Where can I get 5 CD installation of download of Solaris 10?

Hello folks, my host have CD rom, not DVD. I am running into the problem of being able to install OS from it since I can't find anywhere this media. Sun-->Oracle does not have CD installation as downloadable option.

Hello Gene,
Sun ceased to provide Solaris on CD a few years ago.
There are a few choices (assuming this is the Fire V120 from your other thead):
1. Install a DVD drive. Most ATAPI slimline drive (e.g. from older notebooks) work. These slimline drives have no jumper for master/slave, the mode is determined by firmware.
Maybe the drive you get is setup as slave, but the V120 requires this drive setup as master. On the paddle-board there is a jumper to select master or slave operation. The current selling SATA based drives use a different, incompatible interface.
2. The above mentioned paddle-board uses a --standard 40 pin IDE connector, with open cover you can attach a standard ATAPI drive These are pretty inexpensive today. I paid about 30 Euro for a DVD writer (not slimline!).-- Unfortunately this isn't the standard 40 pin connector and cable. These are fne pitch.
3. Get an external SCSI DVD drive. Select SCSI-ID 6 for the drive (this is the standard setting in Sun systems). The controller is single-channel, the upto two internal disks use
ID 0 and 1. Use the OBP commands probe-scsi and devalias (cdrom referrs to internal CD drive) to determine the device-path for the drive.
If you have access to another Solaris system the following might work as well.
4. Setup a jumpstart server and netinstall Solaris.
Michael
Edited by: maalatft on Sep 25, 2010 6:00 AM
After reviewing a real V120 option 2 is no choice, because of the special cable.

Similar Messages

Where can i get a windows installation disc

i rebooted my hp pavillion g6-1159sa and the realised i had lost the windows installation disc, where can i get one for it from, (its on windows 7 64bit) help please

Hi:
It appears this model is sold in the UK.
You can contact HP at the phone number below and see if you can order a set of recovery disks directly from HP.
0844 369 0369 Mon-Fri 8.30-18.00
Sat 10.00-16.00
(except for Bank Holidays)
Calls cost 5p per minute.
If HP does not carry recovery disks for your model, you can order a set from their e-partner at the link below.
http://www.best2serve.com/page/rcd_hardware_related_products/?product_type_id=4&hardware_product_id=...

Where can I get a windows installer disc for the bootcamp installation process?

I use an imac 10.9.5 maverick, with a 3.06 GHz intel core 13 processor, and a 4 GB 1333 MHz DDR3 memory. I am using BootCamp 1.0, and I need a windows installer disc to complete the installation process. Where can I get one of these discs?

Try Amazon, E-bay ........
buy windows installer install disk

Could please tell me where can I get the OSM installer and OSM learning doc

Hi,
I want to install Oracle communication Order and service manager. And want to learn it.
Could you please tell me where can I get the installer and documents of learning OSM?
Regards,

Please download OSM and Design Studio software and documentation from edelivery.oracle.com and it will provide you the OSM's architecture, installation and even the basics about the application. Concept guide will provide you an overview of the OSM product.
If you have any questions on any topic we can help.
Regards,
Anand Gopinath
OSM Product Management

How and where can i get an os installer file to copy to a flash drive

I replaced a bad hard drive for a friend and need an os to copy to a flash drive cause her cd/dvd is not working

You purchase the OS, then clone it to the flash drive like here. If we knew what OS you were planning to use, then we could be more specific about what to do.
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

Where can i get an older version of Download Helper?

Since the Download Helper no longer works with the new Browser/Add-on Update & it doesn't appear that it will be fixed anytime soon, where could I get and install an older version of the Download Helper?

Did you check for interference with other extensions?
Try a new profile with only that extension installed.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Where can I get an offline installer

I setup computers without internet support and I get the offline installers so I can do this. The installers used to be offline but recently they are not. This gets irritating. Why the assumption that the internet is always available???

Hi,
Here is the link to the full installer:
https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/22.0/win32/en-US/Firefox%20Setup%2022.0.exe

I can't get the iTunes installer to download to my computer. Win 7 Pro.

I have tried for two days to download the iTunes installer on a new computer. I'm running Windows 7 Pro on a Dell Precision, i7 processor, 32 GB RAM. A window pops up when I click on the Download link, asking if I want to download the file. When I click it, it opens a new window thanking me for downloading iTunes, but the download never occurs. I've tried this on both Firefox (36.0.1) and IE (11.0.9600.1761).
Does anybody have a useful solution?
Michael

There is some anecdotal evidence that the scripts on the Apple site that are supposed to detect the version of Windows you are running may fail for some users - jumping straight to the "Thank you for downloading ..." page with the installer not having been downloaded. As an alternative, you can go directly to the relevant downloads - like the previous 12.1.0.77 release, there are three different installers available, with direct links to these as follows:
iTunes 12.1.1.4 (32-bit) - iTunesSetup.exe
iTunes 12.1.1.4 (64-bit) - itunes6464setup.exe
iTunes 12.1.1.4 (64-bit "for older video cards") - iTunes64Setup.exe
The third of these - which is actually the 32-bit application with a 64-bit installer - should be used if you get a warning about video card incompatibility when you install the standard 64-bit version. Based on evidence of the previous release, this may also be an appropriate alternative if you have playback issues or crashes with the standard 64-bit version, or problems syncing with MS Outlook. In the case of playback issues, you should check the following before trying the "for older video cards" version:
Varying the Play Audio Using settings under Edit > Preferences > Playback (you need to restart iTunes for changes to take effect). Setting this to "Direct Sound" rather than "Windows Audio Session" has been reported to address some playback issues (though some users have stated the reverse to be the case - this may vary with specific audio hardware/drivers)
Verify that you have the latest version (7.7.6) of QuickTime installed - some users have found that absence of QuickTime, or an out-of-date version can result in complete lack of audio output, particularly (though not exclusively) with Bluetooth audio devices.
See turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for more details if you're still having problems with installation.

