Where is my Line-In? (Audigy 2

Ok when I go to record, in the options all I can pick from for Recording Source are the following:
MIDI Synth
What U Hear
S/PDIF-In
CD Digital
Analog Mix (Line/CD/Aux/TAD/PC)
Microphone
Wave
NO LINE-IN!? So I figure Analog has to be it... Only when I attempt to record with the Analog Mix setting, I get NOTHING. The only Line-In is in the PLAYBACK section of which, if you have that selected, you get nothing but feedback recorded... so how on earth are musicians supposed to record with a home studio set up on this card?
Anybody managed to figure it out yet?

So yours doesn't look like this (minus the BoomDevice)  ?
Hold command space bar and type in spotlight: Audio MIDI Setup and press enter.
Look here  (Minus boomDevice of course)
See if you see pretty much the same thing I'm seeing.
If not I'm not sure how to go about fixing it directly, but you can do these two things.
1: Create and log into another user account, take a look again and see if your problem resolves itself.
then you know it's a "user" specific issue or not
You can try and delete the
com.apple.systempreferences.plist
file from the problem user account of User/Library/Preferences folder, reboot and enter your system preferences again, that might fix it.
Also try running ALL of OnyX's cleaning and maintainance aspects and rebooting.
http://www.titanium.free.fr/
this has been known to clean out gremlins in the system before
If those don't work, then think about moving your users files to the other user (if it works there) via the Shared folder under the main Users folder and running off of that.
If the problem is also in the other user and the above repairs don't work, then
1: Backup files to a external storage drive and disconnect, disconnect all other drives and media.
2: Clean and polish the bottom of the 10.6 installer disk with a soft cloth and a bit of rubbing alcohol. Hold c boot off the 10.6 disks (grey or white)
3: Simply reinstall OS X on top of the installed version, it won't mess with your files or most third party programs.
4: Some programs that install kernel extension (kext) files might break before after the next step, (kext files are loaded when your machine boots up) so your going to have to make sure you got all 10.6.8 compliant versions of third party software before going on.
5: Software update to 10.6.8 (only choice now) needed for security and other updates.
That should fix your issue hopefully.

Similar Messages

  • Where is phone line jack on computer

    New HP
    Can't locate where the phone line connects to PC
    Usually on the back

    Quinby wrote:
    Hp envy 810-130qe
    Hi,
    Based on the following specs, it does NOT have both modem port & wireless, it ONLY has LAN port:
        http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03954512
    If you wish to have a modem port there are few options:
    (a) Install a PCI modem card on your computer, it has few free slots in there. The following link shows few examples:
          http://www.ebay.com.au/bhp/pci-modem
    (b) USing USB modem dapter, similar to the following example:
         http://www.miniinthebox.com/usb-2-0-fax-modem-external-56k-v-92-v-90-black_p716332.html?currency=AUD...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Pin connections, Line 3, Line 2 & Line 1 Audigy 2

    Does anyone know the minplug output pin connections for Line 3, Line 2 and Line on Audigy 2 ZS? I need to separate out individual speakers for 5. with RCA terminatons for input to my surround amp. I had emailed Creative Customer Support without luck "We do not have much information on that". Creative doesn't have these adaptors available as accessories. I plan to have them custom made but need to know pin assignments.

    Landry98,
    For a 6. setup there is only cable that needs to be a 4 pole (RCA Stereo +Video) minijack, The other two are stereo. The four pole connector is used to connect the Front Center, Subwoofer, and Rear Center. The other two connectors are stereo outputs. Now if I was having expensi've custom cables made I would do it differently. I would have 2 - 4 pole minijack to RCA cables made and - 3 pole minijack to RCA cable. This way if you upgrade to 7. at some point you won't have to have a new cable made.
    However for 6. audio the Audigy 2 ZS will need a minimum of a Stereo connector for the front left and right (Line Out ), a Stereo connector for the Rear Left and Right (Line Out 2), and a 4 pole (Stereo + Video) connector for the Front Center, Subwoofer, and Rear Center (Line Out 3). For 7. you would change Line Out 2 to a 4 pole connector to allow for the extra channel.
    Jeremy

  • Problems Controlling Line in - Audigy 4, Adobe Audition

    Hello,
    I just recently got Adobe Audition version 2.0. I have been running my mics through a Fender Passport PA head, then into my computer for a while, with my default soundcard and Acoustica Mixcraft.
    Now, I have an Audigy 4 (with the little box thing) and am using Adobe Audition, and I can't control the line in volume. I have tried messing with all of the line levels with the Creative console, the default windows controls, and even a third-party volume control, none of which works.
    Please, if anyone has any clue what's going on, I'd much appreciate some sort of solution. I'm trying to record drums, and they're LOUD.
    Thanks.

