Where is the iOS6 version of the iPad User Guide and /or guide for the new version of Maps?
Yesterday I installed iOS6 along with 4 updates one of which was the User Guide, as I recall. But my user guide till has iOS5 Maps guidance so must be the old guide. How do I download the iOS6 UserGuide and new Maps guidance? Thanks
There doesn't seem to be one for iPad yet. There is an iOS 6 guide for iPhone. They are virtually the same.
http://itunes.apple.com/us/book/iphone-user-guide-for-ios-6/id563272542?mt=11
Similar Messages
-
my PowerBook-G4 operating system software - Mac OS X 10.5.8 - does not meet minimum requirements for downloading the latest version of FireFox ... is there an UpDate to a newer version of my op.sys. software, Or, what is a better choice of an UpGrade to a newer/different op.sys. software ?
Thanx!The best maintained PowerPC browser at the moment is TenFourFox:
http://www.floodgap.com/software/tenfourfox/
It is a Mac port of a newer version of FF thatn any PowerPC Mac can support natively. It runs, looks and feel like FF.
I found some add-ons that helped TFF with speed issues. Pleae see my post in another PPC forum:
FYI: Speed-up for TenFourFox on PowerPC -
My mothers iPod dosent show her primary mail acct and asks for a password for her primary mail acct and shows her secondary acct without any label and password please help tried everything do i need to delete both accts and start over????
also the secondary acct does not show up on mailboxes just #of e-mails something is not right with this iPod should we delete the mailing accts and redo them or...... please help my mother almost threw the iPod overboard on her last overseas trip and ive tried everythin i know to do so help help help
-
I recently purchased an Iphone 4s from an electronics store. I was aware that it had been previously owned, however, I was not informed until an activation attempt that the iphone was on a contract that had defaulted, even worse, the previous owner had not completely paid for the phone. I now have a $100 paper weight with no way to activate it on any other carrier. The customer service representative who informed me of the default status and previous history also informed me that I would never be able to set up an account with Verizon, and i would have to have the iphone jailbroken to use it on anyother network. I do not wish to go that route as it is illegal, and would alter the iphone and I believe apple is supperrior and do not wish to risk altering the iphone's performance capabilities. Please help?
If it is locked to Verizon then only the original account holder can have the phone unlocked. You have wasted your money
-
I need a user manual and/or spec for the AT-MIO-16H-9 Daq board
I am interested in the precision for different input ranges for analog voltage measurment
ThanksGo to ni.com and search on "at mio 16" (no dashes). You will find an entry for the AT-MIO-16 User Manual. It has your information.
Regards,
Doug -
Ihave abouy 4-5 different user IDS and passwords that I have to juggle to get access to the Apps store. Almost every time I try to get an update, etc., I have to go through the routine of either changing both user ID and password, or just the password. I am a long-time Apple customer but have drifted as far as possible from using Apple updates and purchases. It's just not worth the time, exasperation and energy involved. I can understand that Apple doesn't want to have varied IDs wrapped into a single ID, but it would be helpful if Apple took the time to delete all but one user ID, upon the request of an Apple customer, instead of spending so much time issuing yet another iPad and iPhone. At least, have mercy on some of Apple customers who are still buying snd using laptops and desk tops. HELP!!!
I'm not sure how you came to have so many Apple IDs, but I'd suggest that you simplify things.
I just checked the "Apple ID Support" page:
http://www.apple.com/support/appleid/
as I imagine you have, too, and I find no instructions for closing or deleting an Apple ID, but you could simplify things quite a bit by using only one Apple ID on all of your devices.
It will take a bit of time, but I think you'll find that it's worth it.
If I were you, I would just delete all purchased apps (if you've purchased music, that's a whole different issue - but you could probably simplify your music purchases, too) from all devices accept one - your most "important" device - and log out from all other devices. Then log in from those other devices using your preferred Apple ID, and reinstall the apps and other stuff.
It's going to be tedious, and it'll take some time, but I think you'll have a much better experience over the long term.
For one thing, you'd always be notified automatically to update/upgrade your stuff, and your log-ins to do so would be much easier.
I know it's not good news, but I hope it helps. -
What are some features and/or apps for the hearing impaired?
I am wondering, do you guys have an app and/or feature for a MacBook Pro, iPad 3rd generation, and iPhone 5 for the hearing ampaired?
Is browse here: http://www.apple.com/accessibility/
-
DIM-00035 You have entered and invlaid option for the -EDIT command
Hi Experts,
I am creating oracle instance using oradim utility. I am using oracle 9.2 on windows 2003 server.
