Where is stored? - Maintenance plan marked for deletion.

Hi all in wich table is stored that a maintenance plan is fixed to delete? I can not see in table mpla ... and i don't know how toi check if the plan is marked for deletion.
Anybody know in wich table and field is this indicator stored?
Thanks in advance!!!

hi Miquel,
this is a bit tricky: the information is in table JEST (statuses).
MPLA-OBJNR = JEST-OBJNR
there should a status for deletion, pls. note there are system statuses and user statuses.
hope this helps
ec

Similar Messages

  • Mark maintenance plan items for deletion or delete them

    Hello,
    due to an user missunderstanding we have some maintenance plan items in our system which are not required (table MPOS).
    Is there a way to mark such items for deletion or to delete them completly?
    Thank you
    Kind regards
    Manfred

    Hi,
       I think ther is no way to directly delete the Maintenance items, u have to assign them in a dummy maintenance plan then make MP inactive , set deletion flag & Archive ... thus it applies to Maintenacne items also check this link http://www.sapfans.com/forums/viewtopic.php?t=173192
    regrds
    pushpa

  • "Marked for Delete" flag in Hyperion Planning

    Does anybody know how can I set "Marked for Delete" value by ODI? I have reversed planning model by RKM, but it hasn't field "Marked for Delete".
    Thanks a lot in advance

    user11340418 wrote:
    Hi John,
    In that case, what is the best practice for deleting a Hyperion Planning shared member.
    I have to delete a shared member manually from Planning front end.
    Is there a better way for deleting planning members?
    Cheers,
    RSHi, the Marked for Delete is nothing to do with deleting shared member.
    You can can delete members by using the Operation column and it set to Delete, you will have to provide the member to delete and the storage type of Stored.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Where did i find users that are marked for deletion ?

    Hi,
    Experts,
    As i want to check that the users present in table USR02 are marked for deletion or not? can u please suggest me soon on this.
    Thank u in advance,
    Shabeer Ahmed

    Deleted users list in SRM server

  • Marked for delete

    delete

    user11340418 wrote:
    Hi John,
    In that case, what is the best practice for deleting a Hyperion Planning shared member.
    I have to delete a shared member manually from Planning front end.
    Is there a better way for deleting planning members?
    Cheers,
    RSHi, the Marked for Delete is nothing to do with deleting shared member.
    You can can delete members by using the Operation column and it set to Delete, you will have to provide the member to delete and the storage type of Stored.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Open Production Order with Mark for deletion

    Hi
    Friends again stuck in open production order
    i want to calculate  production order quantity for open production order,
    only those production order which dont have mark for deletion.
    I find a field in afpo XLOEK ..but it wont get reflects when done changes in CO02
    Then i used the table JEST and i want to delete those aufnr which has deletion flag i wrote the folowing code pls do correct me where iam wrong .
    IN this code  deletes aufnr which are marked as deletion  ?
    SELECT afko~aufnr
           afko~gamng
           afko~plnbez
           afpo~dwerk
           afpo~psmng
           afpo~matnr
           INTO CORRESPONDING FIELDS OF TABLE i_afko
           FROM afko INNER JOIN
           afpo ON afpoaufnr = afkoaufnr
           WHERE afpo~dwerk = s_werks
          AND   afpo~matnr IN s_matnr
          AND afpo~elikz = space.
    LOOP AT i_afko.
      CONCATENATE 'OR' i_afko-aufnr INTO i_afko-aufnr.
      MODIFY i_afko.
    ENDLOOP.
    IF NOT  i_afko[] IS  INITIAL.
      SELECT jest~objnr
             jest~stat
             jest~inact
              INTO CORRESPONDING FIELDS OF TABLE i_jest
              FROM jest
             FOR ALL ENTRIES IN i_afko
             WHERE objnr = i_afko-aufnr.
    ENDIF.
    LOOP AT i_jest INTO wa_ijest.
      IF wa_ijest-stat = 'I0076' and ( wa_ijest-inact = SPACE  ).
        DELETE i_afko WHERE aufnr = wa_ijest-objnr.
      ENDIF.
    ENDLOOP.
    i_afko1[]  =  i_afko[].
    SORT i_afko BY matnr dwerk.
    DELETE ADJACENT DUPLICATES FROM i_afko COMPARING matnr dwerk.
    loop ....
    calculate :quantity
    endloop.
    Regards and answers will be rewarded points

    thnks
    solved the problem
    regards

  • Mark For Deletion of STO's which purchase order history

    Is there a way, where I can set mark for deletion for a STO which has partial goods issue/receipt { i.e. it has purchase order
    history }
    Thanks In Advance!!

