When starting up my MacBook it tells me no Wifi no hardware installed
Just wondering if anyone can please help as I am going no where fast. The computer was working for me last night and now I turn it on and the thing is telling me that there is no wifi installed??? Frustrating because I had apple store look at this once before ..
Test after taking each of the following steps that you haven't already taken. Back up all data before making any changes.
1. If you can connect to the Internet via Ethernet, Bluetooth, or a USB network device, make sure all available OS X updates are installed. If Wi-Fi is your only means of network access, skip this step.
2. Reset the NVRAM.
3. Reset the System Management Controller.
4. Boot into Recovery. In the menu bar of the OS X Utilities screen, there's a Wi-Fi menu. If it works, select Install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
5. Take the machine to an authorized service center for testing.
Similar Messages
-
MacBook Pro 17" Mid 2010 wifi "no hardware installed" fix
Hello,
Wanted to share my "wifi: no hardware installed" fix for my 17" mbp. Story is short - some time ago I noticed that sometimes after sleep there is no wifi. I'm carrying my laptop with me every day in backpack, so it just won't connect to any known network when I open it. Only reboot helped. I tried all available solutions with no luck - no matter what I do, I must reboot it every time I need wifi. Last month it stopped working completely. First, empty wifi icon, I can't turn it off or on. Finally, after reboot it said "no hardware installed". Quick googling points to dead wifi card. So, I opened laptop to see what card I have to order it online. Guess what happen, when I assembled it back? It worked! But only while it was on a table. As soon as I took it with me - it stoped working. So, I opened it again, re-seated cable from m/b to wifi card and that worked again, until next trip in backpack. So, it seems this cable becomes loose and disconnect after some vibrations. Then I put two small pieces of rubber tape (used to seal windows, very soft) on each side of cable. It's high enough to keep connector in its place when you close cover. See attached pictures. Be careful and don't put too much here - otherwise when you close cover it will damage m/b and wifi card.
So, if you're carrying your mbp all the time in backpack and wifi sudden disappear saying "no hardware installed" may be this fix will help. Note, this fix only for mbp mid 2010. I have no idea, what happen in other models. And if you're not sure - take it to service.
Before:
After:Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best. -
After I upgraded my MacBook to OSX 10.9.1, the wifi does not work only the ethernet port works.
I check the WiFI setting, it complain with error message as follows "Wi-Fi: No hardware Installed".
Pls advise what is wrong and how to resolve.
ThanksFirst thing I'd do is shutdown the machine fully (that means use 'Shutdown' not 'Restart' from the menu), then power on.
If the problem persists, reinstall OS X from the recovery menu (power on, immediately hold down 'command-R' and choose 'Reinstall OS X' from the panel menu). -
10.10.3 - problems when starting up my MacBook Air
Hi, I have a MacBook Air 2013 and I have installed the update to Yosemite 10.10.3. Since then, my Mac is having problems in starting up... in fact, after pressing the start button, my Mac is giving the starting sound and then nothing else. I have to press two more times the start button to start my Mac as normally. Any idea?
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and reinstall the OS X Yosemite 10.10.3 Combo Update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
When I bootup my Macbook my family's PCs wifi connections stop working !
Hi everybody, when my nephew boots up his Macbook (Snow Leopard 10.6.5) he can regularly surf the web through a wireless router. However the wifi connection on other devices (Windows Vista notebook PCs, Linux Pcs, Windows 2000 PC, Playstation 3 wireless, PSP, Xbox ecc.) stops working. When he shuts off his Macbook, wifi connection on Windows/Linux PCs etc. starts to work again.
I've had similar issues only with a wireless TV signal transmitter (working at 2.54 GHZ). When it is on, wifi connection is impossible, no matter what channel is selected (it has 4 channels).
What to do with my nephew's Macbook? I can see that every 10 seconds Airport is searching for wireless signals (the wifi led on the router blinks), but no other traffic is sent/received so I don't think it's a bandwidth problem.
Can Airport be shut off and can I connect to wifi router without airport using other apps or using a terminal (console) application (I use Linux and many commands are the same, i.e " iwconfig - ifconfig ")?
