When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

Glad you found the answer.  But something seems wrong.  FCP should be able to assign the scratch disk to your startup drive.  It's not advisable, but it should be possible.  You might want to try and figure out what's going on before what ever's going on cause other problems.

Similar Messages

  • I have calibrated with spyder4elite and now my blacks are tinted red, how do I fix this?

    I have been using spyder4elite to calibrate my iMac monitor and until now the black and whites have been fine, but now my blacks are tinted red.  Does anyone know what I might have done wrong?  I recently purged my cache - could that have changed something? How can I fix it now?
    Thanks in advance if anyone can help me.
    Jano

    Confirm that you have the latest drivers for the Spyder, 4.5.6. The release notes state that earlier releases had a problem with color cast on some systems. Then run the calibration again. If you continue to have problems, you may want to take this issue up with Datacolor technical support; it's possible that your calibrator is defective, or they may have tips.
    Regards.

  • I download the aol screen on foxfire and now I want to remove it, how do i do this. I can't play my pogo games now, i could play them this morning and after i did this can't get on.

    I download the aol screen on fox fire and now i want to remove it, how do i do this? I can't play my pogo games now, i could play them this morning and after i did this can't get on on either aol or foxfire. OMG please help.
    [email protected]

    To get any add-on or plug-in off Firefox:
    1. Type Ctrl+Shift+A
    2. NoScript will either be under 'Extensions' or 'Plugins'
    3. Once you have found it, click the 'Disable' or 'Remove' button (whichever you want to use).
    4. And you never have to put up with NoScript again!
    '''If this was the answer you were looking for, please click 'Solved' -- Thanks.'''

  • Macbook Pro - All app updates and newly installed apps disappear after shutdown, how do i fix this?

    All app updates and newly installed apps disappear after shutdown, how do i fix this?

    Hello Masterklaus69,
    Thanks for the question. After reviewing your post, it sounds like there is a lot of data in the Other catagory. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    OS X: What is "other" space in About This Mac?
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I want to open a radio file that is .rm.  I get a message that says I need additional Quicktime software, but I cannot locate what I need to download on the QT website.  Anyone got ideas about how I can open this file?

    I want to open a radio file that is .rm.  I get a message that says I need additional Quicktime software, but I cannot locate what I need to download on the QT website.  Anyone got ideas about how I can open this file?

    Hi bert,
    the ".rm" extension is created by 'Real Media' application.
    The easiest way to use it is to install the 'Real Media' player:
    1. RealPlayer BBC.app
    2. RealPlayer 12.app
    I have both installed & use them sometimes.
    (The 'BBC' wersion doesn't have any adverts with-in the app.)

  • HT1430 my daughter has forgotten her password on her ipod how do we fix this so she can use her ipod again

    my daughter has forgotten her password on her ipod touch how do we fix this so she can use her ipod again

    Just re-dock the ipod in the computer it is normally synced with and choose to restore ipod. Read more detail here - http://support.apple.com/kb/HT1339

  • When I try to add a photo to my iPhoto library from Safari I get a message that says Safari can't communicate with afar. How do I fix this so I can just add photos direct to iPhoto?

    When I try to add a photo from and email in Safari, I get a message that says could not add photo Safari cannot communicate with iPhoto.
    How can I get them to communicate? Or, more to the point, how can I get a photo from Safari (usually attached to an email) into iPhoto library?

    iPhoto is 7.1.5
    That's much too old. To solve the problem, you'll have to uninstall iLife completely, then upgrade to the current version of iPhoto in the App Store.

  • I have a bigpond email account and can receive emails on both ipad and iPhone. I can receive on th iPhone when on 3G. When I connect either to a wi if network I cannot send emails. Get a message that says my email address is rejected by the server.

