Where is the Moderator of the Forum?!

While opening forum to review the questions I was shocked with Spams sent over OTN forum. Where is the Moderator of the Forum and Who will delete all these spams and WHEN??
Additionaly these type of messages were posted under this topic too!
http://img515.imageshack.us/img515/4935/whereismoderator.jpg
http://img20.imageshack.us/img20/2251/whereismoderator2.jpg

N. Gasparotto wrote:
BluShadow wrote:
Of course, if enough peoplel hit the "report abuse" button on the offending posts then the system is supposed to automatically remove them.Don't know if it is removed automatically, but looks not fair for at least two reasons :
1. some forums are very less used than "Database General" and "SQL & PL/SQL" forums, consequently spams remain for a while, do not say forever.
2. why trust "enough people" to say a post is an abuse ? should I say "enough people" does not mean different people ?I wasn't saying this was the only way to report spam, but just pointing out that the forum does do this (according to what Justin told us a while back).
I agree that some will remain longer than others on less active forums.
Rather than just complain about lack of moderators ..., why not hit the "report abuse" button and get rid of them that way.Again, it is not fair, especialy when there are dozen of spams. Time consumming, and annoying stuff. Unless we are able to mark member as spammer.
I would second Karam, the world does not stop during the week-end, and Oracle is responsible for what is happening on OTN forums on the week-ends or as well as the week days.No, the world doesn't stop, but the thread came across quite agressively as a complaint about the lack of moderators. We do have to remember that this is a freely provided forum and Oracle does not actively moderate it 24/7 as a paid support line.
Terms of Use. Point 10:
>
10. Monitoring
Oracle has no obligation to monitor the Site or screen Content that is Shared on or through the Site. However, Oracle reserves the right to review the Site and Content and to monitor all use of and activity on the Site, and to remove or choose not to make available on or through the Site any Content at its sole discretion.

Similar Messages

Reporting Posts to the Moderator

There are several occasions that may warrant the need to report a post to the moderator, for either editing or removal. It is important that all forum users know how to do this. We all are prone to spelling mistakes, uploading incorrect files, or accidentally posting before we’re ready. Additionally, sometimes another user may post inappropriate or offensive content. In these situations, it is very important to flag the posts as soon as you see them, as that type of behavior is not tolerated on our boards.
In order to report something to the forum moderator, you will need to take the following steps:
In the upper right hand corner of each post, there is an Optionsdrop-down menu. Clicking on it will expand a list of actions you can take. Near the bottom is the option “Report to a Moderator."
Opting to report a post to the moderator will redirect you to the following page:
Here, you will need to write an explanation of why you are reporting this particular post. This is a very important step because without any reasoning behind your request, the moderator does not have justification for performing and actions.
If the post requires editing – perhaps some confidential information needs to be removed – please indicate what changes you would like to be made here.
If the post needs to be removed – most commonly, this happens when the post is abusive – please indicate your reason for flagging it (for example, “SPAM!”).
Once you click Notify Moderator, an email with the request will be sent to the moderator. The issue is typically addressed within a business day, if action is warranted.
Please keep in mind that we are not keen on removing posts because “the issue was solved” or because assistance is no longer needed. These threads are public collaborative spaces and even if you no longer need the answer to the posted question, someone else may benefit from it. Therefore, we strive to avoid removing threads that contain potentially useful information related to NI Products.
We will remove accidental duplicate posts. We will remove spam, abusive messages, and confidential files/personal information.
Thanks for reading, and have a great day!
Stephanie R.
National Instruments

Hi,
Assign the following auth-object to the user
    S_RS_ALVL <OBJ> Planning: Aggregation Level
            ACTVT      <FLD> Activity
                03
                23
            RSALVLOBJ <FLD> Aggregation Level Subobject
                DATA
                DEFINITION
            RSINFOAREA <FLD> InfoArea
            RSPLSALVL <FLD> Planning: Aggregation Level
thanks

By mistake I uninstalled my Acrobat someting, which gave me the opportunity to print .pdf and color-mark text. My licence key is [removed by moderator]. What is the name of the product? Where is the link for download and reinstall? Please help me r

By mistake I uninstalled my Acrobat someting, which gave me the opportunity to print .pdf and color-mark text. My licence key is [removed by moderator - never disclose publicly]. What is the name of the product? Where is the link for download and reinstall? Please help me rapidly, Best regards / Stefan

Sign in to your Adobe account online and look in the Plans/Products sections to see which program it might have been.

