Where do I get ATI mobility Radeon 9600/9700 Driver for Satellite M30?

Hey ho, had to reinstall winxp now i cant get any drievrs for the graphic card, I tried ATI they got the ones i need, but say they dont support toshiba notebooks and i cant install or even download the driver i need.i looked everywhere . on this site in the drivers section i cant find any ati drivers or any graphic drivers at all...Anyone got a Link for me plz?
Ati mobility Radeon 9600/9700 Driver for Satellite M30
Hope this works somehow been looking all day long now :(

Hi,
its your lucky day my friend.
Check this sites and download the drivers you need:
http://www.laptopvideo2go.com/
http://www.omegadrivers.net/
The drivers are native Nvidia/ATI drivers but the *.inf files (the files where the hardware information and the settings for the cards are listed) were fitted for mobile systems. That means you can install them on your machine and by the way you will get the most actual drivers.
Greets

Similar Messages

  • Can not install latest ATI mobility Radeon x1600 display driver for my Satellite A100

    Hello,
    my Satellite A100-704 PSAA9E is equipped with the ATI Mobility Radeon X1600 display graphic card, for which ATI provides a new driver, named Catalyst 8.3. My issue is that when I run the verification software I get a message telling me that driver is not suitable to be installed on my system.
    Is that any information available about it? Can I still install the new Catalyst driver or it's better if I don't? Oh, the current driver I have running on my notebook is the one downloaded from the Toshiba site, 8.292 I believe.
    Any information is appreciated. Thank you very much.

    > Can I still install the new Catalyst driver or it's better if I don't?
    I dont recommend the installation of any 3rd party graphic drivers. The fact is that such drivers are not tested and not certified and nobody knows how such driver would affect the notebooks hardware in worst case it could lead to the GPU overheating and damage
    best regards

  • Bug related to ATI Mobility Radeon 9600 / Different graphic cards ?

    I have posted in different post regarding a color shift I experience in my pictures using Aperture.
    All my displays are hardware calibrated and I'm starting to suspect it's related to a bug related to spesific graphic cards?
    A picture illustrating my problem can be seen here:
    http://homepage.mac.com/mr.lee/Aperture/
    What graphic cards do the rest of you have that experience similar problems?
    I have read that Apple maybe will include an update on some grapic cards in their 10.4.4 update and hope this will solve my problem
    It's strange to see that the loupe function in the illustating picture shows the correct blue colors in one of the frames (the frame normally used to view the details in pictures not zoomed to 100% like I did in this example)
    1,33GHz 17" PowerBook G4, 23" Apple Cinema HD Display   Mac OS X (10.4.3)   2GB RAM

    I've got the same problem with my ATI Radeon 9600 XT. The histogram on a B&W image even shows non-identical RGB curves
    http://www.mungosmash.com/ViewPhotograph.php?GUID=246
    I'm almost positive it's a bug with the ATI drivers.

  • Where can I get the Windows 7 64 bit driver for the MBP (6,2)?

    I have to install Windows 7 for work. I have my hard drive partitioned for triple boot, with Ubuntu 64 bit on one partition, and Windows 7 64 bit enterprise installed on another. Both boot fine; Ubuntu found all its drivers automatically (well done, guys!), but Windows of course cannot. Boot camp assistant refuses to download the drivers because I've already partitioned the drive. (Pardon my frustration, but that is a completely brain-damaged software design decision. -1 to apple.)
    Is there any way to get the drivers?? Even just for the wireless card?? This is unbelievably frustrating. It's 2011 - stuff is supposed to 'just work,' and playing coy little hide-the-hardware-driver games does not 'just work'.