Where can i get HP JetAdmin s/w for X86 Solaris 8

HP doesn't offer it anymore.
Do I have to have HP JetDirect to use JetAdmin s/w, or as long as the printer has an IP address, JetDirect can talk to it.
Please advise,
Thanks.

The FP-1600 uses an ethernet protocol that is proprietary to National Instruments. At this point in time, it is restricted to Windows (95/98/ME/NT/2000) machines only. The FP-1000 and FP-1001 serial modules use a non-proprietary protocol known as Optomux. This protocol is documented in the FP-1000/1001 Programmers Reference Manual at http://www.ni.com/manuals .
There are a set of FieldPoint Optomux VI libraries that are posted at: ftp://ftp.ni.com/support/fieldpoint/LVFPOpto .
They are platform independant and will allow you to control the FP-1000 or FP-1001 using LabVIEW on any platform. The two libraries contain VI's corresponding to the Standard and Extended commands in the FP-1000/1001 Programmers Reference Manual mentioned above.
Regards,
Aaron

Where can I get a list of top downloaded songs with the number of downloads?

Also interested in finding a list of the top 100 downloaded podcasts with data, such as subscribers or downloads.

Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
You should probably consult your attorney to see if either of these will be acceptable.

Where can I get OiD?

Hi,
I need to install OiD but do not know how to start...I have the CD package that comes with Oracle 8i (8.1.6) but I do not see OiD in there (the web site says that it ships with Oracle 8i). Where can I get either a CD or download it to test it.
I am working on Solaris 2.6. I already have Oracle 8i installed.
Thanks!!!
Maria Sanchez

Hi Maria:
OiD resides on the Oracle 8.1.6 Enterprise Edition CD which you already have. After you start the Universal Installer you will get to a screen with 3 choices. The bottom choice is MANAGEMENT INFRASTRUCTURE. Choose this selection and then on the next screen of choices you will see Oracle Internet Directory. This is where you begin your installtion of OID.
It would be a good idea to read through the OiD installation guide which is on the "Oracle 8i Generic Documentation" CD. It will tell you some important pre and post installation steps for OID such as setting your NLS_LANG environment paramter to AMERICAN_AMERICA.UTF8 prior to installation or your database for OID will not work. Also, it is strongly recomended that you install OID into its own ORACLE_HOME with its own database. Although it is possible to use an exisiting database, most databases were not created using the NLS_LANG = AMERICAN_AMERICA.UTF8 env parameter
Hope this helps,
Jay
null

Where can I get xMII from ?

Hi All,
I wanted to install xMII 12.0 or x MII 11.5 but I could not find the setup file for xMII anywhere.
I tried on SAP Market Place and I found link there but when I click on that link to download that, it says this links has been disabled.
Can someone please advise me that where can I get xMII setup file to download?
It will be appreciated.
Thanks,
Haresh Solanki

Hi Jeremy,
I navigated to the right place and click on xMII link but nothing happens. I can't navigate any further then this.
Secondly, I searched for xMII or xMII 12.0 then it gives an error like...
"All corrective software packages, for SAP NetWeaver 2004s and SAP Business Suite 2005 and beyond that are delivered after April 2nd, 2007 will ONLY be available via SAP Solution Manager's Maintenance Optimizer. Find more details here."
Could you please advise me on that?
Thanks,
Haresh Solanki

I need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work? i use OS X

i need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work?

With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
So just go thru the motions of creating a proper printer instance:
Make sure the Mac "sees" the printer on the network.
System Preferences / Print & Scan
Click on the + button on the left column
Select the appropriate type of printer, will use IP for the rest of this
Select HP Jetdirect - Socket, default for HP network printers
Type the IP address or look it up
Name the printer for easy identification on the print dialog
Let the Mac identify the printer model or manually choose the driver
Click Add.
Once the instance pops up in the list, can click on Options & Supplies for further config.

TS5376 I did as this article described. The download was going smoothly until I got this error message "Click OK or enter alternate path to folder in installation package containing the file itunes.msi" Where can I get "itunes.msi" ??

I did as this article described. The download was going smoothly until I got this error message "Click OK or enter alternate path to folder in installation package containing the file itunes.msi" Where can I get "itunes.msi" ??

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Where can I get XI installer?

Hi Guy,
Where can I get Exchange Infrastructure (SAP XI) installer?Actually,I got one but the sizing just around 65 MB and doesn't has any installer file...
Thanks,
Parinya.

Hey
please have a look at the following
/thread/72813 [original link is broken]
Thanx
Aamir

Where can I get 5 CD installation of download of Solaris 10?

Similar Messages

Maybe you are looking for