Where is my stationary?

Where is my stationary--since upgrading, I can't find it or add it to my toolbar?

open "new message".  To the far right is the icon for "show stationary" click on that and your templates will show up.  If the icon isn't there you can put it back.  while in "new message" click the toolbar and customize toolbar and the icon for "show stationary" is in there.  They have two different toolbars for mail.  One for general mail and one for new messages.  Hope this helps.  I found all my custom stationary there also.  Stationary wasn't part of the default toolbar  in the update. 

Similar Messages

  • Where are "User Accounts" located in 10.9.4?

    I read what I believe is a forum answer to a question about locating Mail Templates in Mavericks, and the route described to locate the templates was given as: User Account > Library > Containers > com.apple.mail > Data > Library > Application Support > Mail > Stationary > Apple > Contents > Resources > Custom > Contents > Resources.
    I decided to check on these Templates myself, but got stymied at the first step; "User Account." Any ⌘+F search resulted in a long list of unrelated files that were no help. How do I get through that 1st step?
    Gear: 27" iMac (early 2014) - 3.5 GHz Core i7 - OS X 10.9.4
    Thanks -

    Thanks Niel: you got me started OK. However, I ran into a problem outside the purview of my original question. When following the chain as described abov, I got to Application Support > Mail, then had to stop because the Mail folder was empty! And, it had been that way since 3/5/14, i.e. around the time I bought this iMac. Now, do I need to post another question, like, "where's the 'stationary' file that's supposed to be in my Mail file? And, should I be suspicious of the word 'stationary,' while suspecting it might be 'stationery,' given its context w/mail and templates?
    Again I really appreciate the solution; could you please direct me to my next step?

  • Is it possible to find or export the Stationary in the Mail application?

    Hello,
    I normally use the Mail for e-mail but at work I'm on a PC and use Outlook Exchange which has me experimenting now with Entourage 2008. I figured out how to add background in Entourage but is it possible to export the Stationary section in the Mail app so I can use it as a background in Entourage?
    Or where is the Stationary part of the Mail located on my hard drive? Not sure if this can be done but I love the Stationary feature in Mail and want to try and get it in Entourage.
    I would appreciate any tips you might have.

    This is the answer I found on another forum:
    stationary for mail is stored in /Library/Application Support/Apple/Mail/Stationery - there's more folders after that, so you'll have to keep drilling down, but that'll get you there. each stationary item (.mailStationary extension) is actually a package folder with all the images inside, organized using an html template and a plist file. unless entourage supports a direct conversion of mailstationary you'll have to muck with it to get the results you want.
    It's the best solution I can find but not sure I want to attempt it.

  • Problems Setting Up Mail Account

    I've been using Thunderbird and just want to give Mail that comes with OS X a try.
    Having problems trying to send mail after setting up the account exactly as Thunderbird. SMTP.ATT.YAHOO.COM as outgoing and pop.att.yahoo.com as incoming.
    I've tried everything but can not send mail.
    Also, where is the stationary that can be sent out in the emails?
    Thanks!

    I was having the same problem. I finally found that when setting up the account do not check the box for Use Secure Socket Layer (SSL) and do not check Use Authentication. Tha did it for me.

  • Cannot Get Maps 2.0 to work on my N95 8GB

    Hi there everyone! Just a quick one..
    Ive got a N95 8GB, i recently updated to Nokia Maps 2.0 using PC Suite etc..
    It all works and i can move around and search for addresses so i THINK I am connected to a sattelite!
    Only thing is, my position is wrong, on my mates phone it follows him where he goes where mine stays stationary??
    Also I want to enable voice guidance etc but i cannot figure it out. I have gone to extras and drive + walk but even if i pick Vodafone Internet or a WLAN network it says failed...
    Anyone have any ideas on ways to get around this or 3rd party applications that have voice guidance and WORK lol
    Thanks in advance!
    Message Edited by raha_ang on 15-Oct-2008 04:45 AM

    Hi raha_ang
    Unfortunately I didn't pick up on Walk & Drive which is a Vodaphone specific application and you would have to contact them regarding issues. I know that there have been problems on N96 where it say "update available" yet connection cannot be made.
    In an "unbranded" N95 8GB you would find if you go to Menu > Tools > Settings > General > Personalization - now scroll down to bottom of screen and below "Factory settings" there is "Positioning" - in "Positioning methods" there should be a red tick beside Assisted GPS, Integrated GPS and Network based.
    In "Positioning server" the server address = supl.nokia.com
    Please check in "Positioning methods" that "Bluetooth GPS" is not enabled and "Integrated GPS" is enabled (Red tick)
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Where can I find more stationary?

