Where do my source file clips go after optimization in Imovie 11.

Does anybody know where i can retrieve my source files. I imported them into imovie 11 but unchecked the copy files option after optimization, so they were moved, but moved where? they are not in my original folder. Thanks

Thanks for your reply Appleman, I see that there are a few clips there but not all of the original clips are there, any ideas where they might be? Also If the files are copied after optimization do those files also go in the iMovies Original Movies folder too.
Thanks

Similar Messages

  • Error updating AE: ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 212)

    Error updating AE: ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 212)
    What can I do?

    Run the cleaner tool and install from scratch.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Mylenium

  • Source file not accessible after Move project

    After moving a project, one of the source code files cannot be opened. The message:
    Resource '/Culinaria/src/SearchMenu.mxml' does not exist.
    But it does exist - it's residing in the src directory as it always has and is visible in the package explorer. Double clicking to open it provokes the error. The other files in the project can be opened normally.
    As said, this problem has surfaced after a Move of the project.
    The problem goes away and then comes back after shutting down Flash Developer and starting it up again.
    Also, I cannot view one of the source modules in Design mode - I just get an empty gray screen. Again not the case for every file but just one and it persists after shutting down and restarting Flash Developer. It happens to be the main application file  and it shows up on the tab as a simple text file when opened in source mode. Here is the first line:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                    xmlns:ns1="*"
                    width="1500" height="1134.0151"
                    backgroundImage="../image/SilvesterTischDeko.jpg" backgroundAlpha="0.85"  creationComplete="initCollections();"
                    layout="absolute">

    Hi Amy,
    yes I did Clean the project and a new .swf file is generated (dtLastMod at time of Clean). I can open the module (it's the main application) in source mode but the IDE does not offer the Source/Design buttons and the file icon on the tab is that of a simple text file.
    Somehow the Flash Dev. doesn't realize that it is mxml file representing the application even though the header line (see above) is unmistakable.

  • Where do the photo files end up after import?

    Hi Everyone.
    After being on a mac for about 6 years and having iPhoto for a couple of years I actually decided to give it a try. Ya ya, I know. Took me long enough.
    Anyways. I've gotten all of my photos into iPhoto and have them organized, but I noticed that it imports and resaves them. So I burned all of my photos to a backup disc and then deleted them off my computer.
    Where would I find the actual individual files for each photo that iPhoto copied over? I noticed that I can copy them to the desktop or use them in other programs but as of now I haven't been able to find, on the computer, where the actual files are stored for each picture.
    can anyone help me locate these?
    thanks
    Adam

