Where is the Taking an NI-DAQmx Measurment in LabVIEW tutorial

Hello
I am new user to LabVIEW and I am using the LabVIEW 7 Express (
Evaluation Software) to learn more and see if we can use this in our
research group. However, when I got to section 4: Acquiring Data and
Communicating with Instruments, I got stuck.
1) I can not find the Tutorial " Taking an NI-DAQmx Measurement in LabVIEW
2) I can not find the DAQ Assitant in my output palette.
Can some one help me plzzzzzzzzzzzzzzzzzz

Hello kurt
Thank your for your quick reply to my question, However, it did not work and It seems like I have some other problems.
I have installed the LabVIEW 7 Express on my machine. as I mentioned it is a Evaluation version. ( v7.0)
I also installed the NI-DAQmx Base on this PC. My major question is
this: In order to run this tutorials, do I need to have my DAQ card
installed on this machine as well ???? or the tutorial is not related
to the the DAQ card.
1) you told me I should see the : "Go to help
drop down menu in either block diagram or front panel > Taking an
NI-DAQmx Measurement in LabVIEW: In this tutorial, you create a voltage
measurement task using the DAQ Assistant.
You can manually navigate to this on your system at C:\Program Files\National Instruments\LabVIEW 7.1\help"
When I open a new VI and go to help, I do not see this option under it. I do not see any turorial uner that.
2) Also, I see foler with the name of lab view 7.1 but there is not
short cuts to that so I am not able to run that.( all I can run is the
7.0 evaluation version).
What am I doing worng??

Similar Messages

NI-DAQmx support for labview could not be found

Hi, I am pretty new to LabView. I was using VC++ to programming for my USB-6215. Just curious how LabView works, so I try to follow the "Introduction to Taking an NI-DAQmx measurement in LabView" and configure my USB-6215 in LabView. However, when I try to gererate codes for the DAQmx task name control, an error message pop up as "Error:NI-DAQmx support for labview could not be found. Please reinstall NI-DAQmx". I did reinstall NI-DAQmx, but it doesn't help. This error occurs anyway. Any idea how it happens and the solution is highly appreciated. Thank you.
Jingyu

See attached
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA
Attachments:
MX picture.PNG ‏35 KB

Where are the Image Properties located?

Where are the Image Properties located? Recently watched a tutorial that suggested right clicking an image to see the Image Properties window. However, I am not seeing it. I am looking to add Image descriptions for better SEO. Thank you

Hello,
Is that image used as a fill in a rectangle ?
If you right click in a Image frame you will the option for image properties. look at the screnshot.
If you right click on a recangle that has an image used as a fill then you will not the option for image properties. look at the screnshot.
If there is anyother scenario you are talking about please let me know and i will look in to it.
Regards
Vivek

Where is the measuring tool in Acrobat XI?

Where is the measuring tool in Acrobat XI?

yes i just found it. I had to get rid of the common tools box and go to view then tool sets. Thanks for the response.

Why is it that on a 5s you can by pass all security measures via Siri, where as the 4S asks for an unlock?

On a 5s you can by pass all security measures via Siri, where as the 4S asks for an unlock. Why?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running google maps app on the phone. Siri cannot seem to get me to a specific address. Where does the problem lie? Thanks.

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running Google Maps app on the phone. SIRI cannot seem to get me to a specific address. Where does the problem lie? Also can anyone tell me the hierarchy of use between the Apple Maps, SIRI, and Google maps when the app is on the phone? How do you choose one over the other as the default map usage? Or better still how do you suppress SIRI from using the Apple maps app when requesting a "go to"?
I have placed an address location into the CONTACTS list and when I ask SIRI to "take me there" it found a TOTALLY different location in the metro area with the same street name. I have included the address, the quadrant, (NE) and the ZIP code into the CONTACTS list. As it turns out, no amount of canceling the trip or relocating the address in the CONTACTS list line would prevent SIRI from taking me to this bogus location. FINALLY I typed in Northeast for NE in the CONTACTS list (NE being the accepted method of defining the USPS location quadrant) , canceled the current map route and it finally found the correct address. This problem would normally not demand such a response from me to have it fixed but the address is one of a hospital in the center of town and this hospital HAS a branch location in a similar part of town (NOT the original address SIRI was trying to take me to). This screw up could be dangerous if not catastrophic to someone who was looking for a hospital location fast and did not know of these two similar locations. After all the whole POINT of directions is not just whimsical pasttime or convenience. In a pinch people need to rely on this function. OR, are my expectations set too high?
How does the iPhone select between one app or the other (Apple Maps or Gppgle Maps) as it relates to SIRI finding and showing a map route?
Why does SIRI return an address that is NOT the correct address nor is the returned location in the requested ZIP code?
Is there a known bug in the CONTACTS list that demands the USPS quadrant ID be spelled out, as opposed to abreviated, to permit SIRI to do its routing?
Thanks for any clarification on these matters.

siri will only use apple maps, this cannot be changed. you could try google voice in the google app.

