When using online QuickBooks I am unable to to see current bills in the 'pay one vendor' section. How can I resolve this?

In the 'Pay One Vendor' section of online Quickbooks I should be able to see a vendor's current bills and vendor credits. Unfortunately, ever since I updated to the latest firefox version I am unable to see the current bills. If I'm using Explorer I do not have this issue.

Yes, I already tried doing that. The customer service rep told me that she was using Firefox as well and that she was not having the same problem. I believe this must have to do with some kind of option I've selected. But I can't figure out which one. Everyone else I work with uses Firefox as well and they have not had this issue.

Similar Messages

  • I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes...  "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play.  How can I get this message to STOP?

    I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes...  "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play.  How can I get this message to STOP?

    Yes - I connected my phone to my computer / Itunes and went into the apps section, but from there I have no idea how to manage the push notifications.  I even tryied going into itunes that is installed on my phone.  I still cannot find anyplace to manage these popups.  I have also gone into settings - notifiations - and tried turning all notifications for these apps all off but that didnt work either.  Any guidance is MUCH appreciated - Im not sure where to go from here.

  • When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?

    When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
    All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
    I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
    Anyone know how I can do this? Thanks.

    Anyone?

  • I need to play a song on a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through the whole presentation ? Thanks.

    I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
    Thanks.

    Drag the file into the audio window in the Document inspector...

  • I already downloaded the ios 6.0.1 for my iphone when i connected my another iphone to update its asking again to download the ios 6.0.1  how can i use previously downloaded software

    i already downloaded the ios 6.0.1 for my iphone when i connected my another iphone to update its asking again to download the ios 6.0.1  how can i use previously downloaded software

    plzz help me as soon as possible

  • When using firefox on yahoo and opening my mail it says Not Found The requested URL /dc/launch was not found on this server. How can this be fixed?

    when using firefox on yahoo and opening my mail it says Not Found The requested URL /dc/launch was not found on this server. How can this be fixed?

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • When i am using my iphone 4 for calls the screen doesnt go blank so i keep cutting my calls off how can i resolve this ?

    when i am using my iphone 4 for calls the screen doesnt go blank so i keep cutting my calls off how can i resolve this ?

    Try removing your case... it might be interferring with the proximity sensor.

  • When I try to quit firefox, it hangs. I cannot force quit and I cannot restart. I tried the online help which directed me to uninstall, but I couldn't find library /application support. How can I fix this without having to turn off the computer?.

    I cannot force quit and I cannot restart. I tried the online help which directed me to uninstall, but I couldn't find library /application support. How can I fix this without having to turn off the computer?.

    Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

  • In my library of photos I have 1128 pics, but when I try to syncronize my iPod with these photos only I can save almost the half of pictures, How can I resolve this situation

    In my libray of photos I have 1128 pics, but when I try to syncronize my iPod, only can I copy the half of them, How can I resolve this situation

    See:
    iTunes: Unable to sync photos
    If yo are using the folder syncing method do you have all the photos in one folder?
    Is there anything different about the photos that do sync and those that do not?

  • When I am home, calls to my iPhone 5 also go to my other family members' iPhones.  How can I get this to stop happening?

    When I am home, calls to my iPhone 5 also go to my other family members' iPhones.  How  can I get this to stop happening?

    Or better yet, create and use new Apple IDs for others in your household. You could always use different Apple IDs for iCloud services (like iMessage and FaceTime) and iTunes and App Store., but it's even easier to share purchased content now with Family Sharing.

  • Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

    Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

    c.pfaffenbichler wrote:
    Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
    And what kept you from posting a screenshot?
    I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos.  You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
    It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image.  I've uploaded it at the size it was supplied to me at (about 2700 pixels wide).  So
    Click to open the full image, right click and copy, and paste into Photoshop.
    Select the clone tool, and set its blend mode to Darken.
    Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
    Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
    It works even better if you clone on a new layer also set to Darken.  No masking, just Photoshop blend mode magic.
    You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
    Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

  • When I click to open a PDF it opens in Adobe Photoshop Essentials in stead of Reader.  How can I fix this problem?

    When I click to open a PDF it opens in Photoshop Essentials instead of Reader.  How can I fix this problem?

