When saving Quicktime.mov from final cut it says error or memory full. I have 16tb of memory between 4 drives any insight?

when saving Quicktime.mov from final cut it says error or memory full. I have 16tb of memory between 4 drives any insight?

I've shutdown, restarted and opened project and saved again. but it still reads the same...

Similar Messages

TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
i need to submit this movie for uni project tomorrow.
any help/advice will help . thanks.

According to Crash Analyzer
-50 (QuickTime)
This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
good luck

Is iDVD compatible with quicktime movies from Final Cut Express 4?

I am trying to find out if iDBD can be used with Final Cut Express 4 output or is it just for imovie? If it can be used with FCE4 what is the extension. Thank you.

Hi
Yes - IF YOU DO IT RIGHT.
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R
Burn speed set
• I set down this to x4 (or x1)
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this eg .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

Exporting movie from final cut express4 direct to apple tv

How can I export my completed movie from final cut express 4 to apple tv? This will be my first attempt. I have looked at the forum but cannot find a solution. I am fairly new to computing, (oap)!

Welcome to the  Discussion Forums.
The easiest method would be to export using Quicktime conversion and select the 'movie to Apple tv' option from the resultant dialogue box.

I just updated my RAM and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.

I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
Here is the crash report:
Interval Since Last Panic Report: 5426204 sec
Panics Since Last Report:          2
Anonymous UUID:                    2DD57DDB-BB42-5614-395A-CA6225BDAFD9
Wed Mar 20 11:36:53 2013
panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb0eb950 : 0xffffff801aa1d626
0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
0xffffff81eb0eba00 : 0xffffff801aa435d2
0xffffff81eb0ebae0 : 0xffffff801aa663f7
0xffffff81eb0ebb20 : 0xffffff801aa67398
0xffffff81eb0ebc70 : 0xffffff801aa6887c
0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
0xffffff81eb0ebf50 : 0xffffff801ade182a
0xffffff81eb0ebfb0 : 0xffffff801aaced33
BSD process name corresponding to current thread: launchd
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000001a800000
Kernel text base: 0xffffff801aa00000
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 1070542822
last loaded kext at 707348380: com.apple.driver.AppleIRController    320.15 (addr 0xffffff7f9c53e000, size 28672)
loaded kexts:
at.obdev.nke.LittleSnitch    3908
com.apple.driver.AppleIRController    320.15
com.apple.driver.AppleUSBCardReader    3.1.0
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.iokit.SCSITaskUserClient    3.5.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.2.2
com.apple.driver.AppleUSBHub    5.2.5
com.apple.driver.AppleFWOHCI    4.9.6
com.apple.driver.AirPort.Atheros40    600.70.23
com.apple.driver.AppleUSBEHCI    5.4.0
com.apple.driver.AppleAHCIPort    2.4.1
com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
com.apple.driver.AppleUSBUHCI    5.2.5
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleACPIButtons    1.6
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.6
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
com.apple.iokit.IOUSBMassStorageClass    3.5.0
com.apple.driver.AppleUSBMergeNub    5.2.5
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
com.apple.iokit.IOUSBUserClient    5.2.5
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IO80211Family    500.15
com.apple.iokit.IOAHCIFamily    2.2.1
com.apple.iokit.IOEthernetAVBController    1.0.2b1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOUSBFamily    5.4.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.8.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    344
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.6
com.apple.iokit.IOPCIFamily    2.7.2
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3

There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
http://eshop.macsales.com/shop/apple/memory/iMac
http://www.crucial.com/

.Mov from Final Cut Pro not playing on PC

I've made a short video edited with Final Cut Pro. The file was saved as a .mov QuickTime movie. The demo looked great on a Mac but it has to go to people who only have PCs.
Loaded the demo onto the hard drive of the PC, but the demo is showing poor resolution. It Loaded the latest releases of QuickTime, tried putting QuickTime in safe mode, tried re-setting the screen resolution and tried using different PCs. Still get the same fuzzy screen. Even tried saving the demo in different formats from Final Cut Pro, but still no better.
Any suggestions? Thanks-- Foster

I have the same problem and need a good solution. On 2 seperate PC's. I believe (but don't know 4 sure) that it is something to do with Quicktime not using the Windows direct X environment.
You could try going into quicktime / Edit / preferences / quicktime preferences / advanced /tick the safe mode GDI only circle ... restart quicktime and try again.

