Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
so i could modify and use the driver

Hello,
It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
Hope this helps.
Scott B.
Applications Engineer
National Instruments

Similar Messages

Does anybody already developed or knows where can I find a LabVIEW driver for a CETA 800 equipment?

Ronaldo Schwarz
Selco Sistemas Eletronicos Ltda

Ronaldo,
I just did a search of the web (and of NI resources), and I could not find any helpful pages offering information on LabVIEW drivers for this CETA 800 equipment.
The only suggestion I have is that perhaps the manufacturer of the device may have a driver, or may perhaps know of someone who does provide one.
I hope you are able to find a LabVIEW driver for this instrument. If you end up having to write one of your own, you can visit www.ni.com/idnet to find several resources on writing your own instrument drivers.
Have a pleasant day.
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Where can I find a LabView driver for HP 4142B?

I'm using LabView 5.0.1 software.

I have not seen a driver for the 4142, but you may want to look at the 4155. This is a similar instrument and there are VXI PnP drivers for it on the Agilent web site. (That is assuming you WANT VXI drivers).
They may at least give you a starting point.
Kevin

Where can I find example LabVIEW VIs for the NI-USRP?

There are several sources of example LabVIEW VIs for the NI USRP:
We have established a NI Community "NI USRP Example LabVIEW VIs" where you can find example VIs from us (NI) and the community.
The NI-USRP driver installs a variety of example VIs to the to the following folder on your PC:
<LabVIEW Installation path>\examples\instr\niUSRP
where you should replace <LabVIEW Installation path> with the root folder of your local LabVIEW installation. For instance, my Windows 7 32-bit PC here has LabVIEW 2011 installed and the examples can be found here: C:\Program Files\National Instruments\LabVIEW 2011\examples\instr\niUSRP
I've installed the NI-USRP driver, but I can't seem to find the new examples in the LabVIEW Example Finder. Where are the example LabVIEW VIs installed by the NI-USRP driver?
Although the NI-USRP driver does indeed install examples, the current NI-USRP 1.1 release does not update the LabVIEW Example Finder with entries for these examples. To find the examples, you can navigate the Windows Start Menu to the following location:
Start Menu\Programs\National Instruments\NI-USRP\Examples
This Start Menu entry includes several Shortcuts that point to folders that are the home to example VIs.
Sam Shearman

Hello,
It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
Hope this helps.
Scott B.
Applications Engineer
National Instruments

Where can I find a print driver for my e-mac running os9.2

Where can I find a print driver for my e-mac running os9.2

Actually the best place is the web site for the printer. You'll also need the model, but there are still some OS9 drivers out there.
You must supply the printer make and model for people here to help further.

Where can I find a downloadable benchmark for the MacBook Pro?

I have a 2013 MacBook Pro and a 2006 Mac Pro. I am thinking of dumping the Mac Pro and make my MacBook my one and only computer. I want to run a benchmark on each system to see what I am trading off with this plan. Where can I find a downloadable benchmark for a Mac running OS X?

Geekbench -> http://www.primatelabs.com/geekbench/.
Clinton
MacBook Pro (15-inch Late 2011), OS X Mavericks 10.9.5, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Where can I find a user-guide for the awfull Text-Editor used to enter/edit these forums entries?

I am desesperate to understand how quite basic functions (just as one of many examples: how can I paste text, that I have formatted in MS Word and want to paste into a Forum Post-Entry?) can be done with the primitive and awful Text Editor used to enter/edit Forum Entries. Notice, that like many other Adobe users, I am not familiar at all with HTML and it is therefore a description of the badly named "Full Editor" that I am looking for.
Where can I find a User-Guide for this Text Editor?
My recommendation to Adobe: exercise enough brute pressure on the developers of this primitive Text Editor to force them to provide something more reasonable, more powerful and more intuitive.