    Alas, no dice. I was able to skip the compatibility check and run the bootcamp installer, and the 3.1 and 3.2 updates. However, I still have no wireless. The device manage shows it as an unknown network card.
    linux lspci identifies the ethernet and wifi cards as:
    02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10)
    03:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)
    the ethernet card is recognized in windows, but the BCM43224 is not.
    under linux the BCM43224 works out of the box using the standard "wl" driver with Broadcom's recently open-sourced firmware.
    But I'm having a hard time finding any other Windows drivers for it: searching broadcom's site and windows support doesn't give me anything, and google just gives me loads of what look like pay-to-download scam sites and malware. Have I entered some weird parallel reality where wifi support is better in linux than in windows? :lol: that can't be, maybe I'm not configuring something correctly.

  • ATI Mobility Radeon X1300 video driver update

    I updated my video driver using the Lenovo update.  The updated driver, 8.533.3.1-081110a-075168 79d177ww.exe is causing me to have extremely slow response time that I didn't experience previously. I am running with XP Professional (SP2).  Is there a way to go to a back-level driver?  Even typing this note is painfully slow. I have the latest BIOS and Presentation Manager.

    you could also download the Omega ATI catalyst driver, which works just as great and have some more features. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Need new ATI Radeon 1400 display driver for Satellite A100-788 PSAA9E

    Hello ,
    I search for New drivers for my ATI radeon mobility 1400 because in toshiba.com the last date drivers is 13/09/07.
    Thx.

    Hi
    This seems to be a Toshiba European notebook series and therefore you should search on the Toshiba European driver page.
    The newest ATI driver on the European driver page is a version 8.31.100.3.2 fro Vista and v 8.292-038742C for Win XP
    Unfortunately newer driver is not available
    Greetings

  • ATI Mobility Radeon X1600 graphics card Windows 8 driver missing

    I just installed Windows 8 Enterprise Trial version on HP nx9420 laptop (2GHz dual core prosessor, 4gb memory, ATI Motility Radeon X1600 graphics card with 256mb own memory, 1680x1050 native display resolution) on second partition, side by side with existing
    Windows 7. 
    Installation succeeded perfect, except Windows 8 couldn't install, nor did find from Windows Update display driver for ATI Mobility Radeon X1600 graphics card. Only Microsoft generic display driver was installed and it offered maximum 1450x800 resolution,
    so not laptops native 1680x1050 screen resolution. 
    Windows 7 can install working ATI driver right from Windows Update for that graphics card (version 8.561.0.0 dated 1.12.2008). 
    Laptop manufacturer HP has latest, old driver for Vista (version 8.453.0.0 dated 22.1.2008), so I installed that, selecting compatibility mode Vista with setup-program in Windows 8. That installed, but seems to have some problems, telling of missing library,
    maybe with some ATI extra diplay manager software and C++ 2005 library, that it installed. 
    MY QUESTION: Is there some problems with Windows 8 and that ATI Mobility Radeon X1600 graphics card? Why isn't the Windows 7 -version of ATI mobility radeon X1600 display driver available in Windows Update for Windows 8 too? 

