When trying to save interface ,gives error

Hi ,
When i am trying to save it gives error below.
Interface has following errors.Interafce can't be generated or executed.
Do you want o save anyway.
Critical Staging Area The staging area of this interface is defined on the target but has a logical schema different from the target datastore.
Redards,
srini

Hi,
you are using different schema for your target tables. i mean you are creating target datastore different from where your sources located.
suppose that you have staging and target schema. you have to create your tables in staging if sources are located at staging area.
if you want to use target schema, you have to configure one more logical schema at topology tab.
and select new logical schema when you are establishing your new interface at overview tab.
i hope this helps.
www.odilibrary.com
Ugur MIHCI

Similar Messages

When trying to save photos get error (memory RAM, CS6)

After working on the photo, if you try to keep getting the error
could not save as ***.jpg because there is not enough memory ram. try saving without optimization or as baseline jpeg
My notebook config:
core i3 M380. 2.53 GHz
memory 2gb
hdd ~ 40gb free disk C.
graphic integrated
Adobe Photoshop CS 6 13.0.1.1
Windows 7 32bit
PS Preferences:
     Memory used
     Available RAM: 1531 Mb
     Let Photoshop Use: 995 Mb (65%)
Scratch Disks:
     C:\ 42.59 Gb Free Space
     D:\ 41.23 Gb Free Space

You have the bare minimum RAM for the program to launch. Running it well is a different matter.
You don't have nearly enough available drive space on that C drive to accomodate both the swap files of the OS and a Photoshop scratch disk. Your D drive is woefully short on space too.
My system is bare bones minimal and I have a dedicated 250 GB hard drive as my primary Photoshop scratch drive.
The error message you are getting means exactly what it says.

'Unknown Error' when trying to save files from CS under Leopard

We recently upgraded to Leopard, and reinstalled our CS apps. Photoshop and InDesign work fine. Illustrator, however gives us an 'An Unknown Error has Occurred' when trying to save any file. After dismissing the alert, a window pops up, informing us that, 'Can't save preview, but all other information was saved successfully. The file couldn't be found. ID=-43.' This happens when trying to save a new file, or an existing file, when saving with PDF preview is checked, or unchecked. Does anyone know how to fix this?

I deleted preferences on both machines. The Intel seems to be cured. All file formats save, printing, and importing are functioning normally.
The G5 however is only modestly improved. I can now at least create and save files. Printing also functions. However if I attempt to use the template dialog box or to import (place) a file the dialogs crash the application.
My suspect is a corrupt font, but until I have time to track down which one it is, I'll have to limp along as is...

Installing the latest update on my iPad - error message saying the iPad couldn't synchronize because of an internal error, and then - error message (OxE8004017) when trying to save, and then (2003) when trying to restore - nothing works anymore

Installing the latest update on my iPad - error message saying the iPad couldn't synchronize because of an internal error, and then - error message (OxE8004017) when trying to save, and then (2003) when trying to restore - nothing works anymore - On my iPad the only thing I see is a connector cord to iTunes and nothing else.
What can I do ???

Same issue for me, recently I started having issues with apps no longer being able to access my Facebook account. But the iPad Facebook account settings will not accept my password, even though the Facebook app and Safari can access my account fine. The only significant events I recall that have occurred that may have triggered this have been that via my Facebook account I killed off a lot of so called authorised connections and I changed my user name, but still have the same email address and password.
I have tried just about every solution put forward on the net, short of a factory restore, back to new, on my iPad.
I have also; deleted my iCloud account, deleted the Facebook app and account, deleted Safari data.
One would think that after I have deleted my account from the iPad that it would ask for both username/email address and password, but it only asks for password, so the username is still stored somewhere that I am unable to delete.
I also see that no one seems to have been able to get an answer from Apple. So I'm guessing they have absolutely no idea themselves.
I am hesitant to put my username on Facebook back to what it was as Facebook only give you a few chances to change your username, then you are locked.
I have iOS 7.1.1 installed.
I did have a lot of respect for Apple and their devices as they just worked, but they are becoming tarnished by ignoring what seems to be a growing issue.

Error 200279, when trying to save waveform

Dear Sir,
When trying to save voltage waveform(by clicking record button, to save into ASCII file),
the waveform is distorted and soon it comes "error 200279" with the following message:
==================================================================
Possible reason(s):
Measurements: Attempted to read samples that are no longer available. The requested sample was previously available, but has since been overwritten.
Increasing the buffer size, reading the data more frequently, or specifying a fixed number of samples to read instead of reading all available samples might correct the problem.
Property: RelativeTo
Corresponding Value: Current Read Position
Property: Offset
Corresponding Value:
Task Name: _unnamedTask<105>
==================================================================
Is it because of memory in PC? or do I have to adjust sampling rate?
Please give me some tips to resolve this problem. Thank you.

