Where is the best location to find info. on iDisk?

I need to find out about how it syncs, how it overwrites or which direction it moves. How to turn it off and more...
Thank you.
iMac 2.0 GHz Intel Core Duo 20" 512MB (early 2006)   Mac OS X (10.4.6)   iBook G4 OS X 10.4.6 256MB

Go to http://www.apple.com/dotmac/, select Stay in Sync, and then click on See how it works link. Check out the .Mac features for more details.

Similar Messages

  • Where is the best place to find Widgets?

    Obviously there are lots and lots of different widgets out there, some free, most not. Where is the best place to find a good package of them that won't cost me an arm and leg?

    Personally, I'd recommend my site, but I'm a little biased
    However, Adobe just launched a new directory that lists many of the widgets available, no matter who develops them. You can go to MuseWidgets.com to see the directory and search and find one that does what you're looking for.

  • Where's the best location to place Wireless router

    I have a two story house and want to know the best location to get the besp reception inside and outside the house

    The best place is generally somewhere near the center of the area where you want wireless service.  Ideally, the signal should pass through as few walls as possible, as it travels from the router to your wireless computers.  Try to locate it away from other electronics (i.e. don't put it behind your monitor, near a 2.4 GHz telephone, or near a microwave.).  If you have a primary desktop computer, there are some advantages to keeping it within eyesight, as this lets you quickly check the status of the router if there is a problem.   Finding a good location is sometimes just a matter of trial and error, so don't hesitate to try out a few spots.  If you find 2 locations that are equally satisfactory to you, then consider your neighbors, and locate it where it is least likely to bother them.

  • Where is the Best place to find new and good iPhone Apps?

    Hey Everyone!
    I wanted to get your opinion on what are the best sites or places to find iPhone Apps.
    J.J.

    I have been looking around at a lot of app sites lately.... and although appshopper is ok, I think the BEST site is:
    http://www.FreshApps.com
    I find myself going there a couple of times a day finding the new apps! That is my 2 cents.
    Message was edited by: jjmancini

  • Where is the best place to find iSync / Entourage HELP ?

    Can anyone pease point me to the best best place for Entourage help - I am having trouble with SyncServices from 11.2.3
    Thanks
    I have a million duplications and no way of removing them !

    You should probably start here, at the most comprehensive Entourage-related site on the web:
    http://www.entourage.mvps.org

  • Where is the best place to find Mac G3 B & W monitor help?

    I have a G3/350 rev. 2 Motherboard running OS 9.2.2 and an Apple 17" studio CRT monitor
    The machine is working fine except I have been through 3 CRT monitors over the past year. I could use some reliable guidance as I attempt to troubleshoot this issue.

    In addition to the total number of hours of previous usage, the internal components of CRT displays can age, even when they sit unused for long periods of time.  The ambient temperature range of the location where stored can hasten this process.  Your (3) CRT displays sound as if they fell victim to flyback transformer failure, which typically occurs when the insulation on the windings degrades and allows arcing to occur.  As for the surge protector, if there were a reasonably strong voltage spike on the electrical lines to your home that the surge protector had to absorb, any further protection capability would have been zapped.  With no LED lit to indicate protection, a damaged surge protector may continue to function as a power strip.  If a voltage spike had damaged your displays, I think it would also be likely that other connected devices would have been affected, like the computer.  If the power cord had an internal open-circuit defect, the display wouldn't function at all.  If the cord had an internal short-circuit, it would trip the circuit breaker on the surge protector (if it has one) or in the panel in your home. Good quality surge protectors protect each receptacle on the strip, so it's preferable to connect the computer, display, and peripherals individually to it. That's why I'd never use the adjacent power connection on the computer's power supply for the display.
    "I picked up another studio monitor from a friend to try. It has rarely been used and is in mint condition..works perfectly on her G3/350 B&W. I have reservations about hooking it up to my machine before I am sure I won't  hose this one as well."
    Unless this is a long-term loan, I don't know what you'd be able to determine by temporarily connecting your friend's display, since you got at least (3) months of service life out of the other 17" Studio Display. If I were going to loan an older Studio display in mint condition/perfect working order to someone who had experienced your problem, I'd accept the possibility that my display might also become damaged.  With that in mind, I suppose that your friend would be understanding, if her display met the same fate as your others.
    If you decide you'd like to purchase a new, widescreen display, I think I'd change my previously-written suggestion for a graphics card upgrade, to finding a slightly newer/used G4 with an AGP graphics card slot. This would broaden the selection of compatible upgrade graphics cards, if one were needed to support the 16:9 aspect ratio of the new display.  At some point, spending $$ on a 12 year-old B&W G3 isn't a good investment, when the same amount of money could provide the benefits of updated technology.

