Where is it possible to batch process the size of images?--I am able to change pixel dimensions in image processor but not image size in inches.

Hi- I need to batch process images for video project. I am able to change the pixel dimensions in the image processor but don't seem to have the option to change image size in inches. Please advise! Thanks

You don't need inches for video (or screen viewing in general). It all goes by pixel count. Inches is for print, nothing else.
But to answer the question, you can run actions in the Image Processor, and this is where you set size in inches. Just bring up Image Size, uncheck "resample image", and specify size. You'll notice resolution changes to reflect the fact that the existing image pixels are now redistributed over the new print size.
But again, screen doesn't care about size or resolution. It only counts pixels.

Similar Messages

HT5557 hello...my questions is related to objective C...Is it possible to display name of the person who is calling me whose number is saved in my local database but not in iphone contacts ?.

hello...my questions is related to objective C..
Is it possible to display name of the person who is calling me whose number is saved in my local database but not in iphone contacts ?.

ashish35,
No one from Apple here - we're just users like you. All I can tell you is that electronic fail and with MacBook Pros (and most notebooks) the components are so integrated as to make a repair to the logic board practically impossible, hence the high prices charged for repairs.
Only you can decide if you want to have your computer repaired or put the money towards the purchase of a new computer. If you do decide to purchase a new unit I would suggest that you also purchase the AppleCare Protection Plan which increases your warranty from one year to three years.
Sorry and good luck,
Clinton

I want to play video on my computer to make some analysis to frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program

HI All
I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
I used IMAQ AVI Read Frame VI
for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisition

Hi abdelhady,
I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
Thank you,
Emily C
Applications Engineer
National Instruments

I would like to connect my Apple TV 3rd gen to a projector and not an HD TV (so I can watch movies on the big screen). Are there any decent price compatible projectors? Good quality but not professional! Many thanks

I would like to connect my Apple TV 3rd gen to a projector and not an HD TV (so I can watch movies on the big screen). Are there any decent price compatible projectors? Good quality but not professional! Many thanks

Thank you for the answer, I suppose the main thrust of my enquiry is to find out if 65 MBits is my ATV theoretical limit of reception. If that is the case then I am happy as a Pig in Mud
I may have allowed myself to become a victim by listening to Fanbois posting elsewhere who always seem to go one better than everyone else. Now I have learnt two things Today; 65Mbit/s = Good enough and only read the apple forums.
Many Thanks
Nick

How do I update the iCloud ID on my phone? I changed my ID on my laptop, but my iphone still has "sign in to iCloud" with the wrong ID and I cant figure out how to change it.

How do I update the iCloud ID on my phone? I changed my ID on my laptop, but my iphone still has "sign in to iCloud" with the wrong ID and I cant figure out how to change it.

I have same question

HT201250 If time machine puts all of my photos onto my external hard drive using time machine, can I then delete the photos from my computer put view them again from the external hard drive? Basically, can I free up space on my mac but not lose years of p

If time machine puts all of my photos onto my external hard drive using time machine, can I then delete the photos from my computer but view them again from the external hard drive? Basically, can I free up space on my mac but not lose years of photos?

To add to Niel's comment bear in mind that if you have a backup copy on an external HD and later delete the orignals on your Mac HD you will then only have one copy - so no backup.
If the pictures are precious you should have at least two copies, and ideally another copy kept off site,

TS3274 I keep getting an error when trying to download a tv series right on my iPad from the iTunes store. I am able to download on my laptop then synchronize but it's a hassle specially if my laptop is not with me. All other Apps seem to be working fine.

I keep getting an error when trying to download a tv series right on my iPad from the iTunes store. I am able to download on my laptop then synchronize but it's a hassle specially if my laptop is not with me. All other Apps seem to be working fine. Help!