Thank You Jochem
I was trying to understand how I could do things as simple as inserting text that I had previously copied. Since there are neither command menüs nor buttons for the Insert of previously copied text, I was trying a mouse right click.....and was being offered in the context menu the choice between "Insert Link", "Insert Image", "Alignement", and "Insert Table"....... but no possibility of a plain insert of previously copied text.
Now, I realize, that Clearstream supports at least the keyword shortcut of "Ctrl V" ........that I am not using in any other software (I never use any keyboard shortcuts).
Since Clearstream does not support reasonable choices in the contextual menus, I will need to memorize the most important keyword shortcuts.
By the way: I detected now, that the "Ctrl V" keyboard shortcut allows me to insert formatted text.
Even, if I will now begin to be able to use reasonably Clearstream, I am quite surprised to see that such a software provides neither reasonable Contextual Menus, nor a User Guide, nor........
Thank you again Jochem for your patience with me.

Where can I find an Access key for the user with "AS ABAP sneak preview" ?

Hi all,
I have installed AS ABAP sneak preview on my laptop.
I use username "bcuser" and password "minisap". when I try to create some objects like, i.e. Function Group for Function Module, then it ask for an access key.
Where can I find an access key for this ABAP SNEAK PREVIEW for user "bcuser"?
I have gone thru some documents, I know we need to register user in OSS and need to get an access key from the marketplace but can I register this user "bcuser" or it's already register? I need some more specific information to resolve this issue.
Please advise me on above question.
Thanks,
Haresh Solanki

Hi Rich,
I have entered ZH_XYZ as a Function Group name to create a new function group. While I am creating it, it asks for the Access Key. I tries to enter an Access Key here for the first time and it says wrong entry for access key.
Also if I try to create new Function Module, it ask me to select the Function Group. As I couldn't create a new Function Group, I tried to select from existing(from SAP System's FG), still it asks for an access key, I enter the an Access Key here, then also it says wrong entry.
I really got confused with this Access Key thing, can you provide me some insights?
Thanks,
Haresh Solanki

Where can I find XP x64 drivers for Portege R500 - hotkey / power management?

Where can I find downloads that will enable power management or hotkey support for my Portege R500?
I have already installed drivers for everything except fingerprint reader (don't want), tpm (really don't want), and hdd motion sensor (tos620a) (not bothered about right now). Most drivers are latest from original vendor websites, or, failing those, from Toshiba's Vista 64-bit download areas.
Everything else generally works: wifi, graphics & chipset, sound, lan, bluetooth stack, cardbus, card reader, etc.
However, having done this, the following issues remain:
FN hotkeys don't work for suspend to ram, suspend to disk, *screen* *brightness* - essential to extending lifetime; FN hotkeys for numeric/direction pad, external monitor toggle *do* work
Dedicated backlight toggle button doesn't do anything
However, in order to get battery lifetime beyond ~2.5 hours and closer to the rated 7.1 hours, I'll need to turn some things down / off occasionally. What software can help and where can I get it, such that it works on Windows XP x64 edition?
Note:
I have tried the xp 32-bit packages that Toshiba supplies, they don't appear to work on x64. The 'ctrls' package requires 'cmod', but 'cmod' gives this error:
TOSHIBA Common Modules Setup
Not an ACPI machine. Cannot install TOSHIBA ACPI Logical Device.
OK
I have tried the xp 32-bit package called 'pwrsav'; it installs a bad help link to my start menu, and adds a couple of exes, tpsmain and tpsoddctl, to my auto-runs. These 32-bit executables quit immediately after execution.
I would have tried to install Toshiba's Vista 64-bit packages for hotkeys / common modules / power management, but the only one of the three I can find via toshiba.co.uk are common modules, and unfortunately that zip file only contains .inf, .cat and .sys files, no installer.
Motivation:
I'm using a fresh install both because the default Vista install is unusable (900MB memory used on a fresh boot desktop, drive split into multiple partitions, trial, adware and broken software installed left and right)
I'm using x64 because I'm a software engineer whose next product needs to work on x64, and this new laptop was a likely first candidate

