Where is the "Reject" label stored

Is the "Reject" label stored in the IPTC or XMP files? If so, what is it's variable name? I'm trying to kludge a couple of other viewers (which have some attributes that Bridge does not) so that they will show the "Reject" label in a manner similar to Bridge. They will correctly emulate the other colors and text labels, but don't recognize the "Reject" option.
And no, I don't want to give up Bridge because it also has unique attributes, especially Mini-Bridge.

And no, I don't want to give up Bridge because it also has unique attributes,
Nobody here wants you to that, maybe they will advice you not to use other
viewers
especially Mini-Bridge.
Not quit what it should be yet but still at first version and yes it has
great potential!
As for your question, I believe the ratings are stored in the file itself
and I have no real knowledge about scripting but maybe that would be your
route.
I use DNG files (converted from CR2 files) and ratings can be found in the
XMP data using file info (either through PS or using Bridge).
Look under the tab 'Raw Data' and somewhere halfway you will see a line
containing the rating.
Reject is shown as a -1 ( <xmp:Rating>-1</xmp:Rating> )
If you used labels this info is shown underneath this line.
Strangely enough no label is not shown while no rating always shows as
Rating>0<
Hope this helps you somewhat. Don't know how the standard for rating is,
maybe Bridge uses the correct one and others not, maybe its just the other
way round. Sadly enough labeling is not always working between different
apps, even not in Bridge itself using different languages. When having used
rating in other language version they usually show white after using other
language.

Similar Messages

When target DB is down in which table is the data from source is stored, also where are the error messages stored in ODI

When target DB is down in which table is the data from source is stored, also where are the error messages stored in ODI( I am not getting any error message in E$_TARGET_ANI_TEST).
When i am running the interface i am getting the below error against the errored step
"ORA-01045: user ABC lacks CREATE SESSION privilege; logon denied."
Only E$_TARGET_ANI_TEST is created with no data. No such tables like C$_0TARGET_ANI_TEST, I$_TARGET_ANI_TEST are created and also data is not inserted in the target table TARGET_ANI_TEST.

Hi,
I have checked that only E$ table is created. C$ and I$ table are not created ( I have selected my target schema as the part for the staging table).
All the parameters for dropping the tables are selected as "<default>:false".
I am importing the following KMs with the following parameters:
1) CKM Oracle
DROP_ERROR_TABLE
:false
DROP_CHECK_TABLE
:false
CREATE_ERROR_INDEX
:true
COMPATIBLE
:9
VALIDATE
:false
ENABLE_EDITION_SUPPORT
:false
UPGRADE_ERROR_TABLE
:false
2) LKM SQL to SQL
DELETE_TEMPORARY_OBJECTS
:true
3) IKM SQL Incremental Update
INSERT
:true
UPDATE
:true
COMMIT
:true
SYNC_JRN_DELETE
:true
FLOW_CONTROL
:true
RECYCLE_ERRORS
:false
STATIC_CONTROL
:false
TRUNCATE
:false
DELETE_ALL
:false
CREATE_TARG_TABLE
:false
DELETE_TEMPORARY_OBJECTS
:true

Where are the MMB files stored in unix box

Hi all,
Can anyone tell where are the MMB files stored in unix box. Thanks in advance.
Regards,
Sandeep V

Hi Thomas,
Thanks for the reply, I got the FNDMENU.mmb file , but Iam not able to find the menu item which Iam searching for. There are some special menu items like SPECIAL , SPECIALB and SPECIALC. So, when I select release from plan menu item special27 is called , but Iam not able to find release in this menu. Can you please help me in this regard.
Regards,
Sandeep V

In transaction scase, where is the field 'status' stored ?

Hi
in transaction scase, where is the field 'status' stored (in Hdr. data), for a specific BP ?
thx.
Edited by: avijit saxena on Nov 12, 2008 10:10 PM

table>srmprotocol>filter on [ACT_ID] 'attribute change'>choose colom 'arg_string'->filter on 'stat_orderno'

Where is the connection information stored for Mac Remote Desktop?

