When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!

When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!
I have an iPhone 3gs, and a work iPhone 4 on iOS 4.3.3.  I want to sych with iTunes but clearly must upgrade to >10.1
When I do, my network card no longer works on my desktop.  Please HELP!
My spec is;
NETWORK CARD;

polydorus wrote:
This isn't my thing, but the following post on this seems to have helped some people:
http://discussions.apple.com/thread.jspa?messageID=12622179#12622179
That's the go-to advice with this one, p. (I certainly don't have much to offer beyond it, but it does a superb job in the vast majority of instances.)

Similar Messages

  • When I upgrade from Snow Leopard to Mountain Lion my Quicken 2006 for Mac stopped working, short of paying the $59 for Quicken Mac Essentials is there anything else I can do to read my old files?

    help

    Preface: I have no experience with Quicken Essentials, but have read, quite often, on this and other forums that it is a further strip down of features from Quicken 2007.  So I agree, get Quicken 2007 for Lion/Mt. Lion, but...
    BE CAREFUL with Quicken!
    When Intuit finally released Quicken 2007 for Lion v16.1.1 in March, 2013 it was a godsend for older Quicken PPC users.  It will directly open the data file from Quicken 2005, 2006 or 2007 PPC versions.  The upgrade to 16.1.2 with the release of Mountain Lion was also stable.
    I found version 16.1.3 to crash on opening on my Lion Mac, so I downgraded back to version 16.1.2 and all is well.  Others are now reporting that version 16.1.4, the current version sold by Intuit, is also causing some problems.  I have not been able to isolate these reports.
    My point: purchase Quicken 2007 for Lion, but ALSO:
    1.  Make copies of your Quicken 2007 PPC data file and back them up BEFORE you attempt to open it in 16.1.4; and
    2.  If you run into problems, let me know by email (michaellax) at AOL dot com.
    If it works fine for you, please report that too!
    PS: Baltwo will tell you he has encountered no problems and good for him.  But the reports of others with problems keep mounting...

  • I've just updated itunes and it has disappeared from my PC- the previous shortcut won't work and it can't locate on my file search- this is the second time this has happened when updating itunes- APPLE you're going donw the tubes slowly but surely..

    I've just updated itunes and it has disappeared from my PC- the previous shortcut won't work and it can't locate on my file search- this is the second time this has happened when updating itunes- APPLE you seem to be going down the tubes slowly but surely..

    its not apple going "down the tubes" its that you have windows junk.  These opinion best left at apple.com/feedback
    you need to completely uninstall itunes and all components
    see these for help
    http://support.apple.com/kb/HT1925
    http://support.apple.com/kb/HT1923
    Peace, Clyde

  • Re: Error message updating itunes from 7.0.2 to 7.1.1 Gear driver (AspiWDM)

    I get error messages continuously when updating itunes. The error message I'm getting is: "Unable to install the GEAR driver set at this time. The GEAR AspiWDM used by the Gear driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run itunes again." I've done this numureous times with no resolve.
    I've read allot of 7.1.1 install problems but never ran accross this one. Does the 7.1.1 upgrade for itunes have clitches in the software? With 2500 songs and 20 movies currently on itunes and my ipod, I would hate to lose so much at this point or at all. Anybody, please give me your feedback or potential resolution to this problem. Thanks
    Systemac   Windows XP  

    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • TS1496 when updating iTunes to latest version windows error message appears

    when updating iTunes to latest version windows error message appears

    Okay.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • When updating itunes on pc it keeps failing and saying i must do it manually..

    when updating itunes on pc it keeps failing and saying i must do it manually..

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • HT4527 When transferring iTunes from old computer to new computer, even though all of songs were copied over, not all of them went to iTunes, some appear to be stored elsewhere. How can I find these songs, and how do I transfer them to iTunes?

