When trying to enter my wifi password the ipod won't let me enter upper case letters. do you have any ideas on how to fix this ?

when trying to enter my wifi password the ipod won't let me enter upper case letters. do you have any ideas on how to fix this ?

Try holding the Capslock key with the letter you want to be capitalized. It should work.

Similar Messages

  • Hi ... After I have installed IOS 6 on my Iphone 4, the WiFi connection is trying to authenticate in the Apple site but the page is not found. Do you have any idea on how to bypass this authentication ??  Regards,  Gilson

    Hi ... After I have installed IOS 6 on my Iphone 4, the WiFi connection is trying to authenticate in the Apple site but the page is not found.
    Do you have any idea on how to bypass this authentication ?? 
    Regards,
      Gilson

    Hi...
    After I have wait for 30 minutes without do anything, the wifi interface worked.
    I don't know if Apple could fix the issue on their site or the reboot of the Iphone solved the problem.
    I'm installing IOS 6 on the Iphone 4 of my wife. Let's see if the behaviour is the same.
    I will post the informations after finish the installation.
    Gilson

  • My IPad disconnected from my home WiFi and will not accept my password.  Does anyone have any ideas on how to fix this?

    My IPad has disconnected from my home WiFi and will not accept my password.  Does anyone have any ideas on how to fix this?

    I would
    1. turn off the router for 30sec and connect it to see if it fix it
    2. restart the ipad by holding down the on and home button and use the slider
    3. update the firmware of the router

  • I have an iPhone 4 and the speakers arent working and the sound works in headphones on when my phone is charging, do you have any suggestions on how to fix this?

    I have an iPhone 4 and the speakers arent working and the sound works in headphones on when my phone is charging, do you have any suggestions on how to fix this?

    Hi courteney17,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with sound on your iPhone 4:
    iPhone: No sound or distorted sound from speaker http://support.apple.com/kb/ts5180
    Cheers,
    - Judy

  • I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem?

    I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
    Interval Since Last Panic Report:  665204 sec
    Panics Since Last Report:          8
    Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
    Sat May 26 07:23:05 2012
    panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8160313b00 : 0xffffff8000220792
    0xffffff8160313b80 : 0xffffff80002b4f36
    0xffffff8160313b90 : 0xffffff8000227e68
    0xffffff8160313bd0 : 0xffffff7f80d14250
    0xffffff8160313c20 : 0xffffff7f80d14f73
    0xffffff8160313cc0 : 0xffffff800059a237
    0xffffff8160313d00 : 0xffffff8000586cbf
    0xffffff8160313d20 : 0xffffff800057e6e3
    0xffffff8160313df0 : 0xffffff800057ed06
    0xffffff8160313e20 : 0xffffff8000583c52
    0xffffff8160313e70 : 0xffffff8000583d05
    0xffffff8160313e90 : 0xffffff80005358b4
    0xffffff8160313ef0 : 0xffffff80005367c3
    0xffffff8160313f30 : 0xffffff8000536897
    0xffffff8160313f60 : 0xffffff80005ccfe8
    0xffffff8160313fb0 : 0xffffff80002da5e9
          Kernel Extensions in backtrace:
    com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
    dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
    BSD process name corresponding to current thread: iStatLocalDaemon
    Mac OS version:
    11E53
    Kernel version:
    Darwin Kernel Version 11.4.0: Mon Apr  9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
    Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 69777074610
    last loaded kext at 58265763561: com.intego.iokit.VBX6NKE            1 (addr 0xffffff7f80d11000, size 45056)
    loaded kexts:
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
    Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
    USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
    USB Device: CanoScan, 0x04a9  (Canon Inc.), 0x1904, 0xfa141200 / 6
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: HUAWEI Mobile, 0x12d1  (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
    USB Device: My Passport 070A, 0x1058  (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

    Immediate suspects are the additions you added to you rsystem that installed kexts (drivers).  From above,
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Two experiments you can try.
    1.  Boot in safe mode and see if you can shut down normally.  All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
    2. Uninstall all the intego VirusBarrier stuff.  That's my first guess and the troublemaker.

  • My iPod touch 4th gen iOS5.1.1 can't be recognised by my computer and I have tried different cables and usb ports but nothing has worked. The iPod is brand new and was only opened today. Any ideas on how to fix this?

    I have just today recieved a brand new iPod Touch 4th generation iPod with the latest update. Everything else on the ipod is working and my computer is able to read the camera fine, but iTunes cannot recognise it - even after restarting and trying different USB ports and cables.  There is nothing at all coming up on the device list and iTunes is working as it would if I had no iPod plugged in. This is my first iPod on this computer and I have already tried redownloading iTunes. My computer is a windows XP computer. Does anyone have any idea on how to fix this problem?

    Since this is an XP machine, which version of iTunes do you have installed?  Is it the latest version?
    Have you tried starting iTunes, attach the USB end of the cable, then while holding the home button on the iPod connect the 30-pin connector end of the cable to the iPod...that is the recovery mode but also should make iTunes see the iPod.
    If that doesn't work you may need to take the iPod back and have it tested by the genius bar techs to make sure the connector is not bad.

  • HT1688 i have an i phone 4s. i have tried everything i know to do but cant get the phone to ring out loud when i recieve a call or message. any ideas on how to fix this?

