Whenever I run Firfox 4.0, my computer fan runs continuously. I have disabled all plug-ins, and I get the same result. This did not happen with Firefox 3.x, and it doesn't happen with IE 8.0. Any ideas?

Whenever I run Firfox 4.0, my computer fan runs continuously. I have disabled all Firefox plug-ins, but I get the same result. This did not happen with Firefox 3.x, and it doesn't happen with IE 8.0. Any ideas?

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Similar Messages

  • I upgraded my new iPad (iPad 3) to IOS 6 and everything went well except Siri won't launch apps. When asked say "launch Facebook" Siri responds with "it doesn't look like you have an app named Facebook" and I get the same results when trying to launch any

    I upgraded my new iPad (iPad 3) to IOS 6 and everything went well except Siri won’t launch apps. When asked say “launch Facebook” Siri responds with “it doesn’t look like you have an app named Facebook” and I get the same results when trying to launch any app. Siri works for everything else it just won’t launch apps. Any ideas? Thanks.

    I have this same problem... Seems like nobody else does. Siri won't launch any apps for me, including native apps.

  • I can't run any of the apple programs. Running windows 7 32 bit.I tried everything for hours and nothing.I Installed, Uninstalled a 1000 times and always getting the same results;errors.I think you guys have a bug or something else. Help please. T.Y.

    Itunes 10.5.1, Safari, Quicktime, won't install... windows 7 32 bit... when I try to open any of the software it crash... I need it for my Ipad2 but nothing is working... I tried all the help from the communities but nothing... I disable firewall, windows deffender, fix registers and nothing... any help will be appreciated...
    I don't know if there is a bug in your sofware or is not ready for windows yet... Thank you...

    Can someone please respond to my request for support?  I tried the provided correct answer at https://discussions.apple.com/message/11561783#11561783  but it did not work. 
    I also got a MSFT tech support person to remotely look at my machine, for what its worth, he said the registry file is fine and to contact Apple support.
    Any help would be very much appreciated.

  • I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

    I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

    JungleTaxi Cabbie wrote:
    Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
    Enter your Incoming Mail Server, User Name, and Password using the following settings:
    Incoming Mail Server: mail.me.com
    User Name: Your iCloud email address (excluding @me.com)
    Password: Your password
    Last Modified: Jun 27, 2013
    Maybe you should test these things before calling people out, because these settings do function perfectly well.
    iCloud is not supported on Snow Leopard or lower, why bother to mention it?
    The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
    The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
    JungleTaxi Cabbie wrote:
    Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
    I never said that there was, perhaps you imagined it.

  • Trying to sync my iPod with iTunes and I am getting this message:"This computer is no longer authorized to play purchased items that are on the ipod"...  I have deauthorized and reauthorized the account and still getting the same error.

    Trying to sync my iPod with iTunes and I am getting this message:"This computer is no longer authorized to play purchased items that are on the ipod"...  I have deauthorized and reauthorized the account and still getting the same error.  I have read and followed the instructions in the support article TS1389.  I do NOT have an SC info folder at /Users/Shared/ directory to delete.
    I just installed Lion yesterday, and am running iTunes 10.4.   First attempt to sync since upgrade.
    Thanks
    Dan

    Yup,
    Me too...this is stupid, stupid, stupid. Just purchased my 200 (ish) mac and now I am told that my new Mac Book pro is not "authorized".
    Which if my 200 macs are authorized. Can someone please tell me???
    I "deauthorized" my old MBP and still told I cannot use my iPhone with iTunes.
    Interesting that my old $2500 MBP, my new $3000 MBP and my $500 iPhone all cannot work cuz of some pinhead's decision to use this assorization process.
    Yes I am very, very, very mad.

  • I am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad.  an unknown error occurs (1631).  what do I do??

    am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad.  an unknown error occurs (1631).  what do I do??

    The search bar can be very valuable...........
    In using it, I found out other's have had this issue and it likely means you have a 3G iPad?  If you do, go into settings and turn off cellular data, then try to update again and you should be OK........