Why don't we have a moderator on the BPM forum?

To take care of posts like /thread/627745 [original link is broken], joined recently, with 3 posts on one single thread, all spitting venom.
Isn't there anyone out there who can nudge him?
Regards
Ravi
Message was edited by:
Ravi Dixit

I totally agree with both of you. The moderator's service would be invaluable to ensure the participants adhere to the forum guidelines.
>
> I couldn't read the post anymore as it was already
> deleted, ....
I found posts from that user to be offensive and Mark acted on it pretty quickly! Thanks once again, Mark!
I think, we need to ask around and see who among the active participants would be coming forward to take this up....Marilyn, are you listening?
Regards
Ravi

Where is the 'Search Acrobat Windows Forum' button?

I've largely dropped out of this forum since it changed format (no particular reason, I can see the improvements, but it just seemed to take a bit more time to review and do things), so maybe I'm being dense with my subject line? The first thing I usually want to do when I enter a forum is search for a topic that may answer my question already, but all I see are options to search Adobe globally (no thanks) or all forums (no, I'm in the Acrobat forum because I have an Acrobat question). Once I've returned a list that uselessly includes all forums I get a new Search bar and a dropdown list of Adobe applications, so then I can narrow it down, but I've already used my daily allocation of mouse clicks and am losing interest. Am I missing something?

Bon dias,
You are at "top" of Acrobat Windows Forum.
Enter a string in the Search field.
Click the button at the right.
Wait a moment.
Search returns are presented from all Forums.
Click "More options" (under Search for: <you query string>
Observe the "Where" List.
Select Acrobat Windows (nested under Acrobat) - this is the third line item from the top.
If desired - provide a "When" &/or a "Who" filter.
Click the Search button again.
Search Results are listed for your query string from the Acrobat Windows Forum.
Retain the list by opening a new Tab in your browser when viewing a result.
Review the Search Tips to learn more about what is available with this particular search engine.
While search engines share many features in common, often they do no process the feature exactly the same.
In sum - rather adequate search of specific forums is available.
We might natter about the user interface but for most queries, the forum search is adequate.
Be well...

Where are all the topics in this forum?

Where are all the topics in this forum? there should be like
1762 topics in the forum. But there are only 4 topic pages in this
forum.

Hi,
As an HPCI I found the old ITRC forum very useful.
Most of the useful topics and content do not seem to
be included in this new forum.
Will this be rectified...?
Regards,
Steve.B.

Hi everyone, not sure if this is the right forum to ask this question, however any redirect is appreciated. Where can I get the download for the latest old mozilla browser. The one with the dinosaur icon before the browser turned firefox. Thanks, Jen

Hi everyone
Not sure if this is the right forum to ask this question, however any redirect is appreciated. Where can I get the download for the latest old mozilla browser. The one with the dinosaur icon before the browser turned firefox. Thanks, Jen

Phoenix and Firebird were what Firefox was called before Firefox was settled on in 2004, and both used "birds" as the logo. IIRC, the dinosaur was used in the Mozilla Suite.
Here are the earliest versions of the Mozilla Suite. <br />
http://ftp.mozilla.org/pub/mozilla.org/mozilla/releases/
I hope this request for a historical purposes of where Mozilla came from, because those old versions aren't safe to use on the internet any longer.

Where are the Agile PLM discussion forums?

I'm looking for the Agile PLM discussion forums. I see the odd post in a variety of non-related forums, but do not see any listed that are specific to Agile PLM.

It seems there is no forum with that name or specific area.
As PLM is part of the big Apps family, we might focus in on EBS category of fourms:
https://forums.oracle.com/forums/category.jspa?categoryID=3
One of the Supply chain forums possibly, but from a quick search I'd say posts/discussions exist in {forum:id=475}.

Where's the moderator?

We need the FAQ put up the top in the sticky area (as already requested) and also ACR 5.4 is out!

athegn wrote:
I also see that the FAQ is slipping down the posts?
Nope. Click on the Overview tab.

