Where is the file which stores the users and groups policies?

Hi, as mentioned in the title..i would like to know which file stores the policies of the users and groups which i've defined. And where is this file stored? Thanks.

SteveGrisetti wrote:
Okay if I move this into our Tips & Tricks area for easy reference?
If you're asking me, I have no objections.

Similar Messages

  • What is the table which stores the SM04 currently active users data

    HI all,
    what is the table which stores the SM04 currently active users data in sap?
    plzzzzzzzzz help me..
    Thanks  all in advance ,
    Malti

    Hi,
    Pl. check in tables USR02/USR01 for the list of users & logon data.
    Regards,
    SDS

  • Need help to find the table which stores the infomation listed below

    Hi,
       I am working on Archiving work for archiving the data under the tcode SOST.I searching the table which stores the email document content but I am having difficulty to get the table..Could any one provide some input on this.
    Thanks.
    ~Donny

    I believe it is stored in table SOFFCONT1

  • What's the file that stores the saved tab urls?

    My laptop's screen broke. There were a lot of important urls I was saving through Firefox. My laptop runs on Windows 7. I'm not sure how current Firefox is, but it was updated within the last year.
    What is the file path to the file that lists the urls?

    See also:
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Bookmarks are stored in the places.sqlite file.<br />
    The tabs of the current session are stored in the sessionstore.js file.
    *http://kb.mozillazine.org/sessionstore.js
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Where's the file that stores the Recent Files list? (Mac OS)

    I closed a document yesterday that I had finished after saving a PDF from a saved AI file. When I went to "Open Recent File" and selected either the AI or the PDF, it says the file cannot be found.
    I would like to take a look at the path of where Illustrator thinks the file should be so I can narrow down why the file is missing.
    I've looked in /Users/(me)/Library/Preferences and haven't found anything.
    Thank you!

    I doubt this *.plist file will be any use to you… Why don't you go outside the app and use spotlight…?
    or just comm+f

  • Which file(s) stores the edits in a session?

    I just opened FCPX this morning and found the multicam edits I had done a couple of days ago had gone from the timeline. It seemed to have reverted back a week or so. The backup copy also seemed to be at that state. Annoying to say the least, but having done them again I was wondering which file in the FCPX file structure actually records and save the edits? Since the media and events don't change on a regular basis it would make sense to keep a running backup of the file which stores the edits. Can anyone enlighten me please?

    The edit information is saved in currentversion.fcpproject in the project folder.
    Get Pro Versioner to create archive copies for your project and event information.

  • How can i check the file  which is upload from  the server

    when upload the excel file from the server file to the internal table ,how can i check the data whether it accord with  the required condition .
    for example ,i want to upload the file which have the data whose type is pack, and it have three integer and  two decimal ,how can i check in my code.
    thanks,

    Hi Sichen,
    First upload the file, Then do ur validations and delete the records that doesn't satisfy ur requirements.
    Thanks,
    Vinod.

  • When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute.  The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

    When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute.  The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

    Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
    This happens the same whenever I try to install.
    To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
    My plugin is still showing as out of date.
    Is there anything you could suggest. Thanks for your time.

  • How to change default /Users and /Groups to different Volume?

    Users are created in /Volumes/<boot>/Users and groups in /Volumes/<boot>/Groups.
    We need these to be created on a different volume, eg., /Volumes/External/Users, and /Volumes/External/Groups.
    Setup Assistant correctly put user Backups into */Volumes/External/Shared Items/Backups* and also correctly put web services on /Volumes/External/ServiceData -- we want to do the same for Groups and Users.
    Groups are the most critical, as the group needs bulk storage. Users we could leave as is if it can't be done.
    How can this be configured? We've read File Server Admin, Open Directory Admin, and Advanced Server admin from http://www.apple.com/server/macosx/resources/documentation.html without finding an answer.
    Thanks in advance.

