Where is the log of communication channel

I use a file adapter to write files into a directory, but I found some files are disappear. I use SXMB_MONI to check, there is no error. And I use runtime workbench to check the log, it only shows the log in 1hr. Could I see the entire file adapter log ?

Hi
Use visual administrator by which we can administer the J2EE engine of XI such as all j2ee based adapters which run as services on the j2ee engine
http://help.sap.com/saphelp_nw70/helpdata/en/39/83682615cd4f8197d0612529f2165f/frameset.htm
XI: NetWeaver Administrator - first look - Logs & Traces
/people/michal.krawczyk2/blog/2005/05/27/xi-netweaver-administrator--first-look--logs-traces

Similar Messages

  • Log in communication channel

    Hi all,
    I work in Pi 7.0 SP18, and in have a question about log of communication chanel.
    In fact, When I restart the PI system, I don't have any more Log in communication channel or never more than 1 hour.
    I would like to know if it were possible to configure the parameter of CC log in visual admin or config tool for exmple to have more history about CC
    Thanks by advance
    NG

    Hello NG
    It is not possible to change the features of the Communication Channel Monitor. If you need to see the log information you can check the following xi logs:
    1) defaultTrace.trc
    2) applications.log
    3) xi.log
    Check the link below, which gives an explanation of the Communication Channel Monitor.
    Communication Channel Monitor 
    http://help.sap.com/saphelp_nw70/helpdata/en/44/2a1a8620323f0ee10000000a114a6b/frameset.htm
    Regards
    Mark

  • Strange behavior of email notification: where is the log?

    Hi,
    The email notifications have a strange behavior in our productive system. When the system process whatever subscription only the firsts four notification are sent by email even thought  all the inbox notifications are sent. I checked the mail server and only four smtp connections are sent..... In the development system it is working well, I mean all the emails are sent using the same mail server....  I marked the option Enable session debug info in the EMAIL channel but I see nothing in the los (default.trc).
    Is there any log to check what it is happened? Where is the log of session debug info?
    Thanks
    Antonio

    Thanks for you fast replay.
    I would like to increase the logging of Notificator (com.sapportals.wcm.service.notificator.wcm) to DEBUG  but in NW7 SP13 I do not find that logging locations.
    Could you give any hit on it?
    thanks
    Antonio
    By the way... I found  the following warning:
    JMX connector exception occurred while processing external JMX request [ JMX request (java) v1.0 len: 314 |  src: cluster target-node: 8573000 req: invoke params-number: 4 params-bytes: 0 | :name=com.sap.portal.prt.bridge.service.mbeans.PRTMBeanRuntime,j2eeType=PRTBridge_JMX_SECTION,SAP_J2EEClusterNode=8573000,SAP_J2EECluster=""... [see details]

  • Error in the SOAP   Receiver communication channel

    Hi ,
            My scenario is RFC - to -SOAP (synchronous )   i have  specified the TARGET URL inthe   SOAP receiver  comminication chanel.. but  while testing  the interface   by providing the test  data from R/3 ..  I'm not getting any Respose.. ..
    If I check in the SXMB_MONI in  i'm getting the following message ..  but the URL whicjh i provided that is fine.. but my doubt  is  through XI  may be it's  not able to connect the  Target System... .. so, please suggest me...
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: www.webservicex.net</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    regards
    Jain

    By default, the SOAP adapter sends the SOAP message with the content type text/xml.
    When you check "Do not use SOAP envelope", the default contnet type is application/xml.
    You can change the content type like this: Go to the SOAP receiver communication channel module tab. Add the module "localejbs/AF_Modules/MessageTransformBean" before the standard module. Add the parameter name Transform.ContentType and value text/xml.
    Check out this
    /people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
    One way of testing ur scenario
    /people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
    Also have a look here
    SAP Note 856597
    reward points if solution found helpfull
    regards
    chandrakanth

  • JMS ReplyTo Queue Name parameter in the receiver JMS communication channel

    Hi All,
    Can any please explain the use of JMS ReplyTo Queue Name parameter in the receiver JMS communication channel?
    Thanks
    Karthik.

    Hi karthik,
    JMS ReplyTo Queue Name parameter  is used for Specify the name of the queue to which the responses are to be sent.
    Thanks
    Govind.

  • Where is the log in item tab? i cant find it !

    where is the log in item tab?? i cant find it.cant install my itunes helper without going through it .urgent .need an answer as fat as possible .

    As of CC 2014 the filter no longer exists. Several features were removed, some had to with flash as Adobe is supporting html5 over flash. It can still be used in CS6 and CC

  • In repository what is the use of communication channel templates

    Hi People
                     what is the use of communication channel templates in integration repository? and  when we are using that please tell me the ASAP
    Thanks & Regards
    shekar

    HI,
    The communication channel template is for the documentation purpose that will give the information about the sender and receiver communication channels in IR. So No need to goto ID and check the related CCs each time for every scenario.
    You can preconfigure a communication channel with a communication channel template. You can use the communication channel template as a template to define a communication channel at configuration time.
    If you want to create multiple communication channels with some identical configuration data, you should use a communication channel template.
    Thanks
    Swarup

  • Where is the log in 7.6.4?