What compression to use when Exporting HD video from final cut pro PAL setting

Hi there
I'm trying to export my HD video from Final cut Pro so that I can edit it in DVD studio Pro. I initially exported it on H.264 setting however it then gives me the message 'NTSC assets cannot be imported into PAL projects' It was edited with PAL setting so I think it must be the conversion but i'm not sure which option to use.....been really struggling to get the 1 hour footage under 4.5gb without losing too much quality...
Any advice greatly appreciated!
thanks

Just to add two suggestions.
1) Consider putting your four movies on two disks.
2) Bring your movies into Compressor and duplicate the stock DVD setting. In the Encoding pane of the Inspector, select a CBR and dial it back to around 6.2 to 6.5 Mbs. In Preview mark a small section and submit; you'll get 2 elementary streams, with m2v and AC3 extensions. Bring that into DVDSP and evaluate results. Adjust as necessary. (This is to avoid waiting out very long encodes and then having to start again from scratch if you get disappointing results.)
Russ

HT4623 When I download anything from app store it Says error code: 100

Please tell me how can I download because I know but it keeps on saying error code:1009

Make sure you have the correct country selected in Setttings > Store > Sign In > Country / Region
Your credit or debit card credentials must be associated with the same country where you reside.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article

How to export a movie from Final Cut Pro X?

Hi There,
I've been away from FCP for a while using Premier but I have an FCPX project that I need to export a preview from.
I've tried "Sharing" a YouTube movie but it wants an account so I tried using "Apple Devices 1080p". But I get no dialogue to save it and no feedback that anything is happening - nor do I know where FCPX actually saved it (assuming it exported it).
I also tried adding a new sharing destination but none of the destination options make sense - rather I didn't see anything I wanted to share to (DVD, BluRay etc).
I'm currently downloading the PDF manual but this seems like such a basic thing to want to do that I'm pretty sure I'm missing something simple - so thought I'd post here.
Put simply, how do I export a preview file to my desktop?

Or just export an H.264, which PC's can play back just fine, especially via the web. I've never had issues with my clients.
http://www.macprovideo.com/hub/final-cut/preparing-video-web-quicktime-compresso r
You can do H.264 direcly out of FCP X without going to compressor. You'll need to purchase "Flip4Mac" to export WMV files, which I rarely have to use for my PC clients. You can create a Bundle in your Share preferences to do it all in one operation, too.

QT 7.1.5 can't play QT movie from Final Cut Pro 5.1.4?!

I am editing a film in Final Cut Pro 5.1.4 on a PowerBook running 10.4.9.
But when I moved a QT movie from FCP's "capture scratch" onto my Core 2 Duo MacBook, QT only showed me a white screen and asked me to search for third-party updates/plugins.
To make things even stranger, I loaded the file into my MacBook's Final Cut Pro 5.0 and it runs in there flawlessly!
Since this file is a pure FCP Quicktime video, in HD (Codec: HDV 1080i50, Integer (Big Indian), Timecode), I am very surprised that Quicktime won't play it - and that FCP will...
Is this perhaps due to the fact that my MacBook doesn't have the Universal binary FCP 5.1.4 installed?
I'd appreciate any help I can get.
Thanks!

Great! Thks David..I have not come up against this prob yet,but as I am progressing along a long edit,no doubt,I will..Your tip is extremely helpful.Thanks again from Australia.

