When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?
When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2
Similar Messages
-
when opening itunes i got the following message: "Apple Application Support was not found. Apple Application Support is required to run itunes. please uninstall itunes, then install itunes again Error 2 (Windows Error 2)." if i do this will i lose my music library?
Hi texasslagle,
It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
There is an article that you may want to use to try to complete your install here -
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Thanks for using Apple Support Communities.
Best,
Brett L -
Trying to install iTunes on Windows 8.1. Apple Application Support was not found. Error 2. Uniinstall iTunes and try again, does not work. Is there a fix?
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work
For general advice see Troubleshooting issues with iTunes for Windows updates.
Start with the section Install missing components which should address your particular error. Otherwise the steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
Ok so I went to update my itunes 9 to itunes 10.5 and now I get and error message "Apple application support was not found" error 2 (windows error 2) when ever I try to run itunes and iv been trying to fix this for like a month and let me tell you iTunes for windows is **** and I really want Icloud for my iphone 4 and yes iv tried uninstalling everything by apple in the correct order and reinstalling them after restart atleast honestly 20 - 30 times but nothing worked so if anyone can please help me I have windows 7 and a hp intel pentium computer
Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2 -
When I try to open iTunes, Error 2 appears saying that itunes won't open because "Apple Application Support was not found". What do I do???
If your problem is only w/iTunes, you really should re-post over in the iTunes for Windows forums instead of the iPod forums.
-
On my windows pc, I mistakenly deleted Applie Applications Support file. Any help with how to restore it?
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version). If the following link takes you to the WinRAR home page rather than the WinRAR downloads page, click the Downloads header in the box at the left of the WinRAR home page to see the trial version downloads:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I have followed the steps to uninstall and reinstall 3 times with no success. I have followed the steps to uninstall the components in the proper order, always noticing the ITunes support is not there. I am the only user on my latop. Help please. I am so frustrated
Hello, desertbrats.
Thank you for visiting Apple Support Communities.
Here are the steps that I would recommend going through when experiencing this issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H. -
iTunes would not open, telling me I needed to update to a newer vesion. I downloaded the latest but kept bing met with the error 'Apple Application Support was not found. Apple application Support is required to run iTunesHelper. Please uninstal iTunes, then install iTunes again. Error 2'. I have uninstaled and installed countless limes over the past few months and still get the same message. How do I install Apple application support??
Like beaniespike and yourselves...I've tried everything to install itunes on my PC Vista Home Premium 32 bit system. Had older version of itunes running well on it but then just bought Ipod and hooked it up and was told to upgrade by uninstalling old version and reinstalling new version..oops..then the nightmares
Uninstalled /reinstalled
Disconnected all firewalls and antivirus and even uninstalled them with Revo..
with that effort..I then used winrar to extract to a file and manually install each piece..
all load EXCEPT Apple Application Support..but only if I do it manually..
Quicktime had to be manually installed.
Changed RegSZ to 0xFFFFFF value..still same error An error occurred during the installation of assembly policy 8.0 microsoft VC80. CRT, type =..blah, blah blah..ending HRESULT.... in middle of install..then at end error Apple Application Support not found error 2.
Whew..sooOO frustrated! Have Visual C++ 2005..am having trouble installing upgrades to it..
Windows Installer likes to quit alot..not sure how to fix that..urgh
Want to trash Ipod and itunes all together since finding solution that works for 2 days straight has been in vain!
Any help is much appreciated! -
hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?
If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll. -
Trying to load my new I Pod Nano onto my pc. Have tried numerous times and keep getting same message..."Error 2...Apple Application Support was not found. When I look at my control panel the only program that shows is "I Tunes". No other supporting programs are showing up in the control panel nor the Common Files nor in the Program Files (x86).
Any assistance would be greatly appreciated.When I look at my control panel the only program that shows is "I Tunes". No other supporting programs are showing up in the control panel nor the Common Files nor in the Program Files (x86).
That's an extreme case of this.
We'll try doing standalone installations of all the supporting programs.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone Apple Mobile Device Support install.
Doubleclick the AppleSoftwareUpdate.msi to do a standalone Apple Software Update install.
Doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.
Do those four installs go through okay? If so, does your iTunes launch without any errors now? -
HT1923 did anyone get the apple application support was not found when trying to instal?
I am having trouble instaling itunes. has anyone got the apple application support was not found when trying to instal itunes? it looks like it is not installing all of files to my computer and it can not reach a certain folder
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Add Folder to Library option is not available in the latest version of iTunes for Windows. I am using Windows 7 64 bit. Any suggestion ?
CTRL + B will bring up the menu bar, on which is File/Add Folder...
-
It says this when I try to open iTunes:
Apple Application Support was not found.
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.
Error 2
I've tried uninstalling it and installing it several times. I've tried to download Apple Application Support separately but it just says:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4... Please refer to Help and Support for more information. HRESULT:0x800736FDYou have missing information in your Windows programming.
You need to repair your computer so it can run iTunes. If you plug those error codes into your browser you may get an answer. -
Apple application support was not found windows error 2 when downloading itunes
I have been trying to download itunes after not using it for at least 2 years. I am getting the message "apple application support was not found - windows error 2" Can anyone help - I can't play my songs at all!!
TrudySee Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
Ipad won't sync all of photo library.
I have recently bought an iPad 2. I updated it to ios5 and it does not sync my complete iPhoto library. I have ~9000 photos in my library, only about 3000 of which are being transferred to my iPad. There is plenty of space on the iPad 32GB of a 64GB
-
How to create a lookup in Crystal Reports or SQL Server
I need to create an Operating Statement report. The problem is that I need to create a lookup or something to satify a requirement that even if there is no data in the system it will still bring back a description. Example: 01 = Income, 02 = Expens
-
How to hide/show a menu item?
Hi, Pls suggest how to do this: There is one book( say "one") and one page (say "two") on the portal, which are displayed to user as menu items. The book has two pages ( say 'a' and 'b'), which are shown in the menu dropdown of "one". I want to show
-
Business Catalyst Help | Manage site users
This question was posted in response to the following article: http://helpx.adobe.com/business-catalyst/using/site-users.html
-
Hello guys, I have a workflow whose main workitem is in the status of "In Process" and the subworkflow has the status "Error". The subworkflow is stuck and the 3rd step in the subworkflow is in "Completed" status. For the next step, the error is "Err