    Hi there. 
    I need to troubleshoot my Airport Extreme.  Version 7.6.4 of Airport Utility.  It's been dropping and renegotiating about twice a day over the past week or so. 
    Any advice appreciated.
    Cheers

    7.6.4 is a version of firmware for the Gen1-5 version AE and Express.
    The utility version is totally unrelated and is either v6 in all versions since Lion or v5 prior to that or windows.
    You login by opening the airport utility. If the airport utility cannot find the airport extreme that is because you have Yosemite.. that all round bug heaven.
    You can get access albeit briefly by rebooting (ie turn off and on again) the AE. Or reboot the whole network in correct order.. restart modem.. AE then clients with about 2 min between them.. And then you might get access to the the AE for a good 5min before it disappears off the planet again.
    Where is the log in 7.6.4?'
    Simple .. it is still there but you cannot see it because you are running Yosemite.. and therefore v6 utility..
    There is no logging for any version of Lion, and later with v6 utility.. you need an older computer or one with windows.. to run 5.6 utility.
    Or do a google search for how to install v5 utility.. as I will get my post deleted by telling you.
    Also the log is extremely unhelpful even when you do get to it. And so is 7.6.4 for stability.
    My recommendation .. if you have an extreme.. express once upgraded cannot be downgraded.. and is not as susceptible to problems.
    Please reduce your firmware to 7.6.1 as it is much better for stability.
    Downgrade by holding down the option key while clicking the version number.

  • Can't find the adapters in communication channel

    Hi
    I can't find the adapters in communication channel , on hunting the sdn i could find the below soln :
    To rectify this you must import the BASIS SWCV 7.0 into the Integration repository.
    can any body give me step by step for importing in the integration repository.
    rgds
    shazia

    Hi,
    First do SLDCHECK in XI ABAP Stack, then if it has errors means follow this help file
    http://help.sap.com/saphelp_nw04s/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
    If SLDCHECK is working fine means,
    Try to re-import the BASIS SWC into IR againg, then only you will be able to see the list of adapters in the list..
    Regards
    Seshagiri

  • Where are the logs in iAS ( 9.0.4.x.x )

    Hi
    I have an installation of iAS ( 9.0.4.x.x ) on windows. Now, I am getting a trouble with the disk space because where the iAS is located is being filling for log files and I do not find where are the logs that has more capacity. The disk is getting full.
    Thanks for the information
    Joel Pèrez

    Hi,
    You should be able to find this information in chapter 4 (Managing Log Files) in the 9.0.4 admin guide at http://download-west.oracle.com/docs/cd/B10464_05/core.904/b10376/log.htm#i1011108.
    Table 4-1 lists the log file locations for each component.
    Regards,
    Mathias

  • Where does the logging in RDBMSRealm go  --and-- are some JavaDocs missing?

    I see that a LogOutputStream is created in the example
    class RDBMSRealm, but where do all of the log
    statements go. The LogOutputStream is created as:
    log = new LogOutputStream("RDBMSRealm");
    but I do not see and file called RDBMSRealm and/or
    I do not see the log statements on stdout.
    BTW, I do have logging set to the most detailed
    level (Info) from the console if this matters.
    Also, are there some JavaDocs missing from
    Weblogic's Reference website at
    http://edocs.bea.com/wls/docs60/javadocs/index.html
    LogOutputStream is an example. I do not see the
    class when I select the package
    weblogic.logging.
    Where is it?
    Much Thanks
    Bill Ralenkotter.

    Thanks Terry,
    Sorry, I should have mentioned that I am using WL6.0.
    Does anyone know what I need to do to get the RDBMS Realm log to start on
    WL6.0.
    About the missing JavaDocs: Also, if I am doing development using these
    classes I still do not
    understand why they are not on the 6.0 refernce site!
    About the missing JavaDocs,
    I see java docs for a lot of classes, but what document do I use that
    helps me to understand the entire framework? The Programming
    Weblogic Security does give this information.
    Example question: how do I get a reference to the realm to create
    users? Should I even be doing this?
    Thanks for your help.
    Bill.
    "THorner" <[email protected]> wrote in message
    news:B4D7B3CBF165D311844100C04F4E3E1B031246@DANCERACE01...
    If you are using WLS5.1 you much set the property
    weblogic.security.realm.debug=true
    then this information will be sent to stdout. This is set to false by
    default, as there is a lot of information, and it is a big performance
    hit.
    I think weblogic likes to avoid some of its APIs being public, which is
    annoying at times, but probably reasonable
    terry
    -----Original Message-----
    From: Bill Ralenkotter [mailto:[email protected]]
    Posted At: Thu 03 May 2001 16:00
    Posted To: weblogic.developer.interest.security
    Conversation: Where does the logging in RDBMSRealm go and are some
    JavaDocs missing?
    Subject: Where does the logging in RDBMSRealm go and are some
    JavaDocs missing?
    I see that a LogOutputStream is created in the example
    class RDBMSRealm, but where do all of the log
    statements go. The LogOutputStream is created as:
    log = new LogOutputStream("RDBMSRealm");
    but I do not see and file called RDBMSRealm and/or
    I do not see the log statements on stdout.
    BTW, I do have logging set to the most detailed
    level (Info) from the console if this matters.
    Also, are there some JavaDocs missing from
    Weblogic's Reference website at
    http://edocs.bea.com/wls/docs60/javadocs/index.html
    LogOutputStream is an example. I do not see the
    class when I select the package
    weblogic.logging.
    Where is it?
    Much Thanks
    Bill Ralenkotter.