Hi Sbomy,
There error you are receiving is a buffer overflow error and can be easily corrected by decreasing the sampling rate or increasing the buffer size and the samples to read. Here is some information about it:
http://digital.ni.com/public.nsf/allkb/BB4E0A58688EB812862562C2004DF9A5?OpenDocument
Let me know if you have any other questions.
Sappster

Bookmark error comes up when trying to save first time

Bookmarks give an error message when trying to save the first time. After first time, then it saves correctly. I get this message. unload: [Exception... "Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [nsIObserverService.removeObserver]" nsresult: "0x80004005 (NS_ERROR_FAILURE)" location: "JS frame :: chrome://trustchecker/content/trustchecker.js :: anonymous :: line 955" data: no]

That error message is from something called '''trustchecker''' or similar. You didn't bother to post your Troubleshooting Information as requested, so that's about as close to ID'ing that as I can guess.
Tools > Addons >> Extensions - look for that there and either check for an update for it or disable.

Error when trying to "Save for Web"

I, like others have the same problem in Photoshop Elements 6 editor when trying to "Save for Web". I get an error:
could not complete the export command because of a program error
I've searched the forum, but it seems like no one has found a solution.
I have a new PC with Windows 7 on it. It's Win 7 Ultimate 64-bit. i5 processor, 16GB RAM and plenty of HD space.
I am running Photoshop Elements 6.
When I used the same version of Photoshop Elements 6 on my old XP computer, I didn't have this problem.
Adobe Photoshop Elements Language Version: 6.0 (6.0 (20070910.r.377499))
Operating System: Windows Vista
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP
Physical processor count: 4
Built-in memory: 15822 MB
Free memory: 11064 MB
Memory available to Photoshop: 1621 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: 10571087952197841429
Application folder: D:\Program Files\Adobe Photoshop Elements\
Temporary file path: C:\Users\Roger\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 111.7G, 76.2G free
Primary Plug-ins folder: D:\Program Files\Adobe Photoshop Elements\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
   3D Transform 10.0 (10.0x001)
   ADM NO VERSION
   ASDStrm NO VERSION
   Accented Edges 9.0
   Angled Strokes 9.0
   Auto Divide 6.0.0.0 (6.0 (20070910.r.377499))
   Average 10.0 (10.0x001)
   BMP 10.0 (10.0x001)
   Bas Relief 9.0
   Camera Raw 4.2
   Chalk & Charcoal 9.0
   Charcoal 9.0
   Chrome 9.0
   Clouds 10.0 (10.0x001)
   Color Halftone 10.0 (10.0x001)
   Color Variations 10.0 (10.0x001)
   Colored Pencil 9.0
   CompuServe GIF 10.0 (10.0x001)
   Conditional Mode Change 10.0 (10.0x001)
   Conté Crayon 9.0
   Correct Camera Distortion 9.0
   Craquelure 9.0
   Crop and Straighten Photos Filter 10.0 (10.0x001)
   Crosshatch 9.0
   Crystallize 10.0 (10.0x001)
   Cutout 9.0
   Dark Strokes 9.0
   De-Interlace 10.0 (10.0x001)
   Difference Clouds 10.0 (10.0x001)
   Diffuse Glow 9.0
   Displace 10.0 (10.0x001)
   Dry Brush 9.0
   Extrude 10.0 (10.0x001)
   FastCore Routines 10.0 (10.0x001)
   Fibers 10.0 (10.0x001)
   Film Grain 9.0
   Filmstrip 10.0 (10.0x001)
   Filter Gallery 9.0
   Frame From Video 6.0
   Fresco 9.0
   Generic EPS 10.0
   Glass 9.0
   Glowing Edges 9.0
   Grain 9.0
   Graphic Pen 9.0
   Halftone Pattern 9.0
   Ink Outlines 9.0
   JPEG 2000 2.0
   Lens Flare 10.0 (10.0x001)
   Lighting Effects 10.0 (10.0x001)
   Liquify 7.0
   MMXCore Routines 10.0 (10.0x001)
   Magic Extractor 10.0 (10.0x001)
   Matlab Operation 10.0 (10.0x001)
   Mezzotint 10.0 (10.0x001)
   Mosaic Tiles 9.0
   Multiprocessor Support 10.0 (10.0x001)
   NTSC Colors 10.0 (10.0x001)
   Neon Glow 9.0
   Note Paper 9.0
   Ocean Ripple 9.0
   OnEdge 1, 0, 0, 1
   PCX 10.0 (10.0x001)
   PNG 10.0 (10.0x001)
   PNG Icons 1.22x1
   Paint Daubs 9.0
   Palette Knife 9.0
   Patchwork 9.0
   Photocopy 9.0
   PhotomergeUI 10.0 (10.0x001)
   Picture Package Filter 10.0 (10.0x001)
   Pinch 10.0 (10.0x001)
   Pixar 10.0 (10.0x001)
   Plaster 9.0
   Plastic Wrap 9.0
   Pointillize 10.0 (10.0x001)
   Polar Coordinates 10.0 (10.0x001)
   Poster Edges 9.0
   Radial Blur 10.0 (10.0x001)
   Read Watermark 1.70.19
   Reticulation 9.0
   Ripple 10.0 (10.0x001)
   Rough Pastels 9.0
   Save for Web 3.0
   ScriptingSupport 10.0
   Shear 10.0 (10.0x001)
   Smart Blur 10.0 (10.0x001)
   Smudge Stick 9.0
   Solarize 10.0 (10.0x001)
   Spatter 9.0
   Spherize 10.0 (10.0x001)
   Sponge 9.0
   Sprayed Strokes 9.0
   Stained Glass 9.0
   Stamp 9.0
   Straighten Image 10.0 (10.0x001)
   Straighten and Crop Image 10.0 (10.0x001)
   Sumi-e 9.0
   Targa 10.0 (10.0x001)
   Texture Fill 10.0 (10.0x001)
   TextureSelect 10.0 (10.0x001)
   Texturizer 9.0
   Tiles 10.0 (10.0x001)
   Torn Edges 9.0
   Twain Acquire 10.0 (10.0x001)
   Twain Select 10.0 (10.0x001)
   Twirl 10.0 (10.0x001)
   Underpainting 9.0
   WIA Support 10.0 (10.0x001)
   Water Paper 9.0
   Watercolor 9.0
   Wave 10.0 (10.0x001)
   Wind 10.0 (10.0x001)
   Wireless Bitmap 10.0 (10.0x001)
   ZigZag 10.0 (10.0x001)
Plug-ins that failed to load: NONE
Installed TWAIN devices:
   WIA-HP Scanjet 4800 series