Censorship on Adobe ColdFusion forums - Open letter to the management of the Adobe ColdFusion forums

This is reproduced from its original location at http://cfmlblog.adamcameron.me/2013/06/censorship-on-adobe-coldfusion-forums.html; it is also posted on the relevant ColdFusion forum. Apologies for the cross-post, but the two forums have different membership, and I think it's relevant to both.
Open letter to the management of the Adobe ColdFusion forums
(I do not know how to contact you, but I will try to find out and send this to you directly as well, as a courtesy).
Hi.
I am a veteran user of your ColdFusion support forums. Over the last decade or so I have been visiting the site daily (indeed several times a day: I get notified when any post is made on any of your ColdFusion-centric forums), and answering as many of people's questions as I can. For the last few years it's been via the web UI so you can go check my participation, but prior to that I was using the forums via NNTP, and my participation during that period is less easy to quantify, but it's to the tune of a few thousand posts / answers to people's questions. I consider myself an asset to the forums, and the ColdFusion community. I mean this just as "for the record", rather than any attempt to inflate any sense of my worth.
However as of today - unless you take remedial action as I will go on to detail - I will be surrendering my membership of your forums, and ceasing all attempts to assist people there.
Why am I considering doing this? Well firstly I will reproduce a thread from your forums, then I will discuss it. Where possibly the quoted material below is as it was initially posted, and if it's not exactly as originally presented, this is an accident on my part. I have highlighted some points I wish to discuss with you, simply for ease of cross-reference.
I have confirmed with Jason Dean (12Robots) that is happy for me to quote him here. I did not attempt to contact the other participant: "grazan".
Below is a chronological reproduction of the thread (in its original form, anyhow):
cold fusion 9 500 Internal server error.
created by grazan
all of a sudden none of our cfm web pages work on a windows 8 server running iis 7 .... the
server shows no errors in the event viewer .... occasionally functionality comes back w/o doing
anything ...... cold fusion did have all the hotfixes updated a few months ago but i cant get to
the admin page to give what the version is
thxs
created by 12Robots
First, ColdFusion is one word.
Second, what is a WIndows 8 server?
Third, and most important, you have provided ZERO detail. We can't help you if you don't provide something other than "none of our cfm web pages work". ColdFusion has logs (<coldfusionDir>/logs) JRun has logs (<coldfusionDir>/runtime/logs). Even if the Windows event viewer shows nothing, there should be info in those log files about what is going on.
Good luck,
Jason
created by grazan
YOU KNOW JASON YOUR A FRICKING IDIOT ......
I DIDNT REALIZE THIS WAS A GRAMMATICALLY CORREDCT FORUM ...
THANKS FOR NO HELP
created by 12Robots
*you're
jason
created by Adam Cameron
Hahahahaha. Nice.
Adam
created by Adam Cameron
Well if you got over your misplaced indignation for a moment, let's see:
ColdFusion is what people will google for, so in the spirit of helping others who might have the same question as you later on, spelling it right will help the community.
Jason's observation that you give us absolutely nothing to go on so it's basically impossible to help you is a fairly poignant observation, right? You do want help? Right, so here's some suggestions:
Articulate your issue clearly, with sufficient detail that we can help you. Read this:
http://www.catb.org/esr/faqs/smartquestions.html
Secondly... being rude to someone like Jason who really is one of the most helpful people on
these forums is a pretty stupid idea. And just serves to make you look a bit of a dick. Esp. with the caps lock on.
But anyway, let's call that a false start. Give us the details of your issue, and we'll try to help.
Cheers.
Adam
At this point, the moderator started redacting earlier messages, as detailed below:
Redacted version of earlier message:
created by 12Robots
First, [Jason, please see forum guidelines]
[rest of message as above]
Redacted version of earlier message:
created by grazan
[please see forum guidelines]
Redacted version of earlier message:
created by Adam Cameron
Entire message redacted
Redacted version of earlier message:
created by Adam Cameron
[unnecessary comments removed - Adam please see forum guidelines]
Give us the details of your issue, and we'll try to help.
Cheers.
Adam
And now back to the live thread:
created by 12Robots
Forum admin,
You censored the comment "ColdFusion is one word"? Seriously?
I didn't realize that suggesting that someone spell the name of the product correctly was against the forum guidelines. I guess I could go look it up, but I will just unsubscribe and help out at Stack Overflow instead.
Good luck,
Jason
created by Adam Cameron
Please see how much I used to help out on these forums.
I'm outa here, but not before I complain about your dictatorial behaviour.
Censorial nazi idiot.
[The entire message above has now been redacted].
That's the end of the relevant part of the thread.
Clearly I wish to speak to you about this censorship your moderator is choosing to undertake.