    Thank you all of your thanks. 
    I can confirm that this solution works with Windows 10 Technology/Insider preview too. And surely works with forthcoming Windows RTM too. 
    Windows 8.1 and Windows 10 TP work both like a charm with nearly 10 years old HP Compaq nx9420 laptop, with Intel Core 2 Duo and ATI Mobility Radeon X1600 display adapter. Nice co-operation of "old" hardware and very Modern Windows OS.
    So in brief:
    If you have laptop with ATI Mobility Radeon X1600 or other X1000-series display adapter and
    you want to install Windows 8, 8.1 or 10, do this:
    0) First just install Windows 8.x/10. It will install Microsoft Generic display driver, but that doesn't support full resolution of ATI Mobility Radeon X1000 -series - for example it may show maximum 1400x1050 -resolution, thus your laptop display and Radeon
    X1000 may support native 1650x1050, but you can't obtain that resolution with that Microsoft generic driver. So you need ATI-driver and you can get it this way: 
    1) With Internet Explorer (this doesn't work with other browsers) go to
    Microsoft Update -catalog:   http://catalog.update.microsoft.com/
    2) Search "ATI Mobility Radeon X1600"
      (or X1300, X1800 etc)
    3) Sort search results by date (last update -column), latest on top. You will see drivers for Windows 7
    - they will work with Windows 8.x and 10 too. There is certainly two of them; other is 32 bit only and other is 64 bit dirver.
    4) Select proper driver version of them, according your Windows 32 or 64 bit, so click Add
    5) At top-right click Show basket and then download those driver packages to your computer. They are cab-file
    -packages. 
    6) Obtain 7-zip -utility, install it and with it unpack that cab-driver package on folder with its package-name.
    7) On start of taskbar, right mouse button click Windows-Start and then select Hardware management. On
    Hardware management -window open Display adapter -section, then mouse right click Microsoft adapter and select Update driver. Then on next window, select search driver from computer. 
    8) Browse on folder, where you unpacked ATI driver (on stage 6 earlier) and select Next ... that updates
    driver, on the go and you don't need even to reboot Windows. 
    9) Now you have proper ATI Mobility Radeon -driver in use. It  surely sets automatically resolution
    according your laptop screen (so recommended native resolution of screen panel) or you can select that on diplay settings. 
    Extra: For that Windows 8.x/10 boot works fine too, do this too: 
    Seems that Windows 8.x (and Windows 10 too), with their hybrid-shutdown -functionality, require some support of the display adapter, that ATI Radeon Mobility x1000 -series don't have. 
    So the solution is to disable that Windows 8.x (or Windows 10) hybrid boot -functionality (that is quicker boot) and to use "normal boot". 
    You can fix that this way:
    - at end of Taskbar click battery/power icon and select Power settings
    - navigate to power and sleep settings
    - either at bottom of those settings, or in Win10 more power settings, select power buttons functionality/settings (so what power button, sleep button or closing laptop screen does)
    - at bottom of those settings is shutdown options (or with similar name). uncheck "use quick boot" -settings (for to uncheck that you may need to click first upper "changing disabled settings" (or similar name) at top or windows) 
    (I recommend to check Hibernate at the same time too, because that is usefull)
    - then Save settings and reboot Windows and you have got rid of that problem that Windows 8.x/10 don't show Lock screen, now it does.
    Boot takes just a little longer, so practically no problem. And if you need quicker boot with laptop, use Hibernate-state, so don't shut down your laptop, but instead put it into Hibernate-state (that is better than Sleep mode, because Hibernate-mode doesn't
    consume battery-power, like Sleep-mode does)

  • ATI Mobility Radeon Premium Graphics DirectX 11

    Please give a link for DirectX 11 download.

    Dear sir,
            Below mention system I Purchased from  Doha -QATAR
      I Need 
    ATI Mobility Radeon Premium Graphics DirectX11
                                               For 
                      Model No      :-  HP Pavilion dv3 4303se
                      Serial No.     :-  [edited by Moderator]
                      Product No.  :-  LE428EA#ABV
       Reply as soon as possible
    Thank you

  • ATI Mobility Radeon HD 6370 switchable graphics driver

    Is there any way to get a new driver for the ATI Mobility Radeon HD 6370 switchable graphics card? I have a HP Pavilion dv7-4276nr Entertainment Notebook PC and the latest driver I can download from HP are from 2010!! Lots of games are not running properly because of the lack of updated drivers and I cannot download them from de ATI page since they wont work. Please tell me if there is any other place from where I can download a more updated driver. Thanks in advance.

    @stormsfury 
    I understand that you are looking for help with disabling the more powerful GPU on your notebook.
    I did some searching and found a few posts on this matter, by a few of the HP forum experts. Check through these pages:
    how to disable switchable graphics
    Disabling switchable graphics or setting global default.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • ATI Mobility Radeon HD 3650 does not start

    I upgraded my W500 notebook to Windows 8 Pro. in the device manager the status of the ATI Mobility Radeon HD 3650 display adapter is "This device cannot start (Code 10)"
    I cannot display a second digital monitor when I am docked in the docking station.
    The driver provider is AMD, version 8.97.10.6. Where can I get a version of the driver that will work? or is there something else I need to do?
    thanks

    The W500 is on the list of ThinkPad models that are not fully supported in Windows 8. My personal experience is that Windows 8 runs rather well on a W500, despite the lack of switchable graphics. Also, forget about using the Display Port output to drive an external monitor. That just will not work without those unavailable drivers. However, the W500 runs Windows 8 rather well, and video is pretty quick without the ATI support. Both a standard hard drive and solid state drive exhibit rather good performance with Windows 8 on the W500.
    I'm not too upset about the lack of Windows 8 support for the W500; that new operating system isn't all that much better than Windows 7 anyway.