    I'm using Windows 7 and don't know how to change my file associations.  Can you help me?
          From: ~graffiti <[email protected]>
    To: Keith McMillan <[email protected]>
    Sent: Wednesday, February 18, 2015 4:59 PM
    Subject:  When I click to open a PDF it opens in Adobe Photoshop Essentials in stead of Reader.  How can I fix this problem?
    When I click to open a PDF it opens in Adobe Photoshop Essentials in stead of Reader.  How can I fix this problem?
    created by ~graffiti in Adobe Reader - View the full discussionYou need to change your file associations so that Reader opens pdf files. How you do that depends on what OS you are using. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7207938#7207938 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7207938#7207938 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How can I move columns in Numbers without distorting the formula in other cells?  In Excel I can cut and paste entire columns and the formula in other cells adjusts accordingly.  When I do it in Numbers, the formula messes up.  How can I do this?

    How can I move columns in Numbers without distorting the formula in other cells?  In Excel I can cut and paste entire columns and the formula in other cells adjusts accordingly.  When I do it in Numbers, the formula messes up.  How can I do this?
    For example: I have formulas in columns D and F that relate to columns C to CU
    If I want to move one column from one position to another (say S to T), the formula loses the colums that was moved, i.e. it doesn't recognize it has moved, rather sees it as deleted...  How can I do this without distorting the formula?

    Thanks for the feedback.
    If I often urge askers to look at the available resources, it's because  a large range of questions asked in the forums are already answered in these documents.
    As they are PDFs, they are easy to search in.
    CAUTION
    Download them while they are available.
    Given what is delivered with iBooks Author, I'm afraid that we will not get such easy to use documents.
    Searching infos in the  iBooks Author documentation available on line is awfully cumbersome and a lot of embedded links are wrongly flagged this way. In the Help files they aren't links but underlined strings.
    It seems that the tool used to generate the web pages was wrongly configured.
    Yvan KOENIG (VALLAURIS, France) dimanche 22 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
    My iDisk is : http://public.me.com/koenigyvan

  • All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"?

    All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"? My Lightroom release is 5.7.1.
    Thanking you in anticipation!

    I'd like to get all these '-1 suffix' files together with their associated Develop adjustments into one folder (if they aren't already) so I can see them in Grid view in the Library module, which I use as my basic starting point for everything else at this early stage of my Lightroom 'career'.
    To see what folder these are stored in, right-click on a photo and select "Go to Folder in Library".
    Advice: if you are going to use Lightroom effectively, you probably want to stop using folders as your method to create a grouping of photos that are already in Lightroom; there are plenty of built-in tools, such as keywords, collections, color labels, etc.
    I don't understand why the search on the entire catalog picked up apparently the same two file versions but also got the Develop adjustments when going to the relevant Folder didn't show the adjustment black squares against each image in Grid view nor were they there when the images were opened in the Develop module.  Perhaps if I understood this, I'd be a bit more confident of moving forward myself.
    These are most likely different versions of the same photo, in different folders. Lightroom stores the edits in its own catalog, and so it knows that one folder's photos have edits, and the other folder's photos do not have edits. Please understand that Lightroom is a database, it knows where the photos are at the time you import them (or add them to the catalog by synchronize), and then if you move things around in your operating system, Lightroom does not know anything about that and problems begin. Thus the advice to organize using Lightroom tools and methods and not operating system tools and methods.

  • RAW JPEG PROBLEM  I'm new to Aperture and neglected to mark RAW JPEG pairs when I imported (from iPhoto).  Now I have two images for each photo.  Help!!  How can I change this?

    I’m new to Aperture and neglected to mark RAW+JPEG pairs when I imported (from iPhoto).  Now I have two images for each photo.  Help!!  How can I change this?

    How did you import from iPhoto? If you saw the Import panel with raw -jpeg pairs, then you probably did not import your iPhoto library as library, but as files, and then you will see plenty of duplicates - previews, thumbnails, originls, edited versions. If that should be the case, it would be better to delete the import from iPhoto and to import your iPhoto library again, but this time using "File > Import > Library".
    Only that would require compatible versions of iPhoto and Aperture.  What are your Aperture and iPhoto version numbers?

Maybe you are looking for