Cannot play mov from final cut pro

Hi out there,
I received three mov videofiles with exactly the same length of 2.097.152 KB. This is a playout from a final cut pro editing system.
When playing one of these files with quicktime 7.1 on a Win XP system there is a -2048 error message: "not a video file".
It seems that the files are packed/compressed before from a bigger movie. Do you know which software will pack/unpack those mov files or how to view?
Thank you in advance,
Dave H.

the source is FCP<<</div>
That still doesn't say what the specific format the files are ... FCP can export to MANY, MANY QT (and other) codecs/formats. See if the files will play on a Mac. If so, while open in QT Player, hit Command j, then look to see what the specific codec is. It may just be a problem of not having the needed codec installed on the Windows system. Also, most Windows systems will require that the file has an extension in order to play properly.
-DH

Issue w/Quicktime export from Final Cut Pro 4.1

I've exported my sequence to a Quicktime movie. For some reason there is white bar across the top of the Quicktime with the text "<cut>" in the center. I went into the project to make some edits, exported it...and this happened. I'm not sure where this white bar came from or what it means.
Does anyone know what I may have done to create this funky white bar on the top of my quicktime movie? The movie plays fine...it just shows that white bar on every frame except my title sequence at the beginning. Is there a way to remove it and if so how? The white bar doesn't show up on the Canvas or viewer when I play it back within in FC.
HELP!

Ya this is some sort of issue with markers (it's been a long time since I've seen this). Try opening the file in quicktime player and go to movie properties and see if there's some kind of track besides video or audio and see if you can turn off the enable box.

Error -108 in quick time x when I share movies in Final Cut Pro X

HI,
PLEASE NEED HELP!!!!
After install LION a problem came out when I try to "share" my proyects, the funny thing is that only fails when I "share" to iPhone and iPad!, when i "share" to MAC and PC (1080p) it works wreat. the ERROR CODE -108 from QUICK TIME came out.
I found that -108 means 'out of memory' but in my case is not possible (i think). I reinstalled the FCP X but the problem remain.
I want to reinstall Quick time X but looks like it can't be unistalled, so any idea?
Thanks!
My MAC PRO 2010 setup:
-2 x 2.93 GHz 12 core
-48 Gb RAM OWC
-4 internal Hard Drives:
      -OWC EXTREME 6G SSD 120Gb ( here is installed LION, Final Cut Pro X, Compressor, etc and I use it for my currect FCPX proyect only) 40Gb used, 80Gb free space
      -Original Apple HD 7,200RPM 1Tb (iTunes library)
      -Original Apple HD 7,200RPM 1Tb
     -BARRACUDA 7,200RPM 3Tb   (EVENTS and PROYECT are here) 600Gb used
-Graphic Card HD5870
Thanks for your help!

What is the exact spec of the clips that cause the problem?
(Open one of the files with QuickTime and press Cmd+i to open the Inspector - then report back with the what it says).
Andy

Saving quicktime movies from internet

i used to be able to choose file,save as & whatever quicktime movie i had viewed & chose to save would end up in the proper place. now, i go through all the same steps & the movie/file gets saved but when i try & open i get an ALERT:
QuickTime cannot open the file: "01.mpeg"
it is not a file that QuickTime understands (-2048).
is there an easy way to save movies from the web anymore?

i didnt need it before. i think it all changed the last QT update i ran. HELP feature said to ckick down button on player, did that & yeah, it looks like it leads me to a purchasing link. thanks for your time. i guess all i can do is save as a bookmark & wait for it to load when i want it.

When you "Send Movie to Final Cut Pro" and you cancel Rendering and how

I am moving from iMovie to Final Cut Pro and have multiple movies to send to Final Cut Pro. I would like to cancel the rendering in FCP until I actuall need it.

Uncheck Background Render:
Al

When saving Quicktime.mov from final cut it says error or memory full. I have 16tb of memory between 4 drives any insight?

Similar Messages

Maybe you are looking for