    Software based level controlling:
    In Audition, use ASIO drivers.
    When ASIO is used, you can control input/recording levels through Audition (if there is a control for this) and through Surround Mixer (or Windows Playback control panels) Line-In Source slider -> i.e. the "recording level" setting in surround mixer does not have effect when you're working in ASIO mode (neither has wave source slider).
    Hmm.. can't you also use Mixcraft controls for this, if you have routed your mics through it?
    jutapa

  • Where is the line tool in Elements 12? I used this a lot in Elements 7.

    I cannot find the line tool in Elements 12. I cannot draw lines with arrows at all. Does anyone know what happened?

    craig
    Are you using Premiere Elements 12 or Photoshop Elements 12? And, on what computer operating system is the program running?
    If you are talking about Premiere Elements 12/12.1, there is a line tool in the Shape section of the program's Titler. No arrows however unless
    you try to draw them in with additional maneuvers of the line tool there.
    If you are referring to the line tool in Photoshop Elements 12. The line tool is in with a group of tools.
    In the screenshot, look to where I have the red arrow pointing in the toolbox. If it is not displaying there as the line tool, then click on it, which brings up the Options Bar for that tools group. Then select line tool in that Options Bar. The line tool options will be displayed in the Option Bar.
    In the above screenshot, the custom shape tool was showing originally in the toolbox, with its options in the Options Bar. And, I next clicked on the line tool in the Options
    Bar to use change the choice to use it and its options..
    Photoshop Elements questions should be posted in the Adobe Photoshop Elements Forum.
    Photoshop Elements
    Please let us know if the above worked for you.
    Thanks.
    ATR

  • Where is my line connected ??

    Hi folks,
    I am posting this again as it appears not to have gone live on the forums. I am getting conflicting information when I ask this question. Is my line connected to the Headford exchange or to the HRD1_002 cabinet ?
    One person in sales have told me that I am connected to the exchange while other say they cannot tell. Here is a part transcript
    "BXXXX: thanks for holding Damien, I have checked your address and as yet efibre is not enabled , there , you are connected to exchange Headford , I am checking exchange now for update"
    I can send you the full script if you need.
    Also I have recently seen some post here where you have confirmed the connected cabinet etc.
    I have PM'd EircomAlan on this as he seemed to answer the above posts I have read. Can I find this answer out please.
    Thanks for your time.
    Damien

    Hi IrishOmen
    Your line is connected to the cabinet number "HRD1_002"
    Cheers
    Al
     

  • 5.1 Speakers and Line In - Audigy 2

    Hi,
    I have an audigy 2 zs and klipshc 5. ultras. There is an input on the speaker volume control, but when an ipod is plugged into it sound only comes out the front 2 speakers.
    Is there a way to make it come out all fi've? Maybe using the line-in on the soundcard?
    If I plug something into the line-in, what program would i use to play that on my speakers, or would it automatically play because its plugged in? Would it be 5. (or just play out of all 5 speakers) either way I do it's
    Thanks,
    Craig Beale

    Craig Beale,
    The reason you are getting only front speaker output is because those audio track from the the mp3 player are only stereo(2 channel) and not AC3(5.) track, unless your speaker system itself have some extra feature/option to upmix stereo to a 5. surround soundfield. If not, go with Shag suggestion.
    Jason

  • Where to obtain Archived/older audigy driv

    Well, I have an original SB Audigy sound card and when I installed the "newest" set of drivers for the card, I know have issues when I play games of the sound crackling and distorting. I would like to go back to the older drivers to see if that would help me out. Of course CL offers no help when I wrote to them because my product is long past warranty. So does anyone know where I can go to get these older/archi'ved drivers? Thanks.