  • Xcode 3 - Where's the Log window?

    In Xcode 2 NSLog()Used to print text to a log panel. Now it doesn't. Where is the log window? I can't find it and a search of the help files doesn't produce any results. Also I can't find any menu item that would help. Generally I'm very confused by the big changes in the Xcode and Interface Builder GUIs. Most of the programming examples in my books are now FUBAR. Also the bookmarks in my browser to the Cocoa documentation are now invalid. What a bummer.

    Well, it's an all-new application, it can be disturbing indeed.
    However, your log window still exists, and its name never changed, it's called Console.
    So, look into the preferences --> Debugging, look at the "On start" local menu, select "Show console", when you'll build and go your App the console window will appear and display your logs.

  • What is the need of communication channel?

    what is the need of communication channel in xi?

    Hi,
    In communication Channel, we have the identification of a system in which we are going to login.
    for sending the data or for receiving the data.
    the details of authantication is also in the same.
    This is required for making right connections with the system (3rd party or SAP) for data communication purpose.
    Sandeep

  • Audit log in communication channel monitoring(MDT)

    Hi,
    I am doing a soap lookup in my message mapping for an interface.In order to monitor the request and response communication , I am unable to see the 'Audit Log' for the soap communication channel that was configured for the same.On clicking the message id for viewing the audit log,an error page is displayed as "Requested Page not found"
    Could you please help me as to why I am unable to see the Audit Log.
    Regards
    Janice

    Hi! Janice,
    Could you guide me as to where I can set the parameter for sync logging in AE
    You can got to
    1)  T Code: SXMB_ADM
    2)  Click Integration Engine Configuration        
    3)  Again  click Configuration
    4)  Now Keep the parameter as TRACE_LEVEL   = 3 instead of 0 or 1 or 2.
    then again go to SXMB_MONI there you can view now SOAP Request and Response.
    I hope now it is resolved right
    Regards
    Amar Srinivas Eli

  • Error during the configuration of communication channel

    Hi ,
    I am trying to create a senario where XI will send the DEBMAS Idocs to the SAP system.
    Can you please help me as to how sould i go about configuring this senarion.
    The error i am getting is -
    Communication channel is not configured correctly. Choose a different communication channel----- when i am trying to assign the communication channel to the receiver.
    Thanks for the help
    Nikhil

    Hi,
    1. at first you can take a look at:
    http://server:port/mdt/amtServlet
    find you channnel type and your channel and see if there's any error over there
    2.tell us all of the channel parameters that you've configured so far
    Regards,
    michal

Maybe you are looking for

  • SRSS 4.2 readMessage::socket looping limited exceeded

    I have 1 user out of 45 Sun Rays that keeps getting rebooted. The Sun Ray session terminates, the /var/opt/SUNWut/log/messages says: sunray-servers utauthd: [ID XXXXXX user.info] Worker1 NOTICE: readMessage::socket looping limit exceeded. Close it. T

  • Dreaded Apple logo and spinning circle.

    I have the 20 inch I mac and I am running leopard. Last night although my mac is on a power bar we did have a few power surges. Now this morning all i get is the logo and spinning circle I have checked the ram it all seems good tried it without no lu

  • Mass change documents in Inbox

    Hi All, Is it possible to Mass "Complete" of Mass change of "Status" for the documents in the Inbox. Search all the documents based on the Prioirty is high and Choose all the documents at once and change the status to Inprocess. Felt such feature sho

  • Communication channel name in message mapping ?!

    Hi, I have the problem that I have to know the sender channel name in a message mapping. The reason is, that I have to set a flag if the message comes via one sender channel. Of course a solution would be to use differnt Services but I won't do that.

  • Client insert option grey ?? possible?

    Dear All, I do not know its possible or not ..We are trying to do this just to make user friendly environment. I know how to make any client default client through setting in profile parameter - login/system_client ... but can we make client box grey