Firstly, let me say that I understand the perception that forums require moderation. Personally I think this position is of dubious merit, but so be it: it's a common practice. And I generally understand when I see things that have been moderated, or when a moderator step in and advises that they consider someone's wording contravenes forum guideline. I understand all this.
However.
I think the behaviour of your moderator in this situation is unacceptable. Let me elaborate.
Firstly, The highlighted comment of Jason's was removed. This comment stated - correctly - that the correct spelling of ColdFusion is as one word, as per his guidance. This comment was censored/redacted by your moderator. For the life of me, applying my most "socially modest" mindset, I cannot see what was wrong with Jason's comment, and why it needed any follow-up on any description. It was accurate advice.
The original poster's response to Jason was indeed a bit gratuitous, but - really - so what? No-one is taking offence here, and there's nothing anyone reasonable could take offence at. The person is just being a bit childish in their response. And, I hasten to add, at their own expense, I think. I see not reason to have redacted what they said.
We now come to my responses. One entire response I made was redacted (I've only just noticed this, whilst proofreading this letter). A number of tracts was redacted from my own initial post on the thread. Here I was simply explaining why Jason said what he did, and why it's good advice. And it was good advice. Your moderator here has removed both good advice, and an explanation as to why it was good advice. Again, I cannot fathom why your moderator has done this.
Following on from this I back-up Jason's assertion that the original post was inadequate on detail for us to help. This too is accurate. I reiterated this to try to make the origial poster see that Jason wasn't simply being unhelpful - to the contrary - pointing out we need more information before we can help is very good initial advice here. Advice that has now been deleted.
Next is some slightly contentious wording on my part, I suppose... at least if one doesn't actually read what I say, instead simply zooming in on one word and assessing it out of context. I pointed out that being abusive and writing in all-caps is unnecessary, and makes the person look like a dick. Note I didn't say the person was a dick (that would be abuse... very mild though), I was saying that given the behaviour the person was engaging in, they could be perceived that way. Which is... accurate. And saying someone is a dick and suggesting they could be perceived as a dick are two different things. One is ad hominem attack (bad), one is simply an observation / guidance (not bad).
At this point Jason drew my attention to this censorship going on. And this is another thing that I think is inappropriate on the part of the moderator. I have little problem with them thinking that content on this thread needs censorship (whilst they are wrong, they are entitled to their opinion), to silently and anonymously redact people's posts is an inappropriate - and to be frank cowardly - handling of this situation. If the moderator has an issue with something written on the forums, the courteous and professional thing to do would be to advise the participants that they have overstepped. This would give us a chance to remediate the situation, or to simply disagree. Simply excising someone's work - because this is volunteer work we are engaging in here - is unacceptable.
If anything ought to have been censored from the thread it was my last comment. Whilst it was accurate, I did use harsh sentiment, I accept this. However in the given situation, I don't think I have been the most out-of-line participant in proceedings.
I would like you to remediate this situation, and here is how I would like you to do it.
Restore Jason's original post. There was no reason to censor it.
Restore grazan's all-caps post. It was doing no harm.
Restore my second post (not the one laughing at Jason's joke, the longer one I discuss above). Again, useful and accurate information was removed from this post, and there was simply no reason to have had done so.
You can leave my last comment redacted. Fair enough. Whilst I stand by what I said, it is unhelpful in the context of the thread.
I also want the moderator to be censured, and I would like them to apologise for their behaviour, by posting on that thread explaining that they understand their behaviour was inappropriate and unacceptable.
If they are a community volunteer, they should be dismissed from their position. They are clearly not capable of fulfilling this role in a professional, well-balanced manner.
If they are an Adobe staff person, then the censure will have to be sufficient, although I think they should be relieved from their duties as a forum moderator, as they are not up to the task at hand.
Talk to your other moderators and advise them they need to act with a sense of balance and professionalism when moderating the forums.
In return, I will continue my participation on the forums, and continue to help the ColdFusion community members where I can, in the spirit of goodwill and co-operation. I will also try to convince Jason to do the same.
If you cannot see right to resolve this situation appropriate, I will surrender my membership of the forums and cease helping your community.
You can reply to me either via a comment against this post, or via email ([email protected]). That said, see the caveats in my communications policy: I reserve the right to publish any communications on this topic as I see fit (within the bounds of common sense).
Thanks for your time.
Adam Cameron