    I have an i phone 4s I have tried everything i know to do, but cant get the phone to ring out loud when i recieve a call or message. Any ideas on how to fix this?

    Flip the ring/silent switch on the left side of the phone from silent (red showing) to ring position.

  • Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. Any ideas of how to fix this?

    Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. The screen is still black and white. Any ideas of how to fix this?

    Hi im,
    Thanks for using Apple Support Communities.  This article has a few troubleshooting ideas for issues with color on your TV when using Apple TV:
    Apple TV (2nd and 3rd generation): Troubleshooting video issues
    http://support.apple.com/kb/TS5148
    Cheers,
    - Ari

  • When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media.  Any ideas on how to fix this.  It only happens in fcp.

    When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media.  Any ideas on how to fix this.  It only happens in fcp.

    By internal, I assume you're referring to your systems (boot) drive. Is it, by chance, a partitioned dive?
    Also…although many people successfully use their systems drives as scratch disks, over time you'll have better results using a dedicated drive for your media.
    Good luck.
    Russ

  • Hi everyone.. I have windows 7 (32 bit operating system), and have tried installing the latest version of Itunes, but my PC keeps saying windows 7 error (126) ? I have no idea on how to fix this??

    hi everyone.. I have windows 7 (32 bit operating system), and have tried installing the latest version of Itunes, but my PC keeps saying windows 7 error (126) ? I have no idea on how to fix this??
    Please could someone help???
    And it also mentions mediatoolbox dll. is missing?? haha i have no idea what that means??? please help...
    Thanks alot! I really appreciate your help..

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • HT1338 When I insert a disk, a disk icon does not appear on my desktop, nothing happens and there is no option to eject. I have to restart in order to eject the disk.  Any ideas on how to fix this problem?

    When I insert a disk, a disk icon does not appear on my desktop, nothing happens and there is no option to eject. I have to restart in order to eject the disk.  Any ideas on how to fix this problem?

  • Recently when I search for things in the top right search bar in iTunes, the results show up but I cannot click on them. Any ideas on how to fix this?

    Recently when I search for things in the top right search bar in iTunes, the results show up but I cannot click on them. Any ideas on how to fix this?

    Go to this address: http://mycroft.mozdev.org/search-engines.html?country=AU
    Item 24 lists 3 installable major search engines for Australia.
    You can also restrict your search in Google by including ''country:au'' or ''location:au'' or ''city:perth'' (for example) in your search terms. Example: ''city:sydney plumbers'' in the Google search box will list plumbers in cities named sydney.

  • My primary keyboard is English UK and secondary one Spanish. Until now when switching keyboards the spell check would automatically change to the desired language. Somehow it does not happen anymore. Any ideas on how to fix this?

    My primary keyboard is English UK and secondary one Spanish. Until now when switching keyboards languages the spell check would automatically change to the desired language. Somehow it does not happen anymore. Any ideas on how to fix this?

    The keyboard doesn't normally play any role in Apple apps regarding spellcheck.  That  is determined by system prefs/keyboard/text/spelling.  Go the setup item at the bottom of the list and make sure that British English and Spanish are the only two boxes checked, and then set it to Automatic.  How well it works varies a lot.  You may also need to check Edit > Spelling and Grammar > Show Spelling and Grammar.
    If you are still using Pages 4, spellcheck is determined by Inspector > Text > More > Language.  Make sure that is set to the right thing for what you want to do.

  • HT201335 My iphone (ios 7.1) is not showing the apple tv icon from my pull up center control? They are both running on the same wifi network... Any ideas on how to fix this problem?

    My iphone (ios 7.1) is not showing the apple tv icon from my pull up control center? They are both running on the same wifi network... Any ideas on how to fix this problem?

    Was it working before? Is your Apple TV enabled for airplay?
    See
    http://support.apple.com/kb/TS4215?viewlocale=en_US&locale=en_US

  • I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?

    I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Download and install the OS X Yosemite 10.10.3 Combo Update.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

Maybe you are looking for

  • Oracle HTTP Server (OHS)  Installation Problem on Win 2003 Server SP2

    Hi, I tried to install Oracle HTTP Server (OHS) on my Windows 2003 server SP2, however I couldn't manage to succeed this. I tried on 3 different win2003 server SP2 machines and couldn't able to install properly. I easily installed and run this HTTP s

  • Is it possible to upgrade 10.4.11 to 10.6 on an macbook 2007

    Im am trying to update a macbook I recently purchased to 10.6 from 10.4.11 since itunes only works with 10.6. The macbook has 1.83 ghz intel core duo and 2 gigs of memory with plenty of hard drive space. Can anyone give me any pointers on what i need

  • Does Time Machine prevent sleep?

    Surely, if I have time machine set to say 1hrs 15 mins it will never sleep because of the Time Machine hourly backups? I have a brand new iMac and although it it set to sleep it never does and I think that is due to TM running every hour... Just as m

  • Re-installed router software - can't change password!

    I had to format my HD so I re-installed my linksys WRT54g wireless router and used the installation disk. at the end it says to put in my password. I put in every combination of password I could think of, but it keep going back and asking me again. s

  • Bluetooth still not working?

    I updated to ios8.2 and still have no audio with Bluetooth. Also interestingly enough I can not turn off my phone now????