    Dear,
    Check solved question: Re: To close old STO with inbalance GI and GR
    Regards.
    Syed Hussain.

  • Is it possible to change warning "& is marked for deletion" to a hard error

    As part of our periodic update of our bank directory in transaction BAUP, Bank Keys which are no longer valid are marked for deletion. We are not at the point where we are archiving records yet, so the actual deletion has not occurred in our system.
    When an HR user updates a person's bank information (transaction PA20 or PA30, InfoType 09), if they enter one of these bank keys, they are given a warning that the bank key is marked for deletion. However, this is not a hard stop, only a warning message. As a result, they are able to save the record with an invalid bank key. The details indicate that this is message class F4, message 230. However, it appears from the IMG that it may be message 210. I have tried working with each of them.
    I have attempted to change the message to a hard error in message control, but have not been able to do so.  I receive an error telling me that "Message 230 (or 210) is not allowed". I have tried several application areas, including FV, Electronic Banking Messages.
    Is there any way in configuration to change this to a hard error? If so, please supply details, including application area.
    Also, are there risks of disruption of standard business processes if we do change this to a hard error? I know that this same message is issued for other master data elements which are marked for deletion such as GL accounts or Customer records,
    Thank you.
    I have searched forums with terms "marked for deletion" and "warning" but have not found an answer. I have also searched various outside expert forums on this topic. Everything I have seen seems to assume that this message will be a warning only.
    Aoife B.
    Edited by: Aoife Bratton on Oct 16, 2008 4:16 PM
    Edited by: Aoife Bratton on Oct 16, 2008 4:16 PM

    If particular message is not allowed in OBA5, then it is not configurable message. Neverthless if you like to change this message, you need to configure this in OBMSG first

  • Vendor Marked for Deletion

    Dear Experts,
    I have marked one vendor for deletion. But at the time of invoice booking it gives and warning and allows the posting.
    I wanted to changes the warning message to Error Message.
    I have check the setting in OBA5, Entered the Application Area F2.
    For the following message numner, I am trying the change the standard message type to E but after chaning when I press enter, it takes 'I'.
    128 Vendor & is marked for deletion
    129 Vendor & is marked for deletion in company code &
    130 Vendor & is marked for deletion in purch.organization &
    And solution to this problem?
    Thanks
    Paul

    Hi Ajay,
    Thanks for looking into it.
    done as below,
    128     E     E      I
    129     E     E      I
    130     E      E     I
    then fk06 where I am selecting
    All Sales
    Selected Company code
    General Data
    Selected company code incl general data.
    After all of above I am getting as wanrning still.
    Any mistake in my prosecc.
    Paul

  • How to reset OpenLDAP service that was marked for deletion

    Hi,
    I installed the Shared Services, Essbase and Planning in my PC. After installing it, I went to services screen. I found that OpenLDAP service was in 'Started' and 'Disabled' status. When I try to change the status of the service from 'Disabled' to 'Automatic' or 'Manual', I am getting an error 'The specified service has been marked for deletion'. If I tried to stop the service, the service is vanishing from services list. I am consistently facing this issue even if I tried to reinstall all the modules. Can any one tell me how can I resolve this issue?
    Thanks in advance,
    Chandu

    Hi,
    I take it that after it has been marked for deletion and you reboot then the service is removed?
    I am not sure what version you are on but for 9.3.1 to create the OpenLdap service again,
    open a cmd prompt to directory
    *\Hyperion\SharedServices\9.3.1\openLDAP*
    and type :-
    slapd.exe install OpenLDAP-slapd "Hyperion S9 OpenLDAP"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Settings for Mark for deletion for setting the exchange Rates