I also tried the alt/ctrl/shift buttons when clicking Editor in the Photoshop welcome screen. It did ask if I wanted to reset the preferences. I chose yes. I still get the same error message when trying to save for web.
Below....showing I don't have a "save for web" folder on my C drive.
And below, showing the same error after pressing alt/shift/ctrl when clicking on editor and clearing the preferences.
I don't have a 'Save for Web' folder anywhere on my C: drive. I searched and came up with no folder with the text "save for web" in it.
I did find a "save for web" folder on my D: drive and deleted that.. but now when I start up Photoshop, the option for Save for Web is grayed out...not able to select it.

Error when trying to save a file

I get this error when trying to save any file (newly created or not) word document in MS word 2010:"You are attempting to save a file type (plain text files) that has been blocked by your File Block settings in the Trust Center".
I followed the directions given by the Microsoft Knowledge Base article 922850, but I am still having this issue. I can still save files as PDF but not in any kind of word format.
I also tried opening another file copy and pasting under a different name and it doesn't help.
Please Help.
Bruce

Hi,
Please try the following methods:
Using Administrative Template files and the Office Customization Tool to disable the restriction
Use a trusted location, or create an exempt location
Quote from:
http://support.microsoft.com/kb/922849/en-us
Regards,
George Zhao
TechNet Community Support

How to fix 'An Unknown error has occurred" when trying to save an illustrator CS5 doc

Hi
I have just upgraded to a new iMac late 2013. After running a migration from my old mac to the new. I now have the following error: "Unknown error has occurred" when trying to save an illustrator CS5 doc.
How do you fix 'An Unknown error has occurred" when trying to save?
All help, most welcome.
Thanks
Marty

Hi
Thanks for your response. I have reinstalled and used the adobe clean software to remove all adobe software first. still not working. Can you explain in more detail "fix the permissions on your User: Library folders"? I have verified disc perms in Disc Utility.
Thanks
M

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Error when trying to save a fillable form?