    Where can I find more stationary, For instance Christmas cards ect. That are compatible with mail. Thanks in advance, Carl

    Have you tried a Google search? Here's one that comes up:
    http://www.equinux.com/us/products/stationery/index.html

  • Expanding text box in mail stationary

    I am trying to put together a photo newsletter in Mail using the Tack Board template in the stationary. I thought that I would be able to expand the area where the text goes to add more text, but it won't let me type past where the blue box ends. Is this really preset or is there a way to lengthen the box and have more text?
    I was assuming this as the little icon at the top when you are choosing stationary looks like its text box is bigger then the one when you open it.

    hlhaley wrote:
    I am trying to put together a photo newsletter in Mail using the Tack Board template in the stationary.
    Just be aware that e-mail is a very poor transport mechanism for such things. If any of your recipients don't have Apple Mail, they may not see the message the same way you do.
    I thought that I would be able to expand the area where the text goes to add more text, but it won't let me type past where the blue box ends. Is this really preset or is there a way to lengthen the box and have more text?
    There is no way to change the template. Those templates are hard-coded with heavy doses of black magic.
    I was assuming this as the little icon at the top when you are choosing stationary looks like its text box is bigger then the one when you open it.
    Those are just static icons.

  • Excise invoice printing is required in preprinted stationary format.

    Dear All,
    I developed a new program & script for excise invoice printing. The requirement is as under: Page layout will be such where 10 line items( as maintained in billing document) can be printed in each page i.e. if billing document have 25 line items (including Finished goods & accessories) , so it should be printed in 3 pages. In each pages,  page no should be printed first, then consignee address, customer address, Date, SO number, Tin no etc. Those above details should come in header portion of each page. Then first 10 line items can be printed. If there are more line items, then next 10 items get printed in next page & so on. In the very last page only assessable amount, Tax, VAT, Educes amt & Gross amt along with Excise number, removal time, type if invoice, payment mode etc (in footer section) should be printed. If billing document have only 10 line items, it will be printed in a single page.
    I have declared First page & next page only. In each page I have declared required page window according to window size of preprinted stationary format. For that I have used DINA4 page format( size 210 / 297 MM). But actual height of stationary format is 12 inch ( 305 MM).
    In print preview it is displaying supereb. All required data is being displayed properly. But when I am taking printout from Dot-matrix printer, from second page onwards it start printing two lines prior to actual position (two lines going up).
    I did some permutation to adjust it. But I can not find a proper resolution to it. My thinking is that it is only printer setting problem. Also in PC level in printer setting I used custom paper size declaring actual paper width & height.
    Please advise whether it is script/ program problem or printer setting problem.
    Regards
    Srimanta

    Dear Bapujee/Santosh/Srimanta,
    I know this is a very peculiar problem. Actually the SAP paper size definations are over-ruled by spool server's print manager's defination i.e. the setting of the PC's finally works.
    Simple solution is create a paper size in the PC and set the printer with the new paper size.
    Now, you will encounter another problem. The user may using the printer for other paper size printings also. To avoid the changing of PC's paper size every time the user prints different size, you can adopt this :
    In the spool server (i.e. the PC with printer), create different printers with required paper size and name this printer with some meaniful names. Now, in R/3, while printing with LOCL output device the user can select the required printer.
    This can be done for network printers also.
    All the best.
    With Regards,
    Abhijeet.

