When turning on bluetooth why even if the other device is found and paired on the ipad says not connected. The other device must be only apple product?

bluetooth. When turned on on ipad canot found other device. Nevertheless the ipad can be found by other devices and paired, transfer of data cannot be done since on ipad the paired device is shown as not connected. Is it that the other device is not an apple product?

The transfer of data by Bluetooth is not supported on the iPad. Here are the supported Bluetooth profiles.
http://support.apple.com/kb/ht3647

Similar Messages

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

See if the iPad will accept the password after you restart it. It's worth a try.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You could also try a reset as well.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

I have Oracle Wireless Bluetoth Headset NoiseHush N500 and for some reason it will not connect to my iPhone 4. Can Apple send me a bluetooth headset that is compatiable with the iPhone 4?

Can Apple please send me a compatiable bluetooth headset?

This is a user to user forum. But I'm sure Apple would be happy to send you a compatible Bluetooth headset if you purchase one from the Apple Store. You could also order one from someplace like Amazon.com.

Ipod displaying lock when turning up volumne,why?

ipod displaying lock when turning up volumne, why?

Hello Dawn,
There may be a maximum volume limit set on the iPod. See this article for more information.
http://support.apple.com/kb/TA38403?viewlocale=en_US
B-rock

HT4623 my iphone 3 when turned on shows a picture of the jack and an arrow pointing to Itunes. I can't get it off this screen. help!

my iphone 3 when turned on shows a picture of the jack and an arrow pointing to Itunes. I can't get it off this screen. help!

Do what you are being told. Plug the phone into a computer running iTunes and restore the phone.

When I try to download a song onto my iPad from iTunes Match, my iPad says "Cannot connect to the iTunes Store" even though I have a perfect Internet connection.

When I try to download a song onto my iPad from iTunes Match, my iPad says "Cannot connect to the iTunes Store" even though I have a perfect Internet connection.

Try a power cycled of the iPad.

HT1695 Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

Hi! I am having the same problem. What's odd is that a few days ago- the ipad was connecting to the network fine. No changes made. Other devices can connect to this network. I have also been able to connect my ipad to other networks.
I have reset all network settings, reset my ipad, reset the router, hard stop reboot, turn on/off wifi connection. what's interesting is that when i click the arrow next to the network i am trying to log onto- the ip address, router, and dns numbers come up automatically and the router number does not fill in (also- this process takes a long time- at least 5 minutes).
any thoughts?

My firefox always opens a crash report when I close it. Even if I have no tabs open and close firefox.

The Crash information is:
AdapterDeviceID: 95c4
AdapterVendorID: 1002
Add-ons: TFToolbarX@torrent-finder:1.2.6,{1de0de3c-0b5c-4f67-90c6-689623894991}:0.3,{9fb7d178-155a-4318-9173-1a8eaaea7fe4}:2.1.11,{B17C1C5A-04B1-11DB-9804-B622A1EF5492}:1.2.1,{c0c9a2c7-2e5c-4447-bc53-97718bc91e1b}:5.4,{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}:1.3.9,{D4DD63FA-01E4-46a7-B6B1-EDAB7D6AD389}:0.9.8,{ef4e370e-d9f0-4e00-b93e-a4f274cfdd5a}:1.4.4,{b9db16a4-6edc-47ec-a1f4-b86292ed211d}:4.9.5,[email protected]:4.0.2,{1E73965B-8B48-48be-9C8D-68B920ABC1C4}:10.0.0.1410,avg@igeared:7.008.031.001,[email protected]:1.3.5
AvailableVirtualMemory: 3804364800
BuildID: 20110902133214
CrashTime: 1316851060
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1315413340
Notes: AdapterVendorID: 1002, AdapterDeviceID: 95c4, AdapterDriverVersion: 8.872.0.0
D2D? D2D+
DWrite? DWrite+
D3D10 Layers? D3D10 Layers+
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 452
StartupTime: 1316850895
SystemMemoryUsePercentage: 78
Theme: LavaFox_V1-Blue
Throttleable: 1
TotalVirtualMemory: 4294836224
URL: https://support.mozilla.com/en-US/questions/new?product=desktop&category=d2&search=My+firefox+always+opens+a+crash+report+when+I+close+it.+Even+if+I+have+no+tabs+open+and+close+firefox.&showform=1
Vendor: Mozilla
Version: 6.0.2
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 :
MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 :
MSAFD Tcpip [TCP/IPv6] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IPv6] : 2 : 2 :
MSAFD Tcpip [RAW/IPv6] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
RSVP TCPv6 Service Provider : 2 : 1 :
RSVP TCP Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP UDPv6 Service Provider : 2 : 2 :
RSVP UDP Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
This report also contains technical information about the state of the application when it crashed.

