Where do RAW image file go when importing images into iPhoto?

I've imported images from my camera card into iPhoto but I want to have access to the RAW files format. I was given the option of erasing the data from the card after import but luckily I opted to not erase because I can't seem to find the RAW images on the computer. Does iPhoto not import RAW image files? I want the RAW file format for obvious reasons.

By default all imported photos are copied into the iPhoto library. To edit them in an external editor check the box in the iPhoto preferences to use RAW with external editors or export the photo with kind = original
LN

Similar Messages

When importing photos into iPhoto I get an error Unreadable Files:

When importing photos into iPhoto I get an error Unreadable Files: The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data).
I can open the JPG in question with PREVIEW, photoshop etc.. actually if I try to import a photo that I had originally imported it also fails..
Please help... Thank you..

I too had this error message (and to be honest, it was becoming a bit of a pain). I resolved it in a slightly different way to Terence.
I had 10 photos that were allegedly unreadable; however, as Terence rightly says, they are duplicates. When I opened iPhoto I mad a note of each of the files concerned and did a Spotlight search throughout my hard drive.
For each photo, there were four or five duplicates. I deleted all but one of each of the photos and then reopened iPhoto. No more error message.
The original problem stemmed from importing my files directly from an external device I was using with a previous computer [that was running XP].
Anyway, hope this helps.
Andy

Fix variable text (File Name) when importing INDD into INDD

More of a fix request than a new feature:
Simply put, the variable text (File Name) shows the file extension when the document is imported into another INDD regardless of the variable text specifications in the originating document. This is unexpected and undesired.
Please see problem description in this thread: http://forums.adobe.com/thread/489492?tstart=0

Seconded. Currently, I don't use this variable in this way, but I can envisage future scenarios where it would be a problem.
And it seems a strange thing to miss out on ... (why would an INDD file behave different?)

"Unreadable files" when importing photos into iPhoto

OK, I just recently got a new iMac - my first time using iPhoto. All seemed well for a while... until I started to import my photos into iPhoto from my HD (which I had copied over from my old G3).
The problem was that as I was importing some of the photos I got an error message saying the following:
"Unreadable files: 7
The following files could not be imported (they may be an unrecognizable file type or the files may not contain valid data)."
Now I really don't understand why it's saying this, as the 7 files it is referring to are just normal jpegs straight my from digi-cam. They are just like all the hundreds of other photos that were successfully imported.
Any ideas or help would be much appreciated!
Thanks.

Abstractman23:
Welcome to the Apple Discussions. Were the photos you were trying to import located within an old iPhoto library folder/package? When you got the message did iPHoto display the file names of the files it couldn't import? What were they?
If you were trying to import a library folder then the unrecognized files would be the database files that are part of the library structure.
If you are trying to move your old library from the G3 to the new Mac, just copy the iPhoto LIbrary folder/package intact to the Picture folder of the new Mac. Move any other library out beforehand. Download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field. Now launch iPhoto and it will open the library and, in an older version, update it to iPhoto 7.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How to see all image file types when saving images without selecting "all files"

Hallo, and thank you fom reading.
I am a person who saves a lot of images online in different folders with different names like G - 456 or F - 35.
I have been using firefox 10.0.2 for a long time because of a bug (I guess) that made it easier to save images.
When I saved an image it would always show me all the image files in any folder I wanted to save it, and that way making it easier for me to save files with the right names.
Now with the newer firefox (currently 19.0) whenever I try to save a JPEG I only see the JPEG files in the folder and only way to see the others is by selecting "save as type" all files, but with this I also see all the files that are not images.
This used to save me a lot of trouble and a bit of time but I dont see anything in the options menu that can help me. Is there a way to recreate this function?
Thank you for your time.

I suspect this is a Windows problem. I am surmising the FilePicker uses the Operating System or Desktop facilities. Does Windows 7 offer any other file categories like ''images'' ?
I do not normally use Windows 7, but may the option depend upon the directory being an indexed one, I ask after finding this thread ''Bring File types tab back'' [http://www.windows7taskforce.com/view/819]
This question is a duplicate of [/questions/951764]
Normally I would lock the duplicate question, but in this instance I will leave it open as it is unanswered and someone may give a better reply.

