When you take a snapshot of the desk top where is it saved?

When you press Control-Command-3 for a snapshot where can I find it?

There is also:
Command-Control-Shift-3 - Capture entire screen
Command-Control-Shift-4 - Drag to select copy region
Command-Control-Shift-4-Space - Capture Window under cursor
If you want a menu or pop-up, then do the
Command-Control-Shift-4-Space
after the menu or pop-up is setup as you like it.
Now paste the clipboard into whatever document accepts graphics.
I also like the utility Skitch, as it lets you add circles, arrows and a description to what you have captured <http://skitch.com/>.

Similar Messages

  • When you take a snapshot of a piece of a document where does it go?

    when you take a snapshot of a piece of a document, like a logo, where does it go?

    Your clipboard. Just like it dos when you copy anything.

  • Is a new iPad 2 fully charged when you take it out of the box?

    hi, do Ipad 2 come charged and ready to be tested? my friend will be testing for me, but he has not used ipad before and neither have i. does the ipad need to be fully charged, then set up first before testing it?

    Mine came with 87% charge, but they must be activated using an itunes account (and a computer) before you can use them. If you get it from an Apple Store, they can activate it for you.
    Glor

  • What happens when you take your iPod into the apple store for battery replacement?

    I am taking mine in tomorrow. How do they decide if your battery is bad enough to get the iPod/battery replaced? What do they do with your iPod? Do they mess with the apps and data?? Do they search your history to see what you've done on it? HELP!

    By reading the following, Apple exchanges your iPod for a refurbished (includes new battery) iPod. Data is no preserved/restore to the replacement
    Apple - Support - iPod - Service FAQ
    Will the data on my iPod be preserved?
    No. You will receive a replacement iPod that will not contain any of your data, songs, or after-market personalizations. Before you submit your iPod for service, it is your responsibility to keep a separate backup copy of the data stored on your iPod and reinstall that data.
    Attention iPod touch customers: Before obtaining service, it is important to back up your data using iCloud or iTunes. Apple is not responsible for the loss of information while servicing your iPod touch and does not offer any data transfer service.
    Following service your replacement iPod touch may have a newer operating system (iOS) version and you will need to restore your data using the method used to back it up (iCloud or iTunes). As a result, you may also need to update your App Store applications to ensure compatibility with the newer iOS. If you experience a problem with an application purchased from the App Store, check iTunes to see if an update is available or contact the application vendor directly.
    However, I have heard in this forum that sometimes Apple will just replace the battery.
    If you are concerned I would do one fine sync/backup and then go to Settings>General>Reset>Ease aall content and settings.

  • I has to have my harddrive wiped and I reinstalled Mozilla Firefox but now it will not start when I click on it on the desk top?

    I have used Mozilla Firefox on my lap top before and it worked well. However, since I had to have my harddrive wiped, I had to reinstall Firefox and now everytime I click on the icon to start it, my computer bluescreens! I do not know what to do?

    Did you reinstall from backups, or www.Mozilla.org?

  • How do you transfer reorganized bookmarks from the desk top to a laptop in the same network?

    I recently reorganized all my bookmarks into folders on my desktop. When I signed on to Firefox with my laptop the bookmarks were still unorganized. How can I transfer my new organized bookmarks over to my laptop?

    * Backup your DesktopComputer's Bookmarks -> [[Backing up and restoring bookmarks#w_manual-backup|Manual Backup]]
    * Save the '''json''' file on your Desktop & Email it to yourself
    * Download the attached '''json''' file on your Laptop
    * Restore Bookmarks from the '''json''' file -> [[Backing up and restoring bookmarks#w_restoring-from-backups|Restoring from Backups]]
    Check and tell if its working.

  • HT5598 My Apple IPad keeps crashing when ever I'm in any application. It crashes to the desk top with all my apps. How can this be fixed?

    My IPad crashes every time I use an application. It keeps crashing to the desk top where all the other apps are at. It doesn't matter what application I'm in either. How can this be fixed?

    Hey Hlrj09,
    I'd check out this article and follow the troubleshooting steps within:
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/ts1702
    Even though it is geared towards applications purchased from the App Store and you're experiencing the issue with all apps, most of the steps would still be applicable to your situation. I would also take a look at the troubleshooting assistant to see if that helps:
    Frozen or unresponsive iPad
    http://www.apple.com/support/ipad/assistant/ipad/
    Hope that helps,
    David

  • When you take photos, is there a purple flare? I've heard a lot of complaints about this.

