When working in the basement for an extended period I get SOS message and have to turn my phone off and on before I can use it is this normal
When working in the basement for an extended period I get SOS message and have to turn my phone off and on before I can use it is this normal
when the phone detects the Optus network, this will automatically go out of the SOS mode.
The SOS mode allows you to call SOS numbers like 911 or 112 even if there is no network coverage.
What it does it tap to the next available carrier (regardless if this is your home carrier or not) to have the emergency call pushed through)
Similar Messages
-
I installed bootcamp 4.0 4033 so that I can install windows 7 32 bit on my mac. Everything works fine until I try to install the drivers and I get an error message stating the version of windows does not work with the drivers I am trying to install. I have a feeling somehow I am downloading 64 bit drivers when I need 32 bit. I spoke to Apple and they said I can't use 32 bit windows.. but that is not what the support site says (it says I can as long as I use bootcamp 4, not 5). Also, my bootcamp assistant is version 5.. I have no idea if that matters. Help please.. been searching online for hours.
What model/year is your Macbook Pro? What operating system version?
-
My 4s has no sound on most of the outgoing calls i make. It will ring the other phone I am calling but I cannot hear it nor can they hear me when they answer. Its just dead air but my phone timer is in use. How can this be corrected?
It's very possible that you have stuff running in the background that you don't even realize you have running. For example the default is for all notifications to be on and you usually need few to none of them.
That said, while an iPad can run warm, too hot to handle isn't right. ALso you should get about 10 hours....depending on what you're doing of course. If you're doing processor intensive stuff, like gaming and videos it can drain faster and generate more heat.
I would say if you have an apple store near by, make an appointment and have them check it out. If the issue is due to what they determine to be manufacturer's defects then it could fall under the warranty. But that's up to the store to determine. -
After I upgraded my Iphone 4 with the ios 7.1.1 it locks up while sending text messages. I can usually send a few then will have to restart my phone(often more than once) to get it to send and receive messages again. I have done a back up and complete reset and that has not fixed the problem. Have been told that the ios 7.1.1 just isn't compatible with the Iphone 4 so that's why it is locking up so often, but I am hoping someone else may have a better answer since it can't be undone. Thanks!
7.1.1 is certainly compatible with the iPhone 4. Just try a reset first.
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
I am trying to download a font I've purchased previously (in 2006), but when I click the Download link in My Orders, I get a message that I have no downloads. How do I download a font I've already paid for?
Ericsvaren please make sure the date range selected is sufficient to include the order for your font. I would also encourage you to make a local back up in case you need the font again in the future. You can find more information on how to download purchased software and fonts at Find a download link on Adobe.com.
-
My wifi button is frezon and I tried turning my phone off for a period of time and reset my phone but the button is still frezon it want slide over to turn on my wifi. Is there any other way to fix without going to apple to get it fixed?
Hey Posada143, You can still try the rice thing, but do not expect much, as roaminggnome has stated. The rice only works if you do it ASAP and leave the iPod off-- do not attempt use, turn on or charge until it is completely dried out. This is probably academic at this point but remember this for the next time: The drying can take 10 days. You put the uncooked rice and iPod in a sealed bag, change the rice every couple of days. This creates a low humidity environment and draws the moisture out of the iPod, but it takes time. Turn your iPod on to earlier, and you run the risk of shorting out, damaging the components inside. Even if done correctly it can spotty. If you do get the iPod to work (and this may require Resetting, Restoring or attempting to place it in DFU recover mode) the first thing you do is make backups, because you never know how long it will continue to work. As for your pictures, if you can't get your iPod to work, you can try data retrieval companies, however; there is no guaranty it will work and it tends to be very expensive. In the future get in the habit of as making backups, because you just don't know. And invest in and use a water tight case. Hope this helps, Good luck. Cheers.
-
Every time I try to open my iTunes app on my iphone 4 s it opens but then shuts down right away. I have already turned my phone on and off and did the reset thing by pushing the home and sleep button together and I hooked up my phone to my computers to update and none of these have worked. What works? Does anyone know? Thanks
Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick -
Hello,
I turned my phone off and now it won't come on. The Apple will come on but goes off and the screen is back when its off.
