When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it
When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it.
I have been playing whole movies before from VLC without problems.
Any Ideas?
Welcome to the Apple Community.
Yes it's network issues or settings that cause these types of problems most of the time.
The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
Similar Messages
-
Reloaded Itunes on an XP machine. Reloaded because Itunes would not open. Now when I play a movie that is in my library, the movie plays for aprx. 60 seconds and then reverts back to my Itunes library. Does it with all movies in the library, Most where downloaded from Itunes. Any ideas on a cure?
This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
I have the MacBook Pro (retina, 13 inch, Mid 2014) Memoria 8GB 1600 MHz DDR3 and I want to increase the memory. What kind of memory do I have to buy?
The RAM in the retina model can not be upgraded.
-
In Itunes store, song preview plays for only 5-10 seconds and then stops. Songs in my Itunes library play entirely from start to finish.
My Itunes previews have been playing fully now for the past few days. After trying every suggestion possible to fix the problem of 5-10 second previews, I took the advice on one feed to use OpenDNS for your network internet connection. There are internet sites that will instruct you how to do it. Just Google "opendns for (your operating system)". I have Windows XP and followed a video instruction at www.top-windows-tutorals.com/using-opendns.html. Afterward, close your browser and then flush the DNS Resolver cache; Start/Run, type CMD in the open field, click OK, in resulting window type ipconfig/flushdns, press return on keyboard. No guarantees, but my browser is faster and my Itunes previews are playing fully so far. But I still shudder every time I hit the preview button.
-
This is incredibly frustrating - we had a IPhone 4s that had no problems here for about 7 monts. We have a new IPhone 4s and recently a new IPad 2. Ever since the mandatory switch to using the Podcasts App for iOS based products (my PC laptop works fine), the podcasts will say "cannot be downloaded at this time" and will stream for 30 seconds to a few minutes, then abruptly start over at the beginning. We cannot fast forward ahead properly in the new clunky interface, and the secondary screen where you get to see the "tape player" going through podcast does not skip when you move the timer icon anywhere in the podcast. It is though they are running in parallel.
We are talking podcasts by the BBC, NPR, etc and the Lenovo doesn't have any issues bc the whole system is inside ITunes.
I have looked all over the internet and cannot find a fix, please help.Hi jhyiesla,
Im not sure wether I got you right or not. But my advice/s would be as follows:
These steps help you get rid of old apps you downloaded years ago and you do not use anymore.(Also frees space on your mac after emptying the trash)
1) go to iTunes and delete all applications in it. Make sure to move them to trash! Do not empty your trash yet. Its your backup if step 3 doesnt appear.
2) connect both your devices(one after each other) and make a backup. !!!Dont press the Sync button, press the Back Up Now Button
3) Then it asks you if you want to backup applications as well. Confirm. (This is how apps get transferred manually)
4) Then Sync your devices... The first time it might be, that there are some additional apps loaded to your devices you dont want to.. delete them on your Device (not iTunes) and after that you should be good every time you sync again.
5) now you can empty your trash on your mac.
Further,
- You should regularly connect your devices with iTunes to make sure they are backed up. (Even if you have activated iCloud backup, the iTunes backup is more proper i.e.. Apps)
- If you hate scrolling through a list of apps in iTunes, you can re/install apps directly on iOS not via iTunes. I absolutely never go to the "Applications" section in iTunes. I install and delete apps directly on iOS.
jl -
After loading OSX 10.9.2, my printer is no longer recognized by my Mac. I have a Canon MG 7120 and it is connected wirelessly.
Try:
uninstall all printer manufacturer apps and "utilities"
go to System Preferences > Printers & Scanners > Print
control-click on your printer in the column on the left
select "Reset Printing System..." and "reset" in the dialog that follows
do a factory reset on your printer. You'll have to consult the printer manual for how.
power down everything: modem, router, computer, and printer
power up each item in turn in the same order: modem, router, computer, and printer. Let each power up completely before moving on to the next
enter your wifi password in your printer so it can connect to the network
go back to printers & scanners and it should see your printer and download a driver for it from Apple (if there is one)
if that doesn't work there are a few options
look on the printer manufacturer's website for an updated driver
see if Gutenprint for Mac OS X has a driver
see if your printer will work with AirPrint or a generic driver. See: OS X Mountain Lion: If the software for your printer can’t be found (the reference says Mountain Lion but it still applies for Mavericks.)
go back to Mountain Lion
get a new printer -
How do I use my Macbook pro retina display as a monitor for a PC?
How do I use my Macbook pro retina display as a monitor for a PC?
MacQueries wrote:
How do I use my Macbook pro retina display as a monitor for a PC?
Unfortunately, that is not possible. The computer only can "output" your display image, it cannot "input" an image from an external computer and display it on your MacBook's retina display. -
my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem? How can I fix it?
Hi freezebri,
The following steps may resolve your issue:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Selectbutton will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
Hope this information helps ...
- Judy -
Error (-42018) when trying to airplay from iMac to iPad2
When trying to airplay from itunes on my iMac to my new iPad2, it starts ... connecting... and gives me the error
"An error occurred while ... unknown error (-42018)."
Anyone know what that mean? They are on the same network and I can pick the ipad to from the "play on list."
Thanks in advance
edEdward Malloy wrote:
Chris, you are wrong.
No, I am not wrong but thanks for playing.
You need to install airframe
Perhaps you could have mentioned this in your first post because it is not a standard part of AirPlay.
Please don't answer questions, when you don't know the answer.
