When using Parallels for Windows 7, I cannot connect to Wi-Fi. I get drop down menu "Real Network Adapter Thunderbolt Bridge used by Virtual Adapter 1 is not connected to the network". How do I fix?

When I try to connect to internet wirelessly (Parallels/Windows 7 on my Mac Pro) I get a drop down that says "Real Network adapter thunderbolt bridge used by virtual adapter 1 is not connected to the network". I can not figure out how to connect - any help is appreciated!

Since you are having trouble with Parallels or Windows, did you ask in their respective support forums? If not, you might want to consider doing so.

Similar Messages

How do you Make an Interactive Drop Down Menu in Adobe Acrobat Pro That Uses Hyperlinks?

Hi first off let me point out and apologise in advance for my ignorance and possibly my misuse of the correct terms, I'm new to this.
Anyway here goes, my best attempt to try and explain myself. Using Adobe Acrobat Pro I am trying to create a drop down menu that lists a set of documents. Once you click an item in the drop down menu it then opens up the corresponding document. So far example the Menu reads "Documents" and below it there is three options "Dogs" "Cats" "Hotdogs" when you click on "Hotdogs" you open up the document for hotdogs etc.
I have actually done it once before using Javascript and a combo box and I think basically you buried the links to documents in a series of bookmarks, the Javascript code then was basically a shortcut to activate those bookmarks.
So in short, could someone please tell me the code I would need to make this happen? I have looked extensively for the right forum post to see if my question has already been covered but I couldn't find anything and I possibly could have been using the wrong search terms.
Please ask me to clarify anything to help you understand what it is I'm asking.
Thank you in advance for all your help.
Elliot.

Hey I think I found a solution to my own problem I made an "OK Button" right click>properties>actions>select action>run a javascript>add - and executed this code:
function searchBookmarks(bkm, nLevel, bkmName)
if ( bkm.name == bkmName ) return bkm;
if (bkm.children != null) {
for (var i = 0; i < bkm.children.length; i++)
var bkMark = searchBookmarks(
bkm.children[i], nLevel + 1, bkmName);
if ( bkMark != null ) break;
return bkMark;
return null;
function bookmarksAsPopUp(bookmarks)
   if(bookmarks && bookmarks.children)
     for(var i=0;i<bookmarks.children.length;i++)
bookmarkName = bookmarks.children[i].name.replace(/\s{2,}/g,' ');
while (bookmarkName.indexOf(String.fromCharCode(11)) > 0)
bookmarkName = bookmarkName.substring(0,bookmarkName.indexOf(String.fromCharCode(11))) +" "+ bookmarkName.substring(bookmarkName.indexOf(String.fromCharCode(11))+1)
popUp = popUp+"{cName: '"+bookmarkName+"', cReturn: '"+bookmarkName+"'" ;
if(bookmarks.children[i].children)
          popUp = popUp + ", oSubMenu: [";
   bookmarksAsPopUp(bookmarks.children[i]);
   popUp = popUp + "]";
popUp = popUp+"}";
if (i != bookmarks.children.length-1)
popUp = popUp+", "
   return popUp;
var popUp = "";
bookmarksAsPopUp(this.bookmarkRoot);
var cChoice = eval("app.popUpMenuEx(" + popUp + ")" ) ;
bkm = searchBookmarks(this.bookmarkRoot, 0, cChoice );
if ( bkm != null ) bkm.execute();
Then you can just add your own bookmarks and they populate the pop-up menu automatically (including the hierarchy sub menu structure, you nest bookmarks within a main book mark.) which is a more efficient way than the one I used before.
I take no credit for this by the way my source is here PDF Bookmarks as a PopUp Menu | The Practical:PDF Blog
I hope this helps anybody looking to do the same.

HT203176 When I delete a file, it does not appear in the Trash - How can I fix this. Its a brand new MacBook Pro 17'

When I delete a file, it does not appear in the Trash - How can I fix this. Its a brand new MacBook Pro 17''

http://www.thexlab.com/faqs/trash.html for starters.

HI! I am using iTunes with Windows 7 64bit.after upgrading itunes to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

HI! I am using iTunes with Windows 7 64bit.after upgrading itunes to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

Refer this article to reset Winsock to it's default. Your PCTools may have inserted LSP.
http://support.apple.com/kb/TS4123?viewlocale=en_US
After reset and restarting windows, you may get a prompt to remap LSP, click no.