  • Printing on Pre-printed stationary from XML Publisher

    Hi,
    I have a requirement where a report is to be printed on pre-printed stationary from XML Publisher. The stationary would be NCR paper and has to be printed from a dot matrix printer.
    My first question is whether report generated from XMLP can be printed thro'
    dot matrix printer, coz as far as i know it takes only character format .If yes, do we need any special handling?
    If anybody has any experience related to this problem, please let me know the approach.
    Can mail me at [email protected]
    Regards,
    Satrajit

    Hi Milind
    I see what you've got.
    It is not uncommon to use character mode output for pre-printed stationery.
    This would appear as draft output from a Dot Matrix printer. I hope you understand what I mean here. It is somthing like printing using fixed width font.
    Design and run the report with MODE=CHARACTER from the command line.
    You need to figure out and design the layout in such a way that you are printing in the empty spaces provided in the pre-printed stationery. This is usually by trial and error method. You may probably blow several pre-printed stationery sheets before you get it right.
    Regards
    Sripathy

  • Any Ideas Where to Buy a Nice Ethernet Cable?

    Hello-
    My ethernet cable has hardened.  Any ideas on where to get a nice flexible ethernet cable about 2-4 ft long and without the plastic clasp?

    stationary store?  Like give me an example of a stationary store.
    Not sure where you are but examples arround here are Office Max, Office Depot, Staples.

  • Why do you force us away from genius iweb? Where can I get iweb to my mbook pro with Lion? Upgrade and loose iweb?

    Hi
    I´m new here so I don´t know if theese questions are reacheing the Apples staff or only for the community useres..
    But I put my frustration out here anyway.. :-) (and sry for my norwegian/eng)
    I have like 12 differerent wen sites that I manage, very simple made, but working, thats why I like iweb cos it´s simple and it works.
    I have now finnaly taken the step away for PC laptop also, so I went buying a brand new macbook pro weith Lion the other day.
    Wanted to work on the websites while and travelling, so I copied all the domain info from myc stationary mac to a USB, ready to put into my new friend..
    What????
    No iweb in the programs..
    So there goes that plan into pieces... How to I fix that case? Buying an old ilife and try to intall it?
    Then I wanted to upgrad my stationary mac... but reading forums before I do so... DO NOT UPGRADE IF YOU ARE USING IWEB!!!!
    Well, thats enough said for me to cancel upgrading for me..
    WHY ARE YOU FORCING US AWAY FROM YOUR IWEB???
    WHY NOT MAKE A PROGRAM THAT CAN COVERT OUR IWEB INFO TO ANOTHER PROGRAM?
    I THINK YOU APPLE GUY´S NOW ARE FORCING US TO DO MOORE AND MOORE STUFF... AND I DON´T LIKE IT ONE BIT!
    YOU ARE FORCING US TO LOOK OVER OUR SHOULDER AND BACK TO WERE PC IS AT THE MOMENT.. HAVE THEY IMPROVED SO I CAN GO BACK??
    So, as you can understand here, I don´t like the direction that where Apple is going, it´s very roude and to much business now a days..
    Not taking care of it´s customers I think..
    If you take my point here in basic norw/ eng...
    Ok, that smy frustrations, have a nice day all!
    Majortilt

    majortilt wrote:
    So there goes that plan into pieces... How to I fix that case? Buying an old ilife and try to intall it?
    That will work.  The latest version of iWeb does run on Lion (with a couple of quirks). 
    But be aware that iWeb is clearly a dead end;  fixes/updates/improvements are highly unlikely, and it may quit working with new versions of OSX (possibly even future updates to Lion).
    If you're using MobileMe as a host, that will stop in June of 2011, so you'll have to move your site elsewhere.  You can still use iWeb with it; a few changes are required on the Site Publishing Settings page, of course, but they're pretty simple.  And a few features won't work, but there are workarounds for them.
    I recently moved my iWeb site from MobileMe to GoDaddy, and it was relatively painless. 
    See https://discussions.apple.com/community/ilife/iweb for much more discussion.