Maybe it's the transmitting power of MAcbook wifi device (too strong?). Can it be modified? I'm not a Mac guru... In linux there is a command, say "iwconfig wifi0 txpower 20mW " to tell the wifi driver to use 20 mW transmitting power on wifi0 device. In that Macbook the wifi device is called "en1"...
Many thanks in advance for good ideas..!Many thanks for such a fast answer!
@ a brody
I have so many wifi devices (at least 17) I don't want to create a MAC address filtering rule for each one of them! I don't ever know if my router can accept filters on so many MAC addresses!! But I will try out your suggestion if I can't solve in other way.. Thank you!
@ J D McIninch
Thank you, I will try... However, my router don't need to be restarted to get online again: when my nephew shuts off his Macbook the wifi connection is all ok. How could it be that a routing table gets corrupted when the Macbook is on, and that very same routing table gets repaired as soon as the Macbook is shut down? I'm sure, however, my router is a pre-N one ( Belkin modem/router bought in 2004, 802.11 b/g 54Mb with 125Mb turbo mode feature always turned off for backward wifi compatibility)
Thanks -
Strange error message when starting ITunes, ITunes doesn't recognise devices for wifi sync
I have other wifi problems with my IMac running Mountain Lion but this is the most annoying. When I start ITunes it doesn't recognise that I have my IPhone 5 and my IPad 2 sitting connected to the same wifi network and waiting to sync.
In the Console I get this error exactly when ITunes starts up:
24/11/2012 12:56:36.038 genatsdb[220]: *GENATSDB* FontObjects generated = 598
24/11/2012 12:56:36.631 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 1
24/11/2012 12:56:36.633 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 2
24/11/2012 12:56:36.635 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 3
24/11/2012 12:56:36.637 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 4
24/11/2012 12:56:36.639 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 6
24/11/2012 12:56:36.641 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 7
24/11/2012 12:56:36.643 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 8
24/11/2012 12:56:36.644 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 9
24/11/2012 12:56:36.646 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 10
24/11/2012 12:56:36.648 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 11
24/11/2012 12:56:36.649 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 12
24/11/2012 12:56:36.651 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 13
24/11/2012 12:56:36.653 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 14
24/11/2012 12:56:36.655 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 15
24/11/2012 12:56:36.656 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 16
24/11/2012 12:56:36.658 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 17
24/11/2012 12:56:36.660 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 18
24/11/2012 12:56:36.661 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 19
24/11/2012 12:56:36.663 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 20
24/11/2012 12:56:36.665 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 21
24/11/2012 12:56:36.666 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 22
24/11/2012 12:56:36.668 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 23
24/11/2012 12:56:36.670 mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 24
24/11/2012 12:56:47.678 iTunes[239]: AVF KeyExchange Version from driver for Certificates 1
Google search has explained to me that this is related to Bonjour but nothing further. I have done the 'usual' - booted in safe mode, repaired permissions, updated software, reinstalled Mountain Lion via Disc Recovery, restarted my modem etc.
Before I just wipe the hard drive and start again from scratch, maybe there's something obvious I'm not doing? Every other device in the house (2 x Iphones, 2 x Ipads, 1 Apple TV, 2 wifi radios and 1 other IMac desktop) have no problems with the wifi network.I am having similar issue. Getting these same 24 error messages everytime I start iTunes. Sharing is already off.
5/9/13 8:20:04.107 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 1
5/9/13 8:20:04.109 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 2
5/9/13 8:20:04.111 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 3
5/9/13 8:20:04.113 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 5
5/9/13 8:20:04.115 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 6
5/9/13 8:20:04.117 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 7
5/9/13 8:20:04.120 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 8
5/9/13 8:20:04.122 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 9
5/9/13 8:20:04.124 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 10
5/9/13 8:20:04.125 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 11
5/9/13 8:20:04.127 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 12
5/9/13 8:20:04.129 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 13
5/9/13 8:20:04.131 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 14
5/9/13 8:20:04.133 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 15
5/9/13 8:20:04.135 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 16
5/9/13 8:20:04.137 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 17
5/9/13 8:20:04.140 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 18
5/9/13 8:20:04.142 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 19
5/9/13 8:20:04.144 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 20
5/9/13 8:20:04.146 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 21
5/9/13 8:20:04.148 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 22
5/9/13 8:20:04.150 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 23
5/9/13 8:20:04.152 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 24 -
Error when starting the JC00 after the completion of the WEB AS 640 instal.