Where is the "blur kernel" one click deblur in Photoshop CS6?

Where is the "blur kernel” one click deblur in Photoshop CS6? (Pretty sure it’s not there.)
Is deblur still in development? Or was it killed? Is there any status update on the progress of the deblur function? An overwhelming majority of the information available reference the same October 2011 Adobe Max conference demo.
(Adobe showed off the new deblur prototype at its Adobe Max conference in October during a set of feature sneak peeks...)
The way the feature was described was:
"The prototype feature uses a computer algorithm to analyze how the image was blurred and then creates what Adobe called a "blur kernel." After the kernel is generated, it can show you information such as what the motion trajectory of the camera was while the shutter was open -- causing the blur in the first place. The next step is to simply hit a "restore sharp image" button and the photograph is fixed."
It was cited by some sources as being an upcoming Photoshop CS6 feature while other sources were more vague with statements resembling "It's not clear if or when the new unblur feature will make it into a future version of Photoshop, as the company warned all sneak peek features were just prototypes with no concrete product plans."
Where is the latest with the Adobe Photoshop "blur kernel” and the Adobe Photoshop one click deblur feature?

one of the things I think about as an engineer is that in order for something like this to work, you should probably start with manuals adjustments to processing the the out-of-focus blur first. after you have finished with this, you can do the motion blur. I would have to really think hard about it to see if there is an algorithm such as a kernel or something to convert an image into a path. one problem is you are stuck with the image boundaries. if they weren't there, things would be so much easier (but it would also take infinitely long to process). the image boundaries MIGHT skew the kernel, depending on how you handle the boundaries (for example, usually you just assume those values are black or 0's, or you may choose a 50% gray, whatever fits best with the kernel you are working with).
adobe may be on to something there, but they only had half of the equation with the idea.
I used to tinker with image processing many yarns ago back for fun in BASICA/GWBASIC.
if you have the kernel
[-2 0 2]
[-2 0 2]
[-2 0 2]
which amplifies vertical lines, you would want to handle the boundaries by processing them as 0's.
NOTE TO ADOBE: it might start getting into Machine Vision technology when you start doing the path recognition. or AI.
if you can get the imge into a path kernel, it's essentially a bitmap of a path. you can trace that path using akima spline curves. (will lose 1-2 samples off each end), but the tracing program might just exist out there somewhere. just google "bitmap to akima spline curve". and akima spline curve has all the
points along its path, unlike a bezier. I like akima spline curves, I have been trying to get ps engineers to use them for a while for good reason. this is one of them.
there are also cubic splines as an alternative.
chances are that the curve will have rounded corners due to the weight of the camera.
now that you have the path,it's simply a matter of taking samples along the curve wherever you want. (usually in an array which you can linearly inerpolate across the points in the array for simplicity if you want)

Where is the setting in LR 2.0 to turn on the view the embedded jpg file instead of rendering a thum

Where is the setting in LR 2.0 to turn on the view the embedded jpg file instead of rendering a thumbnail image from the RAW file?

Doug, this is a user to user forum so you get advice here from other users just like yourself.
AFAIK LR will show the embedded jpeg until it renders its own preview after that there is no way to get it to show the embedded jpeg.
When you are importing photos into LR in the import dialog box there is an option to show a preview of the embedded jpeg while the import is actually taking place.
Also this is the regular LR user to user forum and there is a link to the LR 2.0 Beta forum at the top of this forum. Maybe its best to post your question there.

Where's the "System Temp" probe? (K8T-Neo)

Where is the "system temp" probe located, and what does this measure? I've seen other posts asking this question and I can't see a definitive answer.
The reason I ask is this:
I've got a nice copper Zalman heatsink that keeps my cpu cool, around 30 idle and 40-45 under load. The "system temperature" is always hotter than the cpu, at least 40 and can get up to 50. I stick my hand in the case and the air is no where near that hot, so I figure its reading the temp of some chip on the board, ie the northbridge (ok I know its not really the nb, but lets just call it that.)
I stuck a 4cm fan on the stock passive nb heatsink and this had very little affect on the "system temp." So either that temp probe is not on the nb or the stock heatsink is just lame. Anyone got any ides?
Another question --- what does the V-Link DATA 2X bios setting do? I've read that enabling it greatly improves "system performance." But when I disable the SATA controller (as I have no SATA drives) the V-Link option becomes greyed-out, like the v-link only has to do with SATA. Does it affect anything if I'm not using SATA?
Scott

Hi
The Winbond chip at top of board above Dimms and Bios monitors the temp, if there is hot air coming from the HDD bays, as chip is right under end of drive as a rule, just where all the cables and things are most likely to interupt air flow. it can affect the temps. Its a good idea to direct air from a fan to that point.
Cheers
jocko

Why does the Measurement Studio C Tutorial require a SHSQL.DLL?