I have installed oracle 9.2 and created ORCL database as part of installation. Now I have deleted ORCL database using DBCA. Now I try to create a new DB instance.
I ran the below command:
c:\>oradim -NEW -SID <sidname> -SRVC OracleService<SID> -INITPWD <password> -pfile <pfilepath>
I am getting the below error:
DIM-00035 You have entered and invlaid option for the -EDIT command
Please help me why I am getting this error even though I am creating new service.
Thanks.The definition for INITPWD is:
-INTPWD password is the password for the new instance. This is the password for the user logged in with SYSDBA privileges. Option -INTPWD is not required. If you do not specify it, then operating system authentication is used, and no password is required.
The passwords for SYS and SYSTEM are created later - when the database itself is created. Nevertheless the error message is strange, there is no -EDIT option in the command. Moreover -NEW and -EDIT are mutually exclusive.
Werner -
PKI view , AIA and CDP locatiion for the RootCA has red crossover " unable to download"
I am trying to create a PKI infrastructure on winserver2008R2 enterprise as follows
offline ROOT CA---Standalone
Online Intermediate CA -- enterprise
PROBLEM:
on the intermediate CA: using enterprise PKI view , AIA and CDP locatiion for the RootCA has red crossover " unable to download"but enterprise pki view "manage AD container" indicated the AIA and CDP container
had OK for the root CA CDP and AIA.
Any help will be appreciated
INSTALLATION STEPS :
i performed the ffg on offline RootCA
create the CA policy policy file and store in windows folder
install ADCS
run post installation script
The Certificate Service was successful and saw a green icon in the console
I performed the ffg on online enterprise CA
create the CA policy policy file and store in windows folder
install ADCS
i successfully published the root CA cert and CRL in the local store and AD. i saw the ffg message upon completion
CertUtil: -addstore command completed successfully.
CertUtil: -dsPublish command completed successfully.
install ADCS
below is the output for getreg ( CRL and AIA)
C:\Users\Administrator.GORYEAL>certutil -getreg CA\CRLPublicationURLs
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CertSvc\Configuration\GINTC
A\CRLPublicationURLs:
CRLPublicationURLs REG_MULTI_SZ =
0: 65:C:\Windows\system32\CertSrv\CertEnroll\%3%8%9.crl
CSURL_SERVERPUBLISH -- 1
CSURL_SERVERPUBLISHDELTA -- 40 (64)
1: 79:ldap:///CN=%7%8,CN=%2,CN=CDP,CN=Public Key Services,CN=Services,%6%10
CSURL_SERVERPUBLISH -- 1
CSURL_ADDTOCERTCDP -- 2
CSURL_ADDTOFRESHESTCRL -- 4
CSURL_ADDTOCRLCDP -- 8
CSURL_SERVERPUBLISHDELTA -- 40 (64)
2: 0:http://%1/CertEnroll/%3%8%9.crl
3: 0:file://%1/CertEnroll/%3%8%9.crl
4: 65:file://\\www\Certdata\%3%8%9.crl
CSURL_SERVERPUBLISH -- 1
CSURL_SERVERPUBLISHDELTA -- 40 (64)
CertUtil: -getreg command completed successfully.