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I dropped my macbook pro off my couch and when it landed it was shut, i opened it and it was on a grey sceen so i shut it down with the button and when i turned it back on it was kind of slow but not anymore i just want to know if i should be worried

i dropped my macbook pro off my couch and when it landed it was shut, i opened it and it was on a grey sceen so i shut it down with the button and when i turned it back on it was kind of slow but not so much anymore. i quit all of my applications before i shut down and i noticed that when there are no more things t quit and i click "hide finder" its not grey anymore it still gives me the option to hide it when i dont need to, little things bug me and i just got this laptop, i just want to know if i should be worried

I suggest you immediately make a backup of your data. You don't know if or when the computer will show some symptoms from the drop. You may want to, for piece of mind, take the computer to an authorised service center for assessment. No one here can assess any internal damage you may have done.

I have broke my screen on my iphone and i am replacing it today at the apple shop will i be able to change from the white handset to the black handset?

i have broke my screen on my iphone and i am replacing it today at the apple shop will i be able to change from the white handset to the black handset?

Sorry, no. An out of warranty replacement will be of the same model, same colour, same capacity.

I want to use icloud but i have a lot of music on itunes that has been downloaded from elsewhere on the internet. Will i be able to access this on icloud if it has not be bought through itunes?

I want to use icloud but i have a lot of music on itunes that has been downloaded from elsewhere on the internet. Will i be able to access this on icloud if it has not be bought through itunes?

Not on iCloud itself - what you need is 'iTunes Match' which seeks to find versions in the Store of songs you already have, and failing that allows you to upload your own copies. This will cost you $24.99 per year; it does not count towards your 5GB free iCloud space. Limit 25,000 songs (purchased songs do not count towards this limit). You will need iTunes 10.5.1 or later on your Mac or PC and iOS 5.0.1 or later on your iPhone 3GS or later, iPod touch (3rd and 4th generation), or iPad.
Please see this page: http://www.apple.com/itunes/itunes-match/
Also note that some people have found that when using this facility with songs which contain strong language, iTunes Match is substituting a cleaned-up version.

Is it possible following batch processing using javascript...?

Hi Everyone,
Is it possible with in javascript following batch processing?
• Open all PDF files in folder
• Get which font to be used
• Get which color plate to be used (i.e.) CMYK or RGB
• Get page trim size width and Height.
• Close the file
• Past in Excel or note pad
Please help me, i have do so many files do the same process.
Thanks in advance.
-yajiv

Some time ago I was looking for a way to find out a pdf’s page-count and this was one of the solutions I was presented with (Bridge might offer a better sollution, though):
#target photoshop
thePageNumber = getPDFPageCount ( File.openDialog("select pdf"))
alert (thePageNumber);
// by jezz, based on something by xbytor i guess;
function getPDFPageCount(f) {
f.open ('r');
var gotCount = false;
while (! gotCount) {
next_line = f.readln();
if ( f.eof ) {alert("Aborting the script\nWe've got to the end of the file without finding a page count");
     f.close();
     exit();
     if (next_line.indexOf ("/N ") > 0 && next_line.slice(0, 9) != "<</Length" && next_line.slice(0, 9) != "[/Separat") {
     var p = next_line.match (/\/N (\d+)\/T/)[1];
     gotCount = true;
     else if (next_line.indexOf ("/Pages") > 0 ) {
//      alert (next_line);
     var p = parseInt(next_line.substring(next_line.indexOf("/Pages") +6), 10)
     gotCount = true;
f.close ();
return Number(p);
I suppose this approach could be modified to address some of the features you are looking for.
But the issue might be a fairly complicated one, as a pdf may for example combine many different TrimBox-sizes.
Have you asked over in the Bridge Scripting Forum, too?

Should the print company I use be able to change a file to spot color for me?