Removing Edited Images & Remembering Changes when importing back into the Lightroom

I'm looking for the following solution:
I would like to
1- edit raw or jpg files in lightroom,
2- remove the images from the lightroom library.
3- import them back when needed with changes and ratings, basically with all the changes being remembered.
How can I make import back the images, including the changes I made to them?
Please help & email me too if possible.
Thanks,
Alexander
photorama [at] gmail.com

Could you describe what you mean by removing images from the library? To some it means deleting from the database and trashing the actual image; to others it means removing the info and pointer to the file in LR but leaving the image in place; still others - possibly you- mean it to remove the images but leave the database and Previews.
 
 

 color="#600000" size="2">~~ John McWilliams
 
 
 
 MacBookPro 2 Ghz Intel Core Duo, G-5 Dual 1.8; Canon DSLRs

Error message when importing photos into iPhoto from iPhone 4S

Why is this happening? This is the message I get when I now try to import my photos off my iPhone "ERROR DOWNLOADING IMAGE: iPhoto cannot import your photos because there was a problem downloading an image." PLEASE HELP ASAP. Thanks!

Good afternoon
There seem to be a number of possibilities.
Here is a thread that conatins a number of solutions. The most common one is to load 50 pics at a time.
https://discussions.apple.com/thread/3947440?start=0&tstart=0
Hope this helps

Keeping keywords when importing photos into iphoto on second computer?

I'm transferring my and my husband's photos from our individual computers to one central computer.
I can't figure out how to combine our iphoto libraries and keep all the keyword data.
I transferred his library intact and then imported my photos from my "originals" folder. Which file is the one that stores the keywords?

riegelmom:
Welcome to the Apple Discussions. The only way you can do that is with the paid version of iPhoto Library Manager. It will let you merge two libraries and keep rolls, albums, keywords, etc. Well worth the investment.
Do you Twango?

RAW images are "locked"when imported into LR

I just got a new camera (Sony alpha 6000) and all my RAW images that I attempt to import into LR 4.4 are "locked" and therefore, cannot be imported.
When I click on the photo in my HD file and look at the "Get Info" the photo is not "locked".
Can't find any setting on my camera that shows the photo as "locked". Anyone know if this is a LR problem or a Sony problem?
I have a Nikon D40 that has no problem uploading RAW images to my LR 4.4.
Thanks for any help!!

Sony Alpha 6000 raw files require at least Lightroom 5.4.
You would need to upgrade Lightroom, or use the free Adobe DNG converter version 8.6 to convert your RAWs to DNG and then import those into Lightroom.

When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?

When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?
This is happening even with photos that were taken on another camera, not just mine. My daughter told me that the laptop recently fell. The yellow streak is not anywhere else on the laptop, just on the photos in LR.

I have had this problem on my desktop. I have been attempting to reproduce it where it can be debugged. Here are some observations/facts in my environment--no conclusions:
1. I do not import from camera or memory stick directly into LR. I copy all images (using Explorer) from camera to two different locations (backup location first); and then my working area. In both cases, after files are copied I mark them Read-only.
2. Poor observation, but in any event: the issue has only occurred when I do a large number of images. Its a poor observation as I have no exact number. I suspect when I do less than 50 always works well every time. However, I have also done some very large imports without issue.
3. Error only occurs with my RAW images--for me that's NEF. I have multiple cameras--those that only capture jpg images have never had an issue in LR.
4. Even if the file is marked Read Only issues can still occur. I then remove the image from the disk using LR -- and then manually (Explorer) copy in my backup image -- re import again and all is well. I think one time I exited LR and replaced the bad file with a backup and restarted LR and all was well again.
5. When it occurs I have performed a HASH value on the broken file and on the backed up file to determine if the file contents has changed--and each time the file contents has changed.
6. I have had this occur immediately after import, but most often it occurs like this... import large number of images; Make changes in Development Module on random image, export jpg of changes--exit LR. Open up LR and file is corrupted.
7. I have had this issue on multiple USB drives ( okay just 2 different drives have been tested ).
What next--fire up Process Monitor and monitor the system (specifically LR) to see if it reports any file open for write access when this occurs. So, far I have not had process monitor actually running when it occurs--one of these days.

Where is it best to store all imported images in PSE? I've recently changed it and got myself in a complete mess.