    When transferring iTunes from old computer to new computer, all my songs were copied over, but not all of them were stored in iTunes. It appears they are on the computer somewhere, but not on iTunes. Where are these other songs likely to be, and how can I get them onto iTunes? Because of this problem, Apple will not allow me to update my iPhone.

    You may/must have had music files stored outside of your iTunes library.
    I'd recommend going to the Finder and then via the search box look for files with mp3 aif m4a aac etc. depending on the music format your digital music had. With the list of files shown you should be able to learn which files were stored outside of your music > itunes folder
    Chances are they could be burried somewhere under your documents, downloads, desktop, ... we all have different storage and organization habits.
    Then when you find the missing files, on the new computer you can do add to library and go to the folder on the other computer where the missing files are - if your systems are networked - or sneak them over using a USB thumb drive or portable hard drive if you have lots of files, or if you like to have an extra backup of that music, copy to optical disc.

  • When updating itunes I get the message the install package can't find a file (itunes.msi) I've searched but can't find this file.  How do I install it?

    When updating itunes I get the message the install package can't find a file (itunes.msi) I've searched but can't find this file.  How do I install it?

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Error message when updating Itunes...can not open Itunes program

    I am recieving error message when updating Itunes for my computer.  The error message reads "MSVCR80.dll is missing and the other error message reads Error 7  (Windows error 126)"  I can not open my Itunes.  I have reloaded the Itunes onto my computer but still have the same error messages.  Please help.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99364)

  • I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the inst

    I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes.  I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.

    Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.

  • When playing iTunes from 2006 MacBook via Airport Express remote stereo speakers, the music keeps dropping in and out

    I've tried hours and a trip to the Apple Store to resolve this problem, and no luck so far.
    We have two Airport Expresses -- one is an older "g" version (from 2006), one is a newer "n" version (a couple of years old).
    We have one older MacBook (from June 2006) (so it can only use "g" wireless and also cannot be upgraded to OS X 10.7 "Lion").
    We have one MacBook Air and an iMac (both less than a year old), an iPad (about 2 months old), and a recently acquired AppleTV (in the past few weeks).
    We also have two iPhones that do use our local wireless network on occassion.
    We have stereo speakers that are currently connected into one of the Airport Expresses.
    For years (until the past few weeks) I played music from iTunes on my first generation MacBook to the speakers with no problems (using the older "g" Airport Express).  Recently, however, when playing music remotely over the speakers we have gotten fairly regular (though at random intervals) drops of the music in and out (drops are for a second or two each).  So far, here's what we've tried to do:
    (1)     Went to the Apple Store, where they thought the problem might be compatability between the g and n equipment in our house.  They suggested that we get an Airport Extreme and use that as the base so that 2.5 GHz and 5 GHz networks could each be set up, allowing the two systems to play nicely.  Spent a couple of hours setting everything up.  No dice.
    (2)     The skipping happens even when (a) I turn off the Apple TV; and/or (b) turn off the older Airport Express and just use the Extreme and the "n" Express (with the "n" Express as the connection to the stereo).
    (3)      When I have the wireless network drop-down menu selected on my MacBook, the skipping occurs immediately after the computer is "looking for networks" (as shown at the top of the menu).  The computer does this at random intervals on a regular basis.  The skipping, however, will occur even if the menu is not selected.
    (4)     Here's the weirdest part.  The skipping has even occured when playing iTunes from our newish iMac, with the older MacBook shut down, with the older Airport Express shut down.  In this case, the skipping only appears to occur when we have the wireless network drop-down menu selected and again, it occurs when the computer is "looking for networks" which occurs at random intervals.  In this situation, the skipping only seems to occur when the menu is selected.
    At this point, if I can't find another solution, I'm going to return the Airport Extreme, and just give up playing music over our stereo speakers from the MacBook (and instead transfer music to the iMac and play from it).  But I thought I'd try a last-ditch effort to ask for help to see if anyone could figure out what might be causing the problem.  I would chalk it up to the problems of using my old "g" network MacBook on a newer "n" system (though I'm not about to spend $1K+ to upgrade my laptop just for this), but for (4) above, which seems to indicate something else is going on.
    Any help would be most appreciated!