I want to restore Mac Remote Desktop connection information from a Time Machine backup to a new Mac. On the new Mac, I've installed Remote Desktop from the App Store and installed all the files found in
~/Library/Containers/com.microsoft.rdc.mac from
a Time Machine backup. But I don't see my old connections. I also don't see any connection information in my Time Machine backup here
~/Documents/RDC Connections.
Where is the connection information stored?

The path is correct. You could try to get an console log during application launch. This log might give you information why the information is missing.

Where is the account picture stored after initial setup?

where is the account picture stored after initial setup?

Are you looking to change the image? If so go to system prefs, go to accounts. You'll see the image that you see at login, by clicking on it you'll be given a drop down with all the images which you can select a different right there. If you go to the root directory in the libray folder you'll see a folder user pictures they are in there. The root directory is the main device on your hardrive, you can open finder and see it listed in the sidebar. Hope this helps!
Joseph

Where is the network setup stored?

Hi all
My time capsule died and I bot a airport extreme. The setup went automaticly but I lost my old parameters.
Where are the network prefs stored? I would like to go back with time-machine and to see my old network-setup.
Thanks in advance
kk

Yes my computer backups automaticly - thanks god for time-machine ,-)
I have a static IP (as well as dynamic as it seems) and a server behind a firewall-setup. Thats why I would like to check back my old setup and prefs. But since Airport Express did everything automaticly - they are gone...

Where is the page name stored

We have a desktop definition in production, but wants to change the name on a couple of Pages while being in production. I've tried to snoop around in the Portal database tables to find the name of the pages, but could only find the Page Label (stored in PF_PAGE_DEFINITION), but not the actual name.
The portal admin wouldn't allow me to change the page name when the page already is created from a .portal file. Since we're in production, we really don't want to recreate the desktop definition.
Anyone got a suggestion?
Trond Andersen, Invenia AS, +4798290811

All titles are internationalized
L10N_RESOURCE
you can find the correct record by tracing through the INTERSECTION_ID

HT5262 where does the information get stored when you back up your i-phone? It just reports its done but I have no idea where to find it if I need it again!

Where does the information get stored when you sync/back up your i-phone. I have no idea where to look if I need it again!
Thanks

You can chhose the backup when you would reset your device. In this case you would get the option, during the set up process, to choose your backup and restore your device from it.
(You can find a few information e.g. size and date of your backup in "Settings > iCloud > Storage & Backup > Manage Storage")

Quick qs: Where is the Reconciliation Policy stored under debug?

It seems whenever we import files into IDM, we accidently step over the reconciliation policies set up for various resources. And I do not know where these are stored - which xml files?
I initially thought that these are in the resources themselves - but I was wrong, because even if I do not import the resources, the reconciliation policies are erased.
Please let me know where are the reconciliation policies stored in IDM?
Thanks ia

Thank you - I think that was what I was looking for.
A

ASA5510: where is the startup-config stored?

Hi,
i'm new to cisco's asa and trying to get used to it. it's not a real problem i have, which detains me from productive work but i'm just snoopy about this. on my cisco 871, when i do a
dir nvram:
i see a file called startup-config. but i can not find it on my asa 5510. i have a disk0-1:, flash: and system: but nowhere a startup-config. but it must be somewehre because a
copy tftp startup-config
is working somehow and does what i expect. furthermore, where are the cryptographic keys stored. the same issue. i can not find them. maybe someone of you is able to point me to this. thanks.
ct,

The startup configuration for single mode or for the system in multiple context mode is a hidden file in flash memory. From within a context, the location of the startup configuration is specified by the config-url command. For example, if you specify an HTTP server for the config-url command and then enter the copy startup-config running-config command, the security appliance copies the startup configuration from the HTTP server using the admin context interface.
Also check the details about the commands "copy" and "configure-url" in the links below: 1)COPY--http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/c4.html#wp2104587
2)CONFIGURE-URL----http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/c4.html#wp2100481

Where are the Safari passwords stored in OS X 10.6.8?

Where are the Safari passwords stored in OS X 10.6.8?

Check out applications/utilitiies/keychainchain utilities
Look thru and fin what you are looking for

Where Are The Master Files Stored For iWeb?