Adam,
Comments from a kindred spirit...
I suggest you take a breather and go do something else for a few days or weeks. Don't stomp your feet and say "I'm done for good, I won't be back", because like it or not, some of the reason you're here is to benefit YOU, and if you do go cold turkey you'll miss that benefit.
In other words, "never say never".
Like you, I have been extremely frustrated by the running of the forum from time to time as well. Sometimes it's the quality of the forum software, sometimes it's the mix of other immature people who comment, sometimes it's just me. Usually it's not the moderation or actual running of the forum, but I do understand where you're coming from.
I have benefited greatly on several occasions just by taking a vacation from forum participation.
We all have to understand two things:
1. We're able to communicate here by the good graces of Adobe, who are first and foremost a business, trying to achieve their business goals. They'd rather not upset all the idiots, because unfortunately idiots have money to spend too.
2. Nobody's perfect.
I'm not sure about the specifics, but the moderators are generally also volunteers. See item 2 above.
Hope you don't choose to stop contributing to the community, as no matter what, your contribution is good for the world.
-Noel

Can't see who has replied to the thread in the forum, its pointess?

What's the point in creating a system where you can't see who has replied to the thread? Its absolutely F**CKING pointless? Does anyone at Adobe have any brains or are they all sitting with their heads up their backsides?
Surely before you release such garbage you test for these very simple issues, right?
osgood_(NOT M Golding) If anyone at Adobe is monitoring this please get my screen named changed to what it was previously as well.

It needs a 'latest reply' on the posted list page like the old version otherwise you have no idea if anyone has replied to the post or not without opening it.
Latest reply: May 3, 2014 2:17 AM by . osgood_
The line below is not that necessary in the order of priority, which for all intense and purposes is quite useless. I don't really care about how long ago something was posted or where it was posted but an indication to show 'updated' posts and by who is vital.
9 minutes ago in Dreamweaver support forum
Why do we even need 'Dreamweaver support forum'. We already know that's where we are! I guess a selection of posts from other forums may appear in a 'general' postings list somewhere, but who really cares - if I'm asking a question related to DW that's the forum I'm going to, not a general list as I don't care a monkey knackers what's been posted in Fireworks or InDesign or Illustrator. If I did I'd go to those forums.
If you are tracking several postings it is going to become hugely annoying for both the person who has asked the question and the people helping the original poster as many replies will potentially go unnoticed and not resolved.
And what's with the silly horizontal scroll bar being created for long lines of text? That's annoying too.
Plenty of teething issue you need to get your head around over the next few weeks.

Where do I read in the documentation the list of the system properties?

Yep. Sounds stupid. But it's true. I read in all these forums where and how to set the truststore and so on but it would be beautiful to understand it my own.
1. First I read setting the -Djavax.net.ssl.trustStore in the VM arguments.
2. Then I find out the the -D is just for setting something like a static property.
3. Next I want to read about the system properties. Who, what and where the Java tries to get this system property. I do not find it.
What I find is great help in these forums and solving this kind of problems seems easy... I googled and the only place I found info about this is in a boulder.ibm.com site:
http://publib.boulder.ibm.com/infocenter/iseries/v5r4/index.jsp?topic=/rzaha/sysprop2.htm
http://publib.boulder.ibm.com/infocenter/iseries/v5r4/index.jsp?topic=/rzaha/rzahajssesysprops.htm
I also found some info on a sun tutorial but not an official documentation. Do you know where to find it? It seems that my learning is always about finding the right place to find information and not guessing and trying.
Thanks!!

Thanks for your soon reply. Yeah, I found that but I really was expecting a more serious documentation.
I have to admit that it is documented. Yes. But I didn't expect to find that in middle of a guide. But more in a reference or in a specification document. It's inside the "Customization" and in a table, yes... But it's a guide!!
I like Java but something to worry about is the "too many - too less" documentation. Documentation is not clear enough and all the hundreds of options you have can make the programming with Java no good. It would sound like a good thing have a lot of choices and hundreds of places to look info for but I am a bit disappointed with that. It's not clear enough to find the right info.
Anyway, thanks a lot for your help!! I will have to live with that.
Guide: http://java.sun.com/j2se/1.5.0/docs/guide/security/jsse/JSSERefGuide.html

How to calculate the last selected item in a tree node where we can customize the list to the node.