  • Where's the best place to find Quartz Composer experts? (looking for a developer)

    I'm looking for a Quartz Composer developer who is 1) interested in working with an artist and 2) can give me a quote for a specific project I am developing.

    Apple hosts a bunch of mailing lists, one of which is for Quartz Composer devs. I read the list occasionally but have never really had the time to become proficient with QC.
    Start here for general info about Apple's mailing lists:   http://lists.apple.com/
    Then click the "Lists hosted on this site" link to see all the various lists. You'll have to subscribe to quartzcomposer-dev in order to post your questions to the list.
    The list is intended for technical discussions related to development and not really for job solicitation. But the usual folks on the list seem relatively friendly for the most part so I expect if you asked nicely and took any negotiations off-line that you wouldn't receive any flak.
    Steve

  • Where's the best location for the catalog file?

    To ensure Lightroom operates as efficiently and smoothly as possible, is there a best place to store catalog files?  Should they be with their projects or kept centrally on the main system drive?
    Regards
    John

    If you have a read of this article it will give you a good understanding on how the catalog works.
    http://www.mulita.com/blog/?p=42

  • Where is the best target location to put configuration files (.csv), report templates (,dotm) and instructions (.pdf) when building a LabVIEW program and installer?

    I am unsure of the best location to the above type of support files.  I would like the files to be available to all users accounts.  If I place them into something like c:\LabVIEW support files this can create an issue if manual changes are made to any of these files by a user without administrative rights.  I can also place them into public documents.  Any recomendations?
    Related.  I have added a PDF "help" file to the project. and given a path in the VI properties documentation field.  I have then added a custom runtime menu with "Help for This VI".  Running the application on my development machine, it works just fine.  Making this in an application installed on a test machine, results in the application crashing.  The PDF file is in the correct location on the target machine.  Any ideas?

    It seems you want to put the files where just any user can't get to them to edit them. Unfortunately, if the user account can't get to them, I don't think LV will be able to get to them. I could be wrong. To test this out, use a target location somewhere under your user account folder and then have another user try to run the app. if LV finds them then that gives you more options. If not, then you are going to have to have a common location that users are not likely to go to.
    I generally create a dedicated folder structure for LV apps on a target system as shown below.  I also make this the My Documents folder so that the LabView Data folder is created under this structure. Yea, it means that users can get to the files but that's where training needs to be executed.  If you are in a network environment, you can place the templates, config (ini) files, etc on a network location and users are a bit less likely to inadvertently navigate to them.
    I use both for some apps, Local folders for system specific files and Common folders on the network for files that all systems will share.
    Not sure if this will address your location issues but thought I would share it nonetheless.
    Doug
    "My only wish is that I am capable of learning each and every day until my last breath."

  • HT4061 I lost my IPhone5 and after 7 hours I called lost and stollen and now I can't track where was the last location I left the phone ,and I don't remember if I stablished the FIND MY PHONE app.

    I lost my IPhone5 and after 7 hours I called lost and stollen and now I can't track where was the last location I left the phone ,and I don't remember if I stablished the FIND MY PHONE app.
    Is there any way that I can find the last location that I left it,eventhough I called in lost and stolen and reactivated my # to a different device.

    If you didn't set up Find My iPhone or it otherwise does not appear in icloud.com, then there's no way to trace it. Notify the police and your cell carrier, and change any passwords for any online accounts you may have used from your iPhone (the iTunes Store, for instance). 
    Regards.

  • My ipod is lost and out of charge . whats the best app to find it or locate were itwas last used

    my ipod is lost and out of charge. whats the best app to find it or locate were it was last used ect

    There is no such app. There are apps  available that will periodically email the location but those have to be installed before it is lost.However, typically those do not works with iPods since iPod have to be connected to the internet via wifi to send the email.

  • Where  is the best place to save my projects?

    I dont know if I have been saving my Project right but I also have a external hard drives and I thought I was saving it their but I check it today and their is nothing on it . Where is the best place to save it or do I even need the external hard drive? Thanks

    No idea what you might have done wrong...
    By default your projects are saved in Macintosh HD/Users/~<name>/Music/Logic/ folder on your boot drive. Check it first.
    You can also try to open your project again using recent files list in Finder or in Logic itself. Then you can find the exact location of your project folder: in the Arrange select an Audio region and go Audio -> Show Selected File(s) in Finder. This will open Audio Files folder in the project folder (well, this will work only if external files are included in the project's assets).
    Another method will be using Spotlight (click on magnifying glass icon in the upper-right corner of the screen to open Spotlight and type in your the name under which you saved your project).

  • What is the best way to find a file on the servers disk without using web.xml?