    --First thing to know and remember is this...Do not drag any images, folder of images into the iPhoto Library in the Finder. Images have to be imported into iPhoto within the application. Do not scan images and save them into the iPhoto Library folder in the Finder. Save them to another location such as the Pictures folder or even the desktop. You can then import them into iPhoto.
    --All images that you import are sown in the library view. You can choose how you want to view, by rolls, by date, by rating, etc. When you put images in an Album, slideshow, book, etc, you are actually just putting pointers to those images in the library. You are not adding more images. If you delete an image from the Album it will still be in the library. If you delete an image from the library it is deleted from iPhoto's database and your hard drive (unless you have it backed up somewhere else)
    --You have a folder of images on your hard drive and want to import them into iPhoto. Drag the folder of images into an open iPhoto Library window and the folder of photos will be copied into the library, resulting in a new roll with the name of the folder. You now have two copies of those photos, the ones in iPhoto's database and the ones on your desktop. You can keep the ones on your desktop that you just imported as backup or you can delete that folder.
    -- you scan a picture/pictures and save it in a folder. You cannot scan directly into iPhoto or the iPhoto Library folder in the Finder.
    You want all your photos in iPhoto so you import them into iPhoto.
    Now you have two copies of that picture/pictures, so you can delete the originals that were in the scanned folder and keep the one/ones that were imported into iPhoto.
    -- You download pictures from your camera into iPhoto.
    There is now one copy of each of the pictures.
    You want to change something about a picture you imported, such as
    cropping it or changing the size, or changing the orientation.
    Once you do that to a picture, you now have two copies of the picture
    in iPhoto, the original and the edited one. The edited one will be in the library organize view. The original is packed away in an Original folder in your iPhoto Library folder under the date of the roll. You can always revert to the original by control clicking on the photo and choose "revert to orginal" You will not have this choice if you used iPhoto Diet to get rid of the Originals.
    (a quick note on cropping within iPhoto...when you are in edit mode, you automatically will be in the crop mode with cross hairs to highlight the crop area. To finish cropping you must click the crop button and then go back to library view and your cropped picture will be there.
    3.You want to use Photoshop or another graphic program to edit a picture in your iPhoto library.
    You can open up prefs for iPhoto and choose "when double clicking on
    photo ..do" choose "other" and select Photoshop. Now you can edit all
    pictures in your iPhoto library in PhotoShop by double clicking. If you save the photo with the same name and as a flattened file it will be saved right into iPhoto and you will see the changes. If you don't want to save it into iPhoto then do a "save as" and save to the desktop. You will then have the original photo still in iPhoto and your new edited photo on the desktop.
    Or, with iPhoto open, you can drag a picture from the library window
    to your desktop (you see a + sign on the pic you are dragging). You now
    have two of the same picture, one in the iPhoto library and one on your desktop. You can open up the one on your desktop in any graphic program and work on it. The one in iPhoto stays the same. You can also share/export the picture/pictures to your desktop or folder to work on them or do batch processing, etc. You will still have the originals in your iPhoto Library.
    Or, you can open up the ~/Pictures/iPhoto Library/folders and option drag any
    picture out of the folder to your desktop.

  • Where is localize source file executed when sqlplus start?

    Hi,
    I need to add some parameters to my sqlplus when it start, but I don't remember where is located file executed during start sql console.
    I try find in internet, but without result..
    Furthermore, is there any file which are execute when sqlplus is closed?
    Best.

    tutus wrote:
    Yes, of course you have right - there aren't any reason. But I wonder if file won't be empty after incorrectly end spool command..
    Despite, thank you for help.What's keeping you from testing it for yourself? You could have done that in 1/4 the time you have spent on this thread. What you really need to consider is the effect of SPOOL commands that are issued by the user or scripts the user runs in the session.

  • Where can the log file be found after printing to the PDF printer?

    Cannot locate the log file after printing to the Adobe PDF printer.  The box was unchecked for delete log file after successful print.  Running Adobe Acrobat X Standard (v10.0.0) on a windows 2008 R2 server.

    There is usually no log file when the conversion succeeds. Only in certain cases are their warning or information messages, usually of little interest.

  • When we download one add-on i want to know where's the source file/file location

    bcoz my computer is defeated to C

    I think your question got cut off.
    You want to know where the add-on is installed on your computer?
    For plugins (e.g., Flash player), the exact location of the plugin is easily available. Type or paste '''about:plugins''' in the address bar and press Enter.
    Extensions are more challenging to locate. Some will be in your currently active Firefox profile folder, but some will be in the Firefox program folder and others may be in locations specified in the Windows Registry.
    Is this on the right track?

  • I am having an issue with video file size increasing after editing in iMovie 11

    So I start off my iMovie 11 video project with a .mp4 video file of roughly 900MB.  After chopping off the beginning and ending (which is all I want to do) I have attempted finalizing and exporting using numerous options.  The problem is, each time I do this my file turns into a 3.9GB .mov file!  I don't want a huge file, I don't want a changed format file.  I simply want to cut off the beginning and ending of my movie and leave everything else the same.  Theoretically, this should make the file SMALLER since I am removing footage.  Correct?
    As  you can probably tell, I am new to all this.  But can anyone tell me how to keep my .mp4 file extension and simply delete the start and end?
    Thanks!