Hi,
After successful completion of the Web As 640 Installation on HP-UX, I am not able to start the JC00 and getting the following error.
sapweb:ep1adm 36> startsap
Checking db Database
ABAP Database is not available via R3trans
Checking db Database
J2EE Database is not available via test
See logfile JdbcCon.log
Starting SAP-Collector Daemon
12:19:32 09.08.2005 LOG: Effective User Id is root
This is Saposcol Version COLL 20.87 640 - hpxOscol 07/2003
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 1087) is already running .....
saposcol already running
Running /usr/sap/EP1/SYS/exe/run/startj2eedb
Trying to start EP1 database ...
Log file: /home/ep1adm/startdb.log
/usr/sap/EP1/SYS/exe/run/startj2eedb completed successfully
Starting SAP Instance SCS01
Startup-Log is written to /home/ep1adm/startsap_SCS01.log
Instance on host sapweb started
Starting SAP Instance JC00
Startup-Log is written to /home/ep1adm/startsap_JC00.log
Startup of Instance failed
See /home/ep1adm/startsap_JC00.log for details
startsap_JC00.log is
Trace of system startup/check of SAP System EP1 on Tue Aug 9 13:30:24 EDT 2005
Called command: /usr/sap/EP1/SYS/exe/run/startsap
Starting SAP Instance JC00
SAP-R/3-Startup Program Rel 640 V1.8 (2003/04/24)
Starting at 2005/08/09 13:30:25
Startup Profile: "/usr/sap/EP1/SYS/profile/START_JC00_sapweb"
(4439) SETENV LD_LIBRARY_PATH=/usr/sap/EP1/JC00/j2ee/os_libs:
Setup Environment Variables
(4439) SETENV SHLIB_PATH=/usr/sap/EP1/JC00/j2ee/os_libs:/usr/sap/EP1/SYS/exe/run:/usr/sap/EP1/SYS/exe/runU:/usr/sap/EP1/JC00/j2ee/os_libs:/oracle/EP1/920_64/lib:/oracle/EP1/920_64/lib32:/oracle/EP1/920_64/lib:/oracle/EP1/920_64/lib32
(4439) SETENV LIBPATH=/usr/sap/EP1/JC00/j2ee/os_libs:
Execute Pre-Startup Commands
(4439) Local: rm -f jc.sapEP1_JC00
(4439) Local: ln -s -f /usr/sap/EP1/JC00/j2ee/os_libs/jcontrol jc.sapEP1_JC00
Starting Programs
(4446) Starting: local jc.sapEP1_JC00 pf=/usr/sap/EP1/SYS/profile/EP1_JC00_sapweb
(4439) Waiting for Child Processes to terminate.
(4439) **** 2005/08/09 13:30:31 Child 4446 terminated with Status 66 . ****
(4439) **** No more Child Processes to wait for.
(4439) Parent Shutdown at 2005/08/09 13:30:31
Execute Post-Shutdown Commands
(4439) Exiting with Return-Code 3. (No more child processes)
Startup of Instance failed
I was able to start and stop the SAP before i took the backup but after the backup i am not able to start the SAP.
Thanks,
SandeepJ2EE Database is not available via test
See logfile JdbcCon.log
Please see the log file.If it says password expired .Please change the password for the schema user of J2ee database.In my case the user is sapdbqx1 and after resetiing the apssword it worked fine.
Also onetime for annother system in XI Landscpe I had same issue.
Solution: The listener file should have both logical hostname as well as physical host name entry.Then its worked.
Sudhakar -
"Wifi: No Hardware Installed" Macbook Pro 10.7.5
My Macbook has recently been having issues with the Wi-Fi. I had faulty hardware and had it replaced. After I got it back the wifi worked fine for about two weeks but then it started having issues again. I took it back in and they whipped the hard drive so I took it back to my schools IT and they installed our eduroam wifi software as well as microsoft office programs. They then dualbooted my computer with a windows side. Everything worked for a few days but now It says no hardware is installed. I have ran a hardware check(option+D, extended test) and it says everything is fine. I dont know what to do. Please help me!!!