Where is the best location to store imported images in PSE? And if I cannot locate files will I be able to find them after changling the stored location?

lets use tb31... I just don't remember V7 all that well
Now when you receive a mail with remote images do you see the options button in the attached image

Files Renamed when importing to LR4 and now can't find them in LR3

Help! What should I do???
Yesterday I installed LR 4 Beta. I had a folder with 300 images in it on LR 3, obviously all files had names. I imported these photos into LR4 to work with LR4 and they were renamed in the process. Now in my LR3 folder, all the files still have there old names and the "missing photo ?" and I assume that's because the name has been changed and LR3 can't find them. Any thoughts on an easy fix?
Thanks,
Matthew Kraus

Thanks so much for helping me with this.
I must admit, I didn't pay too much attention when importing this "test"
group of photos to LR4, therein lies my problem. Now that I look at the
import settings that were used:
1. Files were not added or copied, they were "moved" to a new location and
also renamed.
2. Files were renamed starting with "264" using my regular import template.
Listed below are the first 10 photos with their original LR3 and he
changed LR4 names.
1201_001 changed to 1201_264-2
1201_002 changed to 1201_265-2
1201_003 changed to 1201_266-2
1201_004 changed to 1201_267-2
1201_005-Edit-Edit changed to 1201_268-2
1201_005-Edit changed to 1201_269-2
1201_005-Edit changed to 1201_270-2
1201_005-Edit-Edit-2 changed to 1201_271-2
I have a back up of my images on an EHD from several days ago which has the
original file names, but this backup only has 203 of the 268 images I
imported yesterday and are renamed.
Thanks again,
Matthew Kraus
2012/1/11 Dorin Nicolaescu-Musteață <[email protected]>
Re: Files Renamed when importing to LR4 and now can't find them in LR3 created by Dorin
Nicolaescu-Musteață <http://forums.adobe.com/people/dorin_nicolaescu> in *Photoshop
Lightroom* - View the full discussion<http://forums.adobe.com/message/4132062#4132062>

Flash cs5 keeps crashing when importing images.

Flash cs5 keeps crashing when importing images onto stage. I plan on tracing a drawing I made. They aren't that big so I don't know why cs5 crashes. Any ideas how to fix that? Thanks
I'm using windows 7- 64 bit.
Quard processor and 8 gb of ram
Here is the error I recieve:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Flash.exe
Application Version:    11.0.0.485
Application Timestamp:    4badda9d
Fault Module Name:    ntdll.dll
Fault Module Version:    6.1.7600.16385
Fault Module Timestamp:    4a5bdb3b
Exception Code:    c0150010
Exception Offset:    000845bb
OS Version:    6.1.7600.2.0.0.768.3
Locale ID:    1033
Additional Information 1:    2865
Additional Information 2:    2865b1bb537c4d5e61b79207bc968f0a
Additional Information 3:    ddf9
Additional Information 4:    ddf98ab5688195f8b48f91f047120c5a
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

I got the same problem. I tried to import into Flash cs3, cs4, cs5 - constant error in each application.
But seems I've found the reason why this happened in my case.
I just deleted the installed system video codecs (divx, xvid, third-party codecs).
I do not see a direct connection with the import objects into flash. But fact, immediately after the removal of codecs it has to work.
I suspect that the reason could be a third-party codec that is associated with playing QuickTime. Maybe.
Also if it does not help you this way, I used a temporary solution.
Open the psd in Adobe Ilustrator, copy images to clipboard, paste it into flash.
In my case the images are not displayed on the screen after insert, but put into the library.
Don't touch objects, just save the file, close the Flash.
Launch Flash and open saved file. In my case in the first run was an error.
Close the application and open it with file again.
The second time the error was not followed, the images were within the document 8-)
This option made it possible to work until the issue is not solved completely (adobe, wake up!).
win7 64, cs5 (cs3, cs4 had the same issue)
Perhaps it can be useful for someone.
thx
Sorry for my English.

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
It only cares about length i.e. max 2 hours including titles etc.
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

When Importing Images, How Do I Remove The White Space Around The Corners?

When Importing Images, How Do I Remove The White Space Around
The Corners?

u may use magic wand (and magic wand setting) from Lasson
Tool to select and delete that white space, but u must break a part
to the picture first.

Where do RAW image file go when importing images into iPhoto?

Similar Messages

Maybe you are looking for