    The simple answer is, Don't Use iMovie.
    If you want to just trim off pieces you can do that in QuickTime X, which is already installed on your Mac. Open the movie in the QuickTime X player. Now go to the Edit Menu and choose Trim... At the bottom of the window you will see a series of thumbnail images with a yellow highlighted box around it. To cut off the beginng pull in the handle along the left hand side of the yellow box. Same is true for the end grab the yellow handle on the right side and pull it in as well. Then click the Trim button, now you've got just the piece of the video you want to save. Now go to File > Save As... set the Format to be Movie (to keep it in the same file format as it started as.
    This avoids all the transcoding/conversion that goes on when you import a video into iMovie.

  • (261936172) Q general Where are the Web Service source files?

    Q <general> Where are the source files for a Web Service created
    with WebLogic Workshop stored? How do I deploy the Web Service
    on a different WebLogic Server? Is there a way to bundle the
    Web Service project files manually to distribute them?
    Is there a way to configure the directory where Workshop stores
    the files?
    ANSWER: (by Adam Fitzgerald, [email protected]) The .jws files are stored
    in the project folder. This can be located on a local system, although by default
    they are in c:\bea\wlserver700b\sample\workshop\applications. The Web Service
    structure is understood by WLS 7.0 so by archiving the appropriate folder you
    can transfer the Web Service in its entirety from one deployment to another.

    Hi Dean,
    In SharePoint 2013 Designer, the help files are online. They provide tons of general information regarding SharePoint Designer 2013.  You can also find help files at:
    http://technet.microsoft.com/en-us/library/jj219638%28office.15%29.aspx .
    And find a great set of information on SPD 2013 and the new Workflow architecture here:
    http://msdn.microsoft.com/library/office/jj163986(v=office.15)
    More information, please refer to the link:
    http://blogs.msdn.com/b/sharepointdesigner/archive/2012/08/07/welcome-to-sharepoint-designer-2013-customer-preview.aspx
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • AME deleted my source files...

    After fixing some problems with a compilation of videos I have I sent the corrected files to Encoder to export them.
    After an obnoxious goat sound encouder force quit itself and my original source files are gone, not in the trash not even in .PRV folder and when I open the project up it says my media is offline and can not be located.
    The files quite literally evaporated. Unfortuanley these WERE my back up files an now all of my work is gone.
    I need to figure out why AME shut itself down and what the hell happened to my files.
    running CC

    Were you using Watch folders at all? If not, can you please give us the exact steps you took to queue the files (ie. were you queuing them directly from PPro, dragging and dropping them to AME, importing your sequences directly in AME)
    I have yet to run in to a case where AME removes source files from the system. Let's see if we can't get to the bottom of where things went sideways.

  • Error cannot open source file

    i cant run the programme as my c++ is having the error where all the source files cannot be opened. How can i fixed it?

    Hi cindy93,
    Thanks for posting in MSDN forum.
    To understand what happens on your side, Could you show us the complete error message? Does the source file create by yourself or some header files? Please more information.
    Have you tried to include the Absolute path to your source file? Something like that.
    #include "D:\..\..\source file name"
    Best regards,
    Shu Hu
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can multiple users work on one source file?

    Hi There,
    I'm currently working on a project that I would like to hand-off to another person to finish. I've tried sending the source file located in at: Home>Movie>iMovie Projects but apparently that doesn't work as the second user is unable to work on the project.
    Is this achievable? If so, how?
    Thank you in advance for any help! It's greatly appreciated =)

    For iMovie 09, you:
    You have to plug in an external drive, and within iMovie, drag the project file to the external drive. It will ask you if you want to "copy project" or "copy project and events".
    If you want to move the project and not just make a copy, then hold down the Command key while you drag the project file to the external drive.
    iMovie 08 does not have the capability of having project files on the external drive, but you can try to manually copy it to the external drive with the finder, and then move the associated events +from within iMovie+ (critical for the other machine to find the files) and when copying the project file to the other computer, it would be critical to find the iMovie project folder in the Movies folder and put it in exactly the same place on the other machine. Otherwise iMovie won't find it.
    The way you want to use it, iLife09 might be worth the upgrade, especially if my suggestions don't work.

