

Hi
I make presentations with really long presenters notes. During presentation I can scroll the presenters notes on screen with U and D, but my problem is when printing the slides with notes, only the part of the notes that is shown on screen is printing, so I sometimes half of the note section on a slide.
Is there a work around, or is it just the way life is?
Thanks in advance.

I too am having the same issue. I am trying to print out a monthly calendar like I see on the screen. At the most on any given day I have 4 lines of text. It shows on the screen but when I print it puts 3 little dots above that particular day to let me know there is more to it and refuses to print more than 3 items. I have tried with different page set ups and all I am doing is wasting ink. What's worse, is that there is PLENTY of room left on the paper. There is so much room between the month label and where the calendar starts there certainly has to be a way to adjust this. (I would hope!) Anyone please help! Thanks in advance.

Similar Messages

  • Print Slides With Notes: change size/layout of elements?

    Is there any way to change the template Keynote uses when printing Slides With Notes? I'd like to reduce the size of the slide & increase the size of the Notes box.

    Here is a somewhat klunky workaround that I use
    First make a custom paper size that is bigger than the paper you will end up printing to (I use 8 1/2 by 16 to print to 5 1/2 by 8 1/2)
    When you go to print the keynote file change to this paper size in page setup
    Then instead of printing save to a pdf file
    Open the pdf with Adobe Acrobat Reader
    Set the paper size to the size you actually want in the page setup dialog
    Go to the copies and pages drop down menu and select "paper handling"
    Click the "reduce to fit" item
    Print the file
    If anyone has a simpler way I would love to know it too!

  • Printing slides with notes

    I successfully imported a presentation from Power Point to Keynote 4.1. When I went to print individual slides with notes, only a portion of the background graphic was printed and none of the foreground slide material printed. The slide had the following error message
    ERROR: undefined
    OFFENDING COMMAND: @=U77LJNM;i,UPtn4
    STACK:
    The same slides print fine in PowerPoint.
    Anyone seen this problem? Anyone have a solution?

    I solved my own problem. The answer was right under my nose.

  • Notes cut off when printing, issue with margins

    When I print a slide with notes, the notes complete cover the width of the page, flush left and right. My printer cuts the margins automatically (not a bleed), so those portions of the text in the notes gets cut off.
    Any way to control the margins, left and right, when printing notes from Keynote?

    Keynote print layout is a bit of a mess, and is well commented on by users, it prints differently than previous versions, eg  in handouts the slide image is much smaller than previously, in grid, the slides are off the printable area on the left.
    We are hoping this is fixed in the round of scheduled updates.

  • I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.

    I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.
    Programs (Safari, mail, messages) keep crashing, mail will not delete properly (some will keep popping into my inbox again for no reason!!!), slow, settings lock up etc. etc.
    This only seemed to become an issue once I updated to ios 5.1 and funnily also affected my Ipad even though i hadn't updated the software yet. I have since updated the software on my ipad thinking it might help too but that only made things worse!! So I am not sure if it's an ICloud issue, but when i try to disable ICloud my devices lock up as well.
    The battery life is also shocking!!
    I have hard reset both devices, restored both devices, reset the setting and tried a whole host of other suggestions (like closing background programs) on this forum buit nothing works and i am tearing my hair out.
    I looked in the phone and ipad log and there do seem to be low memory reports though i don't know why these are occuring now when they never have before??
    I don't know if I can restore the old operating system (If I can please let me know how). The phone or ipad are not jailbroken.

    but you should have a backup in itunes.
    Every time you sync your iOS device iTunes creates a backup. go check if its there, iTunes Preferences >Devices. and there you should see if you have a backup, and in case from which date the backup is.
    And ofcourse you can get your icloud data back by just logging in with your Appleid under icloud in settings on the iphone.
    But anyway, if the iPhone works when you restor it as new: try adding your backup, and see if the issue comes back. And experiment with your backup and try to work out what is causing the issue, my guess is that its some app!   Good Luck!

  • Printing slides with Word

    I work with Captivate 3 and I'm trying to print slides with
    word. I'm working with Flash Player 3 as well.
    Each time, a error message appears saying that Word could be
    occupied.... And it's not the case.
    As anybody had the same problem ?
    Thank you for your answer.