    I have both iPhone and iPad that will not send emails when I am connected via wi if. Have tried three wi if networks. I get a messag that says the sender address (my address) was rejected by the server. Any ideas on what I need to do?
    Rusty

    Hi and thanks again for trying to help.
    Definitely works ok from pc.
    Have deleted and re-established account a few times now but still the same.
    I have actually given up and added gmail account which is working fine.
    Sends and receives no problem.
    Bloody bigpond....
    We are not remote at all. Sitting in the fantastic Pavilion Hotel in Phnom Penh. Another couple here having trouble but not bigpond. Hotel staff have tried to help but to no avail.
    Giving up and stick with gmail until we get home then start trying to get resolution.
    Problem actually existed on a personal wi fi network in Melbourne before we left so I should have tried to resolve it then.
    Thanks again for suggestions.
    R

  • When I click on "Sign in to Sync" the page "about:accounts" shows error "The URL is not valid and cannot be loaded." How do I fix this so I can use Sync?

    When I click on the three-bar icon (top right) and then on "Sign in to Sync" a new tab opens attempting to load "about:accounts" . . . the page that loads is an error . . . "Problem loading page" shows up on the tab and the page displays:
    The address isn't valid
    The URL is not valid and cannot be loaded.
    Web addresses are usually written like http://www.example.com/
    Make sure that you're using forward slashes (i.e. /).
    Try again
    I am running Firefox 30.0 on a Dell XPS-18 and Windows 8.0.
    I cannot access "about:accounts" at all. How do I fix this?

    The about:accounts page is a valid page in the current Firefox release.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • My Safari did updates and now it will not open. How do I fix this?

    My computer did updates about a week ago and ever since then the internet will not open. It says it downloaded safari 5.1.1, when I try to open safari it comes up with a message saying the community toolbar does not support the version I am using.
    How do I fix this so that I can have internet?

    This may help you What you can do if Safari quits unexpectedly

  • I removed my /Applications/Safari.app/Contents/Resources/.VideoCaptureFactory.* files and now Safari will not open. How do I fix this?

    Hi,
    In a stupid attempt to "fix" my computer, I removed my /Applications/Safari.app/Contents/Resources/.VideoCaptureFactory.* files (one was a .png and the other was a .xls).
    I followed these steps:
    Manual Removal Instructions
    1. Run the following command in Terminal:
    defaults read /Applications/Safari.app/Contents/Info LSEnvironment
    2. Take note of the value, DYLD_INSERT_LIBRARIES
    3. Proceed to step 8 if you got the following error message:
    "The domain/default pair of (/Applications/Safari.app/Contents/Info, LSEnvironment) does not exist"
    4. Otherwise, run the following command in Terminal:
    grep -a -o '__ldpath__[ -~]*' %path_obtained_in_step2%
    5. Take note of the value after "__ldpath__"
    6. Run the following commands in Terminal (first make sure there is only one entry, from step 2):
    sudo defaults delete /Applications/Safari.app/Contents/Info LSEnvironment
    sudo chmod 644 /Applications/Safari.app/Contents/Info.plist
    7. Delete the files obtained in steps 2 and 5
    8. Run the following command in Terminal:
    defaults read ~/.MacOSX/environment DYLD_INSERT_LIBRARIES
    9. Take note of the result. Your system is already clean of this variant if you got an error message similar to the following:
    "The domain/default pair of (/Users/joe/.MacOSX/environment, DYLD_INSERT_LIBRARIES) does not exist"
    Is there a way to update my db to not look for this or did I remove something crucial to the functioning of Safari? I feel like an idiot.
    Thanks for any help.
    Sincerely,
    Sterling MacNay