Running the Measurement Studio C++ Tutorial the first time, I get a "requires SHSQL.DLL" error message on execution. I'm under NT 4.0, SP6. Visual Studio 6, SP5. Looking at the Microsoft site, they say SHSQL.DLL is a symbol handler for SQL. Why would a graphical control of a sine wave generator require SQL code at all? And if its truly required, where do I obtain this file?

This DLL must be required by MFC projects and should be installed with Visual Studio. I have no idea why you don't have it on your system, but it should be in the Visual Studio folder under Common\MSDev98\Bin. I attached my copy to this message (I'm using WinXP), but if that DLL is missing there is likely other missing files and issues. I would recommend reinstalling Visual Studio.
Best Regards,
Chris Matthews
National Instruments
Attachments:
SHSQL.DLL ‏33 KB

Where is the ipad backup kept

where is the ipad backup kept

<Profile>\<AppData>\Apple Computer\MobileSync\Backup
And on the assumption that your supplementary question is "It's taking up too much room on my C:\ drive, how do I move it?"...
You can redirect <Profile>\<AppData>\Apple Computer\MobileSync\Backup to a folder on another drive using NTFSLink (shell ext., might only work on XP) or Junction (cmd line tool).
In essence you move the existing folder to a new location, create an empty folder where the old one used to be, then get the operating system to link the two togther and silently redirect any file operation on the old location through to the new one.
tt2

Where is the the "Library pop-up menu near the top of the iTunes window."

Need some some help with music sharing. Where is the "the Library pop-up menu near the top of the iTunes window." ?
Will this work with a Windows laptop running iTunes?
/m

leroydouglas wrote:
Preview> under View you can open Show the tool bar.
You may have to drag the image wider in order to see the instant alpha tools etc on the right side.
There are 2 short cuts:
shift-command-\ ( same as command-| )
shift-command-a
Hi Leroydouglas
Thank you for your reply.
leroydouglas wrote:
Preview> under View you can open Show the tool bar.
First thing I tried. Made no difference.
leroydouglas wrote:
You may have to drag the image wider in order to see the instant alpha tools etc on the right side.
Interesting point. As I said, I have done all this of course,. Hence I doubted my interpretation of the Help Page instructions.
However I find, even now, that when I drag the right edge of the window over to what would be half way across my second screen if it were connected (it is disconnected right now because the monitor has died and I haven't replaced it yet) still all I can get are the options as far right as the crop tool. That's it.
There are 2 short cuts:
shift-command-\ ( same as command-| )
shift-command-a
I found them to be -
shift-command-\
shift-command-a ( same as command-| )
But, what the heck, who cares? Neither keystroke made any difference.
Might be a clue though?
Again, thanks for taking the trouble to reply, Leroy. Much appreciated my friend.

Where is the scrapbook in FF5

Where is the scrapbook in FF5. It used to be a separate item in the menu but I can't find it

Under the "View" menu. The icon on the bottom right hand side is, unfortunately, gone as is the one for Visualizer.
On a personal note, I don't understand the mentality of taking away useful shortcuts such as those and it frustrates me when Apple does this for no good reason. This is not a case of "Think Different", it's more a case of not thinking at all. At least make it an option/preference that can be enabled....

Where is the Equalizer in i-tunes 7.0 ?

Where is the equalizer in i-tunes 7.0 ?

Under the "View" menu. The icon on the bottom right hand side is, unfortunately, gone as is the one for Visualizer.
On a personal note, I don't understand the mentality of taking away useful shortcuts such as those and it frustrates me when Apple does this for no good reason. This is not a case of "Think Different", it's more a case of not thinking at all. At least make it an option/preference that can be enabled....

Where do the imported clip files go to?

I recently uploaded something into iMovie HD from my camcorder, all the clips appeared in the imovie panel as they should, but I don't want to take up too much of my hard drive space, so I dragged and dropped the files into my external hard drive, all the files went as they are supposed to, I then selected all of the panel clips and hit delete, to "cut" them. But it looks like they are still taking up space on my internal hard drive, so I am wondering where do the files go, I can't seem to find them, I want to throw them away permanently in the trash, but am unable to do so, and it is currently taking up space on the hard drive.
Thanks in advance for the help

I can't remember for sure, but I think iMovie HD (version 5) is the same as version 6 in that it is nondestructive. When you delete clips in iMovie, iMovie still saves the clip in its project files. You can see these clips in the project file, but I don't remember how to access it in iM5. (In iM6, you control click on the iMovie icon and then select 'Show package contents' but I think iM5 was different...maybe more direct. Perhaps someone still using iM5 can advise.
You can create, import and edit iMovies on a properly formatted external drive, but the iMovie application itself must remain on your computer's hard drive.

Where is the Taking an NI-DAQmx Measurment in LabVIEW tutorial

Similar Messages

Maybe you are looking for