Thanks in advance for any assistance you may be able to provide.Was the Battery Charged..?
Ms Nick wrote:
I turned my phone off and now it won't come on.
See Here for > Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
I activated advanced calling and after I turned my phone off I still dont have the feature. Any suggestions?
Shaq2393, you have an excellent device! Here's everything that you need to know about advanced calling on your device: http://vz.to/1qjLIbG
LasinaH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/
Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter -
My imessage has been sketchy lately. One text it will say my iMessage has been delivered the next I have to send it as a text message. I've tried turning my phone on and off and turning iMessage on and off repeatedly. How do i fix this problem?
It takes two to tango, maybe it's your recipient that has weak Internet/Cellular connections.
-
I have an iPhone 4S with sprint. I had to replace my phone after the new update killed my wifi button and wouldn't let me turn my phone off. Since I've had my new phone, I haven't been getting 3G. I have tried resetting my networks, Turing airplane mode off/on and restarting my phone. Nothing seems to work. Any info on what I should do next would be great.
If you have set this phone up, then there would not necessarily be a solution here until you have been verify with the provider that everything is provisioned correctly on their end. Since the 3G comes from your cellular provider, if the settings are correct on the phone, then you should work with the carrier next.
-
IPhone camera isn't working.
if the camera stays black when trying to use it in any application it is likely a hardware issue at that point because the aperture on the camera isn't opening. the only way to is that is by actually having the iPhone repaired through an apple store or through contacting apple support and going through a mail in repair.
if the iPhone is out of warranty though there would be a cost to have it repaired and it may end up being cheaper to take it to a third party to have them repair or replace just the camera. -
When I press the home button my iPad won't go to he home page. It is as though the button isn't working properly?
Try this to calibrate your home button:
Open a stock iOS app (e.g., Clock). Once the app is open, press your iPad’s power button until the ‘slide to power off’ screen appears. From that screen, press and hold your Home button until iOS force quits the stock app you have open. You’re done! -
I am attempting to set up a guest network on the Airport Extreme Base Station. The Base Station is connected to a DSL Modem. The network is also extended using an Airport Express. When I have attempted to set up the Base Station using DHCP NAT in the netword feature I get a message that because the service has a private IP address the only way that I can connect is in Off Bridge Mode. In this mode I do not seem to be able to connect to the internet using the guest network. Any suggestions would be helpful.
Ok, your Speedport is actually a combination DSL modem and wireless router. In this case you would typically configure a downstream router, like your AirPort Extreme in Bridge mode. Unfortunately, when in Bridge mode, the AirPort does NOT support providing a guest network.
The only possible option is to reconfigure the Speedport as a bridge and use the Extreme as your Internet router. You would still need the DSL modem provided by the Speedport for Internet connectivity.
Maybe you are looking for
-
HP Officejet Pro 8600 e-All-in-one 9
Since up-dating my MacBook to Yosimite it is very difficult to get the printer to open a connection. That system is 10.10.1 and that is Not listed in the driver materials.
-
How to stop Time Machine from trying to resize a sparse bundle
With 10.8, I'm backing up wirelessly from my MacBook Pro to a sparse bundle on a Drobo connected to a Mac mini on the same network. I used Drobo's Time Tamer to create the sparse bundle. The sparsebundle is a set size and cannot be resized (this is i
-
How to Insert all Records together using JDBC Receiver Adapter.
Hi, Suppose, I have to send 5 records and from R/3 (using client Proxy) using XI and insert/update all these records in a database. In case I want to update all the 5 records else mark it as fail and return the response synchronously to R/3, what sho
-
We support 3 different company databases(A,B,C) with the same exact structure for each one and they all use the same application. How can I query a table common(but each in its own database location) to all three? Each company database has an Employe
-
JavaFX progress bar with glow effect.
I am hoping someone can help me with this issue. I recently followed James Clarke example of a progress bar with glow effect and it helped with developing a progress bar for an application I was working on. But now, with the JavaFX sdk 1.2 update, th