Have a read of the rather complicated article
* [[firefox crashes]]
* and for anyone with firefox crashing before you can key in about:crashes see: <br/> http://kb.mozillazine.org/Breakpad#Location_of_crash_reports
I note you have found bp-54df2ba6-de52-405d-9ccc-4dd272110924 have you any other recent crash signatures or crash IDs, the one you provide seems rather uncommon [https://crash-stats.mozilla.com/report/list?product=Firefox&query_search=signature&query_type=exact&query=karasx2.dll%400x2535&reason_type=contains&date=09%2F24%2F2011%2001%3A44%3A07&range_value=1&range_unit=weeks&hang_type=any&process_type=any&do_query=1&signature=karasx2.dll%400x2535 [karasx2.dll%400x2535]]
Do you still get the problem in [[safe mode]] and with default themes, and all plugins disabled. Note common causes of crashes are malware, and versions of the software IDvault. (do you use IDvault ? - often provided by Comcast)

HT201485 When I try to complete an in app purchase a message pops up saying: YOUR PURCHASE CANNOT BE COMPLETED.. I close that and another message pops up saying: CANNOT CONNECT TO THE ITUNES STORE... I am connected to the Internet, can anyone figure this

When I try to complete an in app purchase a message pops up saying: YOUR PURCHASE CANNOT BE COMPLETED.. I close that and another message pops up saying: CANNOT CONNECT TO THE ITUNES STORE... I am connected to the Internet, can anyone figure this out?

Hello,
Brother please follow these steps
1) SignOut from Your apple itunes account
2) Again Sign In Your iTunes Account
And you can turn off your wifi/internet from your iphone and again turn it on
Kind Regards
AmirKhalid (AKQ)

Why does my ipad say "not charging" when plugged in?

Why does my ipad say "not charging," when plugged in?

http://support.apple.com/kb/HT4060
Read the KB article. Make sure you are using the 10W adapter that came with the iPad or a High-Power USB 2.0 port.

After upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings general Network says Not Available Why is this? Did the upgrade cause this?

after upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings>general>Network>says Not Available Why is this? Did the upgrade cause this?
steve

See this tip --> http://support.apple.com/kb/TS1559
If this doesn't resolve it you most likely have a hardware failure. Fortunately, your phone is in warranty, so if you take it to an Apple store they will replace it.

The iPad says disabled connect to iTunes. When connected it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!

The iPad says disabled connect to iTunes. When connected to iTunes it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

TS3899 I can preview email when it arrives (I chose 5 lines) but when I then go to open up the full email, I see only the header info (To, Subject & Date); nothing in the body...it is blank. This only started recently as before, it worked as expected. He

I can preview email when it arrives (I chose 5 lines) but when I then go to open up the full email, I see only the header info (To, Subject & Date); nothing in the body...it is blank. This only started recently as before, it worked as expected. Help?

I have two yahoo accounts and I know as they 'improved' their servers I had periodic outages. It'd work fine on my webmail on my computer, webmail on the iPad, but not via the mail app. And it was stuff on their end. It may be a case of wait and see and you may need to eventually remove/readd the account on your iPhone.
When the issue is on their end, unfortunately there's not much for users to do beyond wait it out or find work arounds.

TS5181 I downloaded a song but even after the download is complete, it only plays one second of the song and then it ends.

I downloaded a song to from iTunes, but even after the download is complete it only plays one second of the song and then it ends. Any ideas?

Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that track from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

When I try and download an app (iphone 4s) , from the app store a message pops up saying "Not connected to the intunes store

When I try and download an app , from the app store a message pops up saying "Not connected to the intunes store".

Try resetting network settings... settings>general>reset>reset network settings

When turning on bluetooth why even if the other device is found and paired on the ipad says not connected. The other device must be only apple product?

Similar Messages

Maybe you are looking for