    I want to buy the new iPhone 5, but I've heard that when you take a photo in the outside, it appears a purple flare in the image. Is it a really big issue? Do you reccomend me to buy it? Or should I wait to the next phone?
    Thanks!

    The effect exists, but is probably overblown.
    Apple acknowledges it here: http://support.apple.com/kb/TS4436
    It is simply poor photographic technique to shoot into the sun, unless you are seeking to achieve an artistic effect by doing so. The light source should ideally be behind the photographer, or at least off to the side.
    The iPhone is not the only phone susceptible to the problem:
    http://www.phonesreview.co.uk/2012/11/16/nexus-4-possibly-suffers-same-iphone-5- purple-flare-problems/

  • Make iSight camera take a snapshot of the user when keywords are typed

    I work in an APR and we have a lot of trouble with people trying to look at adult content on our customer machines. Obviously we have blocked these types of sites, but we cannot keep tabs on all the proxies. We have also deleted Photo Booth off of the machines otherwise the machines are 3 people deep on weekends and we cant demo stuff to customers. does anyone know of any free apps that will take a snapshot of the user when they type in a keyword such as "Adult Games" or "Meatspin", save that file and the word they typed on the HD somewhere? Or, some way of making Automator do that? Don't forget that we do not have photo booth on the machines. And it would be nice if the App/automator didn't make the iSight camera light come on, and also notified us when a keyword has been entered.
    Dan
    Apple Premium Reseller, UK
    Message was edited by: Nedanator

    Oops
    Step 4 should say save it an an application (not a script)
    See also Neoporcupine's comments about Terminal being open

  • Why dont you take ios 7 and take out a feature so the ipod 4 can have enough space to take it I suggest when you touch your screen and the keyboard appears and make the old way.

    Why dont you take ios 7 and take out a feature so the ipod 4 can have enough space to take it I suggest when you touch your screen and the keyboard appears and make the old way.

    We're all users like yourself, if you would like to leave feedback to Apple go to Contact Us at the bottom of this page then go to Feedback and leave your concern. iOS 7 requires 512MB of RAM. Only the iPod 5 has 512MB RAM. The iPod 4 only has 256MB RAM. Hope this helps, Good luck.

  • How can I capture the photo shutter sound when you take a screen shot

    I want to use the Mac's shutter sound that is used when you take a screen shot or take a Photo Booth photo. I tried Audio Hijack but it doen't capture the sound. I figure this audio file must be in the system folder somewhere.

    A camera shutter sound can be found in
    HD>LIBRARY>AUDIO>APPLE LOOPS>APPLE>iLIFE SOUND EFFECTS>FOLEY

  • HT4623 why does my ipad kick me out of FB and sometimes to the 'settings' page or sometimes to the desk top, for what reason?     I have 50.8 GB of capacity available; it is version 5.1.1 and model MC497LL.   it is WIFI and internet via AT&T???  Can you h

    Can anyone help me?  Why does my ipad kick me out of FB?  Sometimes to the 'settings' page and sometimes to the desk top?  I would like to know why this happens and what I can check or change to make it stop.   I have 50.8 GB of capacity available; it is version IOS 5.1.1; model MC497LL.  It is WIFI and internet via AT&T?   Can anyone give me some clues on what to do; or change in settings???  Thank you very much! 

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • If you take it out of the shop ..you are on your own buddy