    1. Create new folders on the external volume to hold users and groups, but to prevent confusion name them something other than "Users" and "Groups". /Volumes/External/NetUsers and /Volumes/External/NetGroups would be reasonable choices.
    2. Share both of these folders (in Server Admin -> server name in sidebar -> File Sharing -> Volumes & Browse modes -> select each folder -> click Share near the top right).
    3. Enable both folders for automounting on clients (Server Admin -> server name in sidebar -> File Sharing -> Share Points-> select each folder -> Share Point tab under that -> Enable Automount option) with the default options (Directory: /LDAPv3/127.0.0.1, Protocol: AFP, Use for: User home folders and group folders). Be sure to click Save (not just OK in the dialog).
    4. To migrate users, run Workgroup Manager, and change the home location for the users you want to move (select Accounts in the toolbar -> /LDAPv3/127.0.0.1 from the hidden pop-up menu under that -> User icon tab at the left -> select the user(s) you want to change -> Home tab on the right -> select the NetUsers option from the "Where" list). Then, for each user, run this command on the server: "sudo cp -Rp /Users/username /Volumes/External/NetUsers".
    5. Similarly, move Group folders in WGM (Accounts -> /LDAP... -> Groups icon on left -> select groups to move -> Group Folder tab on right -> NetGroups in the list). Then, for each group, run "sudo cp -Rp /Groups/groupname /Volumes/External/NetGroups".
    6. Test to make sure all is working before deleting the old user and group folders from /Users and /Groups (do NOT delete /Users and /Groups themselves, just the individual folders from under them).

  • MAJOR Open Directory issue: Can't assign Users and Groups that DO exist!

    Just noticed the following today:
    When doing Get Info -> Permsissions on files/folders located on my File Server share, Owner and Group show as (unknown).
    When I go into WGM -> Sharing, and look at files/folders on File Server share this way, the Owner and Group fields are blank.
    When I attempt to (re)assign an Owner or Group by dragging them from Users and Groups section of WGM, error tells me User or Group no longer exists. These Users and Groups clearly do exist in WGM -> Accounts.
    When I look at files on File Server share via CLI, instead of actual names for Users and Groups, I see their uid and gid's. Chowning via CLI fails as well.
    I've noticed all Users and Groups with this issue are OD.
    Server is xServe G4 DP 1.0 GNz/1 GB RAM/Mac OS X Server 10.4.7 Unlimited. This servers been running fine as an OD Master for months now. ACL's are enabled on this File Server share point. I've always had weird permissions issues, but NEVER the inability to assign OD Users and Groups to files/folders.
    I'm at a loss here, not to mention my wits end.
    Did my OD become corrupted?
    Any and all help would greatly appreciated.
    PowerMac G4 733 MHz   Mac OS X (10.4.6)   512 MB RAM

    When doing Get Info -> Permsissions on files/folders located on my File Server share, Owner and Group show as (unknown).
    This means that the Finder can't find a match in the accounts/groups database for the numeric UID assigned to those files. Either the records associated to those accounts have been deleted, or the database is corrupt. In either case, you should restore a copy of it from backup.
    (15686)

  • Upgraded to 3.1 and lost all users and groups.  How do we get them back?

    We ran the update to Server 3.1 (from 3.0) on our Mavericks Mac-Mini Server.
    Everything had been fine before the update, but now all users and groups have completely disappeared.
    The only user we have is the main administrator log-in.
    Since we verified that all of our data, wikis, and other items are still in place, it might be easier to just re-create the groups and users (and permission therein).
    But, we cannot log into Workgroup Manager, nor can we add users/groups in the Server app (because it is "grayed-out").
    Can somebody please provide a suggestion??
    We are a small engineering firm with only 5 users, so it's not like this would take all day.
    Thanks, Mike

    Have you tried
    sudo sso_util configure -r REALM_NAME -a diradmin afp
    (cf. Lion Server: AFP users unable to authenticate with Kerberos after upgrading)in Apple Support ?
    p.