  • [Solved] ATI Mobility Radeon HD 2300 Problem - fglrx not loading

    I changed the currently unreliable GS 8600 nvidia card in my laptop to a compatible old ATI HD 2300 card from a similar model laptop but I can't get the Catalyst drivers to work with it. The open source driver xf86-video-ati works well with it for basic use, but is not so good for 3D. This card should work with an Amilo xi-2428 & has done for other people who have developed faulty nvidia cards.
    I have the legacy driver installed from AUR (Catalyst-total-hd234k) and have enabled Vi0L0's [xorg112] server properly in pacman.conf & downgraded to Xorg-server 1.12. I also tried downgrading to Xorg-server 1.11 & reinstalling the drivers from AUR. Plus I have enabled and tried Vi0L0's [catalyst-hd234k] repo in place of the AUR package each time too. Made no difference. I've blacklisted radeon too.
    When the laptop boots systemd-modules-load.service shows as failed.
    $ sudo systemctl --failed
    UNIT LOAD ACTIVE SUB DESCRIPTION
    systemd-modules-load.service loaded failed failed Load Kernel Modules
    LOAD = Reflects whether the unit definition was properly loaded.
    ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
    SUB = The low-level unit activation state, values depend on unit type.
    1 loaded units listed. Pass --all to see loaded but inactive units, too.
    To show all installed unit files use 'systemctl list-unit-files'.
    [fyn@Finnix ~]$ systemctl status systemd-modules-load
    systemd-modules-load.service - Load Kernel Modules
    Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
    Active: failed (Result: exit-code) since Wed, 2012-12-19 15:29:57 GMT; 7min ago
    Docs: man:systemd-modules-load.service(8)
    man:modules-load.d(5)
    Process: 121 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
    It is only the fglrx module which fails to load:-
    $ sudo journalctl -b _PID=121
    -- Logs begin at Fri, 2012-10-26 09:21:22 GMT, end at Wed, 2012-12-19 15:38:07 G
    Dec 19 15:29:56 Finnix systemd-modules-load[121]: Failed to insert 'fglrx': No such device
    Dec 19 15:29:56 Finnix systemd-modules-load[121]: Inserted module 'nfs'
    Dec 19 15:29:57 Finnix systemd-modules-load[121]: Inserted module 'vboxnetflt'
    I have no idea how to get fglrx to load & since it fails to load so early during boot I doubt the problem lies with my Xorg.conf. Likewise neither aticonfig or the ATI control center work.
    aticonfig: No supported adapters detected
    amdcccle just give this message
    "There was a problem initializing Catalyst Control Center Linux edition. It could be caused by the following.
    No AMD graphics driver is installed, or the AMD driver is not functioning properly.
    Please install the AMD driver appropriate for you AMD hardware, or configure using aticonfig."
    Graphic card info
    $ hwinfo --gfxcard
    27: PCI 100.0: 0300 VGA compatible controller (VGA)
    [Created at pci.319]
    Unique ID: VCu0.SZRyUClQNUF
    Parent ID: vSkL.rRA4AOLb3d5
    SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
    SysFS BusID: 0000:01:00.0
    Hardware Class: graphics card
    Model: "ATI M71 [Mobility Radeon X2100]"
    Vendor: pci 0x1002 "ATI Technologies Inc"
    Device: pci 0x7210 "M71 [Mobility Radeon X2100]"
    SubVendor: pci 0x1734 "Fujitsu Technology Solutions"
    SubDevice: pci 0x1107
    Revision: 0xce
    Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
    I/O Ports: 0x2000-0x2fff (rw)
    Memory Range: 0xcfef0000-0xcfefffff (rw,non-prefetchable)
    Memory Range: 0xcfe00000-0xcfe1ffff (ro,non-prefetchable,disabled)
    IRQ: 5 (no events)
    I/O Ports: 0x3c0-0x3df (rw)
    Module Alias: "pci:v00001002d00007210sv00001734sd00001107bc03sc00i00"
    Driver Info #0:
    Driver Status: radeon is not active
    Driver Activation Cmd: "modprobe radeon"
    Config Status: cfg=new, avail=yes, need=no, active=unknown
    Attached to: #8 (PCI bridge)
    Primary display adapter: #27
    my Xorg.conf derived mainly from a newly generated config using Xorg :0 -configure
    Section "ServerLayout"
    Identifier "Arch"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "EnablePageFlip" # [<bool>]