  • Purchase order form printing is required in preprinted stationary format

    Dear All,
    I need one VERY URGENT HELP from you.
    Client wants to do printing Purchase order form in preprinted stationary format i.e. using this format they want to print PO document only for certain variable fields each time in our Laser printer,but some fields (which are already) lying will not be printed. (But in the PDF Download of the form for each document number all the fields must appear).
    Could you please guide me what are the sequential steps need to be followed, where & how in order to incorporate "preprinted stationary format" scenario in my
    Purchase order form. Also, if possible, please tell me in brief what is the meaning of preprinted stationary format & why we are using it / purpose of it.
    Awaiting your favorable reply at the earliest.
    FYI. Anyways, I have convinced Client that we will provide PDF attachment of form only to them, not Excel attachment. Thanks very much for encouraging me.
    Thanks & Regards
    Sudipta

    Hi,
    Thank you for your valuable input.
    Please tell me what should be my approach i.e. sequential steps need to be followed & where ( with the related configuration / settings changes, necessary coding changes & where, if possible, please send me one realtime scenario and its related documentation related to my concerned issues at the earliest as it will be very beneficial for mine. I have come across this scenario for the 1st time. Kindly guide me with your documents) in order the incorporate the below requirement:
    After modication of standard Purchase order form using SAPSCRIPT I / Client want to download it into PDF attachment individually corresponding to each PO number. In this PDF attachment all the fields will appear.
    But when I / Client will take Printout of this modified PO form (say for example ZMEDRUCK) only certain important information / certain field values will be getting printed, not all.
    User will be able to give ranges of PO document numbers for printing at a time based on their requirement, here all documents as specified by the user will be getting printed at a time, but one document printout followed by another document printout , and so on.
    We want to print PO sapscript form in "Print output" only. Also, please guide me how many & which output types, message type etc we need to configure & how for the above requirement ( i.e. download of the ZMEDRUCK form into PDF with its all the fields values + printing this ZMEDRUCK form for printing certain important information using "preprinted stationary format".)
    FYI. We are using Laser Printer for printing SAPSCRIPT forms.
    Awaiting your valuable fruitful feedback with necessary documents at the earliest.
    Thanks a lot.
    Have a very nice time ahead.
    Thanks & Regards
    Sudipta

  • Share photos by email - where are the templates ?

    Hello, can anyone tell me where in Aperture 3 are the nice looking pre-made templates which exist in iPhoto when sharing photos by email?
    Thxs,

    I just tried it from Aperture and it works great. All you have to do is select the photos you want to email from within Aperture. Right click, output, email and Mac Mail will open placing the photos you've selected in a new mail dialogue box. Once they are there, just click Stationary (which is in the upper right portion of the new mail dialogue box toolbar. After you click stationary, pick the template that you want, and the photos are automatically dropped into place. If you don't like the template, you can choose another and the photos automatically switch into the new template. If you don't like the arrangement, just drag the images around and they will automatically switch positions. It really couldn't be easier. And remember, you have the ability to control the quality of the image that is sent via the Aperture preferences, export tab. I don't think it matters when you are using templates, but for future reference, you should set this the way you want from the beginning so that the images get sent at the quality you want.
    I hope this helps.
    Mac
    Message was edited by: macorin

  • Mail stationary in Snow Leopard

    From many messages I have read, the Mail program comes with built in stationary. If I look on my hard drive, this fact is supported by the existence of a Stationary Directory in the Library - Application Support of the Mail program. However the Show Stationary button is nowhere to be found nor is there an option anywhere in Mail to make it appear. Where is it?

    It should be at the far right of the New Message pane. You might need to enlarge your window. If not, do View > Customize Toolbar to put the icon where you want it.

  • How to create stationary in Mail

    I would like to create a stationary template in Mail. Any easy ways to do this?
    Thanks
    DC

    I have the same question and issue. How do you save the pictures after you place them in the "place older"?
    I compose the email text, click the stationary icon and select the stationary I want, the text shows up correctly, then I drag pictures to the stationary. I try and save as stationary the "save stationary" is not highlighted. I have tried several ways with no luck. I want to save the stationary just how I like it, without having to recreate it every time.
    Suggestions as to where I'm going wrong?

Maybe you are looking for