I recently sent a document in to a major print company to have a folder printed. The document was created in Illustrator using only two colors. They said they could not print it because it was still more than two colors and that I needed to change it to a two color document using Pantone Spot Color.
I've never had to do that for a print company before but I've also never had a two color project before. I opened the file back up and selected my objects and "recolored" the work and deleted all the swatches aside from the two colors I needed that were now Pantone Spot Color (HSB). It literally took me 2 minutes.
The reason I am asking is because they pretty much said that I don't know what I'm doing, which to a designer is completely insulting. We all do new things from time to time but that is an insult. Shouldn't they, a large print company with years of experience, know how to do this for me? They had the original design file.. Maybe they don't know what they are doing?
Any clarity on as to why I needed to do it and not them is greatly appreciated. Also.. any direction as the best way to use spot color over cmyk is appreciated too.

...which to a designer is completely insulting...
What's so special about "a designer"?
Prior to the mid 1980s, designers could get away with prima Donna attitudes, because they (or their employers) were paying pre-press "color houses" around $350 per hour to tweak colors to sooth their oh-so-erudite discernment and hyper-developed color sensitivities, and to gain reimbursement for the $100 per plate lunches on proof-check days.
That all changed when designers (and their employers) got tired of paying those fees and took on the responsibility for the technical side of assembling their designs into something printable. That was the so-called "desktop revolution" and "revolution" was not a bad word for it. It turned a huge industry on its head. Color houses which didn't adopt PostScript devices and workflows were soon dropping like flies--and so were designers who didn't climb down off their lofty pedestals and buckle down to learning the technical realities of what they were doing.
Don't be insulted, but the simple fact is, you still don't know what you're doing if you think converting any given process color job to a two-spot job is "just a couple of minutes' work." Only in the very simplest designs would it be as simple as re-defining a couple of process Swatches as spot color Swatches.
In Illustrator in particular, doing so won't even work if the original Swatches were not originally defined as Global Swatches.
If those two process Swatches were used in any Blends, converting them to spot will likely not update the intermediate steps of the Blend. In earlier versions of Illustrator, the same problem applied to grads.
You can often get away with not having properly trapped the file with process swatches, because there are potentially four component inks which may be shared between adjacent different-color objects. Spot inks are not so forgiving. Trapping is essential if the two spot colors touch.
So you really expect a printer to just have a policy to do that for you? And thereby bear responsibility for anything they may misinterpret or overlook that may cause a registration sliver on press and thereby loose every bit of profit on the printing (which these days is cut-throat competitive)?
No. It's your responsibility to build the file correctly. The printing houses I use know better. They know I would have a coniption fit if I ever caught them modifying one of my files. They know they are to return any problem file to me for correction.
JET

I'm trying to install adobe acrobat XI pro, the trial version. The Install Download Assist pops up but the program doesn't install. I do see a file named XI Pro, but not a program. It seems the program never completely downloads. Any suggestions? Thanks.

I've tried to download the trial version of Acrobat XI pro but it's not working. The time bar is active for the download and indicates that it will take two hours. When I come back, the screen has gone back to the "install free trial here" page. I do see a file for XI Pro, but not a program.

try a direct download,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How do you know what the data usage was for and why? It shows you date and usage but not the reason.

How can you see what data usage was for on the bill? It only shows the date and usage but not the reason for the usage.

You can not see this info on VZW's site. There are apps for smartphones that will break down the info though, but by site or what was downloaded

When e-mailing pdfs, the text becomes blurry/blocked, but not images

Recently, when e-mailing pdfs to certain individuals, they complain that the pdfs they receive contain blocked/blurry text. ALL of the text is dropped or blurred, but not the images. I originally thought that it was a probelm with only the pdfs created from Publisher, but this week it happened to several pdfs that I did not originally create. One person uses his iPad to view files, and wants all pdfs created as "Print to PDF" options--however, that compromises the resolution of the file. Does anyone else experience this probelm? Is there a solution?

Please let me know which device are they trying to open the PDFs on? Are they trying to open it on their desktops or on a portable device?
Also, what happens if the same PDF is not opened via mail but is open directly on the individuals machine? Is the behavior the same.
Thanks
Ankit

Where is it possible to batch process the size of images?--I am able to change pixel dimensions in image processor but not image size in inches.

Similar Messages

Maybe you are looking for