    #Option "AccelDFS" # [<bool>]
    #Option "IgnoreEDID" # [<bool>]
    #Option "ColorTiling" # [<bool>]
    #Option "ColorTiling2D" # [<bool>]
    #Option "RenderAccel" # [<bool>]
    #Option "SubPixelOrder" # [<str>]
    #Option "AccelMethod" # <str>
    #Option "DRI" # [<bool>]
    #Option "TVStandard" # <str>
    #Option "EXAVSync" # [<bool>]
    #Option "EXAPixmaps" # [<bool>]
    #Option "ZaphodHeads" # <str>
    #Option "EnablePageFlip" # [<bool>]
    #Option "SwapbuffersWait" # [<bool>]
    Identifier "Card0"
    Driver "fglrx" # Essential.
    # Driver "vesa"
    BusID "PCI:1:0:0" # Recommended if autodetect fails.
    Option "OpenGLOverlay" "0" ##
    Option "XAANoOffscreenPixmaps" "false" ##
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "ShadowFB" # [<bool>]
    #Option "DefaultRefresh" # [<bool>]
    #Option "ModeSetClearScreen" # [<bool>]
    Identifier "Card1"
    Driver "fglrx"
    # Driver "vesa"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24 # Should not change from '24'
    Modes "1280x800" "1280x800" ## 1st value=default resolution, 2nd=maximum.
    Virtual 1664 1200 ## (x+64, y) to workaround potential OGL rect. artifacts/
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666 # May help enable direct rendering.
    EndSection
    Xorg log
    [ 22.305]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 22.306] X Protocol Version 11, Revision 0
    [ 22.306] Build Operating System: Linux 3.4.8-1-ARCH x86_64
    [ 22.307] Current Operating System: Linux Finnix 3.6.10-1-ARCH #1 SMP PREEMPT Tue Dec 11 09:40:17 CET 2012 x86_64
    [ 22.307] Kernel command line: root=/dev/sda3 ro video=vesa:off vga=0x360 init=/usr/lib/systemd/systemd nomodeset
    [ 22.308] Build Date: 27 August 2012 08:04:39AM
    [ 22.308]
    [ 22.309] Current version of pixman: 0.28.2
    [ 22.309] Before reporting problems, check
    to make sure that you have the latest version.
    [ 22.310] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.312] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 19 13:14:33 2012
    [ 22.312] (==) Using config file: "/etc/X11/xorg.conf"
    [ 22.313] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 22.313] (==) ServerLayout "Arch"
    [ 22.313] (**) |-->Screen "Screen0" (0)
    [ 22.313] (**) | |-->Monitor "Monitor0"
    [ 22.313] (**) | |-->Device "Card0"
    [ 22.313] (**) |-->Screen "Screen1" (1)
    [ 22.313] (**) | |-->Monitor "Monitor1"
    [ 22.313] (**) | |-->Device "Card1"
    [ 22.313] (**) |-->Input Device "Mouse0"
    [ 22.313] (**) |-->Input Device "Keyboard0"
    [ 22.313] (==) Automatically adding devices
    [ 22.313] (==) Automatically enabling devices
    [ 22.313] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 22.313] Entry deleted from font path.
    [ 22.313] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 22.313] Entry deleted from font path.
    [ 22.313] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 22.313] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 22.313] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 22.313] (WW) Disabling Mouse0
    [ 22.314] (WW) Disabling Keyboard0
    [ 22.314] (II) Loader magic: 0x7c8b00
    [ 22.314] (II) Module ABI versions:
    [ 22.314] X.Org ANSI C Emulation: 0.4
    [ 22.314] X.Org Video Driver: 12.1
    [ 22.314] X.Org XInput driver : 16.0
    [ 22.314] X.Org Server Extension : 6.0
    [ 22.315] (--) PCI:*(0:1:0:0) 1002:7210:1734:1107 rev 206, Mem @ 0xd0000000/268435456, 0xcfef0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
    [ 22.315] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 22.315] (II) "extmod" will be loaded by default.
    [ 22.315] (II) "dbe" will be loaded by default.
    [ 22.315] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.315] (II) "record" will be loaded by default.
    [ 22.315] (II) "dri" will be loaded by default.
    [ 22.315] (II) "dri2" will be loaded by default.
    [ 22.315] (II) LoadModule: "glx"
    [ 22.315] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 22.315] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 22.315] compiled for 6.9.0, module version = 1.0.0
    [ 22.315] (II) Loading extension GLX
    [ 22.315] (II) LoadModule: "extmod"