    CD (ISO image) - http://badboy.filefront.com/
    Old driver packages - http://www.station-drivers.com/page/drivers.htm
    (does [url="http://us.creative.com/support/downloads/download.asp?MainCategory=&nRegionFK=&nCountryFK=& nLanguageFK=&sOSName=Windows+XP&region=&Product_Na me=Li've+Platinum&Product_ID=3203&modelnumber=&dri verlang=033&OS=0&drivertype=0&x=40&y=3">Li'veDrvUn i-Pack[/url] suite for Audigy cards too?)
    jutapa

  • Moving the point where my BT line enters the house

    Hello all,
    I would like to upgrade to Infinity 2. My current BT hub is connected to a socket in the living room with my PC upstairs connecting wirelessly. The property used to be 2 flats and the old disconnected phone socket (approx 2 years old) is next to where my pc now sits. Will the engineer move the point at which the phone cable enters the house from its current position to upstairs. Our freesat box connects to current home hub so to continue using iplayer can the engineer run an extension outside the house from the new master socket back to the socket downstairs.
    Will this be done within the installtion costs or will i be charged extra.
    I don't want to use wireless from downstairs to upstairs as we currently experience poor signal and would like to utilise the Infinity speeds available.
    Thanks in advance
    Andrew

    They can run a data extension kit (which is just cat5 network cable) up to 30m from the existing master socket position to your chosen location within reason which doesn't generally include drilling holes, or running externally.
    Further details - http://bt.custhelp.com/app/answers/detail/a_id/37163/346
    BT Infinity (EASTF) 58.93/15.94 Mbps [IP Profile: 60.8/20 Mbps] using Openreach Modem & Billion BiPAC 7800N

  • Where is the line tool?

    Help! I'm using Photoshop Elements 9, and I need to use the line tool, but I'm darned if I can find it.
    I know it should be in the upper-left part of the screen, above the tools, but no matter which tool I select
    (including the rectangle tool), there is simply no sign of the line tool. How do I get it to appear?
    Thanks,
    elinwm

    Left click at a starting point, keep holding down the mouse button. press the shift key on the keyboard,  and drag out the first line.
    Repeat for the other 2 sides of the triangle.
    Note that each side is a separate shape layer in the layers palette
    You can also get a straight line by holding down the shift key with the brush tool, or the eraser tool.
    Post back with your progress.

  • Where is the line input on my hdx16 laptop?

    Is there a way to change the external mic jack to a line input?

    You will need a USB device to which you can connect an input cable. If your cable uses a 3.5 mm mini-plug, then you can try using a device such as the Griffin iMic or any similar USB sound card that has both input and output jacks, connects to USB, and conforms to standard USB protocols not requiring any special drivers to work on a Mac.
    Here'sone other such candidate. Google searching will likely find you many others.

  • Where has the line that showed all my add-on icons gone to?

    I have add-ons for no-script, screengrab, and forecastbar. Until yesterday, they all displayed icons (or actual weather info) on a line just above the bottom Microsoft line and at the very bottom of the browser. Now they've disappeared. Noscript shows as "options" first time I get to a page, but never displays status (names of scripts allowed, etc.) and won't display once I've set. Screen grab icon and weather info have completely disappeared. I've tried reinstalling, but it makes no difference. The only thing I've done in the last day is install the latest version of Adobe Flash. How do I get this back

    Same problem here
    I tried the toggle of view/not view and it makes no difference. I tried safe mood of firefox (ver 3.68) (firefox -safe-mode). No difference! Strange thing though, four other of my Windows 7 machines exhibit no such ill affects.

  • Where did the lines go on "notes"??

    I love the note app. I use it for my business inventory/ordering but now I've noticed that the lines on the pages have disappeared. Is there someplace I can go to resolve this? I've looked in the forums but unable to find anything.

  • Help with T-SQL script. I cannot tell where is that line based on line number. Thx

    rrr

    If the error is indeed here, then try
    CAST(@KillDays * @VarianceFactorPrcnt * -0.24 AS INT)
    But in fact the value should be INT, not decimal for the DATEADD function.
    For every expert, there is an equal and opposite expert. - Becker's Law
    My blog
    My TechNet articles

  • CRM table where transaction line item status are stored.

    Hello,
        Can anybody suggest me the standard transaction table in CRM where on passing line item guid as input, i get the status ( like release, open completed... ) of those line item in the transaction as output.
    Regards
    Devika.S

    Hi,
    CRM_JEST  pass OBJNR as your item guid.
    for the description of status check TJ02T - System status.
                                             check TJ30T - User status
    ~ Kishore

Maybe you are looking for