    Welcome to our community, dedevillars
    What version of Word do you have?
    Cheers... Rick

  • How to display and print CCR showing not only results, high, low or normal, but also normal ranges of tests.

    How do I display and print CCR showing not only my actual results, high, low or normal results, but also normal ranges of each test?  I can do this individually but not for the composite CCR.
    Thanks.

    Hi,
    I'm not exactly clear on what you are doing. I can tell you that the ranges and flags for high, low, and normal come from the lab results provider in the lab results they sent you, not from HealthVault. If you go back to the original document that came from
    the laboratory, you should be able to open it as a document and print it.
    I hope this helps. If not, please respond with more details, or if you'd prefer a private conversation, please contact HealthVault customer support by opening a support ticket with them.
    Thanks,
    Kathy

  • When i get a call unknown is shown on screen even if the number is saved in my phone

    when i get a call unknown is shown on screen even if the number is saved

    Caller ID is a carrier feature & the number must match exactly what is entered in your contact listing.

  • Mac with Lion OX, in print preview with PDF, only page 1 comes correctly, the rest misses some portion rest not

    I have iMac desktop with Lion OS. I am using Firefox 6 web browser. Previously with Snowleopard OS I did not have any problems with printing, With Lion OS print commands have changed and when I click preview in PDF format for printing a web page, only page 1 of the document shows correctly. In second page, the text does not show all of the document and few lines at the boundary is missing and the font is different from page 1. I tried using Google Chrome browser and this does not have this problem. If I do not find a solution I may be forced to move to Google Chrome. I will really appreciate a response. Thanks.

    Why not reconstruct the pages in InDesign they way you want the double pages to appear. There may even be an imposition script available that will do the trick. You could then output to pdf all the pages you want the full spread on. Leave the original to create the pages you wanted left as is.
    You can ask in the ID forum about an imposition script. I know there was one with CS4, there may have been one with CS3.

  • Strange font when printing pdf with Reader X

    Hello,
    Who can help? I recently upgraded from Adobe Acrobat Reader 9 to Adobe Reader X. Since then, a strange problem occurs. When printing a pdf files to a printer, the font is changed. When viewing the file on the screen and printing them with version 9, everything is OK. The Arial font appears as it should. But when printing, a very ugly font type appears. The pdf files I use contain only a 'standard' Arial and Myriad Web font.This problem is very annoying.
    Can somebody help? I use version 10.0.1

    If you go the attached web page:
    http://www.adobe.com/support/reader/
    (http://www.adobe.com/support/reader/) ,  you
    will see "download an older version" underneath
    the Download Adobe reader.
    If you click in this link (download an older version), you
    can pick from version 8 and 9.
    Since erasing version 10 and downloading version 9.4,
    my problem has gone away completely.
    As with you, I consider this a major problem. It certainly added
    a lot of grief to my life when I could not trust my printer
    output at all.
    Hope this helps.
    Marsha

  • Missing field when printing labels with Address Book

    I am would like to print the labels for my clients Christmas Cards, using AddressBook. When doing print > label, I get all their names and addresses on the labal formt that I want but the company name is missing. How do I get AddressBook to include the field "company" into the label ?
    Thanks for help.

    If you need to include the company's and individual's name, here's a work-around:
    1) for each such card, you put the individual's name and leave the Company field empty.
    2) Put the company name in the field for "Street"
    3) Put the street address, including Apt. # in the field for "City"
    4) Now, put the City, State, and Postal Code all in one field: the field for "Country".
    5) save the card.
    When printing labels, proceed as follows:
    1) Print>File>choose your Avery label under "Layout" and then click "Label."
    2) Here, you make sure to check the box so it will "Print country." Don't forget this step, or the whole plan is a failure.
    This works, but it only works if the card is in-putted as described above. It won't work if your cards are already set-up with the "company" field and the "name" field.

  • Print days with events only?

    I have an iCal with events on random days over the last few years. I would like to print the days with events only, in order, with notes and times.
    How / Can I do this?

