When we do a failover to a Replica, what happened to the connected clients? Assuming that the Replica is located in a remote DR site with a different IP configuration.

When we do a failover to a Replica, what happened to the connected clients? Assuming that the Replica is located in a remote DR site with a different IP configuration.
Hi,
I need some guidance here, please.
I have some questions about replication:
When we do a failover to a Replica, what happened to the connected clients? Assuming that the Replica is located in a remote DR site with a different IP configuration.
Is possible to automate the failover process? Just like happens in a cluster.
What changes do I need to do in order to guarantee that my clients reach my replica? For example, I need to do a failover to my Exchange Server Replica and I need to minimize the downtime. The same applies for a DC or a SharePoint Server
Thanks in advanced.

Hi efebo,
“The same applies for a DC ”
As for replicating virtualized DC (Personally, I do not suggest to replicate DC , even though it can be replicate ), please refer to following link:
http://technet.microsoft.com/en-us/library/dn250021.aspx
"In short, Exchange does
not support the Hyper-V Replica feature. Exchange has a long history of supporting virtualisation from
Exchange 2003 onwards. It is fully supported to install Exchange
2007,
2010 or
2013 as a virtual machine on Hyper-V, but using the Hyper-V replica feature is not supported.
For details please refer to following link:
http://blogs.technet.com/b/rmilne/archive/2013/07/29/exchange-and-hyper-v-replica-support.aspx
I assuming that the "Remote DR site" and the primary site both have public IPs .
Based on my knowledge you can not access replica site VM directly after a disaster , maybe you need to rebuild primary site and replicate VM back .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

What happens to the open item in bsid table when it is cleared

hi experts,
i have a doubt about open and cleared items of accounting documents. as we know open items of customers are stored in bsid and cleared ones in bsad. For suupose, an open item is closed ina particular period then what happened to the entry in bsid and bsad table. an entry regarding is stored in bsad (cleared),and what happens to the entry in bsid, still it will be there or removed from it.

Hi,
When ever we clear the document(Complete payment) that document will be moved to BSAD table. Other wise it will remain in BSID.
If u are making partial payment then all the partial payment documents along with original document will be stored in BSID till u made the complete payment for that invoice.
Assumption is u have to give all partial payment documents made for particular invoice item while u are making complete payment in F-28 transaction. So that these partail payment documents will also be cleared while making complete payment and moved to BSAD table.
This trasaction can be used for both partial and complete payments.
Irrespective of complete or partial payments made all the documents will remain stored in BKPF and BSEG tables.
BSID and BSAD are index tables to address performance issues with BKPF and BSEG tables.
So all open and cleared documents will be there in BKPF and BSEG tables.
All cleared documents will be there in BSAD table.
Alll open documents will be there in BSID table.
Hope it is clear.
Thanks,
Vinod.

TS2972 I just updated all of our computers to itunes 11 and now when we try to use our home sharing, we can't import songs. What happened to the easily located "import song" feature? I wish now that I wouldn't have updated to the new itunes 11.

I recently updated all of the computers in the house to itunes 11. Now when we try to import songs from homesharing, we are unable to. What happened to the conveniently located "import song" button on the old version of itunes. Please help an old mother out please!

diesel vdub, i use 11.1.1
solved the issue today. first sync with itunes, so all the stiff you bought on the mobile will be backuped.
1. uncheck sync music in itunes and sync. all the music will be erased from mobile device
2. check music player on the mobile device. just the unwanted songs will still be there
3. go on the iphone to settings, general, usage, music player. there is just a few mb from the remaining unwanted songs. swipeleft and erase the content. switch iphone off and on again
4. repeat step 2. there will be no data. otherwise repeat step 3
5. check sync music in itunes and sync. all the music will be back again but not the unwanted songs.

What happened to the nifty "sync" button in iTunes? It syncs as soon as I plug it in, and that's great! BUT! When I go to the iTunes Store and buy new stuff, I can't just 'sync' the device again so my new stuff gets added. Why?

What happened to the nifty "sync" button in iTunes? It syncs as soon as I plug it in, and that's great! BUT! When I go to the iTunes Store and buy new stuff, I can't just 'sync' the device again so my new stuff gets added. Why?

Nothing happened to it.
It is still there. Maybe it says apply now, not sure, but it is still there.

What happens to the outputs when I reconfigure the 6524 card?

I have an application where I want to recongure the card throughout my program. For example I might initially want to set a single 8 bit port, so I could use Dig_Prt_Config and Dig_Out_Prt. Then I might want to output a batch of data using buffered IO so I use DIG_Block_PG_Config and DIG_Grp_Config to configure the card again. My question is what happens to the output states when I do this. If the port is then assigned to a group what happens to the outputs at that point? Do they remain unchanged until I do a Dig_Block_Out or do they all turn off? I guess I will find out when I try it, but it would save me from throwing away code if I knew now,
Thanks,
David

David,
I assume you have the 6534 board. On the 6534 board, reconfiguring the port will not affect the output value. Well, as long as the direction map doesn't change. Anyway, hope that helps.
Ron

When I edit and/or delete photos from an album in iPhoto is there a way to make that what happens in the folder in finder?

When I edit and/or delete photos from an album in iPhoto is there a way to make that what happens in the folder in finder? I am new to Mac. I've updated the operating system and iPhoto.