C:\Users\Administrator.GORYEAL>certutil -getreg CA\CACertPublicationURLs
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CertSvc\Configuration\GINTC
A\CACertPublicationURLs:
CACertPublicationURLs REG_MULTI_SZ =
0: 1:C:\Windows\system32\CertSrv\CertEnroll\%1_%3%4.crt
CSURL_SERVERPUBLISH -- 1
1: 3:ldap:///CN=%7,CN=AIA,CN=Public Key Services,CN=Services,%6%11
CSURL_SERVERPUBLISH -- 1
CSURL_ADDTOCERTCDP -- 2
2: 0:http://%1/CertEnroll/%1_%3%4.crt
3: 0:file://%1/CertEnroll/%1_%3%4.crt
CertUtil: -getreg command completed successfully.when i ran certutil -URL http://www.goryeal.com/CERTDATA/GROOTCA.crl
i saw a status message of OK
when i paste the url(http://www.goryeal.com/CERTDATA/GROOTCA.crl) from pki view in the browser i got the message:
404 - File or directory not found
But when i copy the url(http://www.goryeal.com/CERTDATA/) in the browser , i was able to see the root ca CRL :
I revoked CA exchange cert and issue a new one but still no luck. Below is the verification for the ca exchange cert:
certutil.exe -verify -urlfetch
c:\ca.cer
Issuer:
CN=GINTCA
DC=goryeal
DC=com
Subject:
CN=GINTCA-Xchg
DC=goryeal
DC=com
Cert Serial Number: 61db778400000000000b
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT (0x40000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwRevocationFreshnessTime: 6 Days, 21 Hours, 50 Minutes, 11 Seconds
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwRevocationFreshnessTime: 6 Days, 21 Hours, 50 Minutes, 11 Seconds
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=GINTCA, DC=goryeal, DC=com
NotBefore: 4/2/2014 5:00 PM
NotAfter: 4/9/2014 5:10 PM
Subject: CN=GINTCA-Xchg, DC=goryeal, DC=com
Serial: 61db778400000000000b
Template: CAExchange
Template: CA Exchange
5f c7 75 f7 e9 da 4b 96 ea 05 48 f2 2f 49 0d 96 b8 d0 f7 16
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA
Verified "Certificate (0)" Time: 0
[0.0] ldap:///CN=GINTCA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?cACertificate?base?objectClass=certificationAuthority
---------------- Certificate CDP
Verified "Base CRL (06)" Time: 0
[0.0] ldap:///CN=GINTCA,CN=INTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint
Verified "Delta CRL (06)" Time: 0
[0.0.0] ldap:///CN=GINTCA,CN=INTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?deltaRevocationList?base?objectClass=cRLDistributionPoint
---------------- Base CRL CDP
OK "Delta CRL (06)" Time: 0
[0.0] ldap:///CN=GINTCA,CN=INTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?deltaRevocationList?base?objectClass=cRLDistributionPoint
---------------- Certificate OCSP
No URLs "None" Time: 0
CRL 06:
Issuer: CN=GINTCA, DC=goryeal, DC=com
bc c0 e1 8c e1 4c 18 34 5f 06 ca c1 f2 a0 3b 4d 58 9f 27 70
Delta CRL 06:
Issuer: CN=GINTCA, DC=goryeal, DC=com
69 cf 42 09 59 48 3f 07 bf b7 8a 4c 01 a6 45 5f 13 87 da 1b
Issuance[0] = 1.2.3.4.1455.67.89.5
Application[0] = 1.3.6.1.4.1.311.21.5 Private Key Archival
CertContext[0][1]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=GROOTCA
NotBefore: 3/26/2014 8:01 PM
NotAfter: 3/20/2019 8:38 PM
Subject: CN=GINTCA, DC=goryeal, DC=com
Serial: 1297cd88000000000004
Template: SubCA
a4 96 15 fd 62 c1 1c 86 db 21 15 a7 d4 b4 0e 16 8f 03 2c de
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA
Verified "Certificate (0)" Time: 0
[0.0] ldap:///CN=GROOTCA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?cACertificate?base?objectClass=certificationAuthority
Verified "Certificate (0)" Time: 0
[1.0] http://www.goryeal.com/Certdata/ROOTCA_GROOTCA.crt
---------------- Certificate CDP
Verified "Base CRL (06)" Time: 0
[0.0] ldap:///CN=GROOTCA,CN=ROOTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint
Failed "CDP" Time: 0
Error retrieving URL: Error 0x80190194 (-2145844844)
http://www.goryeal.com/Cerdata/GROOTCA.crl
---------------- Base CRL CDP
No URLs "None" Time: 0
---------------- Certificate OCSP
No URLs "None" Time: 0
CRL 06:
Issuer: CN=GROOTCA
f7 3d fb a7 12 bf f1 b5 e9 35 b7 a1 2b 17 2a 28 29 36 c6 8a
Issuance[0] = 1.2.3.4.1455.67.89.5
CertContext[0][2]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=GROOTCA
NotBefore: 3/20/2014 8:28 PM
NotAfter: 3/20/2019 8:38 PM
Subject: CN=GROOTCA
Serial: 2157e0150f7e149e49295666612464ef
b5 a8 4c e1 64 9d b0 aa c5 e4 b7 b0 4f 5e fe e3 99 aa 61 de
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA
No URLs "None" Time: 0
---------------- Certificate CDP
No URLs "None" Time: 0
---------------- Certificate OCSP
No URLs "None" Time: 0
Issuance[0] = 1.2.3.4.1455.67.89.5
Exclude leaf cert:
e8 5b f7 0b 59 b4 84 97 87 96 1b f1 39 9b 15 14 24 84 d0 77
Full chain:
ca 29 87 01 d8 6f e6 28 d7 16 a9 5c 81 74 d3 b8 1e c9 44 53
Verified Issuance Policies:
1.2.3.4.1455.67.89.5
Verified Application Policies:
1.3.6.1.4.1.311.21.5 Private Key Archival
Leaf certificate revocation check passed
CertUtil: -verify command completed successfully. -
Where do I get the serial number and product key for the version of AutoCAD LT for Mac that I bought from the ITunes store?