Using parallels for windows xp on my macbook

Hello. I want to take online GIS classes from ERSI this winter and am thinking about buying parallels to run their software (which is only supported by windows xp or vista). I am basically pretty computer illiterate and am not really sure about the most cost efficient way of setting this up. I know I have to buy parallels (or bootcamp, which is better for this case?), then buy the windows software, then install and hope for no hiccups the GIS training software (which is not supported by the ERSI online team when run on a mac). Has anybody gone through this specific or related procedure before and what kind of results did you have? Is my plan sound? With my tiger operating system do I still have to buy bootcamp, is that better to use than parallels? I don't have any other plans to use windows except maybe to send photos through my hotmail account. I will greatly appreciate any advice and/or direction you can provide. Thank you,
Dave

Hi,
I use Parallels with Windows XP and it runs just fine. I need Windows for one application that is not any where to be found for Macintosh. Follow the Parallels directions for installation and you should have any problems. To use Bootcamp you would need to be running Leopard.

After navigating (sometimes downloading pictures, sometimes not) for approximately 10 minutes, I can no longer see contents of drop down menues, then Firefox freezes up and I have to use Ctrl/Alt/Delete to end my internet experience.

After navigating (sometimes downloading pictures, sometimes not) for approximately 10 minutes, I can no longer see contents of drop down menus, then Firefox freezes up and I have to use Ctrl/Alt/Delete to end my internet experience.
== This happened ==
Every time Firefox opened
== After upgrading to 3.6

Step by step, how did you arrive at seeing this agreement?

How do you get drop down menu in Yosemite to not drop down?

When I try to enter a URL or address into the window at the top of the Safari screen in Yosemite, a drop down menu appears with a bunch of icons on it which blocks the screen. I need to see the screen when I'm entering a URL line. How do I get the drop-down with the icons on it to go away?

How to get drop down menu

hai plz help me
how to dovelop a drop down menu for a field in selection screen

Hi
Hope it will help you.
Pls reward if help.
REPORT zwa_test2.
TYPE-POOLS : vrm.
tables: bkpf.
DATA : values TYPE vrm_values.
DATA : wa LIKE LINE OF values.
PARAMETERS : list_box(10) TYPE c AS LISTBOX VISIBLE LENGTH 10.
PARAMETERS: dd type bkpf-BSTAT user-command abc.
select-options: a for bkpf-bukrs MODIF ID buk.
select-options: b for bkpf-belnr MODIF ID SEL.
at selection-screen output.
If list_box = 2.
    loop at screen.
      if screen-group1 = 'SEL'.
        screen-input = 0.
        modify screen.
      endif.
     endloop.
   endif.
INITIALIZATION.
wa-key = '1'.
wa-text = 'Orange'.
APPEND wa TO values.
wa-key = '2'.
wa-text = 'Red'.
APPEND wa TO values.
wa-key = '3'.
wa-text = 'Blue'.
APPEND wa TO values.
wa-key = '4'.
wa-text = 'Gray'.
APPEND wa TO values.
CALL FUNCTION 'VRM_SET_VALUES'
       EXPORTING
            id              = 'LIST_BOX'
            values          = values
       EXCEPTIONS
            id_illegal_name = 1
            OTHERS          = 2.
Ref Program: DEMO_DROPDOWN_LIST_BOX
Link: Need a drop down for a selection screen

Can't get drop down menu for uploading to YouTube (Pre8)

I have uploaded projects to YouTube before but for some reason this time, I don’t get an active YouTube location bar to give me the drop down menu to log on, etc. Share / Online / Online: Choose location and settings: Photoshop.com and My Website do work, but not YouTube or Podbean.

Sorry Steve for not replying earlier.
I will try that next time I run Pre8.
Thanks for all you do....Dave

HT203167 I purchased the full book from the iTunes Store after reading the sample but the full length will not download only the sample how do I fix this?

I purchased a full length book after reading the sample but only the sample will download how do I fix this as the full length book appears under purchased books?

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

The apple mobile device is not working on the ipad. how can i fix it?