    Hi all,
    Can you tell me where is the settings for Mark for deletion for setting the exchange Rates.
    User has deleted all the MEND rates in 'OB08'.
    and he cannot input them again, gets error message "an entry with this key is marked for deletion"
    Rg
    vk

    Hi
    Try as said in help - Message number is SV010
    You can:
    enter another key
    delete the entries before entering the new entry
    The entries flagged for deletion can then no longer be reactivated.
    End the error dialog with Cancel. Choose Save and repeat your new entry.
    reactivate the entry marked for deletion to change it :
    and return to the overview screen with Back.
    Choose Display deleted entries in menu Choose to select all the deleted entries.
    Mark the entries that you want to reactivate.
    Choose Retrieve.
    VVR

  • Can a PO be generated using Info record marked for deletion

    Hello all,
    Is it possible that PO be generated using Info record marked for deletion?
    Observed that a info record is marked for deletion but still able to see a PO generated using this info record.
    Is this becasue - PO can be generated untill info record is actually deleted from the system during next reorganization run?
    What is reorganization run?
    Regds.,
    Chaitanya

    Hello S. Iyer,
    I have following queries -
    1. What is meaning of your statement -
    "If you want to restrict creation of POs against deleted info record"
    Do you mean that info record is "deleted" or "marked for deletion"?
    2. Any way, is there difference between two -  "deleted" or "marked for deletion"?
    3. Where in the info record I can see history of marking for deletion to see who and when marked it for deletion?
    4. Observed that there is a message that comes up that info record is marked for deletion.
    Is there indication on info record itself like - permanent record, tick mark to indicate that it is marked for deletion?
    Regds.,
    Chaitanya

  • How to find BPs marked for deletion in ECC at CRM side ?

    Hi team,
    We had a custom search FM in which we will fetch data from CRM mastertables passing id/name/ contact details etc. I used a view 'bbpv_buyer_addr' with which i was succesfully able to get the result.
    Now a new change is suggested that, if the BP is marked for deletion at ecc side, then this should not get picked up in the above mentioned search. So can any1 tell me where is this mark for deletion field/flag set in CRM ? i mean which table or view?
    These are the inputs i am getting for this search -  bpid/ last name/ country/ state/ zipcode/ city/ street/ county.

    Hi team,
    We had a custom search FM in which we will fetch data from CRM mastertables passing id/name/ contact details etc. I used a view 'bbpv_buyer_addr' with which i was succesfully able to get the result.
    Now a new change is suggested that, if the BP is marked for deletion at ecc side, then this should not get picked up in the above mentioned search. So can any1 tell me where is this mark for deletion field/flag set in CRM ? i mean which table or view?
    These are the inputs i am getting for this search -  bpid/ last name/ country/ state/ zipcode/ city/ street/ county.

  • Error 1075: The dependency service does not exist or has been marked for deletion

    Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
    Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
    snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
    In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
    not exist or has been marked for deletion."
    Rebooting gets me nowhere.
    In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
    Any ideas, please?

    Hi,
    Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
    Kim Zhou
    TechNet Community Support

  • How do I tell if a user profile is marked for deletion?

    This is likely a question with a simple answer, but searching through Google and here hasn't helped.
    How do I tell if a user profile has been marked for deletion?
    Will it appear in the "Manager User Profiles" area of the User Profile Service Application management? 
    Do I need to look somewhere else? 
    This is probably obvious, and I just have looking disease, but your assistance is most appreciated!

    As Paul said you can see that on UP admin page. also you can use powershell to get the list of all use in powershell.
    Follow this blog:
    http://iedaddy.com/2012/02/sharepoint-2010user-information-lists-and-user-profile-cleanup/
    $upa = Get-spserviceapplication <identity>
    Set-SPProfileServiceApplication $upa -GetNonImportedObjects $false
    Set-SPProfileServiceApplication
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Maybe you are looking for