When saving new bookmarks selecting chooose does not show any files
in firefox 3.6.6 when saving new bookmarks the choose option does not show any files.
have tried disabling extensions but no effect
Try http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
Similar Messages
-
my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?
There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.
-
I am having trouble moving my music to my new computer. I have enable homeshare. it does not show any files in my homeshare. How do i get them out of the normal files into home share
Welcome to the Apple Community.
The following article(s) may help you.
Moving your iTunes library to a new computer -
External Drive Does not show any file in finder
I do not see any file in my external hard drive. It a 2TB hard drive and in info it shows 727 GB remaining. I am sure files are there but for some reason they are not showing in finder. I am using iMac 10.6.8
How does this relate to iPhoto? You'd best ask your question in the Show Leopard forum as it's more a system/hardware issue.
OT -
After I installed the latest OS X Yosemite my USB drive is not loading any files or folders which is located in it. Sometime it just show a blank window and sometime it shows folders and files but not clickable.
I have same problem but didn't find solution… If I put USB drive no files shown on finder… But If I use ForkLift files are showing but only in Forklift…
Need some clue how to fix it... -
View RX neighbors for selected radio does not show any information
For some but not all of our WLCs, our WCS is not able to View RX neighbors for selected Radio in the maps.
WLC is running 4.1.171-code, WCS is using 4.1.83 Base+Location.
I use Monitor-Maps, slecet a map and hover with my mouse over one of the APs to select "View RX-neighbors".
The error-message appearing is:
"There are no RX neighbors for selected radio."
Who knows help about this ?Hi. I've run into this before with one 1242 AP in LWAPP mode. I was running 4.1.171.0 on my 4402 WLC. I had users report a dead spot in the plant and when I looked at the heat map it told me the following. The A radio was not detected. The BG radio was detected but did not have any client counts on it. Also when I told the AP to view RX neighbors it said that there were no RX neighbors for the selected radio. I thought the AP had a hardware failure due to the fact that the 1242 doesn't have the modular radios like the first gen 1200's. So, I had the unit replaced with a brand new one. When I had the chance to TFTP recover the original, the A radio was detected again. I converted the AP back to LWAPP and it worked without any issues. I attribute this to a bad LWAPP upgrade / code corruption. I'd recommend to TFTP recover one of the AP's and set it back up again in LWAPP mode to see if the problem is resolved. Hope this helps!
-
Opening from"Open Recent" does not show any files. Help!
Every time I start IBA the splash screen shows up the templates available. At the bottom of the screen there is an option to "open recent" files. The same at the "file" menu on the top menu bar. I see no file records in either one. I always have to use the simple "open" command and search for the files, where they are stored. This is rather annoying as I would prefer to be able to open from "recent" as you are supposed to be able to do. Please, give me some advice if I need to change something in the settings (I could not find any preferences allowing me to do this either.)
It might be best to contact Apple for support so they can make sure you don't remove something otherwise important
[email protected]
…support phone number call +1 (877) 206-2092. -
Match code in report selection screen does not show any values for 0FISCPER
Hi Experts,
I have problem with selection screen in several reports. When I use match code for fiscal period selection I get only # as a possible value. I have checked the master data they seem to be correct. I work with 7.0 BW system. Can you please give me any hint what I should check?
Thank you,
MichalHi,
maybe I ask different way - how do you add characteristic values for a characteristic in the BEx? Is it automated somehow in SAP (e.g. from master data)? For the fiscal period I use custommer exit to fill in the default value, which is the current fiscal period. But this is something different, right?
<removed by moderator>
Michal
Edited by: Arun Varadarajan on Nov 14, 2008 3:55 PM -
I have installed and uninstalled several times with no success. I had a previous version installed in April 10 but it will not reinstall or run. This problem started about a month ago, in early July.
moirl wrote:
5. I can not get anything off the Blackberry (photos etc.).
As was stated above:
1. Go to Options >> Media Card (or Memory)
(some themes or BlackBerrys may call this "Settings >> Media Card")
2. Check the following settings (if they are not listed this way, then change to reflect the following:
a) Media Card Support: On
b) Mass Storage Mode Support: On
c) Auto Enable Mass Storage: Yes
3. Save the settings and exit
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I am asking you this because I did not find this problem in any of the other browsers I have (chrome, opera, ie, safari).