    Unfortunately, your description of the problem and the placement of both your main and AirPort Express routers does lend itself to believe the problem is most likely Wi-Fi interference. If it isn't the microwave or portable phones, it could be obstacles like walls between the routers that may be preventing the stream from consistently reaching the Express.
    In your configuration, the stream will first travel to the main router, and then, from the main router to the AirPort Express. If, for example, you started the stream in the same room as the Express, that stream would have to travel across several rooms at least twice.

  • Error when updating pages from template

    When updating pages from a template I have been occasionally
    getting this error message:
    While executing onLoad in Swap Image.htm, the following
    JavaScript error(s) occured:
    At line 325 of the file "Hard Drive: Applications: Macromedia
    Dreamweaver 8: Configuration: Behaviors: Actions: Swap Image.js":
    Reference Error: createObjRefs is not Defined
    I am on a Mac running 10.3.9, Dreamweaver 8.02.2809
    Any ideas on how to fix this?
    Thanks,
    Paul

    When updating pages from a template I have been occasionally
    getting this error message:
    While executing onLoad in Swap Image.htm, the following
    JavaScript error(s) occured:
    At line 325 of the file "Hard Drive: Applications: Macromedia
    Dreamweaver 8: Configuration: Behaviors: Actions: Swap Image.js":
    Reference Error: createObjRefs is not Defined
    I am on a Mac running 10.3.9, Dreamweaver 8.02.2809
    Any ideas on how to fix this?
    Thanks,
    Paul

  • Missing mscrv80.dll file when updating itunes.  what is it and how can I get it back?

    When updating itunes the new installation said I was missing mscrv80.dll file.  I've reinstalled but still doesn't work.  How can it be repaired?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • When updating itunes, it keeps saying invalid drive E, why does it look for drive e?

    When updating itunes, it keeps saying invalid drive E, why does it look for drive e?

    Try the following user tip:
    "Invalid drive X:\" install errors

  • "System extension cannot be used" when updating iTunes

    Every time I update iTunes through the standard Software Update, I get multiple messages towards the end of the installation saying:
    *System extension cannot be used*
    The system extension "/System/Library/Extensions/IOFireWireWDHID.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.
    This only happens when updating iTunes. Any ideas? Thank you in advance!

    Hello MaxGraphics,
    You both may want to read this article before proceeding. It does give you an idea about kext files and how to handle them.
    http://www.ihackintosh.com/2009/02/what-is-kextwhere-is-kext-how-to-install-kext /
    Hope this helps.

Maybe you are looking for

  • HOW TO UPLOAD BACKGROUND IMAGES IN SMARTFORMS

    HI HOW TO UPLOAD BACKGROUND IMAGES IN SMARTFORMS

  • Unable to get the first page of the current reprot

    Hi All, I am on SAP BO4.1 SP2 patch 2 . I am developing Webi reports in Webi rich client tool on SAP Bex quires and universe as data source . I have enabled the query stripping and merged the common dimensions between the Bex query and universe . Mos

  • Flashing gray question mark after 10.5.8 update?

    This isn't so much a post to ask for help, as it is just trying to see if anyone got the same result and what you had to do to resolve it. Yesterday I updated to 10.5.8 and it did it's install and then restarted the system. Upon restart, it did the i

  • When I receive an SMS message, how do I find out the phone number it came from?

    When I receive an SMS message from a person in my address book, the Messages app in my iPhone shows the name of the person who sent the message.  At the top of the conversation, I can tap the word "Contact", which brings up the Contact's name, a phon

  • Sound package n mp3...

    can i use methods provided by sound package to play mp3 files... if not then what all files can i play using sound package... can i use JMF for playing all sort of music files... ??