You didn't link to the tool you found. If you meant this tool then, you should be aware it doesn't work on x64 on R500:
Display Tuner
Cannot detect monitor!
Your monitor does not support DDC control or your videocard is not supported by Display Tuner.
You cannot use Display Tuner in this configuration.
OK
It would be unlikely to work in any case, as display driver brightness isn't normally the same as the screen's brightness (hence power usage).
Maybe it's a communication issue, but I *have* found +original+ drivers for all essential components, just not for things like screen brightness - something that, to be honest, I more expect to be handled in firmware / bios, as that's been my experience on previous laptops, and is more reliable in any case, considering I could be running an oddball Linux or a completely different OS, or a CPU-intensive high-priority task.
The R500 series seem to be scrimping on the firmware and expecting OS utilities and dedicate yet another system tray icon to take over that job.
It does look like x64 is a no-go for mobile use on this machine, due to lack of firmware power management, which is a great pity as the point of such a light machine is mobility. I'll wipe it and install XP 32-bit and see how that goes.

Where can I find a printer driver for Canon Pixma iP6600D? I have Mac OS 10.9.2

I have a great printer Canon Pixma iP6600D, still works great. I want to either download a printer driver or I want to learn how to transfer the driver from my Mac desk top. If I knew where to find the driver I could just manually transfer it from my desktop to my laptop. Both are running maverick.
Can anyone help me?

The last driver that Canon released for the iP6600D was v10.51 for OS X 10.7. You could try downloading and installing this driver via this link.
Note that the driver may not be digitally signed so Gatekeeper will block its installation. To get past Gatekeeper, you can right-click on the installer and select Open from the pop-up menu that appears. You will then be given the option to install the driver.

Where can I find NeoMagic video driver for Thinkpad 600 ?

Hello,
Can anyone managed to find the video driver for Thinkpad 600 which is NeoMagic NM2160 ?
Thanks,
Charles

Actually the best place is the web site for the printer. You'll also need the model, but there are still some OS9 drivers out there.
You must supply the printer make and model for people here to help further.

I HAVE AN ORTEK 810 USB KEYBOARD. WHERE CAN I FIND A MAC DRIVER FOR IT? THANKS

I havean ortek mck810 sub. are there MAC drivers for the keyboard?? thanks

yes-I checked for you and yes, there's a driver. and yes, my experience has been that you can plug pretty much any usb keyboard into your Mac and it should work, at least the basic functions will work fine. Tried it out with a keyboard I found in the dumpster near my condo, and it worked, so there's that, anyways
there you go
John B

Where can i find mysql Jdbc driver for linux

Hi all,
Can any one give urls to download mysql jdbc driver for linux.
And also for ODBC DRIVER FOR MYSQL ON LINUX.
Thanks

http://mmmysql.sourceforge.net/
(This is a type 4 driver, so "for Linux" is irrelevant.)

Where can i find an operating manual for the new OS update?

In particular - i'm wondering how to create a widget (shortcut) to turn on/off wifi. the upgrade got rid on the one on my home screen.
<Moved from Android to DROID RAZR by Motorola for more exposure.>
Message was edited by: Verizon Moderator

Here are the Manuals your Looking For: The First one is the User Guide the Second is the Full Manual. When you click on the two Top links you will go Directly to the Manuals...b33
I threw in the Last Link for Ya.! It talks about Adobe Flash it's Kind interesting..
https://motorola-global-portal.custhelp.com/ci/fattach/get/452160/1340835508/redirect/1/filename/RAZR_Maxx_GSG_Vzw_ICS_68017140001A.pdf
https://motorola-global-portal.custhelp.com/ci/fattach/get/452159/1340835334/redirect/1/filename/RAZR_Maxx_UG_Vzw_ICS_68017139001A.pdf
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/86246/p/30,6720,8417
Here is another Link To Motorola with Very Good Information:
https://motorola-global-portal.custhelp.com/app/product_page/faqs/p/30,6720,8417

Where can i find a scanner driver for my HP 1522?

Hi,
i have a HP Laserjet 1522 printer which doesnt have the scanner drivers installed. I have looked on the HP website and there is no download link.
could someone please tell me how to get hold of the scanner drivers.
regards,
Jake

To get your issue more exposure I would suggest posting it in the commercial forums since the LaserJet M1522 is a commercial product. You can do this at Printers - LaserJet.
In the meantime, the support page for your printer may help: HP LaserJet M1522 Multifunction Printer series Support
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

Similar Messages

Maybe you are looking for