  • I have been using aurora and updated to 12.0a2 and my computer continually freezes even after disabling all plug-ins and i have even dumped stuff from the memory on my hard drive.

    i continually get the same 12.0a2 update box that pops up in the bottom right corner even though i have the updated version and i have to wait for the aurora updater to do something everytime i start a new session. i went through and disabled all plug-ins and have no extensions active and this doesn't solve the problem. according to plug-in check all plug-ins are up to date. aurora does crash every once in a while where it closes out all my windows...but i do not get the crash report anymore to report it. is there a problem with aurora? i even updated FF in case that had a factor in the crashes/freezes!! FF used to do this same thing all the timea fter a new update but this is ridiculous!! WHAT IS THE PROBLEM? typos courtesy of freezing!!!is there a problem with aurora? i can't go more than 2 minutes without constant freezing and the "not responding" message. i have run scans on my computer weekly since i updated to aurora and there is no threats/problems...why does this keep happening?
    addendum...i have added the crash reports for the last week...does that give any insight into why this keeps happening?

    i am not sure what this means? "not for public use"? i did not seek out another version of FF it was an option on mozilla's page when i needed to update FF!! i know that i will run into these problems if i do not keep current and it was an option so i chose it. are you suggesting that i dump aurora from my system and go back to using just FF? i'm not a developer or know anything deep regarding the physical or logical of systems...i am just trying to keep good maintenance on my system!! i need a browser that works with me and not against me...chrome does not do what i need...neither does opera...FF is the only browser that i have used for almost 4 years now and i don't plan on going back to IE or changing to those mentioned above...i just want to know that when i see new offerings on mozilla products and i accept them into my system that they work much better than what i am experiencing currently!! i get that it is open-sourced and therefore a work in progress

  • I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen.  I've rebooted, I've reinstalled several times and get the same result.  Two days wasted!

    I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen.  I've rebooted, I've reinstalled several times and get the same result.  Two days wasted and I can't use my computer!!

    I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
    Hope this helps.

  • After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

    After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

    Have you run it in a debugger? That will show you exactly what is happening and why.

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • My iphone 6 connects to the car via bluetooth, the music works good, but the phone calles does not work.  It looks like it is working but doesn't.  I have tried in my Hyundai and a Dodge rent car and get the same results.  I updated the last 8.0.2.

    My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work.  It looks like it is working but doesn't.  I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results.  I updated the last 8.0.2.  It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
    Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call.  This is happening on both cars.
    Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
    My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
    Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.

    We had the same problem, but figure out the solution.
    You MUST have at least 1 song added to your ITUNE!  After you add a free song, then everything else should work as normal!
    Hope this helps!

  • When i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

    when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • When I try to eject my ipod after sync I get the following message:"The iPod cannot be restored because it contains files that are in use by another application.". I tried to restore but it doesn't work and I get the same message

    When I try to eject my ipod after sync I get the following message:The iPod cannot be restored because it contains files that are in use by another application.". I tried to restore but it doesn't work and I get the same message

    Go to your computer's System Tray and try ejecting.  If you can't eject, there is an application that is trying to access your iPod.
    Go to http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx and download ProcessExplorer.
    Go to http://support.microsoft.com/kb/555665 and follow the instructions under Resolution.
    Note that this is a good, general process any time you can't access any file.
    In my case an update to RealPlayer installed a program called RecordingManager that was accessing my iPod.

  • Once I connect my iPhone to the computer to sync., the computer crashes.  I unistalled and installed iTunes, still I get the same results.  If I disconnect the iPhone from the computer, iTune will work, I therefore uninstalled the iTune from my computer.

    Once I connect my iPhone to the compjuter to sync., the computer crashes, and continues to reboot as long as the charge cable is connect between the iPhone and the computer, once I disconnect it, then the computer and iTunes will function normally. 
    I had uninstalled and reinstalled the iTunes 3 different times, still I am getting the same results, I therefore had to uninstall the iTune from my computer to be able to do my work, and charge the iPhone at the same time.  Please note that few weeks ago, everything was working fine.
    What can I do to resolve this issue.
    Thank you.
    Magdi

    If you have photos in the Camera Roll on your iPhone and have preferences set to open an image azure application on your pc when a camera is connected, your pc will do just that. That's how one transfers photos taken with the phone to a PC.
    You can do two things to avoid this.
    1. Just quit the image capture application and open iTunes. You do have iTunes 10.7 or higher installed on your pc, right?
    2. You can change the preferences on your pc to do nothing when a camera is connected. And you can set the preference in iTunes to open iTunes when your iPhone is connected.

  • Firefox will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

    will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

    Can you attach a screenshot or link to the instructions you are following?
    You are on the 3.6 release and Firefox 7.0.1 is out. You can download and install the latest release from http://www.mozilla.org/en-US/firefox/new/ if you would like to update now. The 3.6 version will be maintained for a while longer, but you should update when you can.

Maybe you are looking for