I do know the answer which is why I responded (though now I wonder why I did).
You should contact the author of Airframe instead of being rude.
and it does not seem to be in the (US) App store anymore. -
Can i do airplay from my Macbook pro to my appleTV????
can i do airplay from my Macbook pro to my appleTV????
No, AirPlay is for Apple TV. You can turn on home share on your MacBook and iPad so you can stream to your iPad.
-
My early 2011 Macbook Pro on start up has wifi, but drops it soon after and never comes back, AHT shows nothing wrong. Multiple wifi's tried and same on all. I have also re-installed OSX from scratch and still happens.
I have the same problem. I have a white macbook 2010, with mavericks os. I just found my mac not powering on and then I tried to run it on safe mode by holding the shift button but it will turn off seconds after I let go of the shift button. I am able to access the desktop and use it while holding the shift button the whole time. It's a bit slower than before but I figured maybe it's because of holding down shift button.
I went to the Apple Store to have them look at my mac and I was told it's a failed hard disk. I wasn't told why he was able to conclude that a failed hard disk is causing the problem, I was just told to get a replacement. But the thing is when I ran Disk Utility it says, "disk appears to be okay." So I also feel like it's possible it's not a hard disk issue because it's also the first time it happened. My mac was working perfectly fine before all this.
Do you know anything else that could cause this problem? Were you able to find out what's wrong?
Thanks. -
Hi Everyone,
This problem just started today. When I turn on or restart my Macbook Pro Retina 15" (Mid 2012 version), my screen is light gray like normal, and then after a few seconds my entire screen flashes completely bright yellow for a few seconds, and then it goes to the normal Welcome screen (where I choose to login as myself or a guest user). This suddenly started today and has not stopped since. This keeps happening every single time I turn on or restart my computer.
Yesterday I installed all the Mavericks and other updates that were available in the App Store, so I'm wondering if this is related to that since this never happened prior to my doing those updates yesterday. When I first installed the new OS X Mavericks (10.9.3) update, it went through the whole installation process (took about 10 minutes), and then during the installation I got an error message saying that it couldn't verify my iTunes application that was on my laptop, and then my laptop finished installing the updates. Then once my laptop restarted, the App Store "Updates" section said that I had to do the whole OS X Mavericks (10.9.3) and iTunes (Version 11.2) updates all over again. So my laptop did the whole installation again (took about 10 minutes, but this time I didn't get that "iTunes error message" during the installation process).
Now, when I go to the App Store "Updates" section, it says the following under "Updates Installed in the Last 30 days":
-Digital Camera RAW Compatibility Update (Version 5.05) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-Security Update 2014-002 (Version 1.0) installed April 22, 2014
I'm wondering if this flashing bright yellow screen upon bootup is related to the fact that my laptop installed the OS X Update and the iTunes Update two times each? Or is this new problem totally unrelated? It's just that this problem started a day after these 2 updates were installed twice.
My Macbook Pro Retina 15" (Mid 2012 version) is otherwise working fine at least as of now. The only issue so far is this flashing bright yellow screen every time I turn on or restart my computer.
If anyone could please help me fix this so that my bootup screen doesn't flash completely bright yellow anymore, I would be forever grateful!
Thank you so much for reading this and for any help you can provide.
hope everyone is well,
ElaineHey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine -
iMovie was removed from my macbook pro after I downloaded OS X Yosemite, I had it before and have used it, but now I can only get it through the app store. I can't pay for it so I would really appreciate the help.
Look in your applications folder for the installer - Install OS X Yosemite. Delete it. Then go back to the App Store purchases tab and see if you can download it. You might have to re-index Spotlight.
Spotlight – Re-index -
Two weeks ago Purchasing 60 songs from iTune store.So Two of them play only half of song and then jumping to another songs.What is could be?Looks like is not been downloaded full.Can i get this two songs to play correct?Many thanks Aleksejs!!!
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
My iPhone 4S has decide to stop playing any of my music. All my songs are there, but when I click to play, it just scrolls through a bunch of songs and then reverts back to the play list. Anyone have any suggestions as to how to correct this? Thanks.
I am having the same issue. And today, I noticed that when I was talking on the phone, the volume went down low. I had to reboot the phone, so that the volume was up again. Mostly, though, it's my music that I am having issues with.
Same issue as listed above. iPhone 4S. IOS6.
Maybe you are looking for
-
i have just updated the itunes on a laptop that is sharing my itunes. i ahve got an ipod touch and it has got different songs, etc on to the laptop, how do i transfer the library from the ipod to the laptop without loosing the entire library.
-
I imported my 10.5 workflow into the new System Image Utility and created a NetRestore (and NetInstall to test) image of a fresh 10.6 installation. Workflow is like this: 1. define image source 2. automatic installation (delete harddrive "Macintosh H
-
My computer's name has a (2) after its name in Side Bar-why?
I had this problem some time ago and thought I'd saved the reply in case it recurred- can't find it! In the sidebar my computer's name is: SCSMB but just today I noticed that it now appears as: SCSMB (2) This happened once before and I got a nice fix
-
Can I create a iPhoto card with blank inside?
Would like to create simple 5x7 cards with blank white inside. Any recommendations on how to so do? Thanks, Phoebe
-
Post xp installition issues...
hello. i installed xp pro corp sp2 on my mac book on a 15gb ntfs partition. some question... i am not able to use the trackpad. i can move the mouse pointer but cant click through it. i am forced to use the button. also, i am not able to right click.