The iTunes Store doesn't sell software for the Mac. I presume you mean the Mac App Store. To the best of my knowledge, no software sold in the Mac App Store has serial numbers nor product keys. For what reason do you think you need them?
Regards. -
I have downloaded the latest version of itunes to my computer and when I sync my new iphone, it says it is syncing but doe not pull the music in my library. Can anyone assist me in figuring out how to sync my iphone? The computer that has my current music library is old so I want to get it synced before it dies...
Download what applications?
Apps in iTunes do not run on computers.
What is the exact error and where specifically is it occurring? -
Error message when opening itunes...The itunes library.itl cannot be read because it was created in a newer version of itunes... how do i fix, it will not open with any of my ipod, ipad, iphone.
I don't know why this error occurs, unless you have attempted to downgrade iTunes.
This method should get you up and running again.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I sold my ipod (which has always been backed up to itunes/computer) and am waiting for a new Ipad.
Do I have to manually download all my apps on the ipad, or will itunes allow me to sync my old ipod apps and music to the ipad?Welcome to the Apple Community.
You can sync your music and apps from iTunes. However since you are moving from an iPod to an iPad, many of the apps will have iPad versions which you will need to redownload. -
[svn] 1011: Change for supporting newer version of the concurrent library.
Revision: 1011
Author: [email protected]
Date: 2008-03-28 16:42:52 -0700 (Fri, 28 Mar 2008)
Log Message:
Change for supporting newer version of the concurrent library. When you remove, you need to
provide the return value from the schedule method, not the arg you passed in. The api is
a litte awkward in this regard in that the return value is not a Runnable but the remove
method expects a Runnable so this code is a little defensive to be sure no one is using
a version of the code where the return value is not a runnable.
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/util/TimeoutManager.java...It was so bad my English?
-
I've updated my Ipad to IOS 7,0, the problem I'm is the Ipad has been updating Icloud settings for the past two days and it's not allowing me to do anything else. How do I cancel the Icloud update?......HELP
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download -
iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.
- it's all said in the title. I can't understand why the developers turn things bad ... risking loosing Apples valuable customers.
More examples needed? (check out the communities and the reviews)
- OSX: Maverick to Yosemite = not recommended (check it out > http://roaringapps.com/apps)
- iPad: older versions as iPad2 should not upgrade to iOS7/8 (it's not supporting its hardware accordingly, it's designed for the latest hardware)
- iTunes (it's possible to rollback to 10.7 - 11.4, but you need to breech OSX system security framework)
- Pages (was a real alternative for many of us, each update reduced features and created incompatibility to older work files)
The list could easily extend to ...You can offer Apple feedback here: http://www.apple.com/feedback/
as for "
"@Apple, I want a $100 gift card for the inconvenience"
dream on.
Maybe you are looking for
-
Exchange 2007 on mac mail on MacOSX 10.6.2 crashes
Hi Please help me to resolve this issue as many time the application crashes. Unable to figure out the real cause. Please help Process: Mail [178] Path: /Applications/Mail.app/Contents/MacOS/Mail Identifier: com.apple.mail Version: 4.2 (1077) Build I
-
Exported PDF is Blank (branched, formerly Re: InDesign CS6 Export to PDF has missing objects)
Just recently went from CS5.5 to CS6 and now when I export files in InDesign to pdf they open and are totally blank. What am I doing wrong?
-
Where-used list for hierarchies in queries
Hi all, has anybody an idea, how to find out, in which queries an external hierarchy is used? (BW 3.5) Thanks in advance! Regards, Carsten Bucken
-
Sync Linked Clips in Premiere Elements 11, 10, and 9.0/9.0.1
Has anyone gotten the "Sync Linked Clips" feature to work in either Premiere Elements 9, 10, or 11 Windows? I am using Windows 7 64 bit, and that feature stops working for me when I go to versions 9.0/9.0.1, 10, and 11. It works great in Premiere Ele
-
Querying a complexe XML column
Does anybody know how to query the table nf_xmlt (id number not null, xml_nucleo xmltype) whose column xml_nucleo contains <dati xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns=""> <codiceinterno/> <codicefiscaleassistito>CRBJNF92S70G628L