Sorry, but not sure what your question has to do with an Apple router.....the AirPort Express, AirPort Extreme or Time Capsule. One of these devices:
http://www.apple.com/compare-wifi-models/
You will likely receive a much faster and more informed answer if you post your question in the MacBook Pro community support area. The link is just below:
MacBook Pro -
MacBook Air (Late 2008) WI-FI no hardware installed
Last week all was well...On Friday I learned that the FBI turned off servers that were responsible for DNS changes. I now believe that I was using a rouge server. My wifi no longer works. I have rebooted and reset the PRAM and NVRAM as well as resetting the SCM.
I have Lion 10.7.4 for an OS.
Any ideas short of a trip to Apple???
Thanks in advance...You have made a great effort to help me with this problem. Unfortunately the first thing the recovery does is try to get a broadband connection Without that connection the reinstall will not proceed.
So we are now taking the Mac to the Apple store for a look see.
Thanks again for all your time and effort. I will let you know what they say and do. -
Hi all,
WIFI of Macbook Air works when the notebook started with OS X.
But when I restart the Macbook Air with Win8, the Wifi does not work.
The Macbook Air was bought last month. It is new model. The wifi may be a/c.
Thanks,hey zyzzyxx, you're not the only one with this issue. it happens to me too. as soon as i unplug my cintiq via thunderbolt display my connection shoots straight back to having 20mbps down. i checked it using a speedtest.
ever find a fix for it? -
I cant get iCloud to open when starting pages
I cant get iCloud to open when starting pages with MacBook Air. How can I turn this option on?
Welcome to the Apple Community.
That feature is only available in OSX 10.8. You'll need to upgrade or use iCloud.com. -
"Not an executable or is a link" errors when starting Messaging Server
"Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem."Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem. -
I am a student and i cannot listen to my lecturer's online messages or watch his video
At one time often flash player needed special software to ensure it was uninstalled correctly, I do not think that is now the case.
*As a test go to this page: http://www.adobe.com/software/flash/about/
The above link will try to start a simple Flashplayer animation, tell you if flash payer is installed in the browser you are using, and what version is installed. What happens when you click on the blue link above ?
* see also [[managing the Flash plugin]] -
I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies. After starting it in recovery mode, it will not allow me to download OS X Mavericks- it says the disk is locked. Any ideas? I do not have a back-up and do not want to erase everything before I have explored my options. Help?
try forcing internet recover, hold 3 keys - command, option, r - you should see a spinning globe
most people will tell you to do both pram and smc resets (google) and if you still have issues, either clean install (easy) or troubleshoot (hard) -
My MacBook Pro tells me it's not charging when I connect the charger. What do I do?
My MacBook Pro tells me it's not charging when I connect the charger. Right now it's reading it, but other times it does not. What do I do?
Initiating a charge cycle is a costly and disruptive operation. It is only started when the benefit to battery life exceeds the cost to battery life of a charge operation. That is usually when the battery falls below 90 percent charged.
Maybe you are looking for
-
Reader 10.0 Printing Problem - Font changing while printing
Dear all, can anybody help me on my printing problem with Adobe Reader 10.0 ? While printing a pdf I cannot do anything else, it is not possible to touch the mouse because when I do this, the font is changing while printing to something like grecian.
-
Hi, I have a problem with formats when i put two criterias in union. I would like to put different formats in columns. In this post i sent XML code which has two parts. First is for declaration of columns and the second is XML for UNION which stand i
-
In safari I was not able to wish my frnds on their bdays in event section of facebook right top corner.. Is there any way to fix this..
-
so i'm just curious as to what you guys out there are using right now and for what -(as for plugins) besides the gazillion in logic that are already loaded, there's still a few programs out there that make it easier for us, for example! mine is melod
-
HT4914 Import music from ITunes Match
Several months ago I had to reformat my hard drive on my PC. I lost some music which is still on my iPod touch. I haven't been able to sync my iPod without losing music. Can I use iTunes match to upload music from my iPod and get it back onto my PC?