    [ 22.315] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 22.315] (II) Module extmod: vendor="X.Org Foundation"
    [ 22.315] compiled for 1.12.4, module version = 1.0.0
    [ 22.315] Module class: X.Org Server Extension
    [ 22.315] ABI class: X.Org Server Extension, version 6.0
    [ 22.315] (II) Loading extension MIT-SCREEN-SAVER
    [ 22.316] (II) Loading extension XFree86-VidModeExtension
    [ 22.316] (II) Loading extension XFree86-DGA
    [ 22.316] (II) Loading extension DPMS
    [ 22.316] (II) Loading extension XVideo
    [ 22.316] (II) Loading extension XVideo-MotionCompensation
    [ 22.316] (II) Loading extension X-Resource
    [ 22.316] (II) LoadModule: "dbe"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 22.316] (II) Module dbe: vendor="X.Org Foundation"
    [ 22.316] compiled for 1.12.4, module version = 1.0.0
    [ 22.316] Module class: X.Org Server Extension
    [ 22.316] ABI class: X.Org Server Extension, version 6.0
    [ 22.316] (II) Loading extension DOUBLE-BUFFER
    [ 22.316] (II) LoadModule: "record"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 22.316] (II) Module record: vendor="X.Org Foundation"
    [ 22.316] compiled for 1.12.4, module version = 1.13.0
    [ 22.316] Module class: X.Org Server Extension
    [ 22.316] ABI class: X.Org Server Extension, version 6.0
    [ 22.316] (II) Loading extension RECORD
    [ 22.316] (II) LoadModule: "dri"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 22.316] (II) Module dri: vendor="X.Org Foundation"
    [ 22.316] compiled for 1.12.4, module version = 1.0.0
    [ 22.316] ABI class: X.Org Server Extension, version 6.0
    [ 22.316] (II) Loading extension XFree86-DRI
    [ 22.316] (II) LoadModule: "dri2"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 22.317] (II) Module dri2: vendor="X.Org Foundation"
    [ 22.317] compiled for 1.12.4, module version = 1.2.0
    [ 22.317] ABI class: X.Org Server Extension, version 6.0
    [ 22.317] (II) Loading extension DRI2
    [ 22.317] (II) LoadModule: "fglrx"
    [ 22.317] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 22.333] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    [ 22.333] compiled for 1.4.99.906, module version = 8.97.2
    [ 22.333] Module class: X.Org Video Driver
    [ 22.333] (II) Loading sub module "fglrxdrm"
    [ 22.333] (II) LoadModule: "fglrxdrm"
    [ 22.333] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 22.333] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [ 22.333] compiled for 1.4.99.906, module version = 8.97.2
    [ 22.333] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
    [ 22.333] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
    [ 22.333] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
    [ 22.333] (++) using VT number 1
    [ 22.334] (WW) Falling back to old probe method for fglrx
    [ 22.337] (II) Loading PCS database from /etc/ati/amdpcsdb
    [ 22.337] (EE) No supported AMD display adapters were found
    [ 22.337] (EE) No devices detected.
    [ 22.337]
    Fatal server error:
    [ 22.337] no screens found
    [ 22.337]
    Please consult the The X.Org Foundation support
    at
    for help.
    [ 22.337] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 22.337]
    Solved. The  ATI Mobility Radeon HD 2300 was based on an earlier design & was not really one of the HD 2*** cards, even tho it was released as one (HD 2*** cards are R600 series while the HD 2300 is based on the R500 generation). So the offical drivers for it were relegated to legacy in 2009 with AMD's Catalyst 9.3 release & are no longer supported. Pretty crappy considering the HD 2300 was only on the market from 2007.
    To use the official catalyst drivers would require xorg 1.5.3 and kernel 2.6.29..... with no support for newer distros.
    Using open source drivers, cannot remember all the packages but have listed some below in case it helps anyone:-
    xf86-video-ati
    ati-dri
    lib32-ati-dri
    libtxc_dxtn
    lib32-libtxc_dxtn
    mesa
    lib32-mesa
    No xorg.conf needed for it using kms, but can make a config file to tweak if you like in the xorg.conf.d directory called 20-radeon.conf
    Last edited by Nixie (2012-12-24 17:21:29)