Hi,
I'm new to the Flex field. I got a task where i have a tree (TREE is the id) with X and Y as nodes. In X i have got a list of pages(dataprovider is array collection) added dynamically(means User can configure the pages).On selecting last item(last page) in the list of X node, the view will be presented with a component say Xlast on the right side which is in view stack. In that component , there is button called NEXT which has to be greyed out for the last page. I tried by calling the below code on viewChange event
if(viewstack.selectedchild == XlastpageId)
Nextbtn.enabled = false;
but this will work only when we know XlastpageId is the lastpage for the tree. but how to implement this when we dont know which is the last page of the X node in a Tree.
I also tried by calculating the children of the tree on tree click event which is
if (Tree.selectedItem == TREE.numChildren - 1)
Nextbtn.enabled = false;
i know this is wrong because we have 2 children for the tree( X and Y) so it is showing 2-1 and the button is greyed out for the first click.
Please help me out.
Thanks in Advance,
Sw

Hi,
According to your post, my understanding is that you want to monitor the last login user’s details.
There is no out of the box way to achieve it in SharePoint.
We can use cookie to be a flag for checking whether there is an user just log in. After the page loaded, if the cookie is null, it suggests that there is an user just log in our site, then we
can get this user’s information using JavaScript Object Model and add the information into a custom list. With this list, we can monitor user’s login details.
Refer to the following link:
https://social.technet.microsoft.com/Forums/en-US/0cd4d531-cb61-4d90-aa70-413267f4a735/how-to-know-login-and-logout-details-of-a-user-in-sharepoint-online-2013?forum=sharepointdevelopment
Besides, here are two similar posts for your reference:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/1a35283e-0f2a-49b8-b330-801a3cfcd890/programatically-get-all-current-logged-in-users-list-for-a-sharepoint-site?forum=sharepointdevelopmentprevious
https://social.technet.microsoft.com/Forums/en-US/10953be3-cb1c-40c7-9454-545c8338b551/how-to-know-login-users-count-and-their-details-in-sharepoint-2010-web-application?forum=sharepointgeneralprevious
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Can I print a 2 page spread to .PDF from a CS 3 document where the rest of the pages are NOT spreads

Since I do not know how to really describe this, please have a look and tell me how (if it's possible) if I can print (to PDF) this catalog where the pages (4) and (5) can remain as a spread and the rest of the document would print single pages. I can print this as a booklet, but it's sideways online. Our goal is to have our customers able to view the PDF online and get its full impact. We really can't do that viewing it sideways OR by having the pages 4 and 5 split up like they are.
http://provsnusa.com/pdf/Product%20Guide_GenRec_WEB_CURRENT_VERSION.pdf
The problem we're having is we would like to NOT break-up pages 4 and 5. We want this to look good for the users.
Is it possible to have 1 spread only display all the way across - in other words, is there a way to NOT split up just pages 4 and 5 in this document? The only way I know is to print ALL the spreads.
I tried: Creating the PDF with all the spreads, it does not look as good, but at least the 2 page spread is not broken up (4 and 5).
But now if I go to print the PDF with ALL spreads, then it does not print properly on letter sized paper. Are there settings I can embed where this will print properly where the end user does not have to make adjustments - i.e. We want the end user to be able to just hit "print" and it's done.
I tried: I also created this InDesign CS3 document as a PDF booklet. While this is OK, it appears sideways online to the viewer which is not desirable in this case. Is there a way where the end user can view this correctly as a booklet online without printing?
I guess as an alternative, I can upload the booklet for printing, and another version for viewing.
Maybe there's a special web based PDF viewer out there or something - I'm very ignorant here.
Any suggestions would be very helpful
Sorry for the long wind - hope I've made sense.
Dan

Why not reconstruct the pages in InDesign they way you want the double pages to appear. There may even be an imposition script available that will do the trick. You could then output to pdf all the pages you want the full spread on. Leave the original to create the pages you wanted left as is.
You can ask in the ID forum about an imposition script. I know there was one with CS4, there may have been one with CS3.

Am new at pages and cannot figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph. Word was much easier for me

Am new at this forum and also at pages and can't figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph. I found word much easier to use. Please help. Trying to do a resume.

On a US keyboard it is Option + 8 (above the letters). •

Where is the Moderator of the Forum?!

Similar Messages

Maybe you are looking for