  • What do you do with source file after edit and export

    Hi
    i wounder what people do with the source file after edit, they are taking up a lot of space on my computer. I can hardly bring myself to delete them, but neither can i save them, beacuse of space on Hdd. have thought of, only export those clip you have used in your timeline, uncompressed?

    Hi,
    i wounder what people do with the source file after edit, they are taking up a lot of space on my computer. I can hardly bring myself to delete them, but neither can i save them, beacuse of space on Hdd.
    If you don't need them at all, you can delete them. People usually store them in external drives if they need them.
    have thought of, only export those clip you have used in your timeline, uncompressed?
    Didn't really get this part. Do you mind explaining this?
    Thanks,
    Rameez

  • Where do the MEDIA FILES live after I import them from camera to iMovie (Mac Mini OS X 10.9.2)?  I need to MOVE MEDIA FILES to external hard drive.

    Where do the MEDIA FILES live after I import them from camera to iMovie (Mac Mini OS X 10.9.2)?  I need to MOVE MEDIA FILES to external hard drive.

    Hello bbryson68,
    Thanks for using Apple Support Communities.
    From your post I understand you're wanting to move iMovie project and event data to another drive.  I found the following information in the iMovie help that answers your question.
    Copy or move projects, events, or clips between libraries or storage devices
    Connect a storage device that contains the target library to your Mac, or copy the target library to your Mac.
    Choose File > Open Library, and choose an option from the submenu.You can choose from recently opened libraries, locate an existing library on your Mac, or create a new library.The selected library is opened in the Libraries list, with the first event selected and its contents displayed in the browser.
    In the Libraries list, select the event that contains the item you want to move or copy.
    In the browser, select the item you want to move or copy.Tip:  To select multiple clips or projects in the same library, hold down the Command key as you click the items you want to select, or drag a selection rectangle around the items.
    Do one of the following:
    To move items between events or libraries: Drag the clip or project to another event or library.
    To copy items between events or libraries: Option-drag the clip or project to another event or library by first starting to drag and then holding down the Option key as you drag.
    Work with multiple libraries
    http://help.apple.com/imovie/mac/10.0/#mov3fa25bae7
    Take care,
    Alex H.

  • PDF outputs continually crash after editing an html source file

    I have English and multiple localized versions of a RoboHelp webhelp project. I have created several PDF outputs for the localized versions. I can generate the PDFs fine when I don't touch any of the html source files.
    However, I had to make a change to one of the html source files to remove a <dl> from the source file. After making the change to the source file in an outside text editor (Notepad ++), I went back to RoboHelp to generate the PDF, and the PDF output crashed.
    The reason I was using an outside text editor is that when I tried to edit the <dl> HTML tags in RH, its HTML editor deleted all text within the tags being edited.  There was no undo at this point.  In anotehr attempt to use the RH Design editor, RH didn’t delete the <dd> or <dt> tags when those tag styles were changed to <h4> and <p>, respectively. RH inserted the new html wrapper inside the existing ones, instead of replacing it.
    Also, during the PDF generation process, a Visual Basic error message will appear dozens of times stating that the application was interrupted.  I must press OK to continue for each error message.
    What gives with the PDF generation failing like this?

    I hate to say it but it sounds like something you are doing in the external editor is not liked by RoboHelp.
    It could just be the way that text editor codes the file. I use EditPad Pro and that has various options for text encoding. My guess is your editor is not set to what RoboHelp expects.
    Aftr that what I would do here is create a new one topic project and recreate the problem, with the minimum of text. It may help you spot the code RoboHelp does not like.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

Maybe you are looking for