If your iPhoto Advanced preference pane is setup like this
all photos you import into the library are COPIED into the library. Thus those photos in the folders outside of iPhoto are redundant and can be deleted to save space on your hard drive. There no need to keep those copies in the folders.
If you do have your advance preferences set as shown above you can access your photos for use outside of iPhoto according to the following User Tip by Terence Devlin which is the best treatise on how to access photos (for use outside of iPhoto): How to Access Files in iPhoto. Otherwise you access your photos from within iPhoto.

I purchased i phone 3GS from San francisco thro my brother, when i brought to oman, i want to update ios 5 to ios 6 for that from itunes to start update , finally failed and i could not able to configure in oman wifi network, i dont have backup..help me..

i purchased i phone 3GS from San francisco thro my brother, when i brought to oman, i want to update ios 5 to ios 6 for that from itunes to start update , finally failed and i could not able to configure in oman wifi network, i dont have backup..help me..

Has your phone ever been hacked or jailbroken. This error message is what usually shows up for that. Are you using a supported carrier for the iPhone, or did someone hack the phone to unlock it to be used on another carrier. If that is the case, then there is no help you can get here as discussing hacked/jailbroken devices is not allowed.

HT203477 it says save operation could not be completed when I make a new project... what happened?

it says save operation could not be completed when I make a new project... what happened?

This is happening to me as well. No solutions from anyone. When it happens, it does not matter which drive I try to save to ... it won't create a new event or project ANYWHERE. I usually have to reboot.

What happens if the exception occurs in a thread when it has a lock

what happens if the exception occurs in a thread when it has a lock
on object. Is the lock released ?

Rastogha wrote:
ok so lock is released if we are putting code in try-catch block. . right ?
1) But suppose what abt runtime exceptions which i am not catching. It doesn't matter what kind of exception it is. The lock is released when control is transferred outside the sync block.
2)Also the thread will be suspended in both the cases or not ( both cases mean for runtime exception and checked exception)Again, the kind of exception doesn't matter. Whether you're in a sync block or not doesn't matter: When an exception occurs, control transfers to the nearest catch block that can handle it. If you don't provide a handler for it, the thread terminates.
If something is not clear, post code that shows the specific situations you're curious about. Make sure you use the CODE button or [code] and [/code] tags.

You guys know what happens to the money it paid for mobileme what happens when you pass the iclud?

you guys know what happens to the money it paid for mobilemewhat happens when you pass the iclud?

No. That is how Apple has it set up.

What happens in the back ground when you schedule a Sales Order?

Gurus,
What happens in the back ground when you schedule a Sales Order?
Assemble to Order scenario.
Edited by: 792050 on May 17, 2011 3:24 AM
Edited by: 792050 on May 17, 2011 3:24 AM

If I merge libraries and then back the merged libraries up onto an external drive or DVD, do I just back up the libraries themselves, or do I also back up the original files?
If you're running a Managed Library, then backing up the Library also backs up the original files.
I ask because my HDD is getting pretty full. I want to reduce the amount of stuff on it, and the iPhoto libraries are the biggest single consumer of space at the moment (Nearly 100GB).
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD
P.s. If you're running a Managed library, then it's the default setting, and iPhoto copies files into the iPhoto Library when Importing
If you're running a Referenced Library, then you made a change at iPhoto -> Preferences -> Advanced and iPhoto is NOT copying the files into the iPhoto Library when importing.

What happened to the Large and Display choices when exporting?

What happened to the "Large" and "Display" choices when exporting slide shows?

They were removed.

What happened to the Podcast fast forward 15 sec function in the lock screen? It went away when I upgraded to iOS 7.1.

What happened to the Podcast fast forward 15 sec function in the lock screen? It went away when I upgraded to iOS 7.1.

I thought the same thing, until I saw there is a podcast update as well in the app store, that fixes this.

I wish to recycle a number of macs. What happens to the hard drive when sent to Simms? Do I need to dismount them?

I wish to recycle a number of macs. What happens to the hard drive when sent to Simms? Do I need to dismount them?

Hard drives don't die then come back to life. Your drive never died. You just thought it did.
Obviously, if a hard drive isn't on and spinning its life is longer than when it is always on and spinning. If a hard drive in a laptop is idle it goes to sleep. That's normal because it prolongs battery life. Of course it hardly matters if the computer is running on AC power. The drive may still go to sleep but there's no impact on the battery.
If the computer is in use 24/7 then its useful life will be less than if it's in use only 12/7 or 8/7. This is both logical and obvious. But in the long run all computers or their hard drives fail. There is little you can do to prevent that. They are meant to be used. If your life is dependent on the computer being usable, then buy another one as a spare. Or at the very least buy a backup drive, keep the computer backed up, then you can worry less about drive failure.

TS5376 What happens to the audio, music, etc. that I've uploaded to iTunes that I didn't purchase through iTunes when unstalling iTunes?

With the iTunes runtime error, the only solution seems to be to uninstall iTunes. If I can't open iTunes as it currently the case because of this issue, therefore I can't backup. What happens to all the audio CDs, books, etc. that I've uploaded to iTunes that I didn't purchase through iTunes when uninstalling. Can I be assured that these are in the Cloud also?

See Troubleshooting issues with iTunes for Windows updates.
There is a link to an iTunes library backup tip within, along with other advice on getting iTunes reinstalled and working again.
You don't need iTunes to be working to backup the library. You do need iTunes to be working to backup or restore your device...
tt2

When we do a failover to a Replica, what happened to the connected clients? Assuming that the Replica is located in a remote DR site with a different IP configuration.

Similar Messages

Maybe you are looking for