I uploaded a simple html file to show this problem here: http://rvyu.com/mKLG
Notice that if you don’t change the language you have no problem changing the value in the select element (the original one with 3 options, not the one generated by google translate) but if you do when you switch values the selected one does not show up.Ok thank you so much, for your timely response.
RESPONSES:
1) When I set up my iMac, I did not transfer any data directly from my windows PC. I simply used the same iTunes login and account. I have access to all of the files via the "Purchased" section of the iTunes store. If I click "Download Previous Purchases" text, I can download ALL of the purchases I have ever made.
2) I have the Apple TV 2, so good news, question answered. I thought maybe it was the Apple TV 1, but it is the Black model, so bam. Good response for you. Well the whole damned reply is an awesome response, just pointing out that one piece of awesome. I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
QUESTIONS:
3) So can my iMac not stream the data directly from itunes, without download? Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
SERIOUSLY.... THANK YOU...
I work in the computer support section for the Military. The only problem is we use Windows , lol. Well that and i've been gone for nearly 6 months on recover. I go back next month though I hope. But working in that field gives me the abilty to judge responses that run inside the same vein. Your response was so awesome that I half thought I might have written it myself. -
I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.
Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara -
I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments. -
I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.
Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print -
When I "enhance" a photo, it does not show up in slideshow, it is just black
When I "enhance" a photo, it does not show up in slideshow, it is just black. I am using Iphoto. I also can't email these "enhanced" photos.
There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
My Library (History/Show All History) does not show ANY History - only Tags & "All Bookmarks". What settings do I need to adjust to have this show. Nothing in the Options/Privacy seems to be relevant in English
Lightning is a problem for you because it hooks into Thunderbird at a low level and you need a version compiled for the platform Thunderbird is running on. So you can't do the preferred solution, which is to put your whole profile in a shared folder and have both instances of Thunderbird reference the same profile. (Ditto for Enigmail). Lightning may become an integral part of Thunderbird in an upcoming release, at which point this limitation due to Lightning should disappear.
And if you can't use a shared profile, you can't set your Lightning, or your Address Book, to share a common set of files. Put another way, the linkage from Thunderbird to its address book files and calendar data is hard-coded, and not exposed where we can adjust it. :-(
The halfway house is to place your mail stores in a shared place, and use the Local Directory setting in each account's settings to connect to it. They don't need to be in the profile; what's more important in your case is that they are in a folder accessible to both operating systems.
Look in your profile; everything under Mail and ImapMail needs to be moved out to a shared folder. Note the entries in Thunderbird under Local Directory before you do this, and reconstruct those pathnames in Thunderbird, but adjusted to suit their new locations.
(You can see here that you need to make many adjustments, one per account, in each instance of Thunderbird, so it's a high-maintenance solution and this is why we don't recommend it when the alternative, moving the whole profile, is possible.)
I share address books and calendars between Thunderbirds on various computers (and my phone and tablet) by syncing to something in the cloud; Google Contacts and Google Calendar are my choices, using gContactSync and CalDav.
Having made the break myself some years ago, I'd recommend you break away from Windows. ;-)
Maybe you are looking for
-
Dear All, I'm trying to delete a master page but the option DELETE MASTER SPREAD is greyed out. It is not in use on any page, but still won't let me delete -- any idea why? InDesign CC seems to be very quirky! Small Town Gal
-
My Firewire HDD cannot use with Mac Mini
I have Firewire 400 HDD and it work well with my MacBook with firewire 400 port, but when I use it with Firewire 800 + logitech firewire 800-400 cable it not work correctly, sometime It can't see the hdd, sometime It see but I can't copy file from/to
-
I got this error when calling report from my form: FRM-93652: The runtime process has terminated abnormally Forms Session ID is WLS FORMS.formsapp.101 Here is the trace dump info : Last Trigger FORM/BLOCK/FIELD: FRM_ACTIVITY_QUEUE.BLK_ACTIVITY_QUEUE
-
ODP 9.2.0.7 and Database 10g (10.2.0.5)
Hello everybody. I wanted to know if it is possible to use ODP 9.2.0.7 against a 10g (10.2.0.5) database. Up to this moment, one of our customers has an application with a 9.2.0.7 database that uses the 9.2.0.7 ODP. Some years ago, the development te
-
Hello, we are migrating from version 11.1.1.3 to 11.1.2.3. A part of it is migrating to calc manager from HBR. Since we are used macros, the import of the generated xml from HBR resulted in BR's and associated templates. I have 2 questions for you gu