  • Creating OAAM users and groups in external LDAP i.e. OID

    Hi Experts,
    I am looking for the procedure to create OAAM users and groups in external LDAP i.e. OID.
    I am using 11gR2.
    Any pointers would be appreciated.
    Regards,
    Subin

    Check this link http://docs.oracle.com/cd/E27559_01/dev.1112/e27206/lcm.htm#autoId3

  • Changing users and groups settings without unlocking

    I recently upgraded to Mountain Lion and have noticed that I can change the settings in preferences for Users and Groups without unlocking.
    Should this be the case?

    I tried what you suggested but there is no change.
    Many Thanks

  • Restricted Characters: User and Group Names

    I'm going through the documentation for Essbase and I'm trying to find an exhaustive list of all the restricted characters/keywords for User and Group Names.
    I've found what I think is the list for Apps, DBs, Dims, and Dim Members here: Oracle Essbase Database Administrator's Guide
    I've also found a link that says the only restricted character for User names is a backslash: Essbase Administration Services Online Help
    Does anyone know if there are any other restricted characters for User names and Group names? I recently created the user @<>/\:';[]{} in Shared Services. I was surprised that it actually let me do it. I was even able to log into EAS using this user name. However, I couldn't add the Essbase server. However, the user did show up in the Users Table in EAS for that server when I logged in as a different user.
    So, does anyone out there have any info on restricted characters and/or keywords for Users and Groups. Anything on Enterprise ldap systems?

    I'm going through the documentation for Essbase and I'm trying to find an exhaustive list of all the restricted characters/keywords for User and Group Names.
    I've found what I think is the list for Apps, DBs, Dims, and Dim Members here: Oracle Essbase Database Administrator's Guide
    I've also found a link that says the only restricted character for User names is a backslash: Essbase Administration Services Online Help
    Does anyone know if there are any other restricted characters for User names and Group names? I recently created the user @<>/\:';[]{} in Shared Services. I was surprised that it actually let me do it. I was even able to log into EAS using this user name. However, I couldn't add the Essbase server. However, the user did show up in the Users Table in EAS for that server when I logged in as a different user.
    So, does anyone out there have any info on restricted characters and/or keywords for Users and Groups. Anything on Enterprise ldap systems?

  • When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the o

    When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the original in my work folder. I need to know how to stop this from happeing and get it back to the way it has been working he last 6 months since i purchased this program.

    Hi pissedadobeuser,
    Does this issue occur with any particular web page?
    Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
    Which Browser version, OS version and Acrobat version are you using?
    Regards,
    Rave

Maybe you are looking for

  • When right-clicking firefox in the task bar... v5 does NOT open a new tab, or open a new window when selected. Only crtl-N opens a new window iff Firefox is the active window.

    Today FF 5.0 was DL-d and installed (automatic update is/was active). Help->About-> shows version 5.0, and there were no problems with the install. I have ASUS G72 running W7 with the latest MS updates via auto-update. FF is pinned to the task bar. P

  • Printing Database

    I am trying to create a Phone Directory for my neighborhood. I have this information in a Numbers document. I created a Pages document in the format I wanted for the directory using the "mail merge" for the fields from the Numbers document. However,

  • RMI - How to detect the cease of client program

    Hi guys, Under RMI, the client program can easily detect the death of the server. Does anybody knows how the server detect the death of the client? The situation is like this. The client program makes a remote call to the implementation. Before the i

  • Mis preguntas de seguridad

    hola buenas tardes alguien me podria ayudar es que no me acuerdo de mis preguntas de seguridad y no puedo realizar ninguna compra, alguien sabe que puedo hacer gracias

  • Missing audio on AC3 encode

    I have a small mix that plays fine in Soundtrack Pro. When I export the mix as an AC3 file 2 of the dialogue clips are missing. When I go back to my STP mix they are still in the mix but silent. If I reassign them to a different sub mix and then back