              What is the best way to find a file on the servers disk without using web.xml?
              I want to find a configuration file not contained within the war file I have
              created. Is there a way to pass information into the ServletContext with out
              rebuilding the ear or war files? Tomcat 4.0 can do this in its server configuration
              files. Does BEA have the equivalent?
              Regards,
              Eric
              

    You can specify the path to the file as a system property
              eg
              java -Dconfig.file.location=./mydirecotry/myfile.txt com.test.MyApp
              "Eric White" <[email protected]> wrote in message
              news:[email protected]..
              >
              > What is the best way to find a file on the servers disk without using
              web.xml?
              > I want to find a configuration file not contained within the war file I
              have
              > created. Is there a way to pass information into the ServletContext with
              out
              > rebuilding the ear or war files? Tomcat 4.0 can do this in its server
              configuration
              > files. Does BEA have the equivalent?
              >
              > Regards,
              > Eric
              

  • Where is the best place for suggestiong requesting features?

    Where is the best place for suggesting/requesting features?
    If something like this already exists, please let me know.
    I often wish when I select a word to right click and choose dictionary to to find out the meaning of the word. Currently I have to copy, go to a dictionary web page, paste and search. And I spent a lot of time for that. I'm not that technically oriented to suggest how this can be achieved but just as an idea, may be Mozilla can partner with dictionary web sites by making a plug ins or include a dictionary with Firefox itself

    I am sure there are Extensions that do this.
    DictionarySearch - https://addons.mozilla.org/en-US/firefox/addon/68/
    Add-on search for Dictionary - https://addons.mozilla.org/en-US/firefox/search/?q=dictionary&cat=all&lver=any&pid=1&sort=&pp=20&lup=&advanced=
    Feedback - http://hendrix.mozilla.org/

  • Where is the best place to buy the new ipad? Please help

    I am ready to buy a new ipad.  There is no apple store in my town but I will be close to one in a couple of days.  My town has Best Buy, Target, and Walmart.  Assuming I can find what I want... in case I have issues with it, where is the best place to purchase from??  (as far as ease of return, etc). Please advise.

    Dah*veed ..... I do not disagree with what you said about the AppleCare+ protection plan as it does state on the website that proof of purchase is required - IF ... You purchase over the phone. Actually, I did not expect to be able to do this over the phone, but as I said I received the paperwork today via email.
    I copied this from the website and I'm typing this on my new iPad so it may come out a little distorted but you can read the sentence at the bottom that says it can be done over the phone with proof of purchase. I gave the rep my serial number, confirmed my address and CC details and the deal was done. I even called back later in the day to make absolutely certain that I did in fact purchase the AppleCare+ plan that has the two incidents of accidental damage included for a $49.00 charge. The rep did in fact confirm that I did buy the correct plan that I wanted and I am looking at the printed paperwork confirming the whole thing.
    Maybe I just got lucky!
    iPad - AppleCare+
    Every iPad comes with one year of hardware repair coverage and 90 days of telephone technical support. AppleCare+ for iPad gives you two years of repair coverage and technical support from the original purchase date of your iPad. And it adds coverage for up to two incidents of accidental damage due to handling of your iPad, each subject to a $49 service fee.1
    How to get AppleCare+
    You must buy AppleCare+ within 30 days of your iPad purchase.
    There are three ways to buy:
    From the Apple Online Store: When you order the new iPad or iPad 2, you’ll have the option to add AppleCare+ to your cart before you check out.
    At an Apple Retail Store (requires a Genius Bar appointment, inspection of the iPad, and proof of purchase).
    By calling 1-800-275-2273 (requires proof of purchase).
    Learn more

Maybe you are looking for

  • Print HTML doument without open it from an applet

    I need to know how I can print an HTML document from an applet developed with Jbuilder 4. I'm not a very expert developer and I need a detailed information about this problem. Important is that the HTML document is printed without open it. I use: win

  • I get an error code -12 when trying to install

    I was unable to unactivate it from the previous machine as the HD crashed. Now I get SDK error code -12 when the installer boots and then is crashes. How do I get LV on my new machine? I am on WIN 7 Dell E6400  The product is LV 8.6 for NI ELVIS II

  • Mail doesn't save sent mail on one of my email accounts.....

    Mail doesn't save sent mail on one of my email accounts. I have several accounts, but on one of them it just doesn't save any mail I send. Is there a hidden setting I've missed somewhere? I did delete the account and then reset it, but it took out al

  • Adobe Shared Review/A link to your distributed PDF

    After setting up a Shared Review and ensuring that I have chosen to add a link to the pdf for my reviewers, the link does not appear in the body of the e-mail that I send out. Can someone comment as to what may be occurring?  Using Acrobat X Pro. reg

  • Error while runing dbms_job.isubmit

    i created a procedure proc1 in user scott which inserts a sequence of numbers into the table called 'ss' . create or replace procedure proc1(a in number) is begin insert into ss values(seq1.nextval); end; Later i tried to run the dbms_job .submit fro