My apple mobile device is not working on my ipad and my itunes dosn't work now. How can I fix it?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

I recently bought a new computer and cannot get my ipod to sync from this computer. My purchased songs are also not on iTunes anymore? How can I fix this?

I recently bought a new computer and I cannot get it to sync with my iPod. I also cannot see my purchased songs in iTunes on my new computer? I'm not sure how to fix this.

follow the steps given here...
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

HT6413 I keep getting a installation pkg error when installing icloud for windows 7 on my pc.

I keep getting an windows installation error when installing icloud for windows 7. I have tried installing manually without success.

There is a very long way which is removing anything related to Apple including stuff in the registry.
The short way is as follows. It worked for me.
I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
1. Remove the Apple account from Outlook. In my case a me.com account.
2. Disconnect the connection to ICloud in the control panel of version 3.1.
REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
and C\Program Files\Common Files \Apple. My computer is 64 bits.
5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud. I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
6. then I was able to install ICloud 4 immediately. Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

When I upgraded to 10.7.4 I lost the ability to use a lot of my previous software that was intel based. My Adobe suites for example. So for $29 i now have to spend $1000's to get these to work. What has changed with Mountian Lion. I am not rich/

When I upgraded to 10.7.4 I lost the ability to use a lot of my previous software that was intel based. My Adobe suites for example. So for $29 i now have to spend $1000's to get these to work. What has changed with Mountian Lion. I am not rich?

The reason your applications do not work in Lion/Mountain Lion is that they were written for the older PowerPC CPU that all Macs used up to 2006. When Apple made its transition to the Intel CPU, they licensed software that they included in all versions of OS X (from Tiger to Leopard and optionally, Snow Leopard) called Rosetta.
Rosetta miraculously allows PowerPC applications to work on the Intel processor transparently; you do not know it is even present.
The problem is that after 6 years of the transition, Apple's license to use the underlying software expired for OS X Lion and all version thereafter (and it is doubtful that the current owner of the software, IBM, would relicense it, even if Apple were inclined to do so).
So you do not have to accept recriminations from others for previously using Rosetta without even knowing it was present and running!
So for those of use that need to upgrade to Lion/Mountain Lion, I have offered the option to install Snow Leopard (with Rosetta) into Parallels 7:
[click on images to enlarge]
And now Mountain Lion:
If you are unable or unwilling to update your inventory of PowerPC software, this solution offers you an alternative for not more than the $29 cost of Snow Leopard and $79 cost of Parallels (cheaper via internet sources).
Full Snow Leopard installation instructions into Parallels 7 are here:
http://forums.macrumors.com/showthread.php?t=1365439
Assistance with the installation process is available on this linked forum.

Drop down menu to populate fields used for testing

Hello,
I have asked a few questions on here and everyone is very helpful thank you
My current question is related to drop down menus.
What I want to do is have the end user be able to select the testing item from a drop down menu and all of the values associated with testing that item.
The associated values will need to be used in the testing function so the test can run properly.
Things such as offsets, loads, and other values are what I am talking about.
To clarify...
have a drop down menu where you can select which item you are testing, and once selected have the associated parameters populate and be used during the test.
After searcing the forums for a few hours I was un able to find any other question or example similar enough to what I am trying to accomplish
Thank you!

mrrcx wrote:
Hello,
I have asked a few questions on here and everyone is very helpful thank you
My current question is related to drop down menus.
What I want to do is have the end user be able to select the testing item from a drop down menu and all of the values associated with testing that item.
The associated values will need to be used in the testing function so the test can run properly.
Things such as offsets, loads, and other values are what I am talking about.
To clarify...
have a drop down menu where you can select which item you are testing, and once selected have the associated parameters populate and be used during the test.
After searcing the forums for a few hours I was un able to find any other question or example similar enough to what I am trying to accomplish
Thank you!
hi mrrcx,
You can use ring, enum or combo box. please see attached example, hope this help
Attachments:
drop down menu.vi ‏10 KB

When using Parallels for Windows 7, I cannot connect to Wi-Fi. I get drop down menu "Real Network Adapter Thunderbolt Bridge used by Virtual Adapter 1 is not connected to the network". How do I fix?

Similar Messages

Maybe you are looking for