I can't seem to figure out where the master files are stored in iWeb. For example I was trying to help of friend with his iWeb website, so I told him to send the files - and then I was planning to load them into iWeb on my computer... but I couldn't figure out where to put them... and he did not know where they were either!
Question: Where are the master files stored for iWeb?

http://docs.info.apple.com/article.html?artnum=303670
http://iWebFAQ.com/1Site2Computers
http://iWebFAQ.com/#Backup

HT4137 When I back up my iPhone using iTunes, where does the information get stored?

I have a problem.
I have an iPhone that has already been synced with an HP laptop. This PC is now in need of repair but the price of repair was too costly so I bought a MacBook Pro to replace it.
I would like to now sync my iPhone with my new MacBook using iTunes but when I attempt this I get a message stating that all the information in my iPhone will be replaced by all the information in iTunes (which is nothing). I cannot afford to lose all the information in my iPhone but also I cannot update my iPhone using iTunes because it has not been paired with my new MacBook and I am told that it can only be paired with one computer at a time. I cannot unpair it with my old PC because my old PC doesn't even boot up anymore.
I was told that I could Backup the information in my iPhone by control clicking on the icon in the toolbar to the left of the iTunes screen which would then let me sync safely. I have now done this but I still have nothing to show for this in the iTunes library (no music, photos, notes, contacts etc.) and I have no idea where this backup has been stored.
Also in the help menu in iTunes it says that media files such as songs, videos and some photos AREN'T backed up but can be restored by syncing with iTunes (how is this possible to restore something that hasn't been backed up in the first place?).
I am really stuck with this and hope that someone out there can help.
Leigh

The first step in the sync process is to create a backup. On a mac this backup is located at
~/Library/Application Support/MobileSync/Backup. The backup does not included iTunes media as it is assumed to be in the iTunes library you are syncing with. Also, as you have discovered, when you first sync with a new iTunes library iTunes will erase all iTunes media on the phone (music, videos, etc.) and replace it with the media in the library you are syncing with. Photos from Camera Roll (which are taken by the phone) are part of the backup. Photos in Photo Library (which were synced to your phone from your computer) are not; again, because it is assumed they are already on your computer as that is how they were synced to your phone in the first place.
What, exactly, is still on your phone at this point?

Where are the actual documents stored in solution manager (KW)?

Hello,
I have a question regarding Solution Manager and storing documentation.
When we in our process structure in a project uploads a word document
(as documentation), where are the file then physically stored?
I have checked the table SA01PHIO (a KW table), here I see a new entry every time I
upload a new word document (or other type of documentation). But this
table does not grow accordingly to the size of the word documents I
upload, so the physical document must be stored somewhere else in the
database.
The description of field 'PHIO_ID' in table SA01PHIO is "Physical document", but since the field is of type char (size 32), then it can only be a link to the actual file?
We need to know where the documents are stored, so that we can plan our
storage strategy and database space management accordingly.
Anyone knows where the files are stored in the database?
Thanks in advance.
Regards

Samuli,
Thank you for your help.
After further searches, I have found exactly what I was looking for.
Samuli, as you said, documents are stored in table SACONT01, but I did not understand how they were stored, as all the data you have in this table is something like:
FF06010102028000343130320000000074040000121F9D02A37D7259692086C2F0D7761017222...
So the information can be benefit to other people searching, I will share it here.
The string of alpha-numeric characters you see above is a "part" of the document.
Document data is cut into clusters, and stored in table SACONT01 (in field CLUSTD, coupled with CLUSTR).
In order to retrieve all the clusters for a given document, you need to get its logical ID (LOIO - LOgical Information on Object):
- Select the document (SOLAR01/02 for projects, SOLMAN_DIRECTORY for solutions)
- Enter DOC_INFO in the transaction code field
- Copy the Object ID
In table SA01PHIO, retrieve the physical id(s) from the logical id (PHIO - PHysical Information on Object).
Search SACONT01 with the physical id(s).
Just as an example:
- 340 entries for a Word document (about 50 pages)
- 57000 entries for a video (200 MB)
Hope it will help.
Regards,
Rémi.

Where is the "Reject" label stored

Similar Messages

Maybe you are looking for