    Thanks for the response. It is not an obvious hardware issue. I would contact HP phone support to get the hardware addressed. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
    Please let me know if you have any other questions or concerns. Thanks!
    Mario
    I worked on behalf of HP.

  • ATI Mobility Radeon 5430-stuttering gameplay

    Hello there!
    My problem is the following: I'm the owner of an MSI x620 notebook, specifications are the following:
    CPU:    Intel® Core™2 Duo Processor
    OS:            Windows 7 64 bit
    Chipset:    Intel® GS45 + ICH9M-SFF
    Memory:    DDR3 800/1066, 4GB
    Graphics:    ATI® Mobility Radeon HD 5430, 1GB
    I often play games like WoW, Skyrim, and several others, and even though these games run really fine on my machine, the games freeze for 1-5 seconds, and then continue to go smoothly again. What could cause the problem? Even old games, like Warcraft 3 produce the same periodical freezing.
    I don't think that it is because of a software on my system, since I recently reinstalled my OS, and the problem stayed the same. What I'm thinking is that my video driver might be out of date (on the MSI driver site I could only find one for my video card, and that was released back in 2010.) I tried downloading one from ATI's official site, but there wasn't any specifically for my system, and claimed that these graphics drivers are supplied by the notebook manufacturer, customized for my machine and the features and functions are specific to my notebook, so I should download and up to date driver from MSI instead.
    Is there any way that I could update my driver? Or do you think that maybe something else causes my problem? I appreciate and help!
    Thank you in advance,
    Eva

    Thank you for your answer, and I'm sorry if I've offended anyone.
    I've already tried that link before, and after the program runs, it claims that my machine doesn't have the compatible driver or hardware. I also tried basically each and every ati catalyst driver updates from the official site (13.1 too) but even though they all get installed, nothing happens. I mean, when I install the driver provided by MSI, during the installation, the screen flickers, and changes between my integrated graphics card, and this Mobility Radeon HD 5430, and after the installation a message pops up that I should restart my notebook in order for the changes to take effect. The other drivers do not do this, so I assume that there is a minor problem during installation, that might be caused by my changeable graphics.