    sorry if this is posted in the wrong place..?
    I am about to buy my first ever Apple Mac ( iMac ) when the current freezing / screen problems have been resolved
    as a total newbie to the world of Mac's , I would like to walk into the Apple Store, and buy the machine
    at the same time get the shop to set up the machine I am buying so it can be checked out .
    The reason I am concerned about checking the new iMac out in the store is that
    its a well known fact that '' customer services '' is not regarded highly here in Thailand
    and I see many instances where the customer has been totally let down by so called
    warranties and guarantees , from the smallest retailer to major Thai based International
    companies . There’s numerous forums here in Thailand that show the vast number of
    complaints , some related to Apple Suppliers, the norm here in Thailand seems to be if you take it
    out of the shop , you are on your own buddy. I am not saying all Thai Apple suppliers are
    Letting down their customers, but the complaints show many are.
    So my main concern is that knowing when I do buy my new iMac , once I leave the
    apple Store , and may be have a problem , the chances of the apple Store being willing to offer what’s only
    considered by others as a normal response of yes sir just bring it in so we can look and help put any
    problems right , may well be missing here in Thailand . One problem here is that when you are
    purchasing any thing from a computer to a car the Thai way of selling has only one route .. Just tell the customer
    what he wants to hear and forget about the actual facts, So when I ask the Apple sales person .. any problems I can
    bring it back ... ? Yes Sir you can , but the reality is more like .. ive got a problem with my new iMac.. can you
    help ..? Not sure sir I have to see my boss leave it here and I will call you, this is normally followed by a long
    Period of silence...
    I was in the Apple shop yesterday ( the sales assistant did not really seem know too much about the Products) as when I asked how much an Apple Modem was , his reply was we don't sell them as all Macs come with an internal modem ..?, but they did have the new iMac on display , 20 & 24 inch , and If I wanted he would get one from the stock room and set it up in the show room so I could see / inspect / try it out. so as you can see it will be very important to me to set up the new machine to inspect / try it out as much as possible , before taking it home..
    So here’s my newbie question... As I really want to try out the iMac in the store before I take it home what things would I need to look for / try out
    ( may be relating to the current iMac problems ) and any general Mac related things to try / check out ..? as a total Mac newbie a simple step by step
    idea would be most appreciated , along with any comments or advice you can offer this Newbie .
    Thanks

    redstain wrote:
    As I really want to try out the iMac in the store before I take it home what things would I need to look for / try out
    \- Check for freeze-ups -- I'll defer to others for advice on how.
    \- Check for pixel defects -- examine the screen carefully with both solid white and solid black backgrounds. An in-store, pre-purchase inspection is your ONLY protection against getting stuck with bad pixels.
    \- Check for acceptable color and brightness uniformity. Examine the overall appearance of the screen with solid white, gray, and aqua-blue backgrounds.
    \* Many (most? all?) 20" iMacs have top-to-bottom color and brightness gradients with "washed-out" colors near the bottom edge of the screen.
    \* Many (most? all?) 24" ALU iMacs have left-to right brightness gradients and/or a yellow tint in the center/right of the screen.
    Here are some photos that should help you recognize brightness/color gradients:
    http://picasaweb.google.com/TheLooby
    ...good luck,
    Looby

  • Can anyone help me.  when i open my pages I have to drag my files to the desk top to see them.  Thank u in advance for your help

    Hello,  When I open my pages.  I have to drag my files to the desk top to see them. Thank you in advance

    Can you try to explain yourself more clearly?
    I honestly haven't a clue what you are talking about.
    Peter

  • I was cleaning up the desk top on an old power mac G4 when I restarted an got a circle with slash and the small spinning wheel under it nothing else

    I received an old Power Mac G4 Quick Silver and was cleaning the desk top.  When I restarted all I got was a circle with a slash and the small spinning wheel under it...nothing else

    I suppose 3.6V PRAM battery is run out , so you'd better replace it.
    Or resetting PRAM could solve the problem.
    http://support.apple.com/kb/HT1379?viewlocale=en_US

Maybe you are looking for

  • How to run 1 or more main classes in a jar?

    Hi there, I have 2 or more main classes in a java project. How do I create more than one application entry point in my MANIFEST.INF? I create my jar file from my java project using Eclipse, and it asked me to "Select the class of the application entr

  • Photoshop Pen Tool:  Welding Points?

    I am working with Photoshop CS3 and I have 3 paths that were on different layers until I moved them all to 1 layer.  I can select all of the paths with the Path Selection Tool and "Combine" them into 1 path... but this doesn't do what I need it to. 

  • DSO request Deletion through Process Chain

    Hi All, Can anybody know how to delete the last request number of DSO. i need to delete the last request using ABAP program in process chain. I have 2 sources loaded to DSO.. Ex: Cube1 ...> DSO (1 st request)     Cube2...> DSO (2 st request) Please h

  • CPU used by this session

    Try to get CPU usage from within Oracle by monitoring "CPU used by this session" parameter in v$sysstat, but got some values over 100%. Is my calculation wrong or this is the problem of how Oracle collecting the data? Here's my calculation: CPU Usage

  • 9481 solenoid

    Hi i'm using a NI 9481 relay module to control two 12v solenoid valves. I simply want to be able to to have two buttons on the front pannel each with a text display showing "flowing" "no flow" respectiveley depending obviously on the position of the