    I think the best (only?) option - although it's more labour-intensive than you want - is to go to each day separately and print it. Using a range of dates will, as you observe, waste loads of paper.

  • How to pop up error message when printing invoice / delivery note

    i have a problem that when I'm going to print the invoice (VF03), i have to check the field displayed e.g. port of loading, final destination should not be empty.If both are empty, when user is ready to print, then alert message is displayed (e.g. Please return to the invoice to fill in the port of loading / final destination) and is not allowed to print it out
    i'm using Zxxxxx program (including the subroutine)  and SAPScript form Zxxxxxx ,in the form, i use "PERFORM XXX IN PROGRAM ZXXXX" to call the parameter,so how can I do the alert message and stop the printing process and Do i write a checking subroutine in the program and perform that subroutine , so that when that required fields are empty, then show alert when printing?
    PLs advise

    Hi Sky,
    i wont suggest you to give a pop up as if you try and execute the invoice in background it would cause termination.
    Standard way of doing it is by updating nast entries. You can refer below mentioned pseudo code. You can also refer to any standard driver program & form attached to a output type for  more code.
    The below code would show your output condition in error status if your condition fails.
    **Do you validations in the print program and  check for return code.
      IF SY-SUBRC NE 0.
        PERFORM PROTOCOL_UPDATE.
        RETCODE = 1.
        EXIT.
      ENDIF.
          FORM PROTOCOL_UPDATE                                          *
          The messages are collected for the processing protocol.       *
    FORM PROTOCOL_UPDATE.
      CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
           EXPORTING
                MSG_ARBGB = SYST-MSGID
                MSG_NR    = SYST-MSGNO
                MSG_TY    = SYST-MSGTY
                MSG_V1    = SYST-MSGV1
                MSG_V2    = SYST-MSGV2
                MSG_V3    = SYST-MSGV3
                MSG_V4    = SYST-MSGV4
           EXCEPTIONS
                OTHERS    = 1.
    ENDFORM.
    Hope this Helps you.
    Sumit

  • When printing Firefox does not open the Print Dialog window

    When printing at our office we often need to print to multiple printers and not just the default printer. When printing in Firefox, however, the print automatically gets sent to the default printer and I do not get a print dialog window. I have reset Firefox's printer options, changed the prefs.js file, and launched Firefox from safe mode to check if an add-on is affecting printing - all to no avail. When I print from Chrome, or (shudder) Internet Explorer I get a dialog box giving me printer options. Your help and responses will be appreciated.

    There is a hidden preference to bypass the dialog, but it definitely is not set by default. To check for that:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''print.''' and pause while the list is filtered
    (3) If you discover a preference named '''print.always_print_silent''' there's your trouble.
    Next question would be, where did it come from?! Some possibilities:
    (A) A user.js file that overrides prefs.js at startup. See: [[How to fix preferences that won't save]].
    (B) A lock file in the program folder. See: http://kb.mozillazine.org/Locking_preferences

  • When printing microsoft,  one note defaults as the printer can't print

    hos do I print to my default printer if one note always interfers.

    Hi,
    Please try (Windows):
    (a) Click Start,
    (b) Devices and Printers,
    (c) Right click the printer and Set as Default.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Error in Opening balances

    Dear All, while importing opening balances for inventory i am getting an error Internal Error(-5002) application or object defined error\ please help

  • Transfering files from computer to Playbook

    Every time I try to transfer pics or vids to my tablet I get a message that "Permission is needed  to perform this action".  It does'nt explain what it means or how to correct the problem. Help! Galley

  • How I can use a Bookmark?

    Hello, I would like to Know how I can use a Bookmark in the report. I am using the report builder. Thanks!

  • Unable to connect the external program.

    Hi Experts, We have schedule one job which run everyday. This job execute one external program. Now, this job get canceled everyday and the error is Unable to connect to target host Failed to start external program. The job log is as follows. Date   

  • How to order a Vector added?

    Let's say i hav this point system where i retrieved value from the DB and add the points. let's say the code is: int x = 0; int total = 0; while(x < vVector.size())   total = Integer.parseInt(String.valueOf(vVector.get(x))) + Integer.parseInt(String.