  • ATI Mobility Radeon HD 4350 with 512 MB primiere pro

    Will i3 process with 4GB RAM, 320GB (7200RPM) HDD and ATI Mobility Radeon HD 4350 with 512 MB be compatible with premiere pro????
    Please assist..!

    So Mr Millaard I will have to buy a laptop with 2 hard drives???
    I am stuck if so is the case,
    I have two options
    getting a HP laptop with
    Intel Core i3-370M Processor (2.4 GHz, 3 MB L3 cache)
    512 MB dedicated video RAM (ATI) one
    RAM 3 GB DDR3
    500 GB 7200 rpm SATA II Hard Drive
    or
    DELL XPS with i7 processor
    2GB graphics card
    4GB card
    500 GB hard
    I just want to use that software for subtitling
    please assist

  • Flash Player Crashes completely on ATI Mobility Radeon

    hello,
    I am the administrator of a couple of websites, that share the same AJAX/Flash AS3 basic structures. Normally, everything works fine, but on a few notebooks, every browser crashes at that moment, the flash components start to work.
    the notebook:
    DELL studio XPS 16
    ATI Mobility Radeon HD 3670
    Windows Vista
    http://www.dell.com/us/en/home/notebooks/laptop-studio-xps-16/pd.aspx?refid=laptop-studio- xps-16&cs=19&s=dhs
    an example page:
    http://www.thadasuanduanchai.com
    i have no idea, why that happens, but i suggest, that a problem with flash-graphics card or flash-built-in camera may be responsable for the problem.
    Has anybody an idea?
    thank you very much,
    C.Brosdau
    Germany

    If you read in graphics hardware support in some previous releases of Flash Player, flash video decoding support a.k.a. h.264 hardware video decoding is supported fully by ATi(or AMD) Radeon HD 4xxx and higher. The Radeon HD 3xxx and lower can't support h.264 video decoding for flash video decoding fully enough.

  • Gx623 ati mobility radeon 4670

    I have problem with ati mobility radeon 4670, as i can understand full core speed is reached just in 3d mode (675MHz), normal mode 300 MHz.
    I made a test with game "Blur" and it seems like something wrong with 3d control, because  i got lag. maybe drivers ? or smth ? 
    Driver version: 8.741.0.0
     i guess in 3d mode it should stay stable at 675MHz

    The temperatures are a bit high if it is a new laptop. If it's not, there may be some dust inside building the heat up. You should try installing system control manager and using the turbo mode. It improves the performance quite a lot. Also, i would suggest to update the game to the latest version, it may improve the performance too. This issue was really significant with GTA4. With the original version, it lagged with low settings, and with the latest patch i can play on medium settings with no lag at all.

Maybe you are looking for

  • Want to set-up iPhone for friend

    Hi - Am a happy user of (factory unlocked - NO JB or Unlock otherwise) iPhone-4 and Mac13"; want to set-up a newly-bought iPh-4 for a family member, using a PC; this 2nd phone comes with a specifc provider SIM-lock: the phone -company provides an exc

  • Multi value parameter is not working

    Hello There, I have been facing below issue and tried to find work around but no luck. Before I explain what issue is let me mention my report. I have a simple report developed in SQL 2K12 SP1 with one multiple value parameter and a text box. I have

  • Orgchart export to image: special characters issue

    Hello, Using Orgchart Accelerated 2.01. We have an issue when exporting to image.  The issue happens when org unit name or attributes contains some special characters like é or ë (common in French).  In the jpg export, these characters are being repl

  • New posted data in underlying table is not fetched in datasource (RSA3).

    Hi Gurus, I am using DataSource 0CA_TS_IS_1 in RSA3. To meet the requiremnt we posted some new data in the underlying database transparent table (CATSDB).  But datasource is not extracting new data whatever is posted in underlying database transparen

  • I have a report with 2 queries and prompts on same object tell me how many times it request for I/P?

    Hi i have a report with 2 queries and prompts on same object tell me how many times it request for I/P? can any one please guide me. Regards, Mahendra