    You installed a variant of what’s commonly called the “Flashback” or “Fakeflash” trojan, although the names are obsolete.
    If you’re certain you know when that happened, and you back up with Time Machine or something similar, you can save yourself a lot of time by restoring your whole system from the most recent snapshot taken before it was infected. Then take Steps 7, 8, and 10 below.
    How can you tell when the infection took place? All you can be sure of is that you were infected some time before the problems started. You may have visited a blog that prompted you to install some kind of software, or a “certificate.” You entered your administrator password when prompted. If you remember doing that recently, mention it in a reply, but don’t post a link.
    If you don’t know when you were infected, there's no easy, reliable way to remove the malware, because it's constantly changing. There are differences of opinion on this site as to the best of course of action, so you should do your own research before deciding how to proceed.
    I suggest you take the following steps:
    1. Back up all data to at least two different devices, if you haven't already done so.
    2. Boot from your recovery partition (if running Mac OS X 10.7 or later) or your installation disc (if running an earlier version of the Mac OS), launch Disk Utility, and erase the startup volume. This action will destroy all data on the volume, so you must be sure of your backups.
    3. Install the Mac OS.
    4. Reboot and go through the initial setup process to create an account with the same name as your old one. Don’t import anything from your backups at this stage.
    5. If running Mac OS X 10.6.x or earlier, run Software Update. You may have to run it more than once to fully update your system.
    6. Restore the contents of the top-level subfolders of your home folder except “Library” from the most recent backup. The Library folder may contain components of the malware. It’s best not to restore anything from there. If you must do so, restore only files, not whole folders with all their contents, and only if (a) they’re visible in the Finder, and (b) you know what they are, and (c) they haven’t been altered. Don’t restore anything in the home subfolder Library/LaunchAgents, if it exists, or any hidden files or folders, no matter where they are.
    7. If you’re running Mac OS X 10.5.8 or earlier, launch Safari and select Safari ▹ Preferences… ▹ Security from the menu bar. Uncheck the box labeled Enable Java. Because of known bugs, Java in those OS versions is unsafe to use on the Internet. (Note: I’m not referring to JavaScript, which is unrelated to Java, despite the similar names.) If you’re running Mac OS 10.6.8 or later, you should still disable the Java web plugin unless you really need it. Few websites have legitimate Java content nowadays. If you encounter one that does, enable Java temporarily.
    8. Change every Internet password you have, starting with banking passwords. Check all financial accounts for unauthorized transactions. Take this step only after you’ve secured your system in the preceding steps, not before.
    9. Reinstall your third-party software from fresh downloads or original media, not from backups which may be contaminated.
    10. If you use any third-party web browsers, disable Java in their preferences. As with step 7, this step is mandatory if you’re running any version of Mac OS X older than 10.6. Otherwise it’s optional, but recommended.

  • TS1702 I have three apps that I tried to update and now they are stuck in waiting how do I fix this

    I have three apps that I tried to update and now they are frozen any ideas on how I can fix this

    You can try any or all of these suggestions that have worked for others in the past .... But ... YMMV.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
    If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

  • Installed FF4 and now my TouchPad no loner works, how do I fix this?

    I installed FF 4 on my Lenovo ThinkPad T61 and now my TouchPad & TouchPoint cannot be used to scroll web pages (they do however work on other programs). I installed the latest driver for the TouchPad & TouchPoint but it did not fix the problem. I also restarted FF in safe mode with Add-on disabled and this did not help either. I can scroll using the arrow key or with the curser, but it's VERY annoying not being able to use the TouchPad & TouchPoint. How can I fix this?

    Confirm that you have the latest drivers for the Spyder, 4.5.6. The release notes state that earlier releases had a problem with color cast on some systems. Then run the calibration again. If you continue to have problems, you may want to take this issue up with Datacolor technical support; it's possible that your calibrator is defective, or they may have tips.
    Regards.

  • HT3529 I have my imessage turned on and i have full WiFi signal and it still wont send as imessage. how do i fix this?

    i have my imessage turned on and have full WiFi signal and my imessage still wont work. how do i fiz this problem?

    Start here:
    http://support.apple.com/kb/ts2755

  • I have a pavilion dv4 and my internal microphone is not working. how do i fix this. thanks

    I have a pavilion dv4 and the internal microphone is not working.  I believe I had it working for 1 time but can;t figure it out.  please help. thanks

    Hi,
    Please check it using these steps:
    1. Right click the iocon speaker (bootom right hand side)
    2. Select "Recording Devices"
    3. Enable the microphone
    Hope this helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for