Hi,
My staff is getting an error when trying to save information that was typed in a fillable form. They are able to print but cannot save. The error message they are getting is: "Cannot Save Form Information Please note: You cannot save a completed copy of this form on your computer. If you would like a copy for your records, please fill it in and print it." They have also gotten the message: "Save a Blank Copy of this Form Data typed into this form will not be saved. Adobe Reader can only save a blank copy of this form. Please print your completed form if you would like a copy for your records."
This form was created in LiveCycle ES4. I have Adobe XI on my computer and I am able to save the form fine. My staff has Adobe 9 on their computer. Is there anything I can do so that they will be able to save the form on their computer once they have finished filling it out?

Gilad D (try67) wrote:
Mac users can fill in LCD forms just fine, they just can't create them.
And you can fill in and save an LCD form in Reader, if it has the appropriate rights applied to it in Acrobat before-hand.
I thought The latest Reader XI (regardless of Platform) had the ability Print and save with or, without reader rights. That what I've been reading on this forum ever since reader XI came out.

'System Error' when trying to save Form Manager Registry Settings

Hi,
trying to save changes made in the form manager registry settings [Home > Services > Adobe LiveCycle Form Manager > Registry Settings (http://localhost:8080/FormManagerAdmin/registry-cfg-load)], I get an error, which reads:
> System Error
>
The request could not be processed. Please retry the operation. If the problem persists, please contact your system administrator.
Has anyone had this error as well?
The system runs fine apart from the jboss log files being crammed with the well-known and pretty annoying
SpyJMSException.
Does anyone have an idea how to apply changes to the form manager registry settings, if the web ui does not work? Where are the 'form manager registry settings' being stored? Maybe I succeed in changing the settings manually at least without having to re-install Livecycle...
Regards,
Steve

We are using JBoss 3.2.5.
Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

Error when trying to save still image from video with Quicktime Pro

I just purchased Quicktime Pro so that I can use it with my new Nano (the one that shoots video). I want to grab a frame from the video and create a still image (in jpeg format). I should be able to do it, but when I try, I get an error 11005 (or something like that). Anyone know any way to fix this? Thanks!

I also tried the alt/ctrl/shift buttons when clicking Editor in the Photoshop welcome screen. It did ask if I wanted to reset the preferences. I chose yes. I still get the same error message when trying to save for web.
Below....showing I don't have a "save for web" folder on my C drive.
And below, showing the same error after pressing alt/shift/ctrl when clicking on editor and clearing the preferences.
I don't have a 'Save for Web' folder anywhere on my C: drive. I searched and came up with no folder with the text "save for web" in it.
I did find a "save for web" folder on my D: drive and deleted that.. but now when I start up Photoshop, the option for Save for Web is grayed out...not able to select it.

Error when trying to save/apply in OAM Console (credential store / wallet)

So our Admin WLS had accidentally been started as root previously, so we restarted as oracle (after chown -R oracle:oinstall all files), and the Admin Server starts up ok. However, when attempting to save/apply a change within the OAM console, we receive the following error:
Error in creating the credential store (wallet) : JPS-01047: Cannot persist the wallet. Reason java.io.IOException: java.io.FileNotFoundException: /tmp/pki_data1951273487.lck.tmp (Permission denied).
And in the log files this also appears:
<Mar 29, 2013 2:27:01 PM CDT> <Warning> <oracle.jps.idmgmt> <JPS-01520> <Cannot initialize identity store.>
java.lang.RuntimeException: java.security.PrivilegedActionException: oracle.security.jps.service.idstore.IdentityStoreException: JP-01520: Cannot initialize identity store.
Any help would be greatly appreciated!
Thanks,
Chris
Edited by: ch**** on Mar 29, 2013 12:29 PM

We are using JBoss 3.2.5.
Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

When trying to save a document , it says syntax error-what does that mean and how do I fix it?

when trying to save a document that I typed, it says syntax error..what does that mean and how do I fix it so I can save my documents?

Applescript is like HTML, Actionscript, or Javascript.
SYNTAX is EVERYTHING.
Unlike HTML, Dreamweaver will pop a syntax error when trying to save a javascript that is unworkable because of a Syntax Error. Flash will do the same with a bad Actionscript.
AppleScript Editor is the same way as Dreamweaver or Flash.
The reason is:
Bad HTML - a browser simply won't load the page or it'll load it with missing or no content. Not all that bad.
Bad Javascript - your browser can lock up and if the script is complex enough, it can lock up your entire system.
Bad Actionscript - just like bad javascript, it can potentially lock your entire system.
Bad Applescript - can lock up your entire system.
With Windows, viruses are often improperly read as SYNTAX errors in Actionscript or Javascript. That's not a worry with an AppleScript, but the possibility of locking up your system is worth a warning.
You need to double check your syntax to be sure you haven't got something missing or improperly written.